-
Creda SO11GW - page 1
Merloni Elettrodomestici UK Ltd, Morley Way, Peterborough. PE2 9JB. 08 25377 00 © 10.2003 Users Instruction & Installation Book for : SO1 1GW SO1 1GB 60cm Gas Oven / Grill ...
-
Creda SO11GW - page 2
If you smell gas: Do not try to light any appliance. Do not touch any electrical switch. Call the Gas Emergency Helpline at TRANSCO on: 0800 111999 In the Republic of Ireland, call the Bord Gaìs emergency line on 1850 205050 or contact your local gas supplier. The Gas Consumer Council (GCC) is an independent organisation which protects the interes ...
-
Creda SO11GW - page 3
Data badge Lower part of front frame and rear of appliance. Pressure setting Cat I 2H (GB/IE) G20 @ 20mbar Gas category I 2H Appliance class Class 3 Ignition Mains operated re-ignition generator Oven light 25W Electrical supply 220 - 240V ~ 50Hz, 44W Grill Nominal Rate Qn 2.4kW Injector 1.12mm Spark gap 3 - 4mm Oven Bray type burner, sheet steel bo ...
-
Creda SO11GW - page 4
We hope that the following information will help you to familiarise yourself with the features of the appliance, and to use it successfully and safely. Our policy is one of constant development and improvement. Strict accuracy of illustrations and specifications is not guaranteed. Modification to design and materials may be necessary subsequent to ...
-
Creda SO11GW - page 5
26 Installation Instructions Step 4: Check edging strip The edging strip is factory fitted to the front side edges of the appliance front frame. This strip provides the cabinetry with extra protection from any escape of heat. When installing the product, ensure that the edging strip is correctly located on the outer edges of the front frame, before ...
-
Creda SO11GW - page 6
Glass door panels To meet the relevant Standards of Domestic cooking appliances, all the glass panels on this appliance are toughened to meet the fragmentation requirements of BS3193. This ensures that, in the unlikely event that a panel breaks, it does so into small fragments to minimise the risk of injury. Please take care when handling, using or ...
-
Creda SO11GW - page 7
Step 2: Connect to gas supply 1. The inlet to the appliance is ISO 7 - Rp 1 ⁄ 2 ” internal thread situated towards the top right hand rear corner. 2. Fit the bayonet connection to the wall in the shaded area as shown. The shaded area shown is applicable to installations in minimum depth cabinets. If more room is available, the bayonet fixing ar ...
-
Creda SO11GW - page 8
Caution: Accessible parts may be hot when the grill is used, young children should be kept away. Grill ignition Important: The door must be fully open when the grill is used. Open the door. Push in and turn the grill control knob clockwise to the “on” position. Ensure that the grill burner is alight before leaving it unattended. Do not operate ...
-
Creda SO11GW - page 9
Step 1: Prepare installation Do not lift the appliance by the door handle. Whilst every care is taken to eliminate burrs and raw edges from this product, please take care when handling - we recommend the use of protective gloves during installation. Please note that the weight of this appliance is approximately 31kg (unpacked). Take care when lifti ...
-
Creda SO11GW - page 10
When you are cooking, keep children away from the vicinity of the oven. Oven ignition Push in and turn the oven control knob anticlockwise to gas mark 9. When the oven is switched on the oven light will come on automatically. It can take up to 60 seconds for the oven burner to come on to full rate, and the oven burner may not come on to full rate u ...
-
Creda SO11GW - page 11
Stainless Steel surfaces (stainless steel finish models only) FACIA PANEL , HANDLES , DOOR CLADDING Only use a clean cloth wrung out in hot soapy water, and dry with a soft cloth. Stubborn marks can be removed using “Luneta”. We recommend that you clean the whole of the stainless steel area to maintain a uniform finish. Supplies can be purchase ...
-
Creda SO11GW - page 12
Cooking frozen & chilled foods ● Preheat the oven. ● When cooking frozen or chilled foods, please follow the manufacturer’s instructions. If cooking more than one tray or item, cooking times may need to be increased. ● Please ensure that foods are piping hot before consumption. ● Always use the temperature setting stated on food packa ...
-
Creda SO11GW - page 13
Caution: Any cleaning agent used incorrectly may damage the appliance. Always let the appliance cool before cleaning. Some cooking operations generate a considerable amount of grease. This, combined with spillage, can become a hazard if allowed to accumulate on the appliance through lack of cleaning. In extreme cases this may amount to misuse of th ...
-
Creda SO11GW - page 14
Dish Recommended Shelf Approximate gas mark position cooking times Scones 7 top to middle 8 - 15 mins Meringues “S” (slow setting) middle to bottom 2 - 3 hours Cakes Small cakes 5 middle to top 15 - 25 mins Whisked sponge 5 middle to top 20 - 25 mins Swiss roll 6 middle to top 10 - 12 mins Victoria sandwich 4 middle to top 20 - 30 mins (2 x 180 ...
-
Creda SO11GW - page 15
16 Programmer / Clock 5. Auto symbol appears. 6. The cook time symbol will disappear from the display. 7. The cook time symbol will appear on the display. 8. Fully automatic cooking (example) For use when a delayed start time is required. You want to set the length of cooking time , and the time for the oven to switch off. The programmer will autom ...
-
Creda SO11GW - page 16
14 Programmer / Clock The programmer buttons minute minder cook time end time manual minus plus To set the time of day Press the cook time and end time buttons simultaneously , and keep them depressed. Use the plus and minus buttons to set the required time. Auto symbol goes out. The cook time symbol comes on. To select an alarm tone Press the minu ...
¿Tienes una pregunta acerca de Creda SO11GW?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Creda SO11GW, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Creda SO11GW probablemente compartirá una forma de solucionarlo.