-
Sennheiser 810 - page 1
Set 810 Bedienungsanleit ung Instruction Manual Notice d´emploi Istruzioni per l´ uso Instrucciones para el uso Gebruiksaanwijzing Bruksanvisning set 810_93286_0 106_Sp7.book Seite 1 Donnerstag, 19. April 20 07 4:29 16 ...
-
Sennheiser 810 - page 2
1 English SET 810 Thank you for choosing Sennheiser! Ov er half a century of accumulated expertise in the design and manufact ure of high-q uality audio equi pmen t has made Sennheiser a world leader in the field of audiology. The SET 810 is an assistive listening system for your radio, TV , hi-fi system or similar sound sources at the volume you c ...
-
Sennheiser 810 - page 3
2 English Delivery includes The Set 810 consists of the following components and accessories: - Stethoset receiver RI 810 - Transmitter (charging unit) TI 810 - Rechargeable battery BA 151 - Power supply NT 810 - Connecting cable for headphone output - Adapter for SCART socket (except USA/Canada) - Adapter for RCA sockets (USA/Canada only) - Replac ...
-
Sennheiser 810 - page 4
3 English Connecting the transmitter (charging unit) The rear of the transmitter is fitted with two audio inpu ts: A socket (LINE) for connection to the audio output or the headphone socket on your TV, and a microphone socket (MIC). Plug in one end of the connecting cabl e to the audio output or the headphone socket on your TV, and the other end to ...
-
Sennheiser 810 - page 5
4 English Where to place the transmi tter Place the transmitter so that the infrared light beam is pointed directly at the receiver, i.e. there should be no obstacles in the light path between tr ansmitte r and receiver. Guide the cable s backwards. Avoid exposure to direct sunlight. Direct sunlight may interfere with the reception and may damage t ...
-
Sennheiser 810 - page 6
5 English Using the stethoset recei ver When putting the stethoset receiver on, make sure the opera ti ng control is pointing downwards and the letters are at the front. The stethoset receiver automatically turns on if you pull the earbows apart. set 810_93286_0 106_Sp7.book Seite 5 Donnerstag, 19. April 20 07 4:29 16 ...
-
Sennheiser 810 - page 7
6 English Adjusting the volume Adjust the receiver's volume with the operating control. Make sure your hand d oesn't cover the operating control completely. This may prevent interference-free reception. If you are n ot using the ste thoset receiver, store it on the transmitter so that the batt ery can be recharged . set 810_93286_0 106_Sp ...
-
Sennheiser 810 - page 8
7 English Turning the automatic compression system on Use the COM switch (compression) at the rear of the transmitter to turn the automatic compression system on. This system reproduces soft passages louder and de- creases loud sounds. Choose the setting that suits your listening preferences. Use the MO/ST switch to choose between mono and stereo t ...
-
Sennheiser 810 - page 9
8 English Charging the battery Place the receiver into the transmitter's charging compartm ent, with the operating control at the front. The le ft LED on the transmitter must light up. Charge the battery for 24 hours before you use it for the first time. The normal chargi ng ti me is 4-5 hours. A fully charged battery has an operating time of ...
-
Sennheiser 810 - page 10
9 English Additional information This system uses infrared light whic h is emitted by the transmitter and received by the stethoset receiver. Please note that infrared light emitted by other light sources may interfere with th e useful signal of the SET 810. If the light path between transmitte r and receiver is obstruct ed by clothing such as scar ...
-
Sennheiser 810 - page 11
10 English WARNING : When people use headphone s, they tend to choose a higher volume than with loudspeakers. However, if your hearing has deteriorated and you need to rely on an assitive listeni ng system, please avoid listening at high volume levels for a long time. Please protect your hearing. set 810_93 286_0106_Sp 7.book Seite 10 Donners tag, ...
-
Sennheiser 810 - page 12
11 English Accessories Only use original Senn heiser spare parts and acce ssories. ATTENTION: Components from other manufact urers (e.g. for power supply or battery) may cause damage to the unit and will inval idate the waranty. The following accessories are availa ble from your authorized dealer: Rechargeable battery BA 151 Charger L 151-2 Stethos ...
-
Sennheiser 810 - page 13
12 English BA 151 rechargeable battery By using a spare accupack, you can use the stethoset receiver for more than four hours of continuous operation. Al ways store the spare accupack in the small charging compartment at the right of the transmitter. The right LED on the transmitter lights up green to sh ow charging is taking place. When charging a ...
-
Sennheiser 810 - page 14
13 English RI 810 additional stethoset receiver One transmitter can transmit to severa l receivers. Additional RI 810 receivers are available from your authorized dealer. RI 810 S clip-on receiver Instead of earbows, this receiver features a socket for connecting a headphone or a connecting cable which allows its use with a h earing ai d. MKE 800 T ...
-
Sennheiser 810 - page 15
14 English If problems occur... - Are all jack plugs connected correctly? - Are the re ceiver and sound source turned on a nd is the vo lume of the receiver and sound source sufficient? - Have you pulled the earbows apart? - Is the battery inserted properly into the receiver? - Have you charged the battery for at least 20 minutes? - Are the transmi ...
-
Sennheiser 810 - page 16
15 English Additional information for hearing ai d ac ousticians Adjusting the ea rbow pressure Loosen the screw at the rear of the stethoset receiver. Move the screw in the long hole to the desired position (continuously adjustable). 1 = Low earbow pressure 2 = High earbow pres sure Tighten the screw. Adjustments for hearing disabilities Turn the ...
-
Sennheiser 810 - page 17
16 English Adjusting the max. volume: Potentiometer turned fu lly counterclockwise 0 dB Potentiometer turned fully clockwise 125 dB Adjusting the bass response: Potentiometer turned full y counterclockwise attenuation of -25 dB a t 100 Hz Potentiometer turned fully clockwis e attenuation 0 dB The adjustments can also be made when the receiver is be ...
-
Sennheiser 810 - page 18
17 English Technical Data System Modulation FM, stereo Carrier frequencies 2.3 / 2.8 MHz AF frequency response 40 Hz ....... 15 kHz S/N ratio 60 dB A rms Transmitter AF input voltage 50 mV ...... 5 V Audio input 3.5 mm jack, stereo/mono Microphone socket 2.5 mm jack, mono Charging time for battery approx. 4 h Charging time (spare battery) approx. 1 ...
-
Sennheiser 810 - page 19
18 English Manufacturer declarations CE Declaration of Conformity This equipment is in compliance with the essent ial requirements and other relevant provisions of Directives 2006/95/EC. The de claration is available on th e internet site at www.sennheiser.com. Before putting the device in to operation, please obs erve the respective coun try-speci ...
-
Sennheiser 810 - page 20
Sennheiser electronic GmbH & Co.KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in Germany Publ. 04/07 093286 / A04 set 810_93286_0 106 _Sp7.book Seite 130 Donnerstag, 19. April 20 07 4:29 16 ...
¿Tienes una pregunta acerca de Sennheiser 810?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Sennheiser 810, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Sennheiser 810 probablemente compartirá una forma de solucionarlo.