Español dropdown-ico

Manual de instrucciones Pentax Z10

212 de páginas 6.71 mb
Descargar

Pasar a la página of 212

Summary
  • Pentax Z10 - page 1

    Digital Camera Operating Manual To ensure the best performance fro m your camera, please read the Operating Manual befo re using the camer a. • Specificati ons and external di mensions ar e subject to change without notice. 57932 Copyright © PENTAX Co rporation 2 007 01-200707 Printed in Indone sia PENTAX Corporation 2-36-9, Maeno-cho, Itabashi- ...

  • Pentax Z10 - page 2

    Memo Thank you for purchasing this PENTAX Digital Camera. Please read this manual before usin g the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to unde rstand all the came ra’s capabilities. Regarding copyrights Images taken using the PENTAX Digital Came ...

  • Pentax Z10 - page 3

    1 We have paid close attention to the safety of this product. When usin g this product, we request your special attention regarding items marked with the following symbols. Warning • Do not attempt to take the camera apart or remodel the camera. High voltages are present within the ca mera, and there is therefore a danger of electric shocks if th ...

  • Pentax Z10 - page 4

    2 Caution • Never try to disassemble or short t he battery. Also, do not dispose of the battery in a f ire, or leav e the battery in a high-temp erature locat ion (above 140°F/60°C). The battery coul d heat up, catch fire, or explode. • Do not charge any batteries other than rechargeable lit hium-ion battery D-LI72. The b attery could exp lod ...

  • Pentax Z10 - page 5

    3 • If thunder storm should be present duri ng use of the battery charger or AC adapter, unplug the po wer cord and disconti nue use. Continuing to use t he product can cause damage to the equ ipment, fire or elect rical shock. • Wipe off the plug of the power cord i f it should become covered wit h dust. This can cause a fire . Caution • Do ...

  • Pentax Z10 - page 6

    4 • When traveling, tak e the Worldwide Servi ce Network listi ng that is include d in the package. This wi ll be useful if you experi ence problems abroad. • When the camera has n ot been used for a long time, confir m that it is sti ll working properly, particularly pri or to taking imp ortant pictures (suc h as at a wedding or during traveli ...

  • Pentax Z10 - page 7

    5 • If the camera is subjected t o rapid temperatu re changes, conden sation may form on the inside a nd outside of the camera . Therefore put the camera in a bag or plastic bag, and take the camera out when t he difference in temperature has sub sided. • Refer to “Precautions When Using an SD Memory Card” (p.28) regarding the SD Memory Car ...

  • Pentax Z10 - page 8

    6 USING YOUR CAMERA SAFELY .................................................... 1 Care to be Taken During Handling ................................................... 4 Contents .......................................................................... ................. 6 Composition of the Operating Manual ......................................... ...

  • Pentax Z10 - page 9

    7 Calling Up a Specific Menu ............................................................ 57 Setting the Playback Mode ......................... .................................... 60 Taking Pictures 62 Taking Pictures ................................................................................... 62 Taking Pictures Automatically (Auto Picture ...

  • Pentax Z10 - page 10

    8 Selecting the Focusing Method for Recording Movies ................. 114 Setting the Optical Zoom .............................................................. 115 Playing Back and Dele ting Images 116 Playing Back Images ........................................................................ 116 Switching Between A Mode and Q Mode ............ ...

  • Pentax Z10 - page 11

    9 Recording and Play ing Back Sound 158 Recording Sound (Voice Recording Mo de) .. .................................. 158 Playing Back Sound ......................................................................... 160 Adding a Voice Memo to Images ..................................................... 161 Recording a Voice Memo .................... ...

  • Pentax Z10 - page 12

    10 In this manual, the method for operat ing the four-way control ler is shown in illustrations, such as in the one below. The meanings of the symbols used in this opera ting manual are explained below. 1 indicate s the referen ce page number for an explana tion of the related op eration. indicate s informat ion that is us eful to know . indicate s ...

  • Pentax Z10 - page 13

    11 This operating manual contains the followin g chapters. Composition of the Operating Manual 1 Getting Started ––––––––––––– –––––––––––––––––– –––––––––– This chapter explains what you n eed to do afte r purchasing the camera before you start taking pictures. Be su ...

  • Pentax Z10 - page 14

    12 Camera Features In addition to basic picture-taking , the Optio Z10 has a variety of shoot ing modes to suit d ifferent situations. This section describ es how to make th e most of the key featu res of your came ra. Together with the explanati ons of camera operat ions, it will enable you to enj oy your camera to the full. The Optio Z10 ha s an ...

  • Pentax Z10 - page 15

    13 The user-friendly design of the Op tio Z10 enab les easy operation with only a few buttons. Simply by choosing th e appropriate icon, you can select Shooting mode (p.53) and choose the optimal settings for the situation, or Playback mode (p. 116, p.135) an d enjoy the various playback and e diting functions. A guide on the LCD moni tor lets you ...

  • Pentax Z10 - page 16

    14 With its sporty and sharp design and excellent portability, the Optio Z1 0 is just right to slip into a pocket of your bag or hang round your neck, so you always have it with you, like your cell phone. It has a useful clock function, “Clock Mode” for telling the time too. (p.182) The Optio Z10 lets you play back and edit images wi thout havi ...

  • Pentax Z10 - page 17

    15 Items marked with an asterisk (*) are also available as optional accessories. The battery charger and AC plug cord are only sold as a set (Battery Charger Kit K-BC72). For other optional accessories, refe r to “Optional Accessories” (p.190). Checking the Contents of the Package Camera Optio Z10 Strap O-ST20 (*) Software (CD-ROM) S-SW70 USB c ...

  • Pentax Z10 - page 18

    16 Front Back Names of Parts Shutter release button Self timer lamp (red) Microphone Lens Speaker Lens cover/power switch Flash LCD monitor Terminal cover Card cover Power indicator Tripod socket DC input terminal PC/AV terminal Terminal cover Battery cover ...

  • Pentax Z10 - page 19

    17 Names of Operating Parts Refer to “Understanding the Button Functio ns” (p.43 - p.47) for an explanation of t he function of each butt on. Lens cover/power switch Shutter release button 4 / W button Four-way controller Q button Zoom/ w / x / f / y button Green/ i button 3 button ...

  • Pentax Z10 - page 20

    18 Normal Display in Still Picture Captur e Mode The display shows information su ch as the shooting conditions. Monitor Indications 1 Shooting mode (p.53) 8 Remaining image storage capacity 2 Flash mode (p.87) 3 Drive mode (p.74, p.75) 9 Battery indicator (p.24) 4 Focus mode (p.85) 10 Focus frame (p.39) 5 Camera shake warning (p.83) 11 EV compensa ...

  • Pentax Z10 - page 21

    19 Histogram + Info Display in Still Picture Captur e Mode About the Bright and Dark Portions When there is an area in the frame that is so bright it appears white, the indicated area blinks red as a warning. Similarly, when there i s an area that is so dark it appears black, the indicate d area blinks yellow as a warning. Full Display in Still Pic ...

  • Pentax Z10 - page 22

    20 In Normal Display, A6 and A9 disapp ear if no opera tion is performe d in two seconds. Guide Indications A guide to a vailable button operations appears on the LCD monitor during operation. The buttons are indicated as shown below. A1 Playback mode (p.60) A9 Captured date an d time (p.36) w : Still Picture Playback A10 Four-way controller guide ...

  • Pentax Z10 - page 23

    21 1 Getting Started Getting Started Attaching the Strap Attach the strap (O-ST 20) supplied with the camera. 1 Pass the narrow end of the strap through t he strap lug. 2 Pass the other end of the stra p through the loop and pull tight. 2 1 ...

  • Pentax Z10 - page 24

    22 1 Getting Started Powering the Camera Use the battery charger to charge the battery before usin g it in the camera for the first time or after a long period of non-use, or when the [Battery depleted] message appears. Note: AC plug cord “L isted, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125 V, 7A, mi nimum 6ft (1.8m)” 1 Connect the AC ...

  • Pentax Z10 - page 25

    23 1 Getting Started Use the battery that is provided wit h the camera. Charge the battery before using it in the ca mera for the first time. 1 Open the battery cover. When you slide the batte ry cover out, it springs open. 2 Insert the side of the batt ery with the PENTAX logo pointing toward the back of the camera. 3 Close the battery cover. 1 Op ...

  • Pentax Z10 - page 26

    24 1 Getting Started • Ima ge Storage Capacity, Movie Reco rding Time , Sound Recording Time, and Playba ck Time (at 23 ° C with the LCD monito r on and the battery fu lly charged) *1: Recording capacity shows approx imate number of shots reco rded during CIPA-compliant te sting (with LCD moni tor on, flash use d for 50% of the shots, and 23 deg ...

  • Pentax Z10 - page 27

    25 1 Getting Started Use of the AC adapter kit K-AC63 (optional) is recommended if you intend to use th e camera for a long time or con nect it to a PC. 1 Make sure that the ca mera is turned off and open the terminal cover. 2 Connect the DC terminal of the AC adapt er to DC input terminal of the camera wit h the 2 marks fa cing the same direction. ...

  • Pentax Z10 - page 28

    26 1 Getting Started Installing the SD Memory Card This camera uses an SD M emory Card. Captured images an d sound files are saved on the SD Memory Card if a card is insert ed in the camera. They are saved in the built-in mem ory if a card is not inserted. (p.32) • Be sure to use this camera to fo rmat (initialize) an SD Memory Card that is unuse ...

  • Pentax Z10 - page 29

    27 1 Getting Started 1 Open the c ard cover. When you slide the batte ry cover out, it springs open. 2 Insert the SD Memory Card into the SD Memory Card socket so that t he label is facing towar d the back of th e camera (the side with t he LCD monitor). Push the card in al l the way. Images a nd sound may not be record ed correctly if the card is ...

  • Pentax Z10 - page 30

    28 1 Getting Started Precaution s When Usin g an SD M emory Car d • The SD Memory Card is equipped with a write- protect switch . Setting the switch to LOCK protects the existing data by prohibiting recording of new dat a, deletion of existing data or formatting of the card. r appears on the LCD monitor when the card is write-protected. • C are ...

  • Pentax Z10 - page 31

    29 1 Getting Started Choose the number of pixels (size) and quality level (data compression rate) of still pictures accord ing to how you intend to use the pictures you have taken. Higher quality levels and numb ers of pixels produce clearer images, but the resulting increase in data volume reduces th e total number of pictures that can be taken (s ...

  • Pentax Z10 - page 32

    30 1 Getting Started Choose the appropriate number of re cord ed pixels and quality level for still pictures on the [ A Rec.Mode] menu. Recorded Pixels, Quality Lev el and Image Storage Capacity (Approximate numbers of pictures) • The above figures may va ry depending on the subject, shooting conditions, shooting mode and SD Memory Card, etc. Cho ...

  • Pentax Z10 - page 33

    31 1 Getting Started Appropriate Number of Recorded Pixels Accordin g to Use The defa ult setti ng is m (640×480). Appropriate Qu ality Level Acc ording to Use The defa ult setti ng is C (Best). Appropriate Frame Rate According to Use The default setting is 30f ps (frames per second). Recorded Pixels, Quality Le vel, Frame Rate and Recording Time ...

  • Pentax Z10 - page 34

    32 1 Getting Started Turning the Camera On and Off 1 Open the lens cover. The camera turns on and th e power indicator turns on. If the Ini tial Setting screen appears when y ou turn the camera on, follow the procedure o n p.34 to set the display language a nd/or current date and time. 2 Close the lens cover . The camera turns off and th e power in ...

  • Pentax Z10 - page 35

    33 1 Getting Started Use this mode when you want to play back an image or sound file straightaway without taking any more pictures. 1 Press and hold the playbac k button for two second s. The LCD monitor turns on and the camera starts in Playback mode. Playback Mode To switch from Playback Mode to A mode, op en the lens co ver. Playing Back Still P ...

  • Pentax Z10 - page 36

    34 1 Getting Started Initial Settings Set the language, time , and date after purcha sing the camera before you start taking pictures. The Language/ screen appears wh en the camera i s turned on for the first time. Perform the operations in “Setting the Display Langu age” below to set the language, and in “Setting the Date and Time” (p.36) ...

  • Pentax Z10 - page 37

    35 1 Getting Started 2 Press the 4 button. The Initial Set ting screen appea rs in the selected language. If the desired settings for [Hometown] and dayligh t saving time appear, press the 4 bu tton again to display the [Date Adjust ] screen. Go to “Setting the Dat e and Time” (p .36). Go to Step 3 in “Setti ng Hometown and DST” if the desi ...

  • Pentax Z10 - page 38

    36 1 Getting Started 3 Press the four-way contr oller ( 3 ). The frame move s to [Hometown]. 4 Press the four-way contr oller ( 5 ). The Hometown screen appears. 5 Use the four-way controller ( 45 ) to choose the city. 6 Press the four-way contr oller ( 3 ). The frame moves t o [DST] (Daylight Savi ng Time). 7 Use the four-way controller ( 45 ) to ...

  • Pentax Z10 - page 39

    37 1 Getting Started 3 Press the four-way contr oller ( 5 ). The frame move s to [24h]. 4 Use the four-way controller ( 23 ) to select [24h] (2 4-hour display) or [12h] (12-hour display). 5 Press the four-way contr oller ( 5 ). The frame returns to [Date Style]. 6 Press the four-way contr oller ( 3 ). The frame move s to [Date]. 7 Press the four-wa ...

  • Pentax Z10 - page 40

    38 1 Getting Started When the Initial Setti ng or Date Adjust screen is displayed, you can cancel the setting operation and switch to Capture mode by pressing the 3 button. In this case, th e Initial Se tting screen will appear next time you turn the camera on. If you press the 4 button in Step 9, the camera clock is reset to 00 seconds. To set the ...

  • Pentax Z10 - page 41

    39 2 Quick Start Quick Start Taking Still Pictures The standard pro cedure for taking still p ictures is described bel ow. The flash fires automatically depe nding on the light conditions. 1 Open the lens cover. The camera turns on and is ready to take still pictur es. In this manual, thi s is called Still Picture Capture mode. 2 Confirm the subjec ...

  • Pentax Z10 - page 42

    40 2 Quick Start The shutter relea se button works in a two-step action as follows. Press halfway The focus and exposure are locked when the shutter relea se button is pressed halfway. The green focus frame lights on the LCD monitor wh en the shutter release button is p ressed halfway and the subject is in focus. If the subject is out of focus, the ...

  • Pentax Z10 - page 43

    41 2 Quick Start Quick Start Playing Back Still Pictures 1 Press the Q button afte r taking a picture. The image appears on the LCD monitor. In this manual, th is is called Q mode (Playback mode). Displaying one i mage in full in Q mod e ( Q mode default setting) i s called single-i mage display. Press the Q b utton again in Q mode or press the shu ...

  • Pentax Z10 - page 44

    42 2 Quick Start 1 Press the Q button after t aking a picture. The image appears on the LCD monitor. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 234 5 ) to select s (Image Rotation) and press the 4 button. The rotation s election screen (0° , Right 90°, Left 90°, or 180°) appears. 4 ...

  • Pentax Z10 - page 45

    43 3 Common Operations Common Operations Understanding the Button Functions 1 Lens cover/power switch Turns the camera on and of f. (p.32) A Mode 2 3 4 5 6 7 8 1 ...

  • Pentax Z10 - page 46

    44 3 Common Operations 2 Shutter release button Focuses the camera on the subjec t when pressed halfway in Still Picture Captu r e mode. (Except in 3 , s and modes) (p.39) Takes the still picture when pres sed down fully. (p.39) Starts and stops movie re cording in C mode. (p .107) Starts and stops sound fi le recording in O mode. (p.158) 3 Zoom/ ...

  • Pentax Z10 - page 47

    45 3 Common Operations 1 Lens cover/power switch Turns the camera on and of f. (p.32) 2 Shutter release button Switches to A mode. (p.116) Q Mode 2 3 4 5 6 7 8 1 ...

  • Pentax Z10 - page 48

    46 3 Common Operations 3 Zoom/ f / y button Press f during si ngle-image display to change to nine-I mage display. Returns to the previous di splay when y is pressed. (p.117) Enlarges the i mage when y is pressed during singl e-image display. Returns to the previous di splay when f is presse d. (p.119) Press f duri ng nine-image display to change t ...

  • Pentax Z10 - page 49

    47 3 Common Operations 7 Green/ i butt on Switches from single-ima ge display to the Delete scree n. (p.127) Switches from nine-image di splay to the Select & Del ete screen. (p .129) Switches from folder disp lay to the calendar displa y screen. (p.118) Switches from calendar disp lay to the folder display s creen. (p.118) 8 3 button Displays ...

  • Pentax Z10 - page 50

    48 3 Common Operations Setting the Camera Functions To change the camera se ttings, press the 3 button to d isplay the [ A Rec.Mode] me nu or [ W Setting] m enu. Menus for playing back and ed iting images and sound files are displayed fro m the Playback Mo de Palette. Press the 3 button in A mode to display the [ A Rec.Mode] menu. Press the 3 butto ...

  • Pentax Z10 - page 51

    49 3 Common Operations Ex.) To set the [Quality Level] on the [ A Rec.Mode] menu 1 Press the 3 button in A mode. The [ A Rec.Mode] menu appears. 2 Press the four-way contr oller ( 3 ). The frame moves to [Recorded Pixel s]. 3 Press the four-way contr oller ( 3 ). The frame move s to [Quality Level]. 4 Press the four-way contr oller ( 5 ). A pull-do ...

  • Pentax Z10 - page 52

    50 3 Common Operations 6 Press the shutter relea se button halfway. The setting is saved and t he camera returns to capture status. When the shutter release but ton is pressed fully, the pi cture is taken. 6 Press the Q button. The setting is saved and t he camera returns to playback status. 6 Press the 4 button or the f our-way controller ( 4 ). T ...

  • Pentax Z10 - page 53

    51 3 Common Operations This displays the items that can be set with the menus and provides descriptions of each item. See the list of default settings in the Appendix “Default Settings” (p.184) to deci de whether you want th e settings saved when the camera is turned off an d whethe r you want the settings returned to the defaults when the came ...

  • Pentax Z10 - page 54

    52 3 Common Operations [ W Setting] Menu • Use the Green Mode to enjoy eas y picture-taking using sta ndard settings, reg ardless of the settings in the [ A Rec.Mo de] menu. (p.64) • Assigning freq uently used func tions to the Fn settings men u of the Green button enables you to go straight to the menu. (p .57) Item Description Pa ge Format Fo ...

  • Pentax Z10 - page 55

    53 3 Common Operations The Optio Z10 has a variety of shootin g mo des that let you take pictures or record movies and sound in different situations si mply by choosing the right mode for the particular situation from the Capture Mode Palette. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way co ...

  • Pentax Z10 - page 56

    54 3 Common Operations There are 16 av ailable shooting modes. 1 5 Auto Picture Use this mode to select the bes t shooting mode auto matically. 2 R Program The basic picture-taking mode. You can let the camera set the functions or ch oose various f unctions yourself. (p.63) 3 A Night Scene Ideal for taking nigh t views. It is best to use a tripod i ...

  • Pentax Z10 - page 57

    55 3 Common Operations 8 z Natural Skin Tone Adjusts the color and brightn ess to reproduce skin tone more b eautifully than Portrait mode. 9 e Portrait Use this mode for taking pictures of people. Gives your subject a bright, he althy look. 0 i Surf & Snow For capturing images wit h dazzling backgrounds, such as beaches or snowy mountains. a ...

  • Pentax Z10 - page 58

    56 3 Common Operations d E Pet Ideal for taking pict ures of pets. The camera keeps the moving pet in focus until t he shutter release button is pressed. You can select settings accordi ng to the col or of your pet’ s coat. (p.72) e D Food Use this mode for taking pictures of food. The increased saturati on gives pictures a bright, vivid finish. ...

  • Pentax Z10 - page 59

    57 3 Common Operations If you set the Green Mode in the Green button, the camera enters the Green Mode when you press the Green bu tton. If you set Fn Setting in the Green button, the menu assign ed to the four-way controller is displayed when you press the Green button. This is useful for going straight to the setting screens of frequently used fu ...

  • Pentax Z10 - page 60

    58 3 Common Operations 1 Select [Green Button] on the [ A Rec.Mode] menu. 2 Press the four-way contr oller ( 5 ). A pull-down menu appears. 3 Use the four-way controller ( 23 ) to select [Fn Setting]. 4 Press the 4 button. 5 Use the four-way controller ( 23 ) to choose the four-way co ntroller key to set. 6 Press the four-way contr oller ( 5 ). A p ...

  • Pentax Z10 - page 61

    59 3 Common Operations 1 Press the Green butto n in A mode. The function assigned to [Green Button] on the [ A Rec.Mode] menu is called up. When [Fn Setting] i s called up, the functions assigned to the four-way controller ( 2345 ) are d isplayed. 2 Use the four-way controller ( 2345 ) to select the function you want to change. 3 Change the setting ...

  • Pentax Z10 - page 62

    60 3 Common Operations Press the four-way controller ( 3 ) in Q mode to display th e Playback Mode Palette. You can display the playback function you want to use simply by using the four-way controller ( 2345 ) to choose an icon an d pressing the 4 button. Setting the Playback Mode • When the frame is placed over th e various icons of the Playba ...

  • Pentax Z10 - page 63

    61 3 Common Operations Playback Mode Palette Item Description Pa ge P Digital SR For reducing t he camera shak e in recorded images p.121 u Slideshow For p laying back r ecorded ima ges one afte r another p.12 3 n Resize For changing the reco rded pixels and quality of images p.135 o Cropping Creates an image from a select ed portion o f the image ...

  • Pentax Z10 - page 64

    62 4 Taking Pictures Taking Pictures Taking Pictures In 5 (Auto Picture mode), when you press the shutter release button, the camera selects the most appropria te mode from four shooting modes: - (Standard mode), A (Night Scen e mode), q (Landscape mode) and e (Portrait mod e). 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ...

  • Pentax Z10 - page 65

    63 4 Taking Pictures In R (Program mode), the camera autom atically sets the shutter sp eed and aperture for taking sti ll pictures . However, you can sel ect other functions such as the flash mode and recorde d pixels. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 23 45 ) to se ...

  • Pentax Z10 - page 66

    64 4 Taking Pictures In the Green Mode, you can enjoy easy pictu re-taking using standard settings*, regardless of the settings in the [ A Rec.Mode] menu. 1 Press the Green butto n in A mode. The camera switches to the Green Mode. Press the Green button again to return t o the status before the Green Mode was selected. 2 Press the shutter relea se ...

  • Pentax Z10 - page 67

    65 4 Taking Pictures * The Green Mode settings are as shown below. • In Green Mode, you cannot change the informati on displayed on the LCD monitor by pressing the 4 / W button. • You cannot use the [ A Rec.Mode] m enu or Capt ure Mode Palette in Green Mo de. If you try to display t he [ A Rec.Mode] menu or Capture Mode Palette, - (key lock ico ...

  • Pentax Z10 - page 68

    66 4 Taking Pictures You can choose settings appropri ate for taking pictures of dark scenes, such as nightscapes. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 23 45 ) to select A (Night Scene) or 4 (D igital SR (Blur Reduction)). 3 Press the 4 button. The shooting m ode is sel ...

  • Pentax Z10 - page 69

    67 4 Taking Pictures In this mode you can ta ke pictures using the fram es stored in the camera. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 2345 ) to selec t Y (Frame Composite). 3 Press the 4 button. A 9-frame display of th e frame selection screen appears . 4 Use the four-w ...

  • Pentax Z10 - page 70

    68 4 Taking Pictures In z or e mode, Face Recognition AF and Face Recognition AE are activated. Simply point the camera toward your subject’s face and the camera automatically recognizes the location of the subject’s face, adjusts the focus (using Face Recogn ition AF) and the exposure (usin g Face Recognition AE) and allo ws you to take a pict ...

  • Pentax Z10 - page 71

    69 4 Taking Pictures • If the camera cannot recognize t he location of the subject’s face, the camera f ocuses using th e normal Focusing Area (Multip le). • Continuous Shooting and HS Cont. Shooting cannot be used in z or e mode. • Face Recognition AF and Face Recognition AE may not work if the subject is we aring sunglasses or has part of ...

  • Pentax Z10 - page 72

    70 4 Taking Pictures C (Kids mode) is ideal for taking pictur es of moving children. Also gives them a healthy look. “Face Recognition AF” and. “F ace Recognition AE” are activated. When you point the came ra at your subject’s face, the camera automatically recognizes it, adjusting both focus and exposure. 1 Press the four-way contr oller ...

  • Pentax Z10 - page 73

    71 4 Taking Pictures • Continuous Shooti ng and High Speed Continuo us Shooting cannot be used in C mode. • Face Recognition AE may not work if the sub ject is wearing sunglasses or has part of t he face covered or if the subj ect is not looking toward the camera. • AE meteri ng is set to multi-segmen t metering . • The focus frame of the W ...

  • Pentax Z10 - page 74

    72 4 Taking Pictures Use this mode to keep your m oving pet in focus while you take the picture and capture the color of your pet’s coat. Choose the appropriate icon depending on what color you r pet is (closer to black or white or in between). 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-w a ...

  • Pentax Z10 - page 75

    73 4 Taking Pictures 7 Press the shutter relea se button fully. The picture is taken. In E mode, AE metering is set to multi-segment metering. ...

  • Pentax Z10 - page 76

    74 4 Taking Pictures In Self-timer mode, the picture is taken ten sec onds or two seconds after the shutter re lease butt on is pressed . Stabilize the ca mera with a tripo d when taking a picture with the self-ti m er. 1 Press the four-way contr oller ( 2 ) in A mode. 2 Use the four-way controller ( 453 ) to select g or Z and press the 4 button. T ...

  • Pentax Z10 - page 77

    75 4 Taking Pictures In this mode, pictures are taken cont inuously for as long as the shutter release button is pressed. 1 Press the four-way contr oller ( 2 ) in A mode. 2 Use the four-way contr oller ( 45 ) to select 1 (Continuous Sho o ting) or c (HS Cont. Shooting) and press the 4 button. The camera is re ady to ta ke a series of picture s. 3 ...

  • Pentax Z10 - page 78

    76 4 Taking Pictures You can use th e zoom to change the captured area. 1 Press the Zoom/ w / x but ton in A mode. Zoom button ( w ) : Diminishes the subject (Wide). Zoom button ( x ) : enlarges the subject. When you press and hold the button, the camera automatically swit ches from optical zoom to intellig ent zoom. Once the button is released and ...

  • Pentax Z10 - page 79

    77 4 Taking Pictures Recorded pixels and the maximum zoom ratio Recorded pixels Intelligent Z oom Digital Z oom 8M Not Availabl e (7× optical zoom availabl e) Equivale nt to approx. 35.7× 5M Approx. 8.1× 4M Approx. 8.8× 3M Approx. 9.9× 2M Approx. 11.2 × 1024 Approx. 22.3 × 640 Approx. 35.7 × (Same as 35.7× Digital Zoom) • You are r ecomm ...

  • Pentax Z10 - page 80

    78 4 Taking Pictures The digital zoom is set to O (On) in the default settings. To take pictures using only the optical zoom, set the digi tal zoom to P (Off). 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Dig ital Zoom]. 3 Use the four-way controller ( 45 ) to select O (On) or P (O ...

  • Pentax Z10 - page 81

    79 4 Taking Pictures Capturing a Wide Image Using the Di gital Wide Function Digital wide can stitch two pictures taken into a 35 mm film conversion (equivalent to approx. 28 mm). 1 Press the w side of the Zoom / w / x button when in A mode. Press and hold the w side of the Zoom/ w / x button to set the zoom to the widest position, release the bu t ...

  • Pentax Z10 - page 82

    80 4 Taking Pictures 4 Press the shutter release button. The first captured image is saved, and the shooting screen f or the second i mage is displayed. Overlap the i mage on the preview guide on the left of the scre en to compose your picture. If you want to stop capturing ima ges in the digital wide mode, go to step 6. 5 Press the shutter release ...

  • Pentax Z10 - page 83

    81 4 Taking Pictures 6 Press the 3 button, 4 button, or Zoom/ w / x button. 7 Press the four-way contr oller ( 2 ). 8 Press the 4 button. The Digital Wid e mode stops. The Digital Wide function is set to O (On) in the default setting s. Use the A mode to set whether the camera enters the Digital Wide mode when the w side of the Zoom/ w / x b utton ...

  • Pentax Z10 - page 84

    82 4 Taking Pictures You can adjust the overall brightne ss of the picture. Use this function to take pictures that are intentionally overexp osed or underexposed. 1 Press the 3 button in A mode. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [EV Compensat ion]. 3 Use the four-way controller ( 45 ) to select the EV v ...

  • Pentax Z10 - page 85

    83 4 Taking Pictures Displaying Shooting Information in Capture Mode The LCD monitor display changes in the follo wing sequence each time you press the 4 / W butt on: Normal Display, Histogram + Info, No Info, Backlight Off. For details of each display mode, re fer to “Monitor Indications” (p.1 8). • All the camera b uttons function as normal ...

  • Pentax Z10 - page 86

    84 4 Taking Pictures A histogram shows the brightness distribution of an image. The horizontal axis represents brightness (dark at the left and bright at the right) and the vertical axis represents the number of pixels. The shape of the histogram before and after shooting tells you whether the brightness a nd contrast are correct or not, and lets y ...

  • Pentax Z10 - page 87

    85 4 Taking Pictures Setting the Shooting Functions Focus Mode 1 Press the four-way contr oller ( 5 ) in A mode. The focus mode changes each time the button is pressed. You c an also change the setting using the four-wa y controller ( 23 ). 2 Press the 4 button. The Focus Mod e setting is saved and t he camera returns to cap ture status. Selecting ...

  • Pentax Z10 - page 88

    86 4 Taking Pictures The procedure for setting the focus manually ( ) is described belo w. 1 Press the four-way contr oller ( 5 ) in A mode. 2 Use the four-way controller ( 5 ) to select and press the 4 button. The central portio n of the image is magnified to fill the s creen of the LCD monitor when focus ing. 3 Press the four-way controller ( ...

  • Pentax Z10 - page 89

    87 4 Taking Pictures Flash Mode s Selecting the Flash Mode , Auto The flas h discharges a utomatical ly depending on the light condit ions. a Flash Off The flash wi ll not discha rge, rega rdless of the brightne ss. Use thi s mode to ta ke pictures where flash photograph y is prohibited. b Flash On The flash di scharges reg ardless of th e brightne ...

  • Pentax Z10 - page 90

    88 4 Taking Pictures 1 Press the four-way contr oller ( 4 ) in A mode. The flash mode changes each time the button is pressed. You c an also change the setting using the four-wa y controller ( 23 ). 2 Press the 4 button. The camera return s to capture status with the selected flash mod e. Saving the Flash Mode 1 p.105 Auto A u t o Auto Flash Mode F ...

  • Pentax Z10 - page 91

    89 4 Taking Pictures You can choose from seven recorded pixels settings for still pi ctures. The larger your recorded pixels, t he clearer the details will appear when you print your picture. As the qua lity of the printed picture also depends on the image quality, exposure control, resolution of the p rinter and other factors, you do not need to s ...

  • Pentax Z10 - page 92

    90 4 Taking Pictures 3 Press the four-way contr oller ( 5 ). A pull-down menu appears. 4 Use the four-way controller ( 23 ) to chan ge the num ber of re corded pixels. 5 Press the 4 button. The Recorded Pixels setti ng is saved. 6 Press the 3 button. The camera returns to ca pture status with the curr ent setting. • When shooting mode is se t to ...

  • Pentax Z10 - page 93

    91 4 Taking Pictures You can select the quali ty (compr ession rate) of still pictures. The more stars, the lo wer the compressio n rate and the clearer the picture , but the file size becomes larger. The recorded pixels setting also affects the file size (p.89). Quality Level 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use t ...

  • Pentax Z10 - page 94

    92 4 Taking Pictures You can take pictur es in natural colors by adjusting th e white bala nce according to the light conditions at the time of shooting. White Balance 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [White Balance]. 3 Press the four-way contr oller ( 5 ). The White Bal ...

  • Pentax Z10 - page 95

    93 4 Taking Pictures 5 Press the 4 button. The White Balance setti ng is saved. 6 Press the 3 button. The camera returns to ca pture status with the curr ent setting. Refer to “Manual Setting” bel ow for instructions on adjusti ng the white balance manually . Have a blank sheet of white paper or simi lar material ready. 1 In the White balance s ...

  • Pentax Z10 - page 96

    94 4 Taking Pictures You can set the area of the screen where the brightness is me tered to determine the exposu re. AE metering 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [AE Metering]. 3 Press the four-way contr oller ( 5 ). A pull-down menu appears. 4 Use the four-way controlle ...

  • Pentax Z10 - page 97

    95 4 Taking Pictures • When the shutter rel ease button is pressed halfway, the brightness is metered and the expo sure is determined. • When the subject i s outside the focusing area and you want to use spot AE metering, aim the came ra at the subject and press the shutter release butt on halfway to lock the expos ure, then compose your pictur ...

  • Pentax Z10 - page 98

    96 4 Taking Pictures You can select the ISO sensitivit y to suit the brightness of the surroundings. ISO Sensitivity 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way con troller ( 23 ) to select [Sensitivit y]. 3 Press the four-way contr oller ( 5 ). A pull-down menu appears. 4 Use the four-way controller ( 23 ) t ...

  • Pentax Z10 - page 99

    97 4 Taking Pictures You can choose an automatically ad justed range of ISO sensiti vity from among six ranges: 64 to 100, 64 to 20 0, 64 to 400, 64 to 800, 64 to 1600 and 64 to 3200. The initial setting for the AUTO range is ISO 64 to 800. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way con troller ( 23 ) to se ...

  • Pentax Z10 - page 100

    98 4 Taking Pictures You can set various co nditions for autofocus. You can change the a utofocus area (Focus ing Area). Focusing Area 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way cont roller ( 23 ) to select [AF Setting]. 3 Press the four-way contr oller ( 5 ). The AF Setting screen appears. 4 Use the four-wa ...

  • Pentax Z10 - page 101

    99 4 Taking Pictures 7 Press the 4 button. The AF Setting is sav ed. 8 Press the 3 button twice. The camera returns to ca pture status with the curr ent setting. You can limit the lens focusing range according to the condition s. Set the [Focus Limi ter] to O (On) to limit the focus to far distances from normal range during normal shootin g and to ...

  • Pentax Z10 - page 102

    100 4 Taking Pictures You can choose the Instant Review time (th e length of time the image is displayed immediately after capture) from 0.5sec, 1sec, 2sec, 3sec, 5sec and Off (no disp lay). 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Ins tant Review]. 3 Press the four-way contr o ...

  • Pentax Z10 - page 103

    101 4 Taking Pictures You can give th e image sharp or so ft outlines. 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way contro ller ( 23 ) to select [Sha rpness]. 3 Use the four-way controller ( 45 ) to change the sharpness leve l. The followi ng setting is saved. F (Soft) G (Normal) H (Hard) 4 Press the 3 button. ...

  • Pentax Z10 - page 104

    102 4 Taking Pictures You can set the color saturation. 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way contro ller ( 23 ) to select [ Saturation]. 3 Use the four-way controller ( 45 ) to change the saturation level. The followi ng setting is saved. F (Low) G (Normal) H (High) 4 Press the 3 button. The Saturation ...

  • Pentax Z10 - page 105

    103 4 Taking Pictures You can set the image contrast leve l. 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to sele ct [Contrast]. 3 Use the four-way controller ( 45 ) to change the con trast level. The followi ng setting is saved. F (Low) G (Normal) H (High) 4 Press the 3 button. The Contrast ...

  • Pentax Z10 - page 106

    104 4 Taking Pictures For choosing whether to imprint th e date when taking sti ll pictures. 1 Press the MENU button in A mode. The [ A Rec.Mode] appears. 2 Use the four-way controller ( 23 ) to select [D ate Imprint]. 3 Use the four-way controller ( 45 ) to select O (On) or P (Off). The selecte d setting is saved. 4 Press the 3 button. Setting the ...

  • Pentax Z10 - page 107

    105 4 Taking Pictures Saving the Settings (Memory) The Memory function is for saving the current camera settings when th e camera is turned off. For some camera settings, the Memory function is always set to O (On) (the settings are saved when the camera is turned off), while for other s you can choose on or off (to choose whether the settings are ...

  • Pentax Z10 - page 108

    106 4 Taking Pictures 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Press the four-way contro ller ( 23 ) to sele ct [Memory]. 3 Press the four-way contr oller ( 5 ). The Memory screen app ears. 4 Use the four-way controller ( 23 ) to choose an item. 5 Use the four-way controller ( 45 ) to select O (On) or P (Off). 6 Press the ...

  • Pentax Z10 - page 109

    107 4 Taking Pictures Recording Movies This mode enable s you to record mov ies. Sound is rec orded at the sa me time. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 2345 ) to selec t C (Movie). 3 Press the 4 button. C mode is selected and t he camera returns to capture sta tus. ...

  • Pentax Z10 - page 110

    108 4 Taking Pictures 4 Press the shutter relea se button fully. Recording starts. Reco rding can continue until th e built-in memory/SD memory card is full, or the size of the recorded movie reaches 2 GB. 5 Press the shutter relea se button fully. Recording stops. If you keep the shutter release button pressed for more th an one second, recording ...

  • Pentax Z10 - page 111

    109 4 Taking Pictures You can choose from two recorded pixels settings for movies: m and D . The more pixels th ere are, the clea re r the deta ils and the bigger the file size. The file size also varies depen ding on the quality leve l and frame rate settings. (p.30) Recorded Pixels for Movies 1 Press the 3 button in A mo de. The [ A Rec.Mode] men ...

  • Pentax Z10 - page 112

    110 4 Taking Pictures You can set the q uality level of mo vies. The higher th e quality level, the clearer the detail s and the b igger the file size. Quality level of movies 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Mo vie]. 3 Press the four-way contr oller ( 5 ). The Movie sc ...

  • Pentax Z10 - page 113

    111 4 Taking Pictures You can choose from two frame rates (number of frames per second) fo r movies: 30fps (frames per second) and 15fps. The more frame s per second, the better the qua lity of the movie, but the file size becomes larger. 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to select ...

  • Pentax Z10 - page 114

    112 4 Taking Pictures You can set the color mode to black and white or sepia, as well as full color, when recording a movie. 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Mo vie]. 3 Press the four-way contr oller ( 5 ). The Movie sc reen appears. 4 Use the four-way controller ( 23 ) ...

  • Pentax Z10 - page 115

    113 4 Taking Pictures In C mode, you can compensate for camera shake while yo u are recording movies wi th the Movie SR (Movie Anti-Shake) function. 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Mo vie]. 3 Press the four-way contr oller ( 5 ). The Movie sc reen appears. 4 Use the fo ...

  • Pentax Z10 - page 116

    114 4 Taking Pictures You can set the focusing method us ed whe n recording movies. Select either to always continue to focus on the subject while shoo ting, or to lock the focus in the position select ed by pressing the shutte r release button halfway with the subj ect in focus before shooting. 1 Press the 3 button in A mo de. 2 Use the four-way c ...

  • Pentax Z10 - page 117

    115 4 Taking Pictures You can set whether or not to use the optical zoom during movie recording. 1 Press the 3 button in A mo de. The [ A Rec.Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Mo vie]. 3 Press the four-way contr oller ( 5 ). The Movie sc reen appears. 4 Use the four-way controller ( 23 ) to sele ct [Optical Zoom]. ...

  • Pentax Z10 - page 118

    116 5 Playing Back and De leting Image s Playing Back and Deleti ng Images Playing Back Images In this manual, the capture mode, such as fo r taking still pictures, is referred to as [ A mode]. The playback mode, such as for displaying captured images on the LCD monitor, is referred to as [ Q mode]. In Q mode, you can perform simple editing operati ...

  • Pentax Z10 - page 119

    117 5 Playing Back and De leting Image s You can display nine thumbnails of captured images at a time. 1 In Q mode, press f on the Zoom/ f / y button. A page consisti ng of nine thumbnail images appears. The displayed images change nine at a time page by page. Use the four-way controller ( 2345 ) to move the frame. When 10 or more image s have been ...

  • Pentax Z10 - page 120

    118 5 Playing Back and De leting Image s In nine-image display, press f on the Zoom/ f / y button to switch to folder display or calendar display. Press the Green button to switch between folder display and calendar disp lay. 1 In Q mode, press f on the Zoom/ f / y but ton. The screen changes to nine-image display. 2 Press f on the Zoom/ f / y butt ...

  • Pentax Z10 - page 121

    119 5 Playing Back and De leting Image s You can magnify an image up to e ight times. A guide showing the ce nter of the magnified portion of the image appe ars on the LCD monitor during zoom playback. 1 Enter the Q mode and use the four- way controller ( 45 ) to ch oose the image you w ant to m agnify. 2 Press y on the Zoom/ f / y button. The imag ...

  • Pentax Z10 - page 122

    120 5 Playing Back and De leting Image s Shooting informatio n can be displayed on the LCD monitor in Q mode . Pressing the 4 / W button changes th e display mode. Refer to p.19 for details of each display mo de. Displaying Shooting In formation in Playback Mode Displaying Shooting Information in Capture Mode 1 p.83 OK OK OK 01/01/2007 0 1 / 0 1 / ...

  • Pentax Z10 - page 123

    121 5 Playing Back and De leting Image s For correcting th e camera shake in recorded images. 1 Enter the Q mode and use the four-way controller ( 45 ) to choose the image to correct camera shake for . 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 23 45 ) to select P (Digital SR). 4 Press ...

  • Pentax Z10 - page 124

    122 5 Playing Back and De leting Image s 7 Use the four-way controller ( 45 ) to select [Overwrite] or [Save as]. If the image is protect ed, you can only select [Save as] . 8 Press the 4 button. The corrected image is sav ed to the built-in memory or SD Memory Card. • If you overwri te the image, the shake information is lost, an d you cannot pe ...

  • Pentax Z10 - page 125

    123 5 Playing Back and De leting Image s You can play back recorded images one after another. 1 Enter the Q mode and use the four- way controller ( 45 ) to choose an image to start t he slideshow with. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 23 45 ) to select u (Slideshow). 4 Press ...

  • Pentax Z10 - page 126

    124 5 Playing Back and De leting Image s 3 Press the 4 button. The screen fo r setting the slideshow conditions appears. 4 Use the four-way controller ( 23 ) to select [Interv a l]. 5 Press the four-way contr oller ( 5 ). A pull-down menu appears. 6 Use the four-way controller ( 23 ) to change the interval and press the 4 button. You can choose fro ...

  • Pentax Z10 - page 127

    125 5 Playing Back and De leting Image s Playing Back Movies You can play back the movies you have taken. Sound i s played back at the same time. 1 Enter the Q mode and use the four-way controller ( 45 ) to choose the mov ie you want to play back. 2 Press the four-way contr oller ( 2 ). Playback starts. The followin g operations can be performed du ...

  • Pentax Z10 - page 128

    126 5 Playing Back and De leting Image s Connecting the Camera to AV Equipment By using the AV cable, you can capture and play back images on equipment with a video IN j ack, such as a TV. Ma ke sure the camera and TV are turned off before connecting the camera to the TV. 1 Open th e terminal cover and c onnect the AV cable t o the PC/AV terminal. ...

  • Pentax Z10 - page 129

    127 5 Playing Back and De leting Image s Deleting Images Delete images and sounds with mist akes or th at are unnecessary. You can delete a single image or sound file. 1 Enter the Q mode and use t he four-way controller ( 45 ) to choose the ima ge/sound file you want to delete. 2 Press the i button. The confirmation screen appears. 3 Use the four-w ...

  • Pentax Z10 - page 130

    128 5 Playing Back and De leting Image s If sound has been recorded with an image (p.161), you can de lete the sound without deleting the image. 1 Enter the Q mode and use the four- way controller ( 45 ) to choose an image with sound. 2 Press the i button. The confirmation screen appears. 3 Use the four-way controller ( 23 ) to select [Delete Sound ...

  • Pentax Z10 - page 131

    129 5 Playing Back and De leting Image s You can delete several imag es/sound files selected fro m the nine-image display at once. 1 In Q mode, press f on th e Zoom/ f / y button. Nine thumbnail images appe ar. 2 Press the i button. P appears on the images and sound fi les. 3 Use the four-way controller ( 2345 ) to choose the images and sound files ...

  • Pentax Z10 - page 132

    130 5 Playing Back and De leting Image s 4 Press the i button. A confirmation dial og appears. 5 Use the four-way controller ( 23 ) to select [Select & Dele te]. 6 Press the 4 button. The selected image s and sound files are deleted. Select & Delete Cancel C a n c e l Cancel OK OK O K OK MENU Delete all selected D e l e t e a l l s e l e c ...

  • Pentax Z10 - page 133

    131 5 Playing Back and De leting Image s You can delete all the ima ges and sound file s at once. 1 Press the i button in Q mode. A confirmation dial og appears. 2 Press the i button. A confirmation dial og appears. 3 Use the four-way controller ( 23 ) to select [Delete All]. 4 Press the 4 button. All the images and sound f iles are deleted. Deleti ...

  • Pentax Z10 - page 134

    132 5 Playing Back and De leting Image s You can recover images or sound files that were ta ken with this camera and then deleted. 1 After deleting a file, press the four-way controller ( 3 ). The Playback Mode Palette appears. 2 Use the four-way controller ( 23 45 ) to select ] (Image Recovery). 3 Press the 4 button. The number of reco verable ima ...

  • Pentax Z10 - page 135

    133 5 Playing Back and De leting Image s You can protect stored images an d sound files from being accidentally d eleted. 1 Press the four-way contr oller ( 3 ) in Q mode. The Playback Mode Palette appears. 2 Use the four-way contro ller ( 2345 ) to select Z (Protect). 3 Press the 4 button. The screen for se lecting [Single image/ sound] or [All Im ...

  • Pentax Z10 - page 136

    134 5 Playing Back and De leting Image s 1 Press the four-way contr oller ( 3 ) in Q mode. The Playback Mode Palette appears. 2 Use the four-way controller ( 23 45 ) to select Z (Protect). 3 Press the 4 button. The screen for se lecting [Single image/ sound] or [All Images/Sounds] appears. 4 Use the four-way controller ( 23 ) to select [All Images/ ...

  • Pentax Z10 - page 137

    135 6 Editing and Printi ng Images Editing and Printing Images Editing Images By changing th e size and quality of a selected imag e, you can make the file si ze smaller than the origina l. You can use this fun ction to cont inue taking pi ctures when the SD M emory Card or built-in memory is full, by m aking the i mages smaller and overwr iting th ...

  • Pentax Z10 - page 138

    136 6 Editing and Printi ng Images 6 Press the 4 button. A confirmation di alog for overwri ting the image appears. [Save as] is the only avai lable option for protecte d images. 7 Use the four-way controller ( 23 ) to select [Overwrite] or [Save as]. 8 Press the 4 button. The resized image is saved. Cancel C a n c e l Cancel MENU OK OK O K OK Over ...

  • Pentax Z10 - page 139

    137 6 Editing and Printi ng Images You can delete the unwanted part of a picture and save the cropped image as a separate image. 1 Enter the Q mode and use the four- way controller ( 45 ) to choose the image you want to trim. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 23 45 ) to select ...

  • Pentax Z10 - page 140

    138 6 Editing and Printi ng Images You can copy images and sound file s fr om the built-in me mory to the SD Memory Card and vice versa. This fu nction can only be selected when an SD Memory Card has been inserted in the came ra. 1 Press the four-way contr oller ( 3 ) in Q mode. The Playback Mode Palette appears. 2 Use the four-way controller ( 23 ...

  • Pentax Z10 - page 141

    139 6 Editing and Printi ng Images Selected images and sound files from the SD Memory Card a re copied to the built-in memory one at a time. 4 Use the four-way controller ( 23 ) to select [ {}2 ]. 5 Press the 4 button. 6 Use the four-way controller ( 45 ) to select the file you wa nt to copy. 7 Press the 4 button. The selected image /sound file is ...

  • Pentax Z10 - page 142

    140 6 Editing and Printi ng Images This mode lets you change the color tones an d perform special processing on a sel ected image. Digital Filters 1 Enter the Q mode and use the four- way controller ( 45 ) to choose the image you want to edit. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( ...

  • Pentax Z10 - page 143

    141 6 Editing and Printi ng Images 5 Use the four-way controller ( 23 ) to choose a digital filter. You can preview the results of the fi lter effect. 6 Press the 4 button. A confirmation di alog for overwri ting the image appears. 7 Use the four-way controller ( 23 ) to select [Overwrite] or [Save as]. [Save as] is t he only available option for p ...

  • Pentax Z10 - page 144

    142 6 Editing and Printi ng Images 5 Use the four-way controller ( 23 ) to select the digital filter you want to use. Use the four-way controller ( 45 ) to adju st the effect. The fisheye f ilter effect increa ses each time you press the four-way controller ( 5 ) and decreases ea ch time you press the four-way controller ( 4 ). For the brigh tness ...

  • Pentax Z10 - page 145

    143 6 Editing and Printi ng Images You can correct images where the flash has caused the subject to appear with red ey es. 1 Enter the Q mode and use the four- way controller ( 45 ) to choose the image you want to corr ect. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way c ontroller ( 2345 ) to select Z ...

  • Pentax Z10 - page 146

    144 6 Editing and Printi ng Images This function lets you add a decorative frame to still pictures. There a re three frames already stored in the camera. 1 Enter the Q mode and use the four-way co ntroller ( 45 ) to choose the image to whic h you want to add a frame. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use t ...

  • Pentax Z10 - page 147

    145 6 Editing and Printi ng Images 7 Press the 4 button. The frame pos ition and siz e adjustment screen appears. Use the four-way contro ller ( 2345 ) to adjust the position of the image, and use the Zoom/ f / y button to make the image larger or smaller. 8 Press the 4 button. A confirmation di alog for overwri ting the image appears. 9 Use the fo ...

  • Pentax Z10 - page 148

    146 6 Editing and Printi ng Images You can select a frame from a recorded movie to save as a still picture, divide a movie into two or stitch two movies together. 1 Enter the Q mode and use the four- way controller ( 45 ) to ch oose the mo vie you w ant to ed it. To stitch two movie s together (p. 149), choose the first movie (first half). 2 Press ...

  • Pentax Z10 - page 149

    147 6 Editing and Printi ng Images 5 Select [Sav e as Still im age] on the movie edit selection screen. 6 Press the 4 button. The screen appears for sel ecting a frame to be saved as a still picture. 7 Use the four-way controller ( 2345 ) to choose the frame you want to save. 2 : Plays or pauses the movie 3 : Stops the movie and r eturns to the fir ...

  • Pentax Z10 - page 150

    148 6 Editing and Printi ng Images 5 Select [Divide Movies] on the movie edit selection screen. 6 Press the 4 button. The screen for choosing the div iding position appears. 7 Use the four-way controller ( 2345 ) to determin e the dividing position. 2 : Plays or pauses the movie 3 : Stops the movie and r eturns to the first frame 4 : Reverses the m ...

  • Pentax Z10 - page 151

    149 6 Editing and Printi ng Images 5 Select [Stitch Movies] on th e movie edit selection screen. 6 Press the 4 button. The movie selec tion screen appears. 7 Use the four-way controller ( 45 ) to choose the second movie (latt er half). 8 Press the 4 button. A confirmation dial og appears. 9 Use the four-way controller ( 23 ) to select [St itch]. 10 ...

  • Pentax Z10 - page 152

    150 6 Editing and Printi ng Images Setting the Printing Service (DPOF) DPOF (Digital Print Order For mat) is the format f or storing print order data on still pictures captured w ith a digital camera. Once the print order data has been stored, the pictures ca n be printed according to the DPOF settings using a DPOF-compatible printer or photo proce ...

  • Pentax Z10 - page 153

    151 6 Editing and Printi ng Images 5 Press the 4 button. The message [D POF setting f or this image] appears. To make DPOF sett ings for another image , use the four-way contro ller ( 45 ) to select another image. If DPOF settings have al ready been made for an image, the previou s number of copies and date setting ( O or P ) will be displayed. 6 U ...

  • Pentax Z10 - page 154

    152 6 Editing and Printi ng Images When you choose the number of copies and whether or not to insert the date, the settings are applied to all the images stored in the camera. 1 Display the screen for DPOF sett ings in Q mode. Refer to Steps 1 to 3 on p.150. 2 Use the four-way controller ( 23 ) to select [All Ima ges]. 3 Press the 4 button. The mes ...

  • Pentax Z10 - page 155

    153 6 Editing and Printi ng Images Printing Using PictBridge By connecting the camera to a pri nter that supports PictBridge using the USB cable (I-USB7) provided, you ca n print images di rectly from the camera without using a PC. Conne ct the camera to the printe r and select the images you want to print and th e numbe r of copies on the camera. ...

  • Pentax Z10 - page 156

    154 6 Editing and Printi ng Images 1 In the printing mode selection screen, use the fou r-way controller ( 23 ) to select [Single Image]. 2 Press the 4 button. The setting screen appears. 3 Use the four-way controller ( 45 ) to choose an image to print. 4 Use the four-way controller ( 23 ) to choose the number of cop ies. You can print up to 99 cop ...

  • Pentax Z10 - page 157

    155 6 Editing and Printi ng Images 9 Use the four-way controller ( 2345 ) to choose the paper size. You can only choose a size that is supported by your printer. 10 Press the 4 button. The Paper Size se tting is saved, and the screen returns to the print settings screen. 11 Use the four-way controller ( 23 ) to select [Pa per Type] and press the fo ...

  • Pentax Z10 - page 158

    156 6 Editing and Printi ng Images 1 In the printing mode selection screen, use the fou r-way controller ( 23 ) to select [All Images]. 2 Press the 4 button. The setting screen appears. 3 Choose the number of copies and whether to i nsert the date or n ot. The number of copies an d date setting that you choose apply to all the images. Refer to Step ...

  • Pentax Z10 - page 159

    157 6 Editing and Printi ng Images 1 In the printing mode se lection screen, us e the four-way controller ( 23 ) to select [DPOF AUTOPRINT]. 2 Press the 4 button. The DPOF settings you have made appear. Use the four-way controller ( 45 ) to check the number of copies for each picture, whether to insert the date or not, and the total number of copi ...

  • Pentax Z10 - page 160

    158 7 Recording an d Playing Back Sound Recording and Playing Back Sound Recording Sound (Voi ce Recording Mode) You can record sound with the camera. The micropho ne is located on the front of the camera. When recordi ng soun d, aim the camera to obtain the best conditions. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ett ...

  • Pentax Z10 - page 161

    159 7 Recording an d Playing Back Sound 3 Press the 4 button. The remaining recordabl e time and the recording time of the current f i le appear on the LCD monitor. 1 Recording time 2 Remaining recordable time 4 Press the shutter relea se button fully. Recording starts. The self-ti mer lamp blinks during recording. You can record sounds co ntinuous ...

  • Pentax Z10 - page 162

    160 7 Recording an d Playing Back Sound Playing Back Sound You can play back the sound files you ma de in O mode. 1 Press the Q button. 2 Use the four-way controller ( 45 ) to choose a sound file to play back. 3 Press the four-way contr oller ( 2 ). The sound file is played back. 1 Total file recording time 2 Playback time The followin g operation ...

  • Pentax Z10 - page 163

    161 7 Recording an d Playing Back Sound Adding a Voice Memo to Images You can add a voice memo to your still pictures. 1 Enter Q mode and use the f our-way controller ( 45 ) to choose the still pict ure to which you wa nt to add a voic e memo. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( ...

  • Pentax Z10 - page 164

    162 7 Recording an d Playing Back Sound 1 Enter Q mode and use the four- way controller ( 45 ) to choose the still picture with the voic e memo that you want to play bac k . U appears on images with voice memos in single-image displa y. 2 Press the four-way contr oller ( 2 ). Playback starts. The followin g operations can be performed during playba ...

  • Pentax Z10 - page 165

    163 8 Settings Settings Camera Settings Formatting will delete all the data o n the SD Memory Card. All the data in the b uilt-in memory will be deleted if no SD Memory Card is inserted in th e camera. 1 Use the four-way controller ( 23 ) to select [Format] on the [ W Setting] menu. 2 Press the four-way contr oller ( 5 ). The Format screen app ears ...

  • Pentax Z10 - page 166

    164 8 Settings You can change the initial date a nd time settings . You can also set the style in which the date appears on the camera. 1 Use the four-way controller ( 23 ) to select [D ate Adjust] on the [ W Setting] menu. 2 Press the four-way contr oller ( 5 ). The Date Adjust screen appears. 3 Press the four-way contr oller ( 5 ). The frame move ...

  • Pentax Z10 - page 167

    165 8 Settings 7 Press the four-way contr oller ( 5 ). The frame returns to [Date Style]. 8 Press the four-way contr oller ( 3 ). The frame move s to [Date]. 9 Press the four-way contr oller ( 5 ). The frame move s to one of the following items depending on the dat e style set in Step 4. For [mm/dd/yy] mont h (Example: [01]) For [dd/mm/yy] day (Exa ...

  • Pentax Z10 - page 168

    166 8 Settings You can adjust the volume of operat ion sounds and change the type of sound. 1 Use the four-way controller ( 23 ) to sele ct [Sound] on the [ W Setting] menu . 2 Press the four-way contr oller ( 5 ). The Sound screen app ears. 3 Use the four-way controller ( 23 ) to select [Operatio n Volume]. 4 Use the fou r-way contro ller ( 45 ) t ...

  • Pentax Z10 - page 169

    167 8 Settings 6 Use the four-way controller ( 23 ) to select [Start-up Sound]. 7 Press the four-way contr oller ( 5 ). A pull-down menu appears. 8 Use the four-way controller ( 23 ) t o select [ 1], [2], [3 ], [Off] or [USER] and press the 4 button. The selecte d sound type i s saved. 9 Set [Shutter Sound] , [Operation Sound] and [Self-time r Soun ...

  • Pentax Z10 - page 170

    168 8 Settings You can set the alarm to ring at a sp ecified time. You can choose whether the alarm will ring at the same time every day or only once at the set time. 1 Use the four-way controller ( 23 ) to select [Alarm] on the [ W Setting] menu 2 Press the four-way contr oller ( 5 ). The Alarm screen appears. 3 Press the four-way contr oller ( 5 ...

  • Pentax Z10 - page 171

    169 8 Settings 8 Press the 4 button twice. The screen returns to the [ W Setting] menu. Check that [Alarm] is set to O (On). 9 Press the 4 button. [Alarm is set] appears and the ca mera turns off. 1 Use the four-way controller ( 23 ) to select [Alarm] on the [ W Setting] menu . Check that [Alarm] is set to O (On). 2 Press the four-way contr oller ( ...

  • Pentax Z10 - page 172

    170 8 Settings The date and time selected in “Setting the Date and Time” (p.3 6) and “Changing the Date and Time” (p.164) serve as the W (Hometown) da te and time. By usin g the world time function, yo u can display the time in a city other than the Hometown ( X De stination). This is useful when taking pictures in a di fferent time zone. 1 ...

  • Pentax Z10 - page 173

    171 8 Settings 8 Press the 4 button. The World Time setting is saved. 9 Press the 3 button twice. The camera returns to ca pture status with the curr ent setting. 1 Use the four-way controller ( 23 ) to select [Wo rld Time] on the [ W Setting] menu . 2 Press the four-way contr oller ( 5 ). The World Time screen appears. 3 Use the four-way controlle ...

  • Pentax Z10 - page 174

    172 8 Settings You can change the lan guage in which the menus, error messages, e tc. are display ed. The camera supports the following 17 languag es: English, French, German, Spanish, Portugues e, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech, Hungari an, Turkish, Russian, Thai and Japanese. 1 Use the four-way controller ( 23 ) to select ...

  • Pentax Z10 - page 175

    173 8 Settings You can change the image folder name to Standard or Date that p ictures were taken. When the name is changed to the date, pictu res are saved in separate folders by t he date they were taken. Folder Name 1 Use the four-way controller ( 23 ) to select [F older Name] on the [ W Setting] menu. 2 Press the four-way contr oller ( 5 ). A p ...

  • Pentax Z10 - page 176

    174 8 Settings Choose the appropriate USB connec tion mode de pending on whethe r you are going to con nect the USB cable to a PC or a PictBridge- compatible printer. 1 Use the four-way controller ( 23 ) to select [USB Connection] on the [ W Setting ] menu. 2 Press the four-way contr oller ( 5 ). A pull-down menu appears. 3 Use the four-way control ...

  • Pentax Z10 - page 177

    175 8 Settings When you connect the camera to AV equipment, choo se the appropriate video output format (NTSC or PAL) for taking and playing back images. 1 Use the four-way controller ( 23 ) to select [Video Out] on the [ W Setting] menu . 2 Press the four-way contr oller ( 5 ). A pull-down menu appears. 3 Use the four-way controller ( 23 ) to sele ...

  • Pentax Z10 - page 178

    176 8 Settings You can adjust the brightness of the LCD moni tor. 1 Use the four-way controller ( 23 ) to select [Brightness Level] on the [ W Setting] menu. 2 Use the four-way controller ( 45 ) to adjust the brightness. The followi ng setting is saved. F (Dark) G (Normal) H (Bright) 3 Press the 3 button. The camera returns to Capture mode or Pl ay ...

  • Pentax Z10 - page 179

    177 8 Settings You can save batter y power by setting th e LCD monitor to dim automatically whe n no operation is pe rformed for a fix ed ti me. After the power saving function has been activa ted, the LCD monitor re turns to the ordinary brightness by pr essing any of the butto ns. 1 Use the four-way controller ( 23 ) to select [Power Saving] on t ...

  • Pentax Z10 - page 180

    178 8 Settings You can set the camera to turn off automatically when no operation is performed for a fixed time. 1 Use the four-way c ontroller ( 23 ) to sele ct [Auto Powe r Off] on the [ W Setting] menu. 2 Press the four-way contr oller ( 5 ). A pull-down menu appears. 3 Use the four-way controller ( 23 ) to select [5min ], [3min] or [Off]. 4 Pre ...

  • Pentax Z10 - page 181

    179 8 Settings You can choose whether or not to display a guide for the mode you choose in the Capture Mo de Palette (p.53) and Playback Mod e Palette (p.60). 1 Use the four-way controller ( 23 ) to sele ct [Guid e Display] on the [ W Setting] menu. 2 Use the four-way controller ( 45 ) to select O (On) or P (Off). O (ON): The mode guide is displaye ...

  • Pentax Z10 - page 182

    180 8 Settings You can reset the camera settings to their defaults. Refer to “Default Settings” (p.184) for the reset settings. 1 Use the four-way controller ( 23 ) to select [Reset] on th e [ W Setting] menu. 2 Press the four-way contr oller ( 5 ). The Reset screen a ppears. 3 Use the four-way controller ( 23 ) to select [Res et]. 4 Press the ...

  • Pentax Z10 - page 183

    181 8 Settings You can choose an image to be displayed as the start-up screen when the camera is turned on. 1 Press the Q button. The camera enters Q mode. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 23 45 ) to select ^ (Start-up Scree n). 4 Press the 4 button. The image selec tion scre ...

  • Pentax Z10 - page 184

    182 8 Settings Displaying the Clock Mode You can use th e camera as a clo ck. With the camera turned off, press and hold down the 4 button to display the clock on the LCD monito r. 1 Press and hold down the 4 button. The camera turns on and the clock appears on the screen. The camera turns off aut omatically after approximately 10 seconds. 4 button ...

  • Pentax Z10 - page 185

    183 9 Appendix Appendix List of World Time Cities The column “City” indicates cities that can be set as either the In itial Setting (p.34) or the World Time (p.170). The column “Video Outpu t Format” indicates the video out put format of the city set as the Initial Setting. Region City Video Output Format Region City Video Output Format Nor ...

  • Pentax Z10 - page 186

    184 9 Appendix Default Settings The table below lists the factory default settings. The meaning of the indica tions for menu items with a default setting is explained below. Last Memory Setting Yes : The current setting (last memory) is sa ved when the camera is turned off. No : The setting returns to the default settin g when the camera is turned ...

  • Pentax Z10 - page 187

    185 9 Appendix Memory Flash Mode O (On) Yes Yes p.87 Drive Mode P (Off) Yes Yes p.74, p.75 Focus Mode P (Off) Yes Yes p.85 Zoom Position P (Off) Yes Yes p.76 MF Position P (Off) Yes Yes p.86 White Balance P (Off) Yes Yes p.92 Sensitivity P (Off) Yes Yes p.96 EV Compensation P (Off) Yes Yes p.82 AE Metering P (Off) Yes Yes p.94 Digital Zoom O (On) Y ...

  • Pentax Z10 - page 188

    186 9 Appendix [ W Setting] Menu Items Playback Mode Palette Items Item Default Set ting Last Memory Setting Reset Setting Page Sound Operation Volume 3 Yes Yes p.166 Playback Volume 3 Yes Yes Start-up Sound 1 Yes Yes Shutter Sound 1 Yes Yes Operation Sound 1 Yes Yes Self-timer Sound 1 Yes Yes Date Adj ust Date Style (date) According to initial set ...

  • Pentax Z10 - page 189

    187 9 Appendix Key Operation Cropping Depending on the picture taken — — p.137 Image/Sound Copy — — — p.138 Image Rotation Normal — — p.42 Digital Filter B&W No — p.140 Movie Edit Save as Still image —— — p.144 Divide Movies —— — Stitch Movies —— — Frame Composite Default1 Yes Yes p.146 Red-eye Compensation — ...

  • Pentax Z10 - page 190

    188 9 Appendix Functions Available fo r Each Shooting Mode Yes : Can be set and function is available. No : Cannot be set. # : Can be set but function is not available. *1 If you select on e of these functions in another shooting mode and then ent er the Green mode, only the function selected is available. *2 Fixe d at L (Multi- segment) *3 Fixe d ...

  • Pentax Z10 - page 191

    189 9 Appendix Note: Menu settings cannot be ch anged when in Digital wide mode. *8 Fixe d at h (2048 ×1536) *9 Fixe d at D *10 W (Automatic Tracking AF) is not availa ble *11 Fi xed to J (Mul tiple) *12 Fix ed at AU TO (64 - 3200) *13 Fix ed at F (Auto White Balance) *14 Stitched photos are fixed f (however, the first photo uses h ) *15 Stitched ...

  • Pentax Z10 - page 192

    190 9 Appendix Optional Accessories A number of dedicated accessories are availa ble for this came ra. Products marked with an asterisk (* ) are the same as those supp lied with the camera. Power supply Rechargeable lithium-ion battery D-LI72 (*) Battery charger kit K-BC72 (*) (Battery charger D-BC72, AC plug cord) AC adapter kit K-A C63 (AC adapte ...

  • Pentax Z10 - page 193

    191 9 Appendix Messages Messages such as the foll owing may appear on the LCD monito r during camera operation. Message Descri ption Battery depl eted The batte ry is exhauste d. Charge the b attery usin g the battery ch arger. (p.22) Memory card full The SD Memory Card i s full and no more i mages can be saved. Insert a new SD Memory Car d or dele ...

  • Pentax Z10 - page 194

    192 9 Appendix Messages such as the follow ing may appear on the LCD monitor when using the PictBridge function. Data being rec orded This message ap pears when yo u try to switch t o Q mode while an image is st ill being recorded, or when the pro tect setting or DPOF sett ing is b eing chang ed. It di sappears after the i mage is reco rded or the ...

  • Pentax Z10 - page 195

    193 9 Appendix Print Cance led Displayed when p rinting is cancele d. No image to be proc essed D isplayed wh en there are no images to print . Wrong DPOF sett ing Displayed wh en DPOF printing ca nnot be perfo rmed. ...

  • Pentax Z10 - page 196

    194 9 Appendix Troubleshooting Problem Cause Remedy The camera will not turn on The batter y is not installed Check if a bat tery is ins talled. If not, install a ba ttery. The batter y is installe d incorrectly Check orie ntation of the batter y. Reinsert battery acco rding to +- symbols. (p.23) The battery power is low Charge the battery. No imag ...

  • Pentax Z10 - page 197

    195 9 Appendix Static elect ricity may occasional ly prevent the c amera from ope rating corr ectly. If thi s should occu r, try removi ng and then re loading the bat tery. If t he camera turns on and operates pr operly, thi s indicates that there is no mal function. You can use the camer a as usual. The subj ect is not in focus The subje ct is dif ...

  • Pentax Z10 - page 198

    196 9 Appendix Main Specifications Approximat e Image Storage Capacity and Re cording Time Still Pictures • The imag e storage cap acity is for reference on ly. The actua l image storag e capacit y may vary depen ding on the SD memor y card and th e subject. Type Fully automa tic compact di gital still ca mera with buil t-in zoom lens Effectiv e ...

  • Pentax Z10 - page 199

    197 9 Appendix Movie/Sound The recording time is for reference only. T he actual recor ding time may vary dependin g on the SD memory ca rd and the su bject. 30fps 15fps Sound Built-in Memory 256 MB Built-in Memory 256 MB Built-in Memory 256 MB m 640×480 C 49 min. 3 min. 47 sec. 1 min. 38 sec. 7 min. 28 sec. 41 min. 17 sec. 3 hr. 8 min. 53 sec. D ...

  • Pentax Z10 - page 200

    198 9 Appendix Playback Functions Single-frame, 9-frame index, enlargemen t (max. 8×, scrol lable), folder display, calendar displ ay, Image Rotation, sou nd playback, slideshow, movie playback and editing (saving as stil l image, dividing, stitching), histogram display, brigh t /dark portion display, imag e/sound copying, digital filter, crop pin ...

  • Pentax Z10 - page 201

    199 9 Appendix Time Function World Time 75 cities (28 time zones) Clock Mode Clock display by holding down 4 / W button while camera is turned off (approx. 10 sec.) Alarm Alarm with simultaneou s display of the Clock mode at sp ecified t ime Power Supply Rechargeable lithium-ion b attery D-LI72, AC adapter kit (optional ) Battery Life Number of Rec ...

  • Pentax Z10 - page 202

    200 9 Appendix WARRANTY POLICY All PENTAX cameras purchased through authorized bona f ide photographic distribution channels are guaranteed against de fects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, a nd defective parts will be replac ed without cost to you w ithin that period, provide ...

  • Pentax Z10 - page 203

    201 9 Appendix • T his warranty policy does not affect the customer’s statutory righ ts. • The lo cal warranty policies available from PENT AX distributors in some countries can supersede this warranty poli cy. Therefore, we recommend that you review the warrant y card supplied with yo ur product at the time of purchase, or cont act the PENTA ...

  • Pentax Z10 - page 204

    202 9 Appendix For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is sub ject to the following two conditi ons: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes ...

  • Pentax Z10 - page 205

    203 9 Appendix Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Comp uters and Peripherals We: PENTAX Imaging Company A Division of PENTAX of Americ a, Inc. Located at: 600 12 Street, Suite 300 Golden, Colorado 80401 U.S.A. Phone: 303-799- 8000 FAX: 303-79 0-1131 Declare under sole responsibi lity that the product i ...

  • Pentax Z10 - page 206

    204 9 Appendix Informatio n on disposal for users 1. In the European Union If your product is marked with this symbol, it means that used electrical/electronic pr oducts should not be mixed with general household waste. Ther e exists a separate collection system for these products. Used electric/electronic equ ipment must be treated separately and ...

  • Pentax Z10 - page 207

    205 9 Appendix Index Symbols [ A Rec.Mode] menu ......... 51 A mode ......................... ... 10 Q button .................... 44, 46 Q mode ........................ ... 10 [ W Setting] menu ............ ... 52 9 Green Mode . ................ 64 X Green Button .......... 44, 47 i Delete .. ................. 42, 127 x Tele ............... ...... ...

  • Pentax Z10 - page 208

    206 9 Appendix Contrast .......... ................ . 103 Copy ............... ................ . 138 Cropping ................ .......... 137 D Dark portions ..................... 19 Date and time ........ .... 36, 164 Daylight G ................ ......... 92 Daylight saving time .......... 36 Default setting ... ........ 34, 184 Delete i ........ ...

  • Pentax Z10 - page 209

    207 9 Appendix P PAL ................ ................ . 175 Pan Focus 3 ................... 85 Photo processing lab ....... 150 PictBridge .......... .............. 153 Playback ... 41, 116, 1 25, 160, 162 Playback Mode .................. 33 Playback Mode Palette ...... 60 Playing back movies ........ 125 Playing back sounds ....... 160 Power Savi ...

  • Pentax Z10 - page 210

    Memo ...

  • Pentax Z10 - page 211

    Memo Thank you for purchasing this PENTAX Digital Camera. Please read this manual before usin g the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to unde rstand all the came ra’s capabilities. Regarding copyrights Images taken using the PENTAX Digital Came ...

  • Pentax Z10 - page 212

    Digital Camera Operating Manual To ensure the best performance fro m your camera, please read the Operating Manual befo re using the camer a. • Specificati ons and external di mensions are subject to change without notice. 57932 Copyright © PENTAX Co rporation 2 007 01-200707 Printed in Indone sia PENTAX Corporation 2-36-9, Maeno-cho, Itabashi-k ...

Fabricante Pentax Categoría Digital Camera

Los documentos del dispositivo Pentax Z10 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Pentax
- manuales de instrucciones Z10
- hojas de producto Pentax
- folletos informativos
- o etiquetas energéticas Pentax Z10
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Pentax Z10.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Pentax Z10, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Pentax Z10. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Pentax Z10.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Pentax Z10, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Pentax Z10. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Pentax Z10.

El manual de instrucciones completo de Pentax debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Pentax Z10 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Pentax Z10, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Pentax Z10 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Pentax Z10 - que deben facilitarnos los primeros pasos durante el uso de Pentax Z10
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Pentax Z10
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Pentax Z10 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Pentax Z10?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Pentax Z10, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Pentax Z10 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)