-
TC electronic SDN BHD x32 - page 1
User’ s Manual English V ersion Digital K onnekt x32 ...
-
TC electronic SDN BHD x32 - page 2
...
-
TC electronic SDN BHD x32 - page 3
1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water . 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers ...
-
TC electronic SDN BHD x32 - page 4
EMC/EMI This equipment has been tested and found to comply with the limits for a Class B Digit al device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses and can radiate radio frequency energy and, if not instal ...
-
TC electronic SDN BHD x32 - page 5
TC Electronic, Sindalsvej 34, DK-8240 Risskov – tcdk@tcelectronic.com Manual revision 1.01 – SW – V 2 English Version INTRODUCTION Important Safety Instructions . . . . . . . . . . . . . .a Certificate of Conformity . . . . . . . . . . . . . . . . . .b T able Of Contents . . . . . . . . . . . . . . . . . . . . . . .3 Introduction . . . . . . ...
-
TC electronic SDN BHD x32 - page 6
...
-
TC electronic SDN BHD x32 - page 7
INTR ODUCTION Digit al Konnekt x32 – Patchbay , Format Converter , Audio Interface and hardware integrator Digital Konnekt x32 not only put s patching and signal-splitting under preset control, and convert s between formats. What comes out is also better than what went in. Thanks to System 6000 grade clock clean-up and jitter rejection, Digital K ...
-
TC electronic SDN BHD x32 - page 8
Selecting channels For each input channel pair one input type can be selected. Example 1 In the example below the following is selected: Input channel pair 1/2: T os Input channel pair 3/4: SPDIF Input channel pair 5/6: AES/EBU Input channel pair 7/8: AES/EBU aes/spdif/tos in SRC SPDIF TOS FRONT aes/spdif clock master L 1 3 5 7 FORMAT CONVERTER | P ...
-
TC electronic SDN BHD x32 - page 9
SRC Digital Konnekt x32 has 4 sample rate converters and thus features individual sample rate conversion on any input channel pair in this section OR on all ADA T channels. When activating sample rate conversion SRC in the ADA T section, any selected sample rate conversion in the AES/SPDIF/TOS section is deselected. AES+SPDIF+T OS Routing This is t ...
-
TC electronic SDN BHD x32 - page 10
OPERA TION 8 AD A T Routing The four ADA T channel pairs can be routed to any pair of AES+SPDIF+TOS channels and to the eight ADA T channels simultaneously as well. Example 2 In the example below the following is selected: Normal sample rate ADA T ch. 1-2 is sent to AES+SPDIF+TOS ch. 1-2 ADA T ch. 3-4 is sent to AES+SPDIF+TOS ch. 3-4 ADA T ch. 5-6 ...
-
TC electronic SDN BHD x32 - page 11
OPERA TION 9 Example 3 A typical setting for this section would be: • Routing firewire channels 1-8 to AES+SPDIF+TOS 1-8 • Routing firewire channels 9-16 to ADA T . This is set up in the following way: • Press 1-8 to route firewire channels 1-8 We have routed channels 1/2 to monitor out. • Press 9-16 to route firewire channels 9-16 3-4 1-2 ...
-
TC electronic SDN BHD x32 - page 12
OPERA TION 10 Internal Clock Y ou may also choose to lock to an internal clock rate. The following rates can be selected by pressing the INT button. 44.1 48 88.2 96 176.4 192 kHz kHz kHz kHz kHz kHz 44.1k clock rate t n e INT 48k x2 x4 SEL 44.1k clock rate ut n e INT 48k x2 x4 SEL 44.1k clock rate t n e INT 48k x2 x4 SEL 44.1k clock rate ut n e INT ...
-
TC electronic SDN BHD x32 - page 13
OPERA TION 11 Input Signal Monitor LEDs The blue LOCK SIG LEDs normally indicate the current lock state for each of the input sections. However , these LEDs can also be used as input meters for these sections. Press to activate. Security Lock T o avoid unintended operation of the front panel controls, these can be locked. - Press once to lock - Pre ...
-
TC electronic SDN BHD x32 - page 14
OPERA TION 12 FORMAT CONVERTER | PA TCHBAY | FIREWIRE IO digital konnekt x32 3-4 3-4 3-4 1-2 1-2 1-2 5-6 5-6 5-6 7-8 7-8 7-8 adat adat adat mon mon mon setup /util scenes aes/spdif/tos in adat in firewire in master clock aes+spdif+tos aes+spdif+tos aes+spdif+tos SRC SPDIF TOS NS 1-8 44.1k clock rate aes /spdif monitor LEDs dual wire XLR hold to sel ...
-
TC electronic SDN BHD x32 - page 15
13 1 - Analog Out Balanced analog outputs on 1/4” TRS jacks. The level of the outputs is controlled by the monitor level control knob on the front panel. 2 - AES/EBU inputs Female XLR connectors for up to 8 AES channels. 3 - AES/EBU outputs Male XLR connectors for up to 8 AES channels. 4 - SPDIF I/O Upper row: - RCA connectors for 8 input channel ...
-
TC electronic SDN BHD x32 - page 16
14 INTEGRA T OR The Integrator plug-in for DigitalKonnekt32 makes integration of external hardware into your DA W environment seamless. It offers a “plug-in” audio routing represent ation of your external digital ef fects processors and operates as a normal VST/AU plug-in. The Integrator plug-in can be inserted on any track, utilizing external ...
-
TC electronic SDN BHD x32 - page 17
15 The Integrator plug-in is automatically installed when the TC Near control panel is inst alled. P arameters Lock Green - indicates correct lock between the selected external digital device and Digit al Konnekt x32. Red - indicates “no lock”. Check connections and settings. Device Selects the connected digit al devices you are setting up. 1st ...
-
TC electronic SDN BHD x32 - page 18
SETUP EXAMPLES 16 Example 1: Integrating external har dwar e with y our D A W REVERB 4000 FIREWORX FINALIZER 96K NON TC PRODUCT C400XL COMPUTER ACTIVE SPEAKERS FORMAT CONVERTER | PATCHBAY | FIREWIRE IO digital konnektx32 3-4 3-4 3-4 1-2 1-2 1-2 5-6 5-6 5-6 7-8 7-8 7-8 adat adat adat mon mon mon setup /util scenes aes/spdif/tos in adat in firewire i ...
-
TC electronic SDN BHD x32 - page 19
SETUP EXAMPLES 17 Setting up Digit al Konnekt x32 AES/SPDIF/TOS in • SPDIF is selected for channel pairs 1/2 and 3/4. • AES is selected for channel pairs 5/6 and 7/8 (no LEDs are lit). ADA T in • We select Normal Sample rate and route ADA T channels to ADA T out. Firewire • In the Firewire section we choose to monitor channels 9/10. Therefo ...
-
TC electronic SDN BHD x32 - page 20
The Integrator Now that Digital Konnekt x32 is set up it is time to set up your DA W application utilizing the Integrator plug-in. For each external effect, one inst ance of the Integrator plug-in must be set up. Each of the Integrator instances then represents one external ef fect. This example illustrates how Integrator is inserted in Cubase LE w ...
-
TC electronic SDN BHD x32 - page 21
Integrator always acts as a stereo plug-in, - also when inserted on a mono-track. C400XL • Insert the Integrator on a stereo track on a stereo bus. • Select firewire channel 7/8 by selecting “fw ch 7” Finalizer 96K • The Finalizer will typically be used for mastering. Insert Integrator on you master stereo bus. • Select firewire channel ...
-
TC electronic SDN BHD x32 - page 22
SETUP EXAMPLES 20 Example 2: Con ventional audio interface PREAMP #2 PREAMP #1 CD/DVD PLA YER COMPUTER AIR SPEAKERS FORMAT CONVERTER | PATCHBAY | FIREWIRE IO digital konnekt x32 3-4 3-4 3-4 1-2 1-2 1-2 5-6 5-6 5-6 7-8 7-8 7-8 adat adat adat mon mon mon setup /util scenes aes/spdif/tos in adat in firewire in master clock aes+spdif+tos aes+spdif+tos ...
-
TC electronic SDN BHD x32 - page 23
Setting up Digit al Konnekt x32 AES/SPDIF/TOS in • SPDIF is selected for channel pair 1/2. (keyboard) • TOS is selected for channel pair 3/4 (CD player) • SPDIF is selected for channel pairs 5/6 and 7/8 (preamp #1 and preamp #2) • As none of the attached devices can sync to an external clock we activate SRC (Sample Rate Conversion) for all ...
-
TC electronic SDN BHD x32 - page 24
In this example Digital Konnekt x32 is used in a live situation as a digital splitter box that routes the signal to both a laptop computer for recording/play-back, to the P A system via a master EQ and to a broadcast station. Connections • The main output channels of the digital mixing console is fed via AES to the AES 1/2 inputs on Digital Konne ...
-
TC electronic SDN BHD x32 - page 25
23 SETUP EXAMPLES Setting up Digit al Konnekt x32 AES/SPDIF/TOS in • AES 1/2 is selected in the AES/SPDIF/TOS section as none of the LEDs are lit. The blue 1/2 LED indicates that a signal is present on AES 1/2 • Sample Rate conversion is activated on channels pair 1/2 • AES channels 1/2 is routed to the master EQ via AES 3/4 out and also via ...
-
TC electronic SDN BHD x32 - page 26
24 This example illustrates Digital Konnekt x32 used in conjunction with a ProT ools setup integrating external digital devices. The screenshot in this example is based on ProT ools HD but applies to any version of Pro T ools hardware that has digital in (AES/EBU, SPDIF , ADA T , TOS or W ord Clock). Connections: • A DVD player is connected to T ...
-
TC electronic SDN BHD x32 - page 27
SETUP EXAMPLES 25 Setting up Digit al Konnekt x32 AES/SPDIF/TOS in • SPDIF is selected for channel pair 5/6 (Reverb 4000) - select T OS 5/6 to route the DVD player instead SRC is activated for channel pair 5/6 only when the DVD is used • SPDIF is selected for channel pair 3/4 (Finalizer 96K • AES is selected for channel pair 7/8 (no LEDs are ...
-
TC electronic SDN BHD x32 - page 28
Buffer Siz e Buffer Size* The buffer size can be set from 32 to 8192 samples. The higher the buffer setting, the longer latency through Digital Konnekt x32. Y ou should only increase the buffer size if you experience problems such a clicks and pops in the sound. Note that clicks and pops in the sound may also derive from clock problems. These shoul ...
-
TC electronic SDN BHD x32 - page 29
Status V arious lock status indications can be given: Internal Lock Indicates that the system is locked to the Digital Konnekt x32 unit set as clock master . External Lock Indicates that the system is locked to an external digital device connected to the Digital Konnekt x32 set as clock master . No Reference External sync on the Digital Konnekt x32 ...
-
TC electronic SDN BHD x32 - page 30
Digital Input s and Outputs Connector (AES): Formats (AES): Connector (S/PDIF): Formats (S/PDIF and T osLink): Connector (ADA T® or T osLink): Format (ADA T®): Word Clock: Firewire (format): Firewire (channels): Digital IO Engine: Clock and Jitter Internal Sample Rates: Internal Clock Precision: External Sample Rates: Jitter Rejection Engine: Jit ...
¿Tienes una pregunta acerca de TC electronic SDN BHD x32?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con TC electronic SDN BHD x32, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con TC electronic SDN BHD x32 probablemente compartirá una forma de solucionarlo.