-
Heatiator CB4842IR - page 1
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 1 Model(s): CB4236IR CB4842IR B-V ent Gas Appliance Owner ’ s Manual Installation and Operation DO NOT DISCARD THIS MANUAL NOTICE • Leave this manual with party responsible for use and operation. Insta llatio n and s ervice of th is appl iance should be performed by qualied pe ...
-
Heatiator CB4842IR - page 2
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 2 Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on replace: _____________________ Dealership purchased from: _______________ ...
-
Heatiator CB4842IR - page 3
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 3 Safety Alert Key: • Indicates a hazardous situation which, if not avoided will result in death or serious injury . • Indicates a hazardous situation which, if not avoided could result in death or serious injury . • ? ...
-
Heatiator CB4842IR - page 4
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 4 = Contains updated information. 15 T roubleshooting A. Intellire Ignition System 3 2 16 Reference Materials A. Appliance Dimension Diagram 34 B. Service Parts List 3 5 C. Optional Components 3 8 D. Contact Information 4 0 ...
-
Heatiator CB4842IR - page 5
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 5 B. W arranty 4021-645B 04-02-09 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliance ...
-
Heatiator CB4842IR - page 6
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 6 B. W arranty (continued) 4021-645B 04-02-09 Page 2 of 2 W ARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor . A list of HHT authorized dealers is available on the HHT branded websites. • This warran ...
-
Heatiator CB4842IR - page 7
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 7 B. T empered Glass Specications Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous locations such as bathtub enclosures as dened by the Consumer Product Safety Commission (CPSC). The tempered glass has been tested and cer ...
-
Heatiator CB4842IR - page 8
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 8 Grate (not shown) Section 14.H. Mantel Section 5.D. Hearth (not required) Clear Space Section 2.D. W all Switch for Fan Section 12.F . Outside Air Kit (behind panel) Section 9.A. Fixed Glass Assembly Section14.J. Remote Control 2 Operating Instr uct ions Figure 2.1 Fireplace Compon ...
-
Heatiator CB4842IR - page 9
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 9 Clear Space 3 ft (0.91 m) in front of appliance D. Clear Space ? ...
-
Heatiator CB4842IR - page 10
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 10 J. Lighting Instructions (IPI) • For normal use, activate/deactivate your replace with the wall switch or remote control. • The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer . T o prolong battery life, remove them when us ...
-
Heatiator CB4842IR - page 11
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 1 1 Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the replace off and allow it to completely cool. • Remove xed glass assembly . See Section 14.J. • C le an xed g la ss as se mb ly . S ee Se ct ion 3 . • ...
-
Heatiator CB4842IR - page 12
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 12 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed: Protective gloves, gla ss cl eaner , drop c loth and a st able wor k sur face. ? ...
-
Heatiator CB4842IR - page 13
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 13 Burner Ignition and Operation Frequency: Annually By: Qualied Service T echnician T ools needed: Protec tive glov es, vacuum c leane r , whisk broo m, ashli ght, voltmeter , indexed dr ill bit set, and a manom - eter . • V erify burner is properly secured and aligned with ...
-
Heatiator CB4842IR - page 14
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 14 Noncombustible roof flashing maintains minimum clearance around pipe Ceiling Firestop on floor of attic Listed B-V ent Pipe Framing/Header (SECTION 5) Gas Line (SECTION 1 1) Framing Headed off in Ceiling Joists (SECTION 8) Mantel & Mantel Leg (SECTION 13) Surround Hearth Exten ...
-
Heatiator CB4842IR - page 15
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 15 B. Design and Installation Considerations Heatilator B-type vent gas appliances are designed to operate with all exhaust gases expelled to the outside of the building, and combustion air pulled from the room. Installation MUST comply with local, regional, state and national codes ...
-
Heatiator CB4842IR - page 16
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 16 Recommended Location Marginal Location Location Not Recommended Recommended Location Multi-level Roofs Windward Leeward Location Not Recommended Figure 4.2 E. Negative Pressure Negative pressur ...
-
Heatiator CB4842IR - page 17
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 17 A A A C E B B 1/2 in. (13 mm) C 48 in. (1219 mm) max. Drywall D A B C D E in. 42 50-5/8 23-1/2 44 71-5/8 mm 1,067 1286 597 1 118 18 19 in. 48 55-1/4 23-1/2 50 78-1/4 mm 1,219 1403 597 1 270 19 88 Model # CB4236IR CB4842IR 5 F raming and C learances A. Selecting Appliance Location ...
-
Heatiator CB4842IR - page 18
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 18 0 in. C B A Note: All pipe clearance specifications are per vent manufacturer's installation instructions. 0 (Clearance to Standoffs) 30 in. (762 mm) clearance to ceiling 1/2 in. (13 mm) 1/2 in. (13 mm) Drywall 0 in. Per V ent Manufacturer ’s Specifications Combustible floo ...
-
Heatiator CB4842IR - page 19
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 19 1 in. (25 mm) min. to perpendicular wall A 3-1/2 in. (89 mm) min. from fireplace opening to perpendicular wall B Mantel Leg or Perpendicular W all T op of Appliance Drywall A B Measured from top of hood (in inches) 3 4 5 6 7 8 9 10 1 1 12 13 14 15 16 17 18 5 5-1/2 6-1/4 7 7-3/4 8- ...
-
Heatiator CB4842IR - page 20
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 20 A. V ent T ermination Minimum Clearances Gas, Wood or Fuel Oil T ermination Cap B Gas T ermination Cap ** A * * If using decorative cap cover(s), this distance m ay need to be increased. Refer to the installation instructions supplied with the decorative cap cover. ** In a stagger ...
-
Heatiator CB4842IR - page 21
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 21 Minimum clearances are per vent manufacturer's specifications Metal plumber's strap secured to framing V ent supports are per vent manufacturer's specifications 12 ft (3.66 m) min. 60 ft (18.29 m) max. 45° Elbow 90° Elbow Offsets exceeding 45° adapt horizontal li ...
-
Heatiator CB4842IR - page 22
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 22 A. Pipe Clearances to Combustibles V ent clearances are per vent manufacturer ’s specica - tions. The vent MUST be Listed B-V ent pipe. space clearance to vent. ? ...
-
Heatiator CB4842IR - page 23
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 23 The diagram shows how to properly position, level, and secure the appliance (see Figure 9.2). Nailing tabs are provided to secure the appliance to the framing members. • Bend out nailing tabs on each side. • Place the appliance into position. • Keep nailing tabs ush with ...
-
Heatiator CB4842IR - page 24
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 24 T abs 1 0 Installing V ent P ip e A. Assembly of V ent Sections This B-V ent appliance requires 5 in. B-vent double-wall pipe. Follow the pipe manufacturer ’s installation guide- lines when installing the unit. This will ensure proper operation and prevent safety hazards. ? ...
-
Heatiator CB4842IR - page 25
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 25 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a qualified service technicia n using H earth & H ome T e chnologies specied and approved parts. C. Gas Connection • Refer to Reference Section 16.A. for ...
-
Heatiator CB4842IR - page 26
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 26 B. Intellire Ignition System Wiring • Wire the appliance junction box to 1 10 V AC for proper operation of the appliance. wire IPI ...
-
Heatiator CB4842IR - page 27
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 27 F . W all Switch Installation for Fan (Optional) If the box is being wired to a wall mounted switch for use with a fan, see Figure 12.3: • The power supply for t he appli ance mu st be b rought into a switch box. • The power can then be supplied from the switch box to the appl ...
-
Heatiator CB4842IR - page 28
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 28 Measured from top of hood (in inches) 3 4 5 6 7 8 9 10 1 1 12 13 14 15 16 17 18 5 5-1/2 6-1/4 7 7-3/4 8-1/2 9-1/4 10 10-3/4 1 1-1/2 12-1/4 13 13-3/4 14-1/2 15-1/4 16 30 in. minimum to ceiling 1 in. (25 mm) min. to perpendicular wall A 3-1/2 in. (89 mm) min. from fireplace opening ...
-
Heatiator CB4842IR - page 29
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 29 A. Remove Glass Assembly See Section J. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the rebox. C. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the rebox or underneath in the control cavity . D. Accesso ...
-
Heatiator CB4842IR - page 30
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 30 Latches (both bottom and top) Glass Assembly Figure 14.8 Fixed Glass Assembly H. Install the Log Assembly • Base logs ha ve b een p erman entl y mou nted on the gra te assembly and should not be moved. See Figure 14.5. Figure 14.7 Placing Right T op Log Figure 14.6 Placing Left ...
-
Heatiator CB4842IR - page 31
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 31 M. Air Shutter Setting Air shutter settings should be adjusted by a qualied installer at the time of installation. The air shutter is set at the factory for minimum vertical vent run. Adjust air shut- ter for longer vertical runs. • It takes 16 full turns of the shutter adjus ...
-
Heatiator CB4842IR - page 32
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 32 1 5 T roubleshoo ting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a qualied service technician in the diagnosis of a problem and the co ...
-
Heatiator CB4842IR - page 33
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 33 Sym pt om Possi bl e Cau se Cor re c ti ve Act i on 1 . Pilot won’t light. T he ignitor/mo dule makes noise, but n o spar k. A . Incor re ct w iri ng. Verif y “S” wi re (white ) for sens or and “ I ” wir e ( oran ge ) for ignito r are co nnec ted to c or rec t ter minal ...
-
Heatiator CB4842IR - page 34
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 34 1 6 Re ference Mater ials A. Appliance Dimension Diagram D i me ns io n s ar e ac t u a l ap pl ia n ce di me ns i o n s. U se f o r r ef er en c e o nl y. Fo r f ra min g dim en sio ns an d cle ar anc es re fe r t o Se cti on 5. Figure 16.1 Appliance Dimensions 38-1/4 in. (972 mm ...
-
Heatiator CB4842IR - page 35
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 35 B. Service Parts List Service Parts 06/09 Service Parts Diagram Part number list on following page. Log Set Assembly CB4236IR Caliber Gas Fireplace 22 21 20 19 10 12 13 14 17 18 16 15 1 1 8 7 9 6 3 1 2 4 5 Beginning Manufacturing Date: Jan 2005 Ending Manufacturing Date: Active Se ...
-
Heatiator CB4842IR - page 36
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 36 Service Parts 06/09 Service Parts Diagram Part number list on following page. Log Set Assembly Caliber Gas Fireplace 22 21 20 19 10 12 13 14 17 18 16 15 1 1 8 7 9 CB4842IR 6 3 1 2 4 5 Beginning Manufacturing Date: Jan 2005 Ending Manufacturing Date: Active Service Parts 06/09 Serv ...
-
Heatiator CB4842IR - page 37
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 37 Service Parts 06/09 IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTIO ...
-
Heatiator CB4842IR - page 38
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 38 C. Optional Components Refractory Kit WTBC36DB - For 36 in. BV WTBC42DB - For 42 i ...
-
Heatiator CB4842IR - page 39
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 39 Model # Description FFCM36-B Modernist-style black decorative faux front FFCM36PT Modernist-style pewter decorative faux front FFCM36BN Modernist-style brushed nickel decorative faux front FFCAC36-B Arts & Crafts-style black decorative faux front FFCAC36PT Arts & Crafts-st ...
-
Heatiator CB4842IR - page 40
Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09 40 D. Contact Information Please contact your Heatilator dealer with any questions or concerns. For the location of your nearest Heatilator dealer , please visit www .heatilator .com. - NOTES - ________________________________________________________________________________ _________ ...
¿Tienes una pregunta acerca de Heatiator CB4842IR?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Heatiator CB4842IR, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Heatiator CB4842IR probablemente compartirá una forma de solucionarlo.