-
Mitsubishi Electronics X250 - page 1
EN – 1 ENGLISH X 250 S 250 LCD Projector User Manual MODEL LVP-X250U / LVP-S250U FRANÇAIS DEUTSCH ITALIANO ESPAÑOL APPENDIX ...
-
Mitsubishi Electronics X250 - page 2
EN – 2 RISK OF ELECTRIC SHOCK DO NOT OPEN CA UTION CA UTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ...
-
Mitsubishi Electronics X250 - page 3
EN – 3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview ............................................................................................... 6 Using the remote control ...................................................................... 8 Battery installation ...
-
Mitsubishi Electronics X250 - page 4
EN – 4 Important safeguards Please read all these instructions regarding your LCD projector and retain them for future reference. Follow all warnings and instructions marked on the LCD pro- jector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions The safety and ...
-
Mitsubishi Electronics X250 - page 5
EN – 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Never remove the cabinet. This projector contains high voltage circuitry. An inadve ...
-
Mitsubishi Electronics X250 - page 6
EN – 6 Overview LAMP VOLUME ZOOM/ FOCUS TEMP VIDEO ENTER COMPUTER MUTE AUTO POSITION MENU 1 2 3 4 5 11 10 9 8 7 6 14 13 12 4 7 65 1 2 3 89 1 0 L R AUDIO VIDEO S-VIDEO MAIN AC IN AUDIO OUT VIDEO 1 IN VIDEO 2 IN COMPUTER OUT AUDIO 2 IN COMPUTER 2 IN AUDIO 1 IN COMPUTER 1 IN OI 1 2 34 5 6 7 8 9 10 11 12 13 14 REMOTE USB RS-232C Control panel T ermin ...
-
Mitsubishi Electronics X250 - page 7
EN – 7 ENGLISH Bottom side About laser beam This remote control is class 2 (max. output 1 mW laser diode 645 nm) laser equipment. LASER RADIATION DO NOT STARE INTO BEAM WAVE LENGTH : 645nm MAX OUTPUT : 1mW CLASS II LASER PRODUCT CAUTION 1 3 2 4 5 1 Release buttons (Left/Right) 2 Adjustment foot (Left/Right) 3 Air inlet cover (bottom) / Filter cov ...
-
Mitsubishi Electronics X250 - page 8
EN – 8 Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). 3. Replace the back cover. Important: • Do not use a new battery with an old one. ...
-
Mitsubishi Electronics X250 - page 9
EN – 9 ENGLISH Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector . Front projection T o find the approximate distance between the projector and screen: Multiply the width of the screen ✕ 1.9 (min.) , Multiply the width of the screen ✕ 2.4 (max.). • Refer to the ch ...
-
Mitsubishi Electronics X250 - page 10
EN – 10 Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com- puters having analog RGB output. Important: • Make sure that your equipment is turned off before connection. • Plug in firmly and unplug by holding the plug, not by pulling the main power cable. • If conne ...
-
Mitsubishi Electronics X250 - page 11
EN – 11 ENGLISH Connection For IBM PC or IBM PC compatibles to monitor port computer PC audio cable (optional) RGB cable for PC RGB cable for PC (optional) to AUDIO IN to PC audio output to PC monitor to COMPUTER IN to COMPUTER OUT When outputting to both a PC monitor and the projector. For Macintosh to video port computer MAC adapter for RGB cab ...
-
Mitsubishi Electronics X250 - page 12
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector . 2. Connect the power cord to the wall power outlet. 3. Remove the lens cap. W arning: • Do not look directly into the lens when projector is “ON”. • The lens cap is for protecting the lens ...
-
Mitsubishi Electronics X250 - page 13
EN – 13 ENGLISH T o operate projector power ON • The picture might not be of optimum performance in extreme hot or cold conditions. (The projector is not malfunctioning.) 4. Select the desired external input source by using the COMPUTER or VIDEO button. • The projector automatically selects the appropriate signal format. The selected signal f ...
-
Mitsubishi Electronics X250 - page 14
EN – 14 Turning off the projector 9. Press the POWER button. The message “POWER OFF? YES : PRESS AGAIN” appears on the screen. • T o exit from this mode, press any button except POWER, LASER, mouse pointer , R/L-click, STILL and VOLUME + and - buttons. 10.Press the POWER button again. The light source lamp will be turned off. Pressing the P ...
-
Mitsubishi Electronics X250 - page 15
EN – 15 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Auto power off time setting 1. Press the MENU button. 2. Press the $ or % button to select the OPTION menu. 3. Press the ENTER button (or } button). 4. Press the { or } button to select AUTO POWER OFF . 5. Press the $ or % button to adjust auto power off time. 6 ...
-
Mitsubishi Electronics X250 - page 16
EN – 16 Opt IMAGE REVERSE INSTALLATION KEYSTONE 0˚ AUTO POWER ON ON AUTO POWER OFF TEST SIGNAL TEST R ON 0 min ON OFF Opt MENU POSITION OPTION MODE DISPLAY ON SPLASH SCREEN ON CINEMA MODE AUTO VIDEO SIGNAL AUTO LANGUAGE English ON ON A Ë ? 1 PICTURE CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher as the number increa ...
-
Mitsubishi Electronics X250 - page 17
EN – 17 ENGLISH 5 SIGNAL HORIZ. POSITION .... Use to adjust the horizontal position of the image. VERT. POSITION ..... Use to adjust the vertical position of the image. FINE SYNC. ....... Use to synchronize the projector with PC input signals so that the image is not blurred. TRACKING ......... Use to avoid image noise such as wide stripes. COMPU ...
-
Mitsubishi Electronics X250 - page 18
EN – 18 Adjusting the image Y ou can adjust the picture by using the IMAGE menu. EXAMPLE: USER setting of COLOR TEMP . 1. Select COLOR TEMP in IMAGE menu. 2. Press the $ or % button to select 4 2 . 3. Press the ENTER button. 4. Press the { or } button to select the desired item. 5. Press the $ or % button to adjust the item . 6. Repeat steps 4 an ...
-
Mitsubishi Electronics X250 - page 19
EN – 19 ENGLISH Specification of RGB signals in each computer mode of the projector (For LVP-X250U) Signal mode resolution horizontal V ertical Normal mode Real mode (H x V) frequency (kHz) frequency (Hz) (H x V) (H x V) TV60 – 15.73 59.94 1024 x 768 – TV50 – 15.63 50.00 1024 x 768 – HiV ision – 33.75 60.00 1024 x 576 – PC98 640 x 400 ...
-
Mitsubishi Electronics X250 - page 20
EN – 20 Specification of RGB signals in each computer mode of the projector (For LVP-S250U) • Pressing the EXP AND button on the remote control twice will switch to the screen displaying the pic- ture as its original size (real screen display). In the real screen display , pictures will be black-framed when picture resolution is lower than 800 ...
-
Mitsubishi Electronics X250 - page 21
EN – 21 ENGLISH Advanced features for presentation Expand By pressing the EXP AND button on the remote con- trol, you can view the detailed image of the picture. Y ou can also view the screen diplaying the picture as its original size (real screen display) by pressing the button again. Using the Expand mode 1. Press the EXP AND button. • Y ou c ...
-
Mitsubishi Electronics X250 - page 22
EN – 22 Mouse remote control By connecting to personal computer through the USB, PS/2 or ADB port, you can operate your computer with the projector remote control. Connection Projector + PC with USB connector Operation Projector + Macintosh • T urn off personal computer and the projector before connecting with PS/2 port or ADB port. If connecti ...
-
Mitsubishi Electronics X250 - page 23
EN – 23 ENGLISH The lamp is designed to project the image on the LCD panels. When the lamp no longer functions, replace it with a new one. Caution: • Do not remove the lamp immediately after using the projector , you may get burned because of the high temperature of the lamp. • When you replace the lamp, press the power button to power off, t ...
-
Mitsubishi Electronics X250 - page 24
EN – 24 Maintenance Caution: Be sure to turn off the projector and unplug the power cord from the wall outlet before you perform any main- tenance on the projector . Cleaning the air-filter This projector has two air-filters, for bottom air-outlet slots and for front air outlet slots. Clean the air -filter frequently . If the filter or ventilatio ...
-
Mitsubishi Electronics X250 - page 25
EN – 25 ENGLISH T roubleshooting The following offers solutions to some of the common problems you may encounter . W e suggest that you consult this chart before contacting your dealer . CAUSE • The air inlet slots, outlet slots or air filter is clogged with dust or some objects. POWER indicator does not light up. • Power cord is unplugged fr ...
-
Mitsubishi Electronics X250 - page 26
EN – 26 Indicators The projector has three indicators each of which shows the working condition of the projector . The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your dealer . POWER indicator LAMP indicator TEMP indicator LAMP VOLUME ZOOM/ FOCUS TEMP VIDEO ENTER COMPUTER MUTE AUTO PO ...
-
Mitsubishi Electronics X250 - page 27
EN – 27 ENGLISH Specifications LCD projector L VP-X250U | L VP-S250U AC100 ~ 240V , 50 / 60Hz 2.9 A L VP-X250U L VP-S250U 1.3-inch LCD panel: 3 pieces (for R, G, B) 1.3-inch LCD panel: 3 pieces (for R, G, B) Pixels 1,024 × 768 = 786,432 pixels Pixels 800 × 600 = 480,000 pixels T otal 2,359,296 pixels T otal 1,440,000 pixels Active pixel rate: 9 ...
-
Mitsubishi Electronics X250 - page 28
EN – 28 1 Remote control 939P790-40 1 Remote control cable 246C217-30 1 User’s manual 871D293-30 1 Quick reference card 857B017-10 2 Battery for remote – Connectors PC analog RGB input Use to input video signals (analog RGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) PIN NO. SPEC PIN NO. SPEC 1 R(RED)/C R 9– 2 G(GREEN)/ ...
¿Tienes una pregunta acerca de Mitsubishi Electronics X250?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Mitsubishi Electronics X250, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Mitsubishi Electronics X250 probablemente compartirá una forma de solucionarlo.