-
Aiwa CSD-NS1 - page 1
CSD-NS1 8B-CH1-903-01 010325ACK-I-IN U OPERA TING INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D’EMPLOI English : See page 2. En Español : V er la página 14. E F r ançais : V oir page 26. F DIGIT AL AUDIO SYSTEM SISTEMA DE AUDIO DIGIT AL SYSTÈME AUDIO-NUMÉRIQUE ...
-
Aiwa CSD-NS1 - page 2
2 ENGLISH Precautions Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. All warnings and cautions in the Operating Instructions and on the unit should be strictly followed, as well as the safety suggestions below. Installation 1 Water and moisture - D ...
-
Aiwa CSD-NS1 - page 3
ENGLISH 3 4 Extension cord - To help prevent electric shock, do not use a polarized AC power plug with an extension cord, receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure of the blades of the plug. 5 When not in use - Unplug the AC power cord from the AC outlet or remove all the batteries if the u ...
-
Aiwa CSD-NS1 - page 4
4 ENGLISH Power supply Connecting antennas Connect the AM loop antenna to the AM LOOP terminals on the rear of the unit. Keep the antenna away from metallic objects, electrical equipment and cords. For better FM reception, connect an outdoor antenna to the FM 75 Ω terminals. Using on AC house current Connect the AC cord as illustrated below. The ...
-
Aiwa CSD-NS1 - page 5
ENGLISH 5 POWER FUNCTION En Remote contr ol Insert two R6 (size AA) batteries. • When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries. • Remove the batteries if the remote control is not going to be used for a long time. The remote control may not operate correctly when: - The unit is exposed to int ...
-
Aiwa CSD-NS1 - page 6
6 ENGLISH 1 Press * TUNER/BAND repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received. * or BAND on the remote control 2 Press r , t (TUNING f - , + g ) to select a station. During FM stereo reception, “STEREO” is displayed. After listening, press POWER 6 STANDBY/ON to turn the power off ...
-
Aiwa CSD-NS1 - page 7
0-9, +10 MODE EQ a PAUSE VOLUME k , i s BAND DISPLAY r , t c PLAY ENGLISH 7 PRESETTING STATIONS You can preset up to 15 stations in each band. 1 Select a station. 2 Press * a PAUSE/SET once so that “MEMO” flashes to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band. * or a PAUSE on the ...
-
Aiwa CSD-NS1 - page 8
8 ENGLISH 1 Press CD. The power is turned on. 2 Press CD OPEN/CLOSE to open the disc compartment. Set a disc with the printed side up, then press CD OPEN/CLOSE to close the disc compartment. Total number of tracks and total playing time are displayed. It will take about 15 seconds when loading a CD-RW disc. 3 Press d PLAY/DIR/PRESET to start play. ...
-
Aiwa CSD-NS1 - page 9
ENGLISH 9 0-9, +10 REPEAT a PAUSE MODE s STOP r , t c PLAY PROGRAMMED PLAY Up to 30 tracks can be programmed from the disc. Operate with the remote control. 1 In stop mode, press MODE repeatedly until “MEMO” flashes in the display. 2 Press the numbered buttons 0-9 and +10 to program a track. Example: To select the 12th track, press +10 and 2. T ...
-
Aiwa CSD-NS1 - page 10
Use Type I (normal) tapes only. PLAYBACK 1 Press TAPE/REV MODE. The power is turned on. If the tape has been inserted, play begins. 2 Press TAPE OPEN/CLOSE to open the cassette compartment and load a tape with the exposed side facing forward. Press TAPE OPEN/CLOSE to close the compartment. 3 Press d PLAY/DIR/PRESET to start playback. s STOP/CLEAR ? ...
-
Aiwa CSD-NS1 - page 11
En To prevent accidental erasure Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording. To record on the tape again Cover the tab openings with adhesive tape, etc. Tab for side A Side A RECORDING 1 Load a tape with the side to be recorded on facing up and the exposed side facing forward. 2 Press TA ...
-
Aiwa CSD-NS1 - page 12
12 ENGLISH TIMER OPERATION D TIMER PLAYBACK/RECORDING The unit can be turned on at a specified time every day with the built-in timer. Make sure the clock is set correctly. 1 Press TIMER twice for timer play or three times for timer recording so that “ 5 ” or “ 5 REC” flashes in the display. 2 Turn VOLUME/TIMER to specify the timer-on time. ...
-
Aiwa CSD-NS1 - page 13
En ENGLISH 13 Maintenance To clean the cabinet Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner. To clean the heads When the tape heads are dirty; - high frequency sound is not emitted - the sound is not adequately high - the sound is off-balance - the tape cannot be era ...
-
Aiwa CSD-NS1 - page 14
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installe ...
¿Tienes una pregunta acerca de Aiwa CSD-NS1?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Aiwa CSD-NS1, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Aiwa CSD-NS1 probablemente compartirá una forma de solucionarlo.