-
Chamberlain EL25 - page 1
Quickstar t EL25 Keypad Pr ogramming Guide EL25 Keypad Pr ogramming Guide T elephone entr y/access control sy stem wit h a 25 direct ory code capacit y ® ™ © 2005 The Chamberlain Group, Inc. All Rights Reser ved Quickstar t This Quickstart Guide is intended to highlight some applications. These instructions are not intended to be comprehensive. ...
-
Chamberlain EL25 - page 2
Page 1 Programming Number Factory Setting Description of T ask Programming Procedure *** 12 # Enable/Disable T rue Anti-Passback (0 = disable; 1 = enable) # Enable/Disable Timed Anti-Passback (0 = disable; 1 = enable) # 15 # (0 – 1; 0 = one long ring, 1 = double ring) # 14 # (1 – 9) # Disabled 11 Enable/Disable Unlock Time Zone 11 # (0 = disabl ...
-
Chamberlain EL25 - page 3
Page 2 Programming Number 30 30 # (time zone number , 2-63) # (segment number; 99) # (starting time = hhmm; 99) # (ending time = hhmm) # (day of week, 1-8; 1 = Sunday; 7 = Saturday; 8 = holiday) # Create a Time Zone 29 Reset the Unit 31 # (door 1-4) # (time zone, 2-63; 99) # 31 Assign Door Auto Lock/Unlock Time Zone Disabled Factory Setting Descrip ...
-
Chamberlain EL25 - page 4
Page 3 Factory Setting Description of T ask Programming Procedure Programming Number 61 # (door 1-4) # (relays to activate 0000-1111) # Order of relay is: relay 4 – relay 3 – relay 2 – relay 1 for an example if you want relay 4 active you would enter 1000, if you want relay 1 active you would enter 0001 60 # (device 1-4) # (device type 0-2; 0 ...
-
Chamberlain EL25 - page 5
Page 4 Factory Setting Description of T ask Programming Procedure Programming Number 86 Verify a Card 85 Replace a Card 88 Delete a Card 90 Add a Basic T ransmitter 90 # (transmitter PIN code) # (facility code) # (sequence number) # (ID number) # (button number) # 87 Activate or Deactivate a Card 91 Add or Edit a Full Function T ransmitter Configur ...
-
Chamberlain EL25 - page 6
Page 5 Factory Setting Description of T ask Programming Procedure Programming Number Verify Multi-Unit Number 111 # 105 Enable or Disable Anti-Passback Forgiveness at Midnight 105 # (0 = disable; 1 = enable) # Change the Visitor Call Response Keys 116 9, 5, 3, 7, 2, 1, * Enabled 109 Override T elephone Company Answering Service 109 # (0 = no; 1 = y ...
-
Chamberlain EL25 - page 7
Page 6 Programming Basics Programming Single Unit Over view Programming Single Unit Over view 1 1, 2 or 3 digit Programming Number . (See “ Quick Reference Guide ” T ables for descriptions and procedures) 2 One or more Data Fields . 3 Pound Key ( # ) as a Data Field Separator and at the end of the programming sequence to Save the Data . • • ...
-
Chamberlain EL25 - page 8
Page 7 Enter Programming Mode Exit Programming Mode 1 Press 2 Enter the ( 6 ) six-digit password. The default is six zeroes. If you will be programming the unit via modem, please refer to the V ersa XS online help. After entering programming mode for the first time, we suggest you change the password to maintain the security of your system. Importa ...
-
Chamberlain EL25 - page 9
Page 8 System Feedback / Responses (Beeps) 2 Short Beeps: Programming step was valid. 3 Short Beeps: Programming mode was exited. 1 Long Beep: Input was not valid. 2 Long Beeps: Duplicate entry code was entered. 3 Long Beeps: Memory is full. 4 Long Beeps: Unit has reset or is powering up. Busy Signal: Line is busy or Do Not Disturb feature is in ef ...
-
Chamberlain EL25 - page 10
Page 9 Programming Multiple Units Over view Note: Yo u cannot program a unit within a multi-unit chain from a local/remote DTMF phone (T ouch-T one) unless you know the unit's ID number . Therefore, you can only verify the unit number while programming from the unit's front keypad. Up to seven (7) EL25s can be installed on a single teleph ...
-
Chamberlain EL25 - page 11
Page 10 Getting Started EL25 SetUp “Y our Settings” Change the unit password to prevent any tampering with your system's database. When changing the password, save a copy of it in a secure location. If you lose the password, you will not be able to enter into programming mode. Factory Setting: 000000 (See Page 6) The EL25 comes preprogramm ...
-
Chamberlain EL25 - page 12
Page 11 A relay is a device that reacts to an electric current to activate other devices. Allowing the EL25 to lock or unlock a door/gate, shunt (bypass) alarm contacts, signal an alarm, or turn on a camera wired to a closed-circuit television (CCTV). The relays can be programmed to 5 different modes. The EL25 must have all external access control ...
-
Chamberlain EL25 - page 13
Page 12 T o perform these 4 steps you MUST know EXACTL Y where the External Access Control Device(s) were wired in “Y our” EL25! When the table on page 14 is completed by you or your installer , this will help you understand “Y our” personal layout. If you do not know this, DO NOT PROCEED. Consult your Installer and/or refer to the installa ...
-
Chamberlain EL25 - page 14
Page 13 1 Press 2 Enter the Relay Number (1-4). Then ( # ) 3 Enter Activation Time (1-300 Seconds). Then ( # ) Then 1 Press 2 Enter Door Number (1-4). Then ( # ) 3 Enter Relays to be Activated (0000-1111). Then ( # ) Then Example: 1 2 3 1 2 3 Assigns Relay “2” as a Shunt Relay When Activated, the Relay Number “4” will activate for “30” ...
-
Chamberlain EL25 - page 15
Page 14 Sample: EL25 Controlling 1 Door (Page 16) EL25 SetUp “Y our Settings” EL25 SetUp “Y our Settings” When “ Y our Door Settings ” or “ Door 1,2,3 or 4 ” are referenced throughout this guide, this completed chart will outline how your EL25 system will function. Location Relay Relay Mode Relay Function Relay Activation Time (Seco ...
-
Chamberlain EL25 - page 16
Page 15 How your system has been wired is an important part of programming it. Write down your configuration. T o help visualize it, draw a map of it below . If you're unsure of your setup, consult your dealer/installer for more information. EL25 SetUp “Y our Settings” Y our System Layout EL25 SetUp “Y our Settings” Relay 1 Device 0 Do ...
-
Chamberlain EL25 - page 17
Page 16 EL25 SetUp “Y our Settings” EL25 SetUp “Y our Settings” Relay 1 - Strike Mode Unlocks Door for 10 sec. Relay 2 - Control Mode T urns on Security Light for 60 sec. Relay 3 - Alarm Mode Sounds Siren for 10 sec. Relay 2 - Shunt Mode Bypasses/Signals Alarm for Maglock for 40 sec. Relay 4 - CCTV Mode Activates Camera for 10 sec. EL25 Mai ...
-
Chamberlain EL25 - page 18
Page 17 EL25 SetUp “Y our Settings” EL25 SetUp “Y our Settings” EL25 Main Keypad (Front Door) Wiegand Keypad (Exit) Card Reader (Back Door) Card Reader (Manager's Door) EL25 Controlling 4 Doors Relay 1 - Strike Mode Unlocks Door for 10 sec. Relay 2 - Strike Mode Unlocks Door for 10 sec. Relay 3 - Strike Mode Unlocks Door for 10 sec. Re ...
-
Chamberlain EL25 - page 19
Page 18 Location Door No. Relay Relay Mode Relay Function Relay Activation Time (Seconds) Driveway Pedestrian Gate In EL25 1 Strike Opens Vehicular Gate 10 sec. 2 Control T urns on Security Light 10 sec. Device Main Keypad and (REX) Exit Request CCTV Wiegand Card Reader Door 1 Door 2 Door 3 3 Strike Unlocks Pedestrian Gate 10 sec. 4 CCTV Activates ...
-
Chamberlain EL25 - page 20
Page 19 Location Relay Relay Mode Relay Function Relay Activation Time (Seconds) Front Door (Entrance) Vehicular Gate Pool Gate Front Door (Entrance) 1 Strike Unlocks Door 10 sec. 2 Strike Unlocks Door 10 sec. Device Main Keypad T ransmitter and REX Exit Device Wiegand Card Reader Siren Door 1 Door 2 Door 3 Door 4 3 Strike Unlocks Door 10 sec. 4 Sh ...
-
Chamberlain EL25 - page 21
Page 20 Entr y Codes Access Cards 1 Press 2 Enter Entry Code (3-9 digits). Then ( # ) Factory Setting for Entr y Code Length is 4 digits See “Entry Code Length” above. Add an Entr y Code ONL Y . For adding or editing full function Entry Codes (i.e., codes with additional options such as use schedules, door assignments, etc.). Note: A basic Entr ...
-
Chamberlain EL25 - page 22
Page 21 Transmitters 1 Press 2 Enter T ransmitter Number (1-65534). Then ( # ) Add a Basic transmitter to the system's database. A basic transmitter will be active, unlock all doors/gates assigned to the RF module with no time constraints (i.e., can be used 24 hours a day , 7 days a week.). Activates transmitter number “34430”, facility co ...
-
Chamberlain EL25 - page 23
Page 22 Appendix Appendix Quick Reference Guide Glossary Appendix Glossar y Glossar y Glossar y Glossar y Glossar y Glossar y Access Device (RF Receiver , Card Reader , or Keypad) - A device that reads transmitter , card or entry codes, allowing the system to allow or reject entry based on the code's validity . Access Codes - Codes that enable ...
-
Chamberlain EL25 - page 24
Page 23 Appendix Appendix Quick Reference Guide Glossary Appendix Gate or Door - Used synonymously throughout the manual, these terms refer to controllable entry/exit areas of the complex, normally a gate or door . Holiday Schedules - Holiday schedules will modify fixed schedules for selected holiday dates. ID Number - One part of the number sequen ...
-
Chamberlain EL25 - page 25
Page 24 Appendix Appendix Appendix Appendix Access Cards Direct Commands Entry Codes Programming – Enter Program Mode – Exit Program Mode – Multiple Units – Single Unit Quick Reference Guide Quick Reference Guide System – Clock – Feedback/Responses – Password – Unit’ s ID Setup – Doors – Relays T ransmitters Glossary Glossary ...
-
Chamberlain EL25 - page 26
© 2005 The Chamberlain Group, Inc. All Rights Reser ved 114A3042 845 Lar ch Avenue Elmhurst, Illinois 60125-1196 ® ™ ...
¿Tienes una pregunta acerca de Chamberlain EL25?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Chamberlain EL25, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Chamberlain EL25 probablemente compartirá una forma de solucionarlo.