-
Adder Technology AV Series - page 1
AdderLink A V series Digital Signage Extenders TRANSMITTER LINK 2 LINK 3 LINK 4 1 0 4 ADDERLINK I N I N ...
-
Adder Technology AV Series - page 2
1 SECT 1 Contents W elcome Introduction ................................................................................. 2 Standard AdderLink A V models ...................... ...
-
Adder Technology AV Series - page 3
2 SECT 2 W elcome Intr oduction The AdderLink A V range of digital signage extenders are designed and built specically for use wherever high quality video and sound must be ...
-
Adder Technology AV Series - page 4
3 AdderLink A V200 pair The AdderLink A V200 transmitter and receiver pair operate in a similar manner to the A V100 series, with the addition of an RS232 serial port. The seri ...
-
Adder Technology AV Series - page 5
4 F urther expansion T ransmitter cascading As mentioned earlier , the A V100, A V104 and A V200 transmitters are all capable of supporting additional transmitter modules (and ...
-
Adder Technology AV Series - page 6
5 For each A V module: Power supply adapter and country-specic mains cable Self adhesive rubber feet Video cable to connect a transmitter to the source PC and optionally to ...
-
Adder Technology AV Series - page 7
6 RECEIVER SKEW GB SKEW RG BRIGHT SHARP LIN K OUT 1 0 1 ADDERLINK O U T O U T M odule features TRANSMITTER LINK 2 LINK 3 LINK 4 1 04 ADDERLINK I N I N T ransmitter module (A V1 ...
-
Adder Technology AV Series - page 8
7 I nstallation Locations Please consider the following important points when planning the positions of your AdderLink A V modules: • T ake care not to exceed the maximum lin ...
-
Adder Technology AV Series - page 9
8 U sing the rear mounting slot The slot at the rear of each module allows it to be hung upon a xed scr ew that protrudes fr om the mounting surface. IMPORT ANT : The intern ...
-
Adder Technology AV Series - page 10
9 U sing the optional rack mount chassis 1 Place the optional rack plate onto the front of the transmitter or receiver module and secure it with the countersunk scr ews. 2 Orie ...
-
Adder Technology AV Series - page 11
10 Making standar d connections Connections to the AdderLink A V modules do not need to follow the precise order given in this user guide although it is r ecommended that you d ...
-
Adder Technology AV Series - page 12
11 T o connect the link cable(s) The links between the transmitter and r eceiver modules are made using between one and four twisted pair cables, specied to Category 5 or hi ...
-
Adder Technology AV Series - page 13
12 T o connect the power supply NOTE: Please read and adhere to the electrical safety information given within the Safety information section of this guide. In particular , do ...
-
Adder Technology AV Series - page 14
13 Link in The link from the transmitter to each r eceiver module is made using a twisted pair cable, specied to Category 5 or higher . When a single receiver is attached to ...
-
Adder Technology AV Series - page 15
14 RECEIVER SKEW GB SKEW RG BRIGHT SHARP 200 ADDERLINK O U T O U T T o connect the power supply NOTE: Please read and adhere to the electrical safety information given within t ...
-
Adder Technology AV Series - page 16
15 Making cascade connections The AdderLink A V series of products have been specically designed to be exible in order to support both your immediate and futur e needs fo ...
-
Adder Technology AV Series - page 17
16 Cascading transmitters Expansion at the transmitter end is achieved using the video and audio output ports. The signals from these ports ar e connected to the video and audi ...
-
Adder Technology AV Series - page 18
17 Cascading r eceivers (A dderLink A V101 only) Expansion at the receiver end is made possible using the LINK OUT ports present on AdderLink A V101 receivers. Receiver cascade ...
-
Adder Technology AV Series - page 19
18 Operation In operation, the AdderLink A V modules are designed to be completely transparent - high quality video and audio fr om the source PC system ar e played as normal, ...
-
Adder Technology AV Series - page 20
19 S kew compensation adjustments (A V101 & A V200 only) The twisted pair cabling used to link the AdderLink A V modules consists of four pairs of wires per cable. Three of ...
-
Adder Technology AV Series - page 21
20 T o zero the skew adjustment dials When supplied, the two skew dials are set in their neutral positions. i.e. no delay to either of its colours. However , if the module has ...
-
Adder Technology AV Series - page 22
21 F ur ther infor mation T roubleshooting If you experience problems when installing or using the AdderLink A V modules, please check through this section for a possible solut ...
-
Adder Technology AV Series - page 23
22 Safety infor mation • For use in dry , oil free indoor envir onments only . • Do not use to link between buildings. • Not suitable for use in hazardous or explosive en ...
-
Adder Technology AV Series - page 24
23 P roducts in the AdderLink A V range The following items are available within the AdderLink A V product range: • AdderLink AV100 pair (part number: ALA V100P) One AdderLin ...
-
Adder Technology AV Series - page 25
24 Emissions and I mmunity A Category 5 (or better) twisted pair cable must be used to connect the modules in order to maintain compliance with radio fr equency energy emission ...
-
Adder Technology AV Series - page 26
25 © 2006 Adder T echnology Limited All trademarks are acknowledged. Release 1.0d August 2006 Part No. ADD0059 Adder T echnology Limited, T echnology House, T rafalgar Way , B ...
¿Tienes una pregunta acerca de Adder Technology AV Series?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Adder Technology AV Series, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Adder Technology AV Series probablemente compartirá una forma de solucionarlo.