-
Premier Mounts AM3 - page 1
INSTALLATION INSTRUCTIONS AM3/AM3-B Universal Swingout Arm NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada – Phone: 800-368-9700 Fax: 800-832-4888 EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 AUSTRALIA, NEW ZEALAND, OCEANIA (DIST ...
-
Premier Mounts AM3 - page 2
Page 2 Installation Instructions Table of Contents PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACH- MENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES O ...
-
Premier Mounts AM3 - page 3
Installation Instructions Page 3 Parts List This wall mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700). Installation Tool ...
-
Premier Mounts AM3 - page 4
Page 4 Installation Instructions M4 x 16 M8 x 70 M8 x 35 (Qty 8 ) (Qty 8) (Qty 8) (Qty 8) (Qty 8) M8 x 30 M8 x 25 (Qty 8) M6 x 30 M8 x 2 0 (Qty 8) (Qty 8) (Qty 8) (Qty 8) (Qty 4 ) (Qty 8) M6 x 20 (Qty 8) M8 x 45 (Qty 8 ) (Qty 8) M6 x 45 M5 x 16 M5 x 25 M5 x 20 M5 x 12 M4 x 2 5 (Qty 8) (Qty 8) M6 x 16 M5 x 5 0 AM3/AM3-B ...
-
Premier Mounts AM3 - page 5
Installation Instructions Page 5 The nylon spacers may be stacked to achieve proper spacing. 5/16" Flat washers (metal ) 1/4" Nylon spacer s (Qty 8) (small ) (Qty 8) 1/2" Nylon spacers 1/4" Nylon spacer s (Qty 12) (large ) (Qty 8) (large ) (Qty 8) Nylon sleeves 9/16" Nylon spacers (Qty 8 ) 1" Nylon Spacers (Qty 8 ) AM3 ...
-
Premier Mounts AM3 - page 6
Page 6 Installation Instructions Thread Depth Indicator 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the fl at panel to make sure the inserts measure the same full depth and mark it (Figure 1). 2. Locate the correct diameter screw for the thread insert. Compare your marking to the screws (supplied ...
-
Premier Mounts AM3 - page 7
Installation Instructions Page 7 WHEN MOUNTING THE AM3, THE SIDE THA T THE SWINGOUT ARM IS LOCA TED ON MUST HA VE A LAG BOL T MOUNTED ON A T LEAST ONE SIDE (SEE FIGURE 1), T OP AND BOTTOM. Mount Orientation The AM3/AM3-B Plasma Mount has the built-in capability of mounting with the swingout arm on either the left or right-hand side. Step 1. To chan ...
-
Premier Mounts AM3 - page 8
Page 8 Installation Instructions Mount Installation AM3/AM3-B Before proceeding with the mount installation, you should already have the mounting holes pre-drilled. Please use the template (supplied) and follow the instructions. For ease of installation, it is recommended that two people perform the installation. WHEN MOUNTING THE AM3, THE SIDE THA ...
-
Premier Mounts AM3 - page 9
Installation Instructions Page 9 AM3/AM3-B Nose Piece Orientation Step 1 . Once the mount has been oriented and mounted to the wall, remove the nose piece by removing the tensions bolts. After loosening the tension bolts, be sure that the nose piece is held together tightly before rotating. Step 2 . Detach the nose piece assembly, rotate 180°, and ...
-
Premier Mounts AM3 - page 10
AM3/AM3-B Universal Mounting Bracket Assembly Step 1 . Place the universal bracket bar and the universal brackets on a flat surface. Step 2 . Slide the universal brackets onto the universal bracket bar (as shown in Figure 9) with the set screws facing up. At this time, do not tighten the set screws that are located on the universal bracket. Step 3 ...
-
Premier Mounts AM3 - page 11
AM3/AM3-B Attaching the Display ONCE THE UNIVERSAL BRACKET BAR ASSEMBLY HAS BEEN ATTACHED TO THE DISPLAY, IT IS RECOMMENDED THAT TWO PEOPLE MOUNT THE DISPLAY, AS THE UNIT IS HEAVY AND, IF DROPPED, WILL DAMAGE THE MOUNT, THE DISPLAY, AND/OR PERSONNEL. Figure 10 Figure 11 Step 1 . Slide the display assembly onto the nose piece of the swingout arm. Fi ...
-
Premier Mounts AM3 - page 12
AM3/AM3-B Page 12 Installation Instructions Securing the Display Once the two units have been secured together, the two (2) M6 x 30mm Phillips Head locking screws must be installed in the note d location (Figure 14) to prevent any movement. Figure 14 Universal Bracker Bar M6 x 30mm Phillips Head Screw Swingout Arm M6 x 30mm Phillips Head Screw (Att ...
-
Premier Mounts AM3 - page 13
AM3/AM3-B Installation Instructions Page 13 Tilt Positioning To adjust the display, loosen the tension bolts no more than ½ turn, make the adjustments and then tighten the tension bolts. When tilt positioning is needed to adjust the display, place a hand at the top corner of the display and the other hand at the bottom of the display (Figure 15). ...
-
Premier Mounts AM3 - page 14
AM3/AM3-B Page 14 Installation Instructions Technical Specification All measurements are in inches(mm). ...
-
Premier Mounts AM3 - page 15
AM3/AM3-B Installation Instructions Page 15 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the or ...
¿Tienes una pregunta acerca de Premier Mounts AM3?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Premier Mounts AM3, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Premier Mounts AM3 probablemente compartirá una forma de solucionarlo.