-
Zanussi Z1921/8 FFA - page 1
REFRIGERA TOR- FREEZER ZI 921/8 FF A INSTRUCTION BOOKLET 2223 208-63 ...
-
Zanussi Z1921/8 FFA - page 2
2 IMPOR T ANT SAFETY INFORMA TION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transf erred to another owner , or should you mo ve house and leave the appliance, always ensure that the book is left with the appliance in or der that the new owner can get t ...
-
Zanussi Z1921/8 FFA - page 3
3 CONTENTS Instructions f or the User Important Safety Information 2 Operation 4 Before using 4 Control panel - Use of the freezer 4 Star t your appliance 4 T emperature control 4 Quick-freezing 5 F reezing fresh food 5 F rozen f ood storage 5 Thawing 5 Making ice cubes 5 Use of the refrigerator-Setting the temperature 6 F resh food refrigeration 6 ...
-
Zanussi Z1921/8 FFA - page 4
4 OPERA TION Before using Remov e all securing tapes. W ash inside the appliance with luke warm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger . Dry thoroughly . Control panel A - Pilot light - Green B - Thermostat control knob C - F ast freeze light - Y ellow D - F ast freeze s witc ...
-
Zanussi Z1921/8 FFA - page 5
5 Fast-freezing For f ast-freezing, push the f ast freeze s witch (D). The super control light (C) will then light up. The F ast-freezing function accelerates the freezing of fresh food and, at the same time , protects foodstuffs already stored from undesir able warming. If this function is not ended manually , the appliance switches off the F ast- ...
-
Zanussi Z1921/8 FFA - page 6
6 Normal Operating Sounds • Y ou may hear f aint gurgling or bub bling sounds when the refrigerant is pumped through the coils or tubing at the rear , to the cooling plate/ev aporator or to the fix ed freezer shelv es. • When the compressor is on, the refrigerant is being pumped round, and you will hear a whirring sound or pulsating noise from ...
-
Zanussi Z1921/8 FFA - page 7
7 Mov able shelves The walls of the refrigerator hav e runners so that the shelves can be positioned as desired . For better use of space , the front half-shelves can lie ov er the rear ones. D338 P ositioning the door shelves T o per mit storage of food pac kages of various sizes , the door shelves can be adjusted in height. T o do this proceed as ...
-
Zanussi Z1921/8 FFA - page 8
8 Food Storage • T o obtain the best results from your appliance, neither hot foods nor liquids which ma y ev aporate, should be placed in the larder compar tment. • K eep the time between buying chilled f ood and placing it in your fridge as shor t as possible . • Do not push food together too m uch, tr y to allow air to circulate around eac ...
-
Zanussi Z1921/8 FFA - page 9
Defrosting Refrigerator The refrigerator automatically defrosts ev ery time the compressor stops. The water is discharged, via the pipe, into a tra y located at the back of the appliance abov e the compressor , where it ev aporates. Important T o avoid defrost water o verflo wing into the fridge, periodically clean the water discharge hole in the c ...
-
Zanussi Z1921/8 FFA - page 10
10 SOMETHING NO T WORKING Symptom No power to the appliance The light does not come on The temperature in the fridge or freezer section is too high The freezer door will not open The compressor runs continously Excessive frost and ice has b uilt up Noise W ater under the salad bin Solution Check there is pow er at the sock et. Check there is not a ...
-
Zanussi Z1921/8 FFA - page 11
11 SER VICE AND SP ARE P AR TS CUST OMER CARE DEP AR TMENT In the ev ent of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0870 5 929929 Y our telephone call will be automatically routed to the Ser vice Force Centre co vering your post code area. For ...
-
Zanussi Z1921/8 FFA - page 12
12 Standard guarantee conditions We , Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is prov ed to be defectiv e by reason only of f aulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour , mater ials or carriage on condition tha ...
-
Zanussi Z1921/8 FFA - page 13
13 TECHNICAL SPECIFICA TIONS PO WER SUPPL Y V OL T AGE AND FREQUENCY 220-240 V / 50 Hz T O T AL POWER ABSORBED 160 W A VERA GE D AIL Y UNITS ELECTRICITY * 0.86 kWh GROSS CAP ACITY F ridge 214 l F reezer 68 l NET CAP A CITY F ridge 210 l F reezer 55 l ST AR RA TING * This figure is based on standard test results in accordance with European Standard ...
-
Zanussi Z1921/8 FFA - page 14
14 INST ALLA TION P ositioning This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance. The follo wing table shows which ambient temperature is correct f or each climate classification: SN ...
-
Zanussi Z1921/8 FFA - page 15
15 Electrical connections Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EARTHED . The manufacturer declines an y liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable f or your ...
-
Zanussi Z1921/8 FFA - page 16
16 Fur thermore, it is necessar y that the cabinet has a ventilation recess with the f ollowing dimensions: depth 50 mm width 540 mm Instructions for totall y built-in appliances Door rever sal Recess dimensions Height (1) 1780 mm Depth (2) 550 mm Width (3) 560 mm T o ensure adequate ventilation, allow the clearances shown in figure. 50 mm min. 200 ...
-
Zanussi Z1921/8 FFA - page 17
17 Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the side where the door hinges of the appliances are fitted. Inser t the appliance until the upper strip butts up against the unit (1) and make sure that the low er hinge is in line with the surface of the unit (2). D023 1 2 D724 Apply the se ...
-
Zanussi Z1921/8 FFA - page 18
18 Place guide (Ha) on the inside par t of the furniture door , up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied. 2 1 m m 2 1 m m ca. 50 mm 90° 90° ca. 50 mm Fix cov er (Hc) on guide (Ha) until it clips into place PR33 Hc Ha PR167 Ha Hb 8mm Open the appl ...
-
Zanussi Z1921/8 FFA - page 19
19 If the appliance is fixed to the side of the kitchen unit, simply slack en the screws in fixing brac kets (E), mov e the brack ets as shown in the figure and re- tighten the screws. After completion of the door rev ersing operation, check that the door gask et adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gaske ...
-
Zanussi Z1921/8 FFA - page 20
© Electrolux plc 2007 ...
¿Tienes una pregunta acerca de Zanussi Z1921/8 FFA?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Zanussi Z1921/8 FFA, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Zanussi Z1921/8 FFA probablemente compartirá una forma de solucionarlo.