Español dropdown-ico

Manual de instrucciones Avery 7411

84 de páginas 2.75 mb
Descargar

Pasar a la página of 84

Summary
  • Avery 7411 - page 1

    ® Monarch ® 9825 Printers Operating Instr uctions Operating Instr uctions TC741 1ENOI Rev . AE 1/09 ©2006 Paxar Americas, Inc. a subsidiary of A very Dennison Corp. All rights reserved. ...

  • Avery 7411 - page 2

    Each product and program carries a respec ti ve written warranty, the only warranty on which the cus tomer can rely. Paxar reser ves the right to make changes in the product, the programs, and their a vailability at any time and without notice. Although Paxar has made every effor t to provide complete and accurate information in this manual, Pa xar ...

  • Avery 7411 - page 3

    T ABLE OF CONTENTS GETTING STARTED......................................................................................1-1 Overview ................................................................................................1-1 System Requ irement s ..............................................................................1-2 Network Proto ...

  • Avery 7411 - page 4

    USING THE WEB INTER FACE .......................................................................4-1 Logging In ..............................................................................................4-2 Configuring t he Printe r .............................................................................4-3 Configuring the Prin t Port Se tti ...

  • Avery 7411 - page 5

    TROUBLESHOOTIN G ....................................................................................5-1 General Troubleshooti ng Informat ion .........................................................5-1 Troubleshooting Wireless C onfiguration Problem s.......................................5-5 Troubleshooting Network Configurat io n .............. ...

  • Avery 7411 - page 6

    iv ...

  • Avery 7411 - page 7

    Getting Started 1-1 GETTING ST AR TED The Monar ch  7411  Print Server let s you communicate with the Monarch  9825  printe r on a wire d Ethernet 802.3 netw ork, or on an 802.11b or 802.11g wir eless networ k. 802.11b/g refers to 802.1 1b and 802.11g in t his manual. Information in th is document supercedes information in previous vers ...

  • Avery 7411 - page 8

    System Requirements To use the print se rver for printin g from a wireless networ k, you need an 802.11b/g wireless network. The wireless network con sists of either of the following: An 802.11b/g wireless e nabled PC printi ng straig ht to the p rinter (Ad- Hoc or Peer-to- Peer Mode). ♦ ♦ ♦ ♦ ♦ An 802.11b/g wireless acc ess point a llowi ...

  • Avery 7411 - page 9

    Checking the Print Server Hard ware The print server come s preinstalled and test ed in your printer. Do not plug any cables into the parallel por t when using the print serve r. A printer with this print se rver cannot use t he parallel port. Howeve r, the seria l port is still active. Serial Port Antenna Test/Reset Button Getting Started 1-3 ...

  • Avery 7411 - page 10

    Verifying Successf ul Installation When the prin t server is turned on, it go es through the follow ing startup sequence: It runs throug h a set of power-up dia gnostics for a fe w seconds. The top orange ligh t comes on when th e unit is turned on. The middle light comes on solid yellow when an Ethernet link (wired 10baseT) is established. The bot ...

  • Avery 7411 - page 11

    Sample Test Page The test page is best disp layed using 4” wide by 6” long labels. If the label is too s mall, some information may print o utside the label edges . PAXAR ------------ - MonarchNet Print S erver Status -- ----------- Monarc hNet Networ k Adapter -PLUS FW Ver. CT MO -7.01E (2006. 03.10) Netwar e Retries: 0 Boot Ver. 1.0 Frame ty ...

  • Avery 7411 - page 12

    1-6 Ethernet Operating Instructions ...

  • Avery 7411 - page 13

    2 CONFIGURING THE 802.1 1b/g AND IP SETTINGS Configuring the Print Server To configu re the print server for a 802. 11b/g wireless network, you must set the wirele ss mode (Ad-Hoc or infrastructure), SS ID, channel (A d-Hoc mode only), data rat e and security. All nodes of a wire less network need to hav e the same settings in orde r to communicate ...

  • Avery 7411 - page 14

    2-2 Ethernet Operatin g Instructions ♦ If you are using TCP/ IP, note yo ur comput er’s IP address. The print server needs to be on the same IP segment as the ot her nodes on your network in order to communicate. ♦ You should h ave a good si gnal betwe en your comp uter and the access point. Installing the Software The following op erating sy ...

  • Avery 7411 - page 15

    Note: If the wi reless signal is less th an 50% o n the Wirel ess Status screen, print ing performance could be af fected. To improve the signal stren gth, try moving th e print server cl oser to the computer or access point an d away from other radi o devices such as Blue tooth® wireless devices, microwave ovens, or 2. 4 gigahertz cordless phones ...

  • Avery 7411 - page 16

    2-4 Ethernet Operatin g Instructions ...

  • Avery 7411 - page 17

    3 MANAGEMENT METHODS There are a variety of ways to configure and monitor the prin t server. Th ese methods are: W eb browser, Ne tMgr, MonarchNet Console, HP JetAdmin, HP Web JetAdmin, or Telnet. F or Telnet/co nsole mode information , see Chapte r 6, “ Telnet Co nsole Commands .” MonarchNet Console This is a command-line oriented cons ole tha ...

  • Avery 7411 - page 18

    Microsoft  Windows  Network Configuration The print server inclu des the easy-to-use NetM anager software for pr inting from Windows comp uters over an 802.11b/g wire less link. This softwar e creates a networ k port on the Windows system, which acts like a normal parallel port. As a result , it works tra nsparently wit h any standa rd Window ...

  • Avery 7411 - page 19

    Berkeley UNIX Host Configuration Berkeley UNIX h ost computers include L inux, Digital Equipmen t Corporation Digital UNIX , OSF/1, and ULTRI X; Compaq Tru64 U NIX; SunOS (not Solaris), SCO UNIX ; and many othe rs. Sun Solaris, HP/ UX, IBM AIX users should skip to the appr opriate sections later in this manual. ♦ Do not use the Linu x X-Windows g ...

  • Avery 7411 - page 20

    3. Create the spool direc tory: The l pd spool direct ory is usuall y located in the /usr/spool directory. To c reate a ne w spool d irectory, use the mkdir command; for examp le: mkdir /usr/s pool/lpd/Mona rchPrinter 4. Print using the standard lpr command: lpr –PMonarc hPrinter fil ename 5. For AT&T based UNIX s ystems, such as SCO, use the ...

  • Avery 7411 - page 21

    7. Use the Pri nter Manager i n the Admintool u tility under Open Windows as follows: Select Edit Select Add Select Add Access to Remote Printer At the PrinterName prompt, type any name for th e print queue At the Prin ter Server pr ompt, type: name!servic ename (for examp le, MonarchPri nter!BINARY_P1 ), where: name matches the prin t server nam ...

  • Avery 7411 - page 22

    HP/UX Configuration To configure a print server using HP/ UX 10.x, use the sa me program and these steps: 1. When you get a list of options, select Printers and Plotters . 2. Select LP Spooler . 3. Select Prin ters and Plotters . 4. Select Ac tions an d then Add Re mote Printe r/Plotter . 5. En ter any name as th e Printer Name (this is the name of ...

  • Avery 7411 - page 23

    IBM AIX Conf iguration To configure a print server on IBM AIX 4.x, use the SMIT program as follows: 1. Enter smit and select Devices . 2. Select Printe r/plotter. 3. Select Manage remote printer sub system . 4. Select Client services . 5. Select Rem ote printer que ues . 6. Select Add a remote qu eue . Enter the following remote que ue settings: Na ...

  • Avery 7411 - page 24

    Web Browser This utilit y allows the us er to configure the prin t server with a standa rd web browser like Mic rosoft® In ternet Explorer or Mozilla Firefox®. No addition al software is ne eded on t he system. It can be used on a ny system tha t supports w eb browser capabi lities. Simply type the IP add ress into your Web brow ser address bar t ...

  • Avery 7411 - page 25

    4 USING THE WEB INTERF ACE You can conf igure and man age the prin ter and pri nt server using your Web Browser: Micro soft  Internet Explo rer, version 6.0, or greater or Netscape  Communica tor, version 4.7 or great er or Mozilla Firefox®. Notes: ♦ ♦ ♦ The screen pictures sh own in this manual may not exactly match the s oftware, sin ...

  • Avery 7411 - page 26

    Logging In 1. Start your Web br owser. 2. Type in your printer’s I P address and press Enter . For examp le, 192.0.0. 192. 3. From the side menu, click Login . 4-2 Ethernet Operating Instructions ...

  • Avery 7411 - page 27

    4. Type access for the password. To cha nge the password, see “ Setting the Network Card Access Password ,” for mo re informatio n. The pa ssword is case-sensitiv e and saved in the print er’s flash memory. 5. Click Submit . The Printer St atus page appears wi th information abou t your printer, including printer name , Ethernet address, firm ...

  • Avery 7411 - page 28

    3. Click the rese t link at t he bottom o f the screen . The Reset Serve r screen appears. 4. Click Submit a nd wait fi ve seconds f or the printe r to reset. Even thou gh you submitte d your changes on the previous screen, they d o not take effect until you rese t the printer. You must re-enter you r access password to make any furt her changes to ...

  • Avery 7411 - page 29

    You must re-enter you r access password to make any furt her changes to the printer sett ings. Configuring Print Services Only configure the sett ings required for your network/prin ter. 1. From the side menu, click Print Ser vices . The Configure Service scre en appears. 2. Click the name of the servic e you want to modif y from the available serv ...

  • Avery 7411 - page 30

    You must re-enter you r access password to make any furt her changes to the printer sett ings. Setting NetWar e Parameters You can modi fy the NetWare param eters from your Web bro wser. To update NetWare setting s, use Telnet console comma nds. See Ch apter 6, “ Telnet Console Comma nds ” for more in formation. 1. From the side menu, click Net ...

  • Avery 7411 - page 31

    You must re-enter you r access password to make any furt her changes to the printer sett ings. Changing TCP/IP Settings Only configure the sett ings required for your network/prin ter. 1. From the side menu, click TCP/IP . 2. Click the name of the en abled service to modif y the TCP/I P parameters for that service . See “ Configuring Print Servic ...

  • Avery 7411 - page 32

    You must re-enter you r access password to make any furt her changes to the printer sett ings. Configuring PrintraNet Only configure the sett ings required for your network/prin ter. 1. From the side menu, click PrintraNet . 2. Enter the IP address of the POP3 or SNMP serve r on your network where internet print jobs are loc ated. You may also spe ...

  • Avery 7411 - page 33

    You must re-enter you r access password to make any furt her changes to the printer sett ings. Changing Wireless Settings This screen allows you to set your wireless parameters. You can chang e modes, specify your SSID, modify yo ur channel (Ad-Hoc mo de only), netw ork speed, access poi nt density, an d more. You can also configure net work securi ...

  • Avery 7411 - page 34

    You must re-enter you r access password to make any further changes to the pri nter settings. Configuring Alerts and Traps Alerts and SNMP are supported wi th the rel ease of ve rsion 3.0 o r greater printer firmware. The printer also contai ns the min imum set requ ired to be compliant with MIB version 2 .0 (RFC 3805). Email Alerts To set up an em ...

  • Avery 7411 - page 35

    2. Click Email Alerts to setup the mail server an d select users to receive messages about the pr inter’s status. 3. Enter your SMTP server, email address, and the e rrors you want t o receive no tification for. Y ou can enter up to ei ght email addresse s. 4. Click Submit . 5. Click the rese t link at t he bottom o f the screen . The Reset Serve ...

  • Avery 7411 - page 36

    Receiving An Alert When the print er goes offline, ha s a paper jam, or any other erro r that you selected noti fication for, a simila r email appears in th e specified Use r’s inbox: The text of the email fo llows: MonarchNet2 Printer Alert!!! Prn IP:192.0.0.192 Prn Name:PXR8A97CA Going Off-Line Please DO NOT REPLY to this message. Perform the a ...

  • Avery 7411 - page 37

    SNMP IP Traps 1. From the Alerts and Tr aps screen, click SNMP IP Tr aps . 2. Enter a commu nity name , IP addre ss, and the errors you want to rec eive notificat ion for. You c an enter u p to eigh t IP addre sses. 3. Click Submit . 4. Click the rese t link at t he bottom o f the screen . The Reset Serve r screen appears. 5. Click Submit a nd wait ...

  • Avery 7411 - page 38

    SNMP Netware Traps 1. From the Alerts and Tr aps screen, click SNMP Netware Traps . 2. Enter a commu nity name, I PX address, IPX Node address , and the e rrors you want to receiv e notification fo r. You can enter up to four IPX addresses. 3. Click Submit . 4. Click the rese t link at t he bottom o f the screen . The Reset Serve r screen appears. ...

  • Avery 7411 - page 39

    Changing the Passwords 1. You can chan ge the net work access pas sword, ne twork update password, configure ne twork security , IP access, or prot ocol, print a test page, access the console, or update fi rmware from the Web Admin Configurat ion screen. 2. From the sid e menu, click Admin. T he Web Admin Configur ation screen appears. 3. Select wh ...

  • Avery 7411 - page 40

    Setting the Network Card Access Password When set, th e network card access pas sword allows you to view the Web interface an d the remote console. The defaul t is access . The passw ord is case-sens itive and stored in the pr inter’s flash memory. Make a not e of the password if you change it. Changing the pas sword also restricts access to Teln ...

  • Avery 7411 - page 41

    Setting the Network Ca rd Update Password When set, th e network card upd ate password allows you to cha nge variables in the Web inter face and the remote con sole. 1. From the side menu, click Admin . T he Web Admin Configur ation screen appears. 2. Click Configure Net work Card Update Password. 3. Enter a new network update pass word. 4. Retype ...

  • Avery 7411 - page 42

    Configuring Network Protocols 1. Only configure the sett ings required for your network/prin ter. To enable or disable protoco ls: 2. From the sid e menu, click Admin. T he Web Admin Configur ation screen appears. 3. Click Protocol Cont rol. 4. Check or uncheck the ne twork and IP protocols to enable or disabl e the necessary pr otocols. Note : If ...

  • Avery 7411 - page 43

    Controlling IP Access 1. You can limit which remot e hosts are able to access the print er by setting up an IP address range. 2. From the sid e menu, click Admin. T he Web Admin Configur ation screen appears. 3. Click Configure I P Access Control. To Add Hosts: 1. Enter a range of re mote IP address es that are allowe d access to the printer. An y ...

  • Avery 7411 - page 44

    To Remove Hosts 1. Select a rang e from the drop-do wn menu. 2. Click Remove . 3. Click the rese t link at t he bottom o f the screen . The Reset Serve r screen appears. 4. Click Submit a nd wait fi ve seconds f or the printe r to reset. Even thou gh you submitte d your changes on the previous screen, they d o not take effect until you rese t the p ...

  • Avery 7411 - page 45

    2. Click Configure Net work Security. 3. Assign the necessary sec urity settings for your network. 4. Click Submit . 5. Click the rese t link at t he bottom o f the screen . The Reset Serve r screen appears. 6. Click Submit a nd wait fi ve seconds f or the printe r to reset. Even thou gh you submitte d your changes on the previous screen, they d o ...

  • Avery 7411 - page 46

    Printing a Test Page 1. You can use th e Web interface to sen d a test page to the printer . 2. From the side menu, click Admin . T he Web Admin Configur ation screen appears. 3. Click Print Test Page . Using the Console The Custo m Commands menu allow s you to enter T elnet console commands. 1. From the side menu, click Admin . The Web Admin Confi ...

  • Avery 7411 - page 47

    Updating Firmware You can upda te the printer’s firmware. Make sure th e Resident (Boot Loader) is versio n 2.3 or greater. 1. From the side menu, click Admin . T he Web Admin Configur ation screen appears. 2. Click Update Firmwa re. 3. The printe r should be conne cted and ready to rece ive data. 4. Type the TFTP Serve r IP address. 5. Type the ...

  • Avery 7411 - page 48

    Basic Security Configurations There are t wo main decisi ons to be made when choosing wireless securit y: encryptio n method and au thentication protocol. The encryption method determines th e algori thm used t o encrypt the message. The authen tication type speci fies how users are identi fied and ve rified on a n etwork. Is the device seeking con ...

  • Avery 7411 - page 49

    Authentication Pr otocol Type RADIUS Server Protocol User ID & Password Certificat e Private Key Info File LEAP No N/A PEAP* N/A TLS Required* TTLS Optional* N/A Enterprise EAP- FAST PAP or MSCHAPv2 Required PAC* N/A Personal PSK N/A *PEAP This is only for server-side certificates. *Optional Leaving the Certificate Root Key and the Certificate ...

  • Avery 7411 - page 50

    See the follow ing table of accep table combinations: Encryption Authentication WEP WPA, WPA (TKIP) , WPA2 Open Shared Static No PSK LEAP PEAP EAP-FAST TLS* TTLS Dynamic Yes * Load the local key bef ore enabling TLS. 4-26 Ethernet Operating Instructions ...

  • Avery 7411 - page 51

    5 TROUBLESHOOTING Verify that th e printer is o perating prop erly: 1. Is the printer on line and does it ha ve supplies? 2. If the printer is work ing correctly, test the connection bet ween the printer and the print se rver by pushing the test bu tton on the back of the prin ter for less than five seconds. 3. If the tes t page does not print, t r ...

  • Avery 7411 - page 52

    If the print server is operating pr operly, all three LE Ds blink momentarily, th en indicate the foll owing activi ty: LED Indic ators Status solid printer is on blinking error Orange off printer is off solid Ethernet link (wired 10base T) blinking network activity Yellow off no Ethernet connection solid Ethernet link (wired 100b aseTX) blinking n ...

  • Avery 7411 - page 53

    5. On the test label, verify your IP and WiFi set tings. If using an Ethernet cable, the “Wired/Wirele ss:” value should be “WIRED”. If using RF, the setting should be “WIRELESS”. Check the “Actual SSID ” and the “WiFi Sig Qu al”. Is the actual SSID correct? Is the signal quality gr eater than zero? If the signal qu ality is 0, ...

  • Avery 7411 - page 54

    If the con nection succ eeds, press Ctrl-E on your keyboard. This sends an ENQ request. The prin ter respond s with three cha racters. Depending upon the Telnet being used, you may not see the first character, as it is a hex 05 val ue. The ot her two ch aracters are ASCII characters. You see A@ which means the printe r is online and waiting. Altern ...

  • Avery 7411 - page 55

    Troubleshooting Wireless Configuration Problems 1. Yo ur computer’s wireless adapte r and/or acces s point sho uld be configured to ma tch your print server. 2. The print server should be in range of the printer (90 meter s or 300 feet) and your PC and away f rom metal obj ects and other devic es with radio signals (Bluetoot h®, 2.4 GHz cordless ...

  • Avery 7411 - page 56

    Troubleshooting Netw ork Configuration ♦ ♦ If you are using T CP/IP, your compute r and the print server shoul d be on the same IP s egment or can reach eac h other with a PI NG command fro m the host. The IP add ress you assign to the print server mus t be on the same logical net work as your host computers . If your print server is set to Aut ...

  • Avery 7411 - page 57

    6 TELNET CONSOLE COMMANDS Use this chapter to configure the print server using Telnet. You must have a basic understa nding of Telnet commands. For initial setup, do not use Telnet. Use Auto-discover mode . Once you have the IP address, you can use Telnet or a Web brows er. You can use Telne t if you do not have acc ess to the Monarc h® NetMana ge ...

  • Avery 7411 - page 58

    5. T o view the c urrent wireless se ttings, t ype sh en (show wireless settings) or sh nw (show network sett ings) and press Enter : WiFi Mode = INFRAS TRUCTURE WiFi SSI D: ABC1 234 Speed = 54 Internationa l Roaming: Flexibl e Dynamic Freq uency Selecti on: Unsupported Regulato ry Domain = USI WiFi FW Ver = 2.13.10 .0 LMAC, 2.12.18.0 UMAC AP densi ...

  • Avery 7411 - page 59

    Help Commands For help at any time, t ype “Help” and a list of a vailable co mmands appea rs. The Help command builds on itself, because for each comm and you type, more details appea r for each option. Syntax: Help set DEFAULT Set paramete rs to factory defaults EN Network Para meters LOAd Firmware updat e parameters PAssword <passw ord> ...

  • Avery 7411 - page 60

    Syntax: Help set ip IP LPD/TCP Para meters ADdress aa.bb. cc.dd IP node address ARP [EN/DI] IP set via ARP BAnner [ EN/DI] LPD bann er prin ting CHKSUM [ EN/DI] IP recei ve checks um BOot n Number of DHCP/BOOTP tries ENable/DISab le Enable or Disable IP Pr ocessing FTIme [ EN/DI] Fast tim eout FTP [ EN/DI] FTP prot ocol HTTP [ EN/DI] HTTP pro tocol ...

  • Avery 7411 - page 61

    General Commands From the list of comman ds, the brackets - [] indicate to pick on e of the options listed, the ite ms inside curly brac es - { } are optional and do not need to be speci fied. CHange Changes configuration items. CLear FATal Deletes fa tal error log. CLear POrt portname JOB Clears current entry in the print server's in ternal q ...

  • Avery 7411 - page 62

    SET DEFAULT Sets prin t ser ver to factory de faults . SET LOAD [E N/DI] Enables or d isables firmware reload a fter exit. SET LOAD HO st <name> Sets node name of boot host (NetWare firmware load). SET LOAD IP aa.bb.cc.dd Sets IP address of load host (TCP/IP firmware load). SET LOAD SO ftware <file name> Sets print server’s firmware f ...

  • Avery 7411 - page 63

    SHow LOAd Shows the prin t server’s firmware update parame ters. SHow PORt < name> STA Shows the current por t status. SHow SERVEr Shows the server parameters. SHow SERVEr COu nters Shows the server statis tics. SHow SERVEr QUe ue Shows the print server internal queue. SHow TEstpage Prints a test page. SHow VErsion Shows the server firmware ...

  • Avery 7411 - page 64

    802.11b/g Wireless Commands In the following co mmands, EN and NW (network settings) are intercha ngeable. CLear EN SS id Clears the SSID, so the server connects to any access point. SET EN Sets 80 2.11b/g Wir eless Se ttings. SET EN APDEN [LO W/MED/HI] Sets 802.11b/g access point density. SET EN AUTHtype [OPEN/SHARED/ TTLS/LEAP/PEAP /WPA-PSK] Sets ...

  • Avery 7411 - page 65

    SET EN INAP [PAP/MSCHAP _V2] Sets the EA P inner authenti cation prot ocol. SET EN IROAM [DI Sable/STRICT/ FLEXible] Controls whether the radio frequencies ar e set based on the radio conf iguration or from its access po int. Disabled uses the radio defaults. When in Ad-Hoc mode, you must set the region of ope ration. See “ SET EN RE GDOMain ”. ...

  • Avery 7411 - page 66

    SET EN REGD OMain <count rycode> Sets the region of operation for the prin t server us ing the following table. The list of supported coun tries varies based on the radio type (802 .11b or 802 .11b/g). Country Code Description Country Code Description AL ALBANIA LV LATV IA DZ ALGERIA LB LEBANON AR ARGENTINA LI LIECHTENSTEIN AM ARMENIA LT LITH ...

  • Avery 7411 - page 67

    Country Code Description Country Code Description DK DENMARK PR PUERTO RICO DO DOMINICAN REPUBLIC Q A QATAR EC ECUADOR RO ROMANIA EG EGYPT RU RUSSIAN FEDERATION SV EL SALVA DOR SA SAUDI ARABIA EE ESTONIA SG SINGAPORE FI FINLAND SK SLOVAKIA FR FRANCE SI SLO VENIA GE GEORGI A ZA SOU TH AFRICA DE GERMANY ES SPAIN GR GREECE LK SRI LANKA GT GUATEMALA SE ...

  • Avery 7411 - page 68

    SET EN SPeed <1/ 2/5.5/6/9/11/ 12/18/24/48/54 > Sets 802.11b/g wireless speed in me gabits per second (Mpbs). SET EN SSID “<ssid>” Sets 802 .11b/g w ireless SSID. Use quotes if there is a space in SSID . This is case sensitive. SH EN STATS Shows the network I/O statistics . SET EN WEP [DI/6 4/128] Sets wired eq uivalent privacy e nc ...

  • Avery 7411 - page 69

    TCP/IP Commands SET IP [EN/ DI] Selects whether to use IP-based protocols. SET IP ACce ss [EN/DI/AL L] aa.bb.cc.dd [Mas k ee.ff.gg.h h] Allows or prevents specified IP a ddress from accessing print server. SET IP ADdr ess Sets IP address of print s erver. SET IP ARP [EN/D I] Selects whether to use an IP address with an ARP packe t. SET IP BANN ER [ ...

  • Avery 7411 - page 70

    SET IP PRObe [EN /DI] Enables or d isables the TCP connection probe. SET IP RArp nn 0 Both 1 no subnet 2 no router 3 neither Default ( 0) - IP ad dress is s et with subnet mas k and router that is the sa me address as host. SET IP RANGE [EN /DI/ALL] Sets the va lid range of IP a ddresses. SET IP REtry [EN /DI] Enables or d isables LPD retry continu ...

  • Avery 7411 - page 71

    SNMP Co mmands CLear SNMP CONt act <string> Removes SNMP SysCon tact. CLear SNMP LOCation <st ring> Removes SNMP SysLocation. SET SNMP GET COMM <string > Gets SN MP communit y. SET SNMP SE TCOMM1 <stri ng> or SET SNM P SETCOMM2 <string> Set SNMP community 1 or communit y 2 name. Note: An incoming se t request can use e ...

  • Avery 7411 - page 72

    6-16 Ethernet Operating Instructions ...

  • Avery 7411 - page 73

    A SPECIFICA TIONS Link Lay er: 80 2.3 or optional 802.11b/g Protocols: TCP/IP Passthru BOOTP DHCP RARP LPD/L PR Telnet RSH or RE MSH (rem ote shell ) FTP SNMP NetWare HP Jet Admin 802.3 Specifications Communicatio n Rate: 10 Mbps or 100 Mbps Optional 802.11b/ g Specificatio ns Frequen cy: 2.4 GHz range, d irect sequence Communication Rate: 1, 2, 5. ...

  • Avery 7411 - page 74

    Options Wireless 802. 11b/g communic ations are available. However, c heck with International Sales for an approved lis t of countries o r regions where these devices can be us ed. A-2 Ethernet Operating Instruction s ...

  • Avery 7411 - page 75

    G GLOSSAR Y Absolute Pa thname The full path of a file, including the co mputer system and any directories or subdirectories. For exa mple, c:prog ram fil esmonarc h softw arempcl toolbox9855.phu Access Point An interface between a wireless ne twork and a wired network. Acces s points can be used with Ethernet or other communica tions to enable ...

  • Avery 7411 - page 76

    Channel or RF Channel You can select w hich channel your ne twork devices use to communicate. All devi ces must be on the same channel to communicate in Ad-Hoc mode. Other radio devices such as Bluet ooth® wireles s devices, m icrowav e ovens, o r 2.4- GHz cordless phones ma y operate/interfere i f they are on the same channel as yo ur network. DH ...

  • Avery 7411 - page 77

    LPD/LPR A print er prot ocol t hat uses T CP/IP to establi sh connections between prin ters on a network. Also known as Line Prin ter Daemon/Line Printer Remo te. MAC A ddress or Media A ccess Control A hardware address (6-byte) that uniquely identifies e ach node of a netw ork. The MAC address is se t during manufacturing and doe s not change. Als ...

  • Avery 7411 - page 78

    PSK (Pre-Shared Key ) Authentication mode of WPA used in SOHO en vironments. The key valu e (or pass-phrase) is used for network authenticatio n only (not data encryption). It does n ot use a RADIUS server like the other mode s, but uses a shared key to provide the initial authenti cation with the access point or host. RADIUS (Remote Authentication ...

  • Avery 7411 - page 79

    SSID or Service Se t Identifier A unique iden tifier that must match for all nodes o n a subnetwork to communicate w ith each other. It consists of up to 32 cha racters (any pr intable char acter , incl uding spaces). If using the space ch aracte r, it must be enclosed in quotation marks . It is case-sensi tive. Static Method One of the a vailable ...

  • Avery 7411 - page 80

    WEP or Wired Equivalent Privacy A security protocol for wireless local area networks. WEP was designed to provide the same level o f security as that of a wired ne twork, which is inheren tly more secure than a wireless netw ork because wired networks are easily prote cted aga inst un author ized ac cess. Wir eless ne twork s use radio waves to com ...

  • Avery 7411 - page 81

    INDEX A alerts network 3-11, 3-13, 3-14 authentic ation EAP-FAST 3-28 LEAP 3-28 PEAP 3-28 PSK 3-28 TLS 3-28 TTLS 3-28 authentica tion type 3-28 C command console 5-1 general 5-5 help 5-3 SNMP 5-15 TCPIP 5-13 Telnet 5- 1 wireless 5-8 configurat ion label 1-6 console commands 5-1 E EAP-FAST authentica tion 3-28 F firmware update 3-25 G general comman ...

  • Avery 7411 - page 82

    S security 3-22 settings 3-22 server settings 3-3, 3-4, 3-5, 3-6, 3-8, 3- 19, 3-20 setting password 3-16, 3-17, 3-18 settings printer 3-3 , 3-4, 3-5, 3-6 , 3-8, 3-19, 3-20 security 3-22 server 3-3, 3-4 , 3-5, 3-6, 3-8 , 3-19, 3-20 SNMP 3-14, 3-15 TCPIP 3-7 wireless 3-10 setup network 3-11, 3-14, 3-15 printer 3-3 , 3-4, 3-5, 3-6 , 3-8, 3-19, 3-20 wi ...

  • Avery 7411 - page 83

    ...

  • Avery 7411 - page 84

    V isit for sales, service, supplies, information, and telephone numbers for our locations throughout the world. www .monarch.com T OLL FREE: 1-800-543-6650 (In the U.S.A.) 1-800-387-4740 (In Canada) ...

Fabricante Avery Categoría Printer

Los documentos del dispositivo Avery 7411 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Avery
- manuales de instrucciones 7411
- hojas de producto Avery
- folletos informativos
- o etiquetas energéticas Avery 7411
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Avery 7411.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Avery 7411, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Avery 7411. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Avery 7411.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Avery 7411, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Avery 7411. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Avery 7411.

El manual de instrucciones completo de Avery debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Avery 7411 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Avery 7411, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Avery 7411 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Avery 7411 - que deben facilitarnos los primeros pasos durante el uso de Avery 7411
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Avery 7411
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Avery 7411 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Avery 7411?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Avery 7411, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Avery 7411 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)