-
Miller Electric Elitet - page 1
® Auto-Darkening Helmets Models: XLi, XLix and Elite t OM-217 741C May 2006 XLi XLix Elite T o help us serve you better , go to w ww .MillerW elds.Com/HelmetReg/ ...
-
Miller Electric Elitet - page 2
T ABLE OF CONTENTS SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING 1 . . . . . . . . . . . . . . . SECTION 2 − SPECIFICA TIONS 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SECTION 3 − OPERA TION INSTRUCTIONS 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SECTION 4 − ...
-
Miller Electric Elitet - page 3
Page 1 SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING W arning! W atch Out! There are possible hazards as shown in the adjoining symbols. D Read and follow Section 1 for all safety symbols. ARC RA YS can burn eyes and skin. Arc rays from the welding process produce intense visible and invisible (ultravio- let and infrared) rays that can bur ...
-
Miller Electric Elitet - page 4
Page 2 SECTION 2 − SPECIFICA TIONS V iewing Field (XLi, Xlix) 97mm x 47mm/3.81” x 1.85” Viewing Field (Elite) 97mm x 60mm/3.81” x 2.62” Reaction Time (XLi) 0.0000555sec (1/18,000) Reaction Time (Xlix, Elite) 0.0000500sec (1/20,000) Available Shades Darkened State: No. 9 − No. 13 / Light State: No. 4 provides continuous UV and IR protect ...
-
Miller Electric Elitet - page 5
Page 3 SECTION 3 − OPERA TION INSTRUCTIONS Auto-Darkening Lens Controls . T wo different lens assemblies are shown. Refer to the illustra- tion that matches the lens on your helmet. Auto-On Lens Assembly 1 Reset/Auto-On Button 2 V ariable Shade Control 3 Sensitivity/Grind Mode Control 4 Lens Delay Control 5 Low Battery Indicator Manual-On Lens As ...
-
Miller Electric Elitet - page 6
Page 4 Reset/Auto-On Button (Auto − On Lens Assembly) Press the Reset button to check lens operation. If working properly , the lens will automatically darken twice and then return to the light state. . The lens will Auto Off (light state − No. 4) 15 − 20 minutes after the last arc. It is not necessary to press the Reset button to resume weld ...
-
Miller Electric Elitet - page 7
Page 5 Sensitivity/Grind Mode Control (Auto-On Lens Assembly) Sensitivity Control (Manual-On Lens Assembly) The sensitivity control is used to make the lens more responsive to differing light levels experienced in various welding processes. W e recommend a Mid-Range o r 30 − 50% sensitivity setting for most applications. S e e Ad- justing Sensiti ...
-
Miller Electric Elitet - page 8
Page 6 Lens Delay Control Th e lens delay control is used to slow the lens-switching time to the clear state after welding. The delay is particularly useful in eliminating bright after-rays present in higher amperage applications where the molten puddle re- mains bright momentarily after welding. Adjusts from 0.10 second (Min) to 1.0 sec- ond (Max) ...
-
Miller Electric Elitet - page 9
Page 7 Adjusting Headgear XLi Models . There are four headgear ad- justments: headgear top, tight- ness, angle adjustment, and distance adjustment. 1 Headgear T op Adjusts headgear for proper depth on the head to ensure correct bal- ance and stability . 2 Headgear T ightness T o adjust, push in the adjusting knob located on the back of the headgear ...
-
Miller Electric Elitet - page 10
Page 8 Adjusting Headgear (Continued) Xlix and Elite Models − . There are four headgear adjust- ments: headgear top, tightness, angle adjustment, and distance adjustment. 1 Headgear T op Adjusts headgear for proper depth on the head to ensure correct bal- ance and stability . 2 Headgear T ightness T o adjust, push in the adjusting knob located on ...
-
Miller Electric Elitet - page 11
Page 9 Replacement of the Front and Inside Lens Covers Y W arning! Never use the auto-darkening lens without the inside and outside lens covers properly installed. W elding spatter will damage the auto-darkening lens and void the warranty . XLi – 1 Outside − Remove the outside lens cover frame by grasping the outside corners and pulling gently ...
-
Miller Electric Elitet - page 12
Page 10 SECTION 4 − BA TTER Y REPLACEMENT XLi and Xlix – Remove the battery by inserting a coin into the slot on the battery cover and turn to the left to release the cover . Replace with a CR2450 lithium type battery or equivalent, Miller Part No. 217043. ( Note: make certain that the positive, (+) side of the battery faces up when reinstallin ...
-
Miller Electric Elitet - page 13
Page 1 1 SECTION 5 − MAINTENANCE Cleaning The helmet requires little maintenance. However , for best performance we rec- ommend cleaning after use. Using a soft cloth dampened with a mild soap and water solution, wipe the cover lenses clean. Allow to air dry . Occasionally , the filter lens and sensors should be cleaned by gently wiping with a so ...
-
Miller Electric Elitet - page 14
Page 12 SECTION 7 − INST ALLING OPTIONAL MAGNIFYING LENS . T o prevent lens fogging, install flat side of magnifying lens toward auto-darkening lens. XLi – Magnifying lenses can be adapted to the XLi helmet as follows: 1 Pull outside lens cover/holder free from helmet. 2 Position magnifying lens over auto-darkening lens between the four center- ...
-
Miller Electric Elitet - page 15
Page 13 SECTION 8 − REPLACEMENT P ARTS XLi Series Item No. Description XLi Series 1 Helmet shell, Black 217 606 1 Helmet shell, American Eagle II 223 645 1 Helmet shell, Black Flame 217 604 1 Helmet shell, Red Flame 217 603 1 Helmet shell, Millermatic R 770 233 1 Helmet shell, Dale Earnhardt Sr . 770 253 1 Helmet shell, Dale Earnhardt Jr . 770 23 ...
-
Miller Electric Elitet - page 16
Page 14 Lense, 1.00 magnification (not shown) 212 236 Lense, 1.25 magnification (not shown) 212 237 Lense, 1.50 magnification (not shown) 212 238 Lense, 1.75 magnification (not shown) 212 239 Lense, 2.00 magnification (not shown) 212 240 Lense, 2.25 magnification (not shown) 212 241 Lense, 2.50 magnification (not shown) 212 242 * Kit includes front ...
-
Miller Electric Elitet - page 17
Page 15 XLix Series Item No. Description XLix Series 1 Helmet shell, Black 770 236 1 Helmet shell, American Eagle II 1 Helmet shell, Black Flame 1 Helmet shell, Red Flame 1 Helmet shell, Millermatic R 1 Helmet shell, Dale Earnhardt Sr . 1 Helmet shell, Dale Earnhardt Jr . 1 Helmet shell, Jeff Gordon 1 Helmet shell, Maple Leaf 223 458 1 Helmet shell ...
-
Miller Electric Elitet - page 18
Page 16 Lense, 0.75 magnification (not shown) 212 235 Lense, 1.00 magnification (not shown) 212 236 Lense, 1.25 magnification (not shown) 212 237 Lense, 1.50 magnification (not shown) 212 238 Lense, 1.75 magnification (not shown) 212 239 Lense, 2.00 magnification (not shown) 212 240 Lense, 2.25 magnification (not shown) 212 241 Lense, 2.50 magnific ...
-
Miller Electric Elitet - page 19
Page 17 Elite Series Item No. Description Elite Series 1 Helmet shell, Black 216 331 1 Helmet shell, American Eagle II 1 Helmet shell, Black Flame 217 602 1 Helmet shell, Red Flame 216 332 1 Helmet shell, Camouflage 227 190 1 Helmet shell, Mexican Flag 229 587 1 Helmet shell, The Joker 227 189 1 Helmet shell, UA-Series 1 229 366 1 Helmet shell, Map ...
-
Miller Electric Elitet - page 20
Page 18 Lense, 0.75 magnification (not shown) 212 235 Lense, 1.00 magnification (not shown) 212 236 Lense, 1.25 magnification (not shown) 212 237 Lense, 1.50 magnification (not shown) 212 238 Lense, 1.75 magnification (not shown) 212 239 Lense, 2.00 magnification (not shown) 212 240 Lense, 2.25 magnification (not shown) 212 241 Lense, 2.50 magnific ...
-
Miller Electric Elitet - page 21
Page 19 SECTION 9 − LIMITED W ARRANTY Effective January 1, 2006 LIMITED W ARRANTY – Subject to the terms and conditions below . Miller Electric Mfg. Co., Appleton, Wisconsin, warrants to its original retail pur- chaser that the new Miller equipment sold after the effective date of this limited wa rranty is free of defects in material and workma ...
-
Miller Electric Elitet - page 22
Page 20 NOTES ...
-
Miller Electric Elitet - page 23
...
-
Miller Electric Elitet - page 24
PRINTED IN USA © 2006 Miller Electric Mfg. Co. V isit our website at www.MillerWelds.com ® Miller Elect ric Mfg. Co. An Ill inois T ool Works Company 1635 West S pencer S treet Applet on, WI 5 4914 US A ...
¿Tienes una pregunta acerca de Miller Electric Elitet?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Miller Electric Elitet, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Miller Electric Elitet probablemente compartirá una forma de solucionarlo.