-
Weslo wctl19106.0 - page 1
USER'S MANUAL Serial Number Decal Model No. WCTL19106.0 S erial No. QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, please con - tact our customer service depart - ment directly. 1-888-936-4266 Mon.–Fri. 8h00 until 17h00 EST (excluding ho ...
-
Weslo wctl19106.0 - page 2
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . ...
-
Weslo wctl19106.0 - page 3
15. Read, understand, and test the emergency s top procedure before using the treadmill (see T READMILL OPERATION). 1 6. Never start the treadmill while you are stand- ing on the walking belt. Always hold the handrails while using the treadmill. 17. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps ...
-
Weslo wctl19106.0 - page 4
Thank you for selecting the WESLO ® CADENCE G-25 treadmill. The CADENCE G-25 treadmill combines ad- vanced technology with innovative design to let you enjoy an exc ellen t form o f cardiovascular exercise in t he convenience and privacy of y our h ome. And when you’re not exercising, the unique CADEN CE G- 25 can be folded up, requiring less th ...
-
Weslo wctl19106.0 - page 5
ASSEMBL Y T o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Do not remove th e long plastic tape is inside the Right Handrail unti ...
-
Weslo wctl19106.0 - page 6
5. Hold the Console Base (1) near the Right Handrail (6). Touch the Right Handrail to discharge any static. Insert the end of the Wire Harness (22) through the three looped plastic ties. Press the end of the Wire Harness into the connector on the back of the Console Base (1) in the location shown. The connectors should slide to- gether easily and s ...
-
Weslo wctl19106.0 - page 7
7 9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet, place a mat under the treadmill. 8. Raise the Frame to the vertical position (55). Make sure that the Latch Pin (69) i ...
-
Weslo wctl19106.0 - page 8
8 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER COR ...
-
Weslo wctl19106.0 - page 9
DIAGRAM OF THE CONSOLE ETWL19105 Clip Key Note: If there is a sheet of clear plastic on the console, remove the plastic. 9 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in (see page 8). In addition, locate the reset/off circuit breaker on the treadmill near the power cord, and make su ...
-
Weslo wctl19106.0 - page 10
To stop the walking belt, press the Stop button. Note: If the time mode is displayed (see step 3 b elow), the time will begin to flash. Note: The first time the treadmill is used, observe the alignment of the walking belt, and center the walking belt if necessary (see page 13). Follow your progress with the display. As you exercise, the console can ...
-
Weslo wctl19106.0 - page 11
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the t readmill. 1. Hold the treadmill with your hands in the locations shown at the right. CAUTION: To decrease the possibility of in- jury, bend your legs and keep your ...
-
Weslo wctl19106.0 - page 12
MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and th ...
-
Weslo wctl19106.0 - page 13
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE P OWER CORD . Using the allen wrench, t ...
-
Weslo wctl19106.0 - page 14
CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the ...
-
Weslo wctl19106.0 - page 15
EXERCISE FREQUENCY T o maintain or improve your condition, complete three workouts each week, with at least one day of rest be- tween workouts. After a few months, you may com- plete up to five workouts each week if desired. The key t o success is to make exercise a regular and enjoyable part of your everyday life. SUGGESTED STRETCHES The correct f ...
-
Weslo wctl19106.0 - page 16
P ART LIST—Model No. WCTL19106.0 R1006A Key No. Qty. Description 1 1 Console 2 2 Handrail Endcap 3 1 Key/Clip 4 1 Console Back 5 6 Ground Screw 6 1 Right Handrail 7 1 Left Handrail 8 2 Rear Foot 9 1 Motor Tension Bolt 10 2 Frame Bolt 11 2 Handrail Washer 12 4 Handrail Bolt 13 2 Frame Spacer 14 2 Wheel Bolt 15 2 Wheel 16 2 Base Cap 17 7 Nut 18 1 B ...
-
Weslo wctl19106.0 - page 17
Star W asher (33)–2 Nut (17)–6 Handrail W asher (1 1)–2 Formed W asher (31)–4 Handrail Bolt (12)–4 Frame Bolt (10)–2 Wheel Bolt (14)–2 Latch Screw (70)–3 Console Screw (58)–8 Remove this chart and use it to identify small parts during assembly . Save this chart and the EXPLODED DRA WING/P ART LIST for future reference. P ART IDENT ...
-
Weslo wctl19106.0 - page 18
65 8 63 69 41 27 70 29 24 66 51 67 51 66 67 24 61 5 60 57 55 52 56 52 52 54 37 26 49 28 53 50 46 24 48 28 27 24 25 1 3 6 14 15 17 71 1 1 10 16 17 15 14 19 42 17 23 24 26 30 44 62 47 20 20 31 21 9 40 39 38 36 32 5 43 45 13 10 1 1 13 7 17 31 33 33 68 68 22 16 12 12 22 19 42 42 19 42 19 42 18 2 58 2 58 5 35 4 58 58 58 64 8 64 63 34 34 72 17 5 42 19 19 ...
-
Weslo wctl19106.0 - page 19
Part No. 245129 R1006A Printed in CANADA © 2006 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give the following information: • the MODEL NUMBER of the product (WCTL19106.0) • the NAME of the product (WESLO ® CADENCE G-25 treadmill) • th ...
¿Tienes una pregunta acerca de Weslo wctl19106.0?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Weslo wctl19106.0, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Weslo wctl19106.0 probablemente compartirá una forma de solucionarlo.