Español dropdown-ico

Manual de instrucciones Fujitsu BX600

289 de páginas 2.92 mb
Descargar

Pasar a la página of 289

Summary
  • Fujitsu BX600 - page 1

    PRIMERGY BX600 Blade Server Systems Intelligent Bl ade Panel Modu le 30/12 User Interface Description Engli sh ...

  • Fujitsu BX600 - page 2

    Editio n Mar c h 2 0 08 PRIMERG Y BX60 0 Blade S er v er S ystems Int elligent Blade P anel Module 30/1 2 ...

  • Fujitsu BX600 - page 3

    Comments … Suggestions … Corrections … The Us er Docume ntation Department woul d lik e to kno w y our opini on on thi s manual. Y our feedb ack help s us to optim ize our docu mentatio n to suit y our i ndividu al need s. F eel free to send us y our comment s b y e-mail to : manu als@fuj tsu-siem ens.c om Certifi ed documen tation according ...

  • Fujitsu BX600 - page 4

    Intelligent Blade Panel Module 3 Important Not es Introduction Networking Planning Making N etwork Conn ection Configuration the IBP Web Base Command Interface Command Reference Using SNMP System Defaulting T roubleshooting and T ip s ...

  • Fujitsu BX600 - page 5

    Intelligent Blade Panel Module 4 CONTENTS 1 Important Notes ........................................................................................................... 8 1.1 Information About Boards ..................................................................................... 8 1.2 Compliance S t atements.................................... ...

  • Fujitsu BX600 - page 6

    Intelligent Blade Panel Module 5 6.2.4 Extended Configuration Menu ..................................................................... 100 7 Command Reference .............................................................................................. 131 7.1 CLI Command Format ................................................................... ...

  • Fujitsu BX600 - page 7

    Intelligent Blade Panel Module 6 7.6.1 Show Commands ........................................................................................ 208 7.6.2 show logging buffered ................................................................................. 208 7.6.3 show logging traplog................................................................ ...

  • Fujitsu BX600 - page 8

    Intelligent Blade Panel Module 7 7.1 1.15 quit ............................................................................................................... 272 7.12 DHCP Commands ............................................................................................ 273 7.12.1 ip dhcp restart ................................................ ...

  • Fujitsu BX600 - page 9

    Information About Boards Important Notes Intelligent Blade Panel Module 8 1 Important Notes Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it. Be sure to read this page carefully and note the information before you open the device. You cannot access the IBP Module without first ...

  • Fujitsu BX600 - page 10

    C o m p l i a n c e S t a t e m e n t s Introduction Intelligent Blade Panel Module 9 ! 1.2 Compliance Statements FCC Class A Compliance This equipment has been tested and found to comply with the limits for a “Class A” digital device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference-Causing Equipment ...

  • Fujitsu BX600 - page 11

    C o m p l i a n c e S t a t e m e n t s Introduction Intelligent Blade Panel Module 10 ! Japan VCCI Class A CE Mark Declaration of Conformance for EMI and Safety (EEC) This inf or mation technology equipment compl ies wit h the requirements of the Council Directive 89/336/EEC on the Appro ximation of the laws of the Member States relating to Electr ...

  • Fujitsu BX600 - page 12

    C o m p l i a n c e S t a t e m e n t s Introduction Intelligent Blade Panel Module 11 Ta i w a n BSM I Class A Au s t r a l i a AS/NZ S 3548 (1995) - Clas s A ...

  • Fujitsu BX600 - page 13

    Features of the IBP Module Introduction Intelligent Blade Panel Module 12 2 Introduction The PRIMERGY BX600 Blade Server system is a modular server system that can integrates up to 10 server modules, four IBP Modules (one IBP will be included in the base enclosure, the other three are optional) and two Management Modules (MMB). The IBP Module provi ...

  • Fujitsu BX600 - page 14

    Features of the IBP Module Introduction Intelligent Blade Panel Module 13 2.1 Features of the IBP Module The IBP provides a wide range of advanced performance-enhancing features. Multicast filtering provides support for real-time network application s. Flow control eliminates the loss of packets due to bottlenecks caused by port saturation. A nd br ...

  • Fujitsu BX600 - page 15

    Features of the IBP Module Introduction Intelligent Blade Panel Module 14 from incoming frames. These user-defined entries are not subject to aging, and are preserved across resets and reboots. Self-Learning MAC Addresses The IBP Module enables automatic MAC address learning from incoming packets. The MAC addresses are stored in the Bridging Table. ...

  • Fujitsu BX600 - page 16

    Features of the IBP Module Introduction Intelligent Blade Panel Module 15 Uplink Set Support Uplink Sets are used to define the external connection. An “ Uplink Set” is defined as a set of 1 to n external (uplink) ports, which is used in port group definitions to connect a group of server blades to the customer’s LAN. All members of a Uplink ...

  • Fujitsu BX600 - page 17

    Features of the IBP Module Introduction Intelligent Blade Panel Module 16 configures, binds and monitors the port binding to aggregators within the system. BootP and DHCP Clients DHCP enables additional setup parameters to be re ceived from a network server upon system startup. DHCP service is an on-going process. DHCP is an extension to BootP. For ...

  • Fujitsu BX600 - page 18

    Features of the IBP Module Introduction Intelligent Blade Panel Module 17 Provision The Intelligent Blade Panel allows users to select the Configuration files to configure the system. There are two timings to conf igure system: S t art-up and Run time. S t art-up: Select the Configuration File for start-up purpose. Run time: Users can choose a new ...

  • Fujitsu BX600 - page 19

    Features of the IBP Module Introduction Intelligent Blade Panel Module 18 reference clock. The higher the stratum (where zero is the highest), the more accurate the clock. 2.1.4 Security Feature SSL Secure Socket Layer (SSL) is an application-level protocol that enables secure transactions of data through privacy, authentication, and data integrity ...

  • Fujitsu BX600 - page 20

    System LED There is one IBP Module system LED with dual functions, controlled by MMB for error status reporting and blade identification. Different flashing frequencies are used to indicate the different functions. There are two functions, identification and error reporting, with identificat ion having a higher priority than error reporting. NOTE: ...

  • Fujitsu BX600 - page 21

    Features of the IBP Module Introduction Intelligent Blade Panel Module 20 can be automatically set if this feature is also supported b y the attached device. Otherwise, these items can be manually configured for any connection. Note – Auto-negotiation must be enabled for automatic MDI/MDI-X pin-out configuration. Internal Ports The IBP also inclu ...

  • Fujitsu BX600 - page 22

    Features of the IBP Module Introduction Intelligent Blade Panel Module 21 ...

  • Fujitsu BX600 - page 23

    Features of the IBP Module Introduction Intelligent Blade Panel Module 22 PRIMERGY GbE Switch Blade 30/12 Internal Ports List PRIMERGY BX620 S4 Nic No. I/O Switch Blade Module. Internal Ports Mapping PRIMERGY BX620 S4 Nic No. I/O Switch Blade Module. Internal Ports Mapping Blade No 1 Nic 1 Net 1 Port 1 Blade No 6 Nic 1 Net 1 Port 16 Blade No 1 Nic ...

  • Fujitsu BX600 - page 24

    Features of the IBP Module Introduction Intelligent Blade Panel Module 23 2.2.2 Status of LEDs The front panel contains light emitting diodes (L ED) that indicate the status of links, and IBP diagnostics. Port LEDs Each of uplink port has two LED indicat ors. One Gbe Port LED definition: LED Color Function Orange Port Link at 1000 Mbps Green Port L ...

  • Fujitsu BX600 - page 25

    Features of the IBP Module Introduction Intelligent Blade Panel Module 24 straight-through cab le (with auto-negotiation enabled) l A uto-negotiation enables each por t to automatically select the optim um speed (10, 100 or 1000 Mbps) and communication mode (half or full duple x) if this f eature is suppor ted by the attached device ; otherwise the ...

  • Fujitsu BX600 - page 26

    l T elnet, SNMP/RMON and Web- based interf ace l Multicast Switching based on IGMP (Inter net Group Management Protocol) Snooping and Multicast Filtering l Broadcast storm suppression l Link aggregaton l Management access sec ur ity provided wit h username/password, and SNMP community names Notational Con v en ti on s Introduction Intelligent Blade ...

  • Fujitsu BX600 - page 27

    Ta r g e t Group Introduction Intelligent Blade Panel Module 26 2.5 Ta r g e t Group This manual is intended fo r those responsible fo r installing and configuring network connections. This manual contains all the inf ormat ion required to configure the IBP. ...

  • Fujitsu BX600 - page 28

    T echnical Data Introduction Intelligent Blade Panel Module 27 2.6 T echnical Data Electrical data Operating voltage +12 VDC @ 3 A max Maxi mum current 11 A max @ 3.3 VDC National and international stan dards Product safe ty IEC 60950 / EN 60950 / UL 1950, CSA 22.2 N o . 950 Electromagnetic comp atib ilit y Interf erence emissio n Harmonic current ...

  • Fujitsu BX600 - page 29

    T echnical Data Introduction Intelligent Blade Panel Module 28 En viro nment al conditions Environment class 3K2 Environment cla ss 2K2 DIN IEC 721 part 3-3 DIN IEC 721 part 3-2 Temperatur e: – Operating (3K2) – Transport (2K2) 0 °C .... 50 °C -40 °C .... 70 °C Humidit y 10 ... 90% Condensation while operating mus t be av oided. ...

  • Fujitsu BX600 - page 30

    Introdu ction to I B P Network Planning Intelligent Blade Panel Module 29 3 Network Planning 3.1 Introduction to IBP The Intelligent Blade Panel M odule (IBP) provides a simple Ethernet interface option for connecting the PRIMERGY BX600 Blade Server systems to the network infrastructure. The administrative effort and network skills required to conn ...

  • Fujitsu BX600 - page 31

    The IBP connects server boards insta lled insid e the syst em to a common sw i tc h f abric, and also provides three ex ter nal por ts fo r uplinking to e xternal IEEE 802.3ab compliant dev ices. For most applications, the e xternal por ts on the IBP wil l be connected to other s witches in the network bac kbone. Connecting to 1000B ASE-T Devi ces ...

  • Fujitsu BX600 - page 32

    1000B AS E-T Cable Requirements Making Network Connections Intelligent Blade Panel Module 31 ! i Do not plug a phone jack connector into any RJ-45 por t. This may damage the IBP . Instead, use only twisted-pair cab les with RJ-45 connectors that conf orm with FCC standards. For 1000 Mbps operation, all f our wire pairs in the cab le must be connect ...

  • Fujitsu BX600 - page 33

    1000BASE-T Pin Assignments Making Network Connections Intelligent Blade Panel Module 32 4.2.2 Adjusting Existing C ategory 5 Cabling for 1000 B ASE-T If your exi st i n g Cat eg ory 5 installation does not meet one of the test parameters f or 1000BASE-T , there are basically three measures that can be applied to tr y and correct the problem : 1. Re ...

  • Fujitsu BX600 - page 34

    O v e r v i e w Configuration the IBP Module Intelligent Blade Panel Module 33 5 Configuration the IBP Module This section contains information about IBP unpacking, installation, and cable connections. 5.1 Overview The IBP Module is inserted in the PRIMERGY BX600 Blade Server which is a modular server system that can integrates up to 10 processor b ...

  • Fujitsu BX600 - page 35

    Connecting the IBP Module Configuration the IBP Module Intelligent Blade Panel Module 34 5.2 Connecting the IBP Module Before configuring the IBP Module, PRIMERGY BX600 Blade Server console port must be connected to the IBP Module. To connect PRIMERGY BX600 Blade Server console port to the IBP Module, perform the following: 1. Mount the IBP Module. ...

  • Fujitsu BX600 - page 36

    Connecting the IBP Module Configuration the IBP Module Intelligent Blade Panel Module 35 (5) Logout (6) Reboot Management Blade (7) System Information Dump Enter selection: 3 3. Select (3) Console Redirection. The Console Redirection T able is displayed. +-----------------------------------------------------------------------------+ | C o n s o l e ...

  • Fujitsu BX600 - page 37

    S t art up and Configuration the IBP Module Configuration the IBP Module Intelligent Blade Panel Module 36 5.3 Start up and Confi guration the IBP Module It’s important to understand the IBP Module arch itecture when configuring the IBP Module. The IBP Module has two types of ports. One type is for interfacing the IBP Module with P RIMERGY BX600 ...

  • Fujitsu BX600 - page 38

    C o n f i g u r i n g t h e T e r m i n a l Configuration the IBP Module Intelligent Blade Panel Module 37 5.4 Configuring the Terminal To configure the device, the station must be running terminal emulation software. Ensure that switch module is correctly mounted and is connected to the chassis serial port. Ensure that the terminal emulation softw ...

  • Fujitsu BX600 - page 39

    B o o t i n g D e v i c e Configuration the IBP Module Intelligent Blade Panel Module 38 2. Power up the Chassis and observe booting information (if Chassis is running press <Enter> few times to ensure that terminal connection is successful). 5.5 Booting Device • The device is delivered with a default configuration. • The device is not co ...

  • Fujitsu BX600 - page 40

    S o f t w a r e D o w n l o a d Configuration the IBP Module Intelligent Blade Panel Module 39 the device. If it is not the latest version, download and install the latest version. For more information on downloading the latest version see the "Software Download" 5.6 Software Download 5.6.1 In BootROM Back Door CLI Software Download Using ...

  • Fujitsu BX600 - page 41

    S o f t w a r e D o w n l o a d Configuration the IBP Module Intelligent Blade Panel Module 40 8. Enter the reset command. The following message is displayed: BootROM > r eset Are you sur e you want to rese t the system ( y/n)? y System Rese tting... 9. Enter y. The device reboots. 5.6.2 In Operation Code CLI Software Download Through TFTP Serve ...

  • Fujitsu BX600 - page 42

    S o f t w a r e D o w n l o a d Configuration the IBP Module Intelligent Blade Panel Module 41 file n ame file type startup siz e (b yte) ----------- ------------------ --- ---------- ---- ------- --- ---- ---- PRIMERGY BX600- b-0.4.1214.biz Boot-Rom image Y 1 18206 default. cfg Config File Y 1 7336 PRIMERGY BX600-r- c-0.5.0110.biz Operation Code Y ...

  • Fujitsu BX600 - page 43

    S o f t w a r e D o w n l o a d Configuration the IBP Module Intelligent Blade Panel Module 42 (vty-0) #re load Are you sur e you would like t o reset the sy stem? (y/n) y System will now restart! 9. Enter y. The device reboots. ...

  • Fujitsu BX600 - page 44

    O v e r v i e w Web-Based Manag ement Interface Intelligent Blade Panel Module 43 6 Web-Based Management Interface 6.1 Overview The BX600 Network IBP module provides a built-in browser sof tware interface that lets you configure and manage it remotely using a standard W eb browser such as Microsoft Internet Explorer or Netscape Navigator . This sof ...

  • Fujitsu BX600 - page 45

    M a i n M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 44 6.2 Main Menu 6.2.1 Groups Administration 6.2.1.1 Managing Uplink Sets 6.2.1.1.1. Configuring Uplink Set Configuration Page An "Uplink Set" is defined as a set of 1 to n ex ternal (uplink) ports, which is be used in port group definitions to connect a group ...

  • Fujitsu BX600 - page 46

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 45 Submit – Update the IBP the values on this screen. If you want the IBP to ret ain the new values across a power cycle, you have to perform a save Delete – Delete the Uplink Set. Y ou are not allowed to delete the "default" uplink ...

  • Fujitsu BX600 - page 47

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 46 6.2.1.2 Managing Port Groups 6.2.1.2.1. Configuring Port Group Configuration Page The purpose of the port group configuration is to create port groups, and to modify the existing port groups. Only the int ernal ports could be defined to be the ...

  • Fujitsu BX600 - page 48

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 47 Command Buttons Submit – Update the IBP the values on this screen. If you want the IBP to retain the new values across a power cycle, you have to perform a save. Delete - Delete the port group. Y ou are not allowed to delete the "default ...

  • Fujitsu BX600 - page 49

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 48 6.2.1.2.2. Viewing Port Group Information Page This page displays the st atus of all currently configured port group. Non-Configurable Data Port Group Name – The group name of the port group. Internal Port s – List the internal port members ...

  • Fujitsu BX600 - page 50

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 49 6.2.1.3 Managing VLAN Port Groups 6.2.1.3.1. Configuring VLAN Port Group Configuration Page The purpose of the VLAN port group configuration is to create groups based on the VLAN basis, and to modify the existing group s. Only t he internal por ...

  • Fujitsu BX600 - page 51

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 50 6.2.1.3.2. Viewing VLAN Port Group Information Page This page displays the st atus of all currently configured VLAN port group. Non-Configurable Data ...

  • Fujitsu BX600 - page 52

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 51 VLAN Port Group Name – The group name of the VLAN port group. VLAN ID – The VLAN Identifier of the VLAN Port Group. Internal Port s – Internal interface, member of that VLAN Port Group. Uplink Set Name – The Uplink Set for the external ...

  • Fujitsu BX600 - page 53

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 52 6.2.1.4 Managing Service LAN Groups 6.2.1.4.1. Configuring Service LAN Configuration Page Selection Criteria Service LAN Name – Y ou can use this screen t o configure an existing Service LAN, or to create a new one. Use this pulldown menu to ...

  • Fujitsu BX600 - page 54

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 53 6.2.1.4.2. Viewing Service LAN Information Page This page displays the st atus of all currently configured Service LAN. Non-Configurable Data Service LAN Name – The group name of the Service LAN. ...

  • Fujitsu BX600 - page 55

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 54 Internal Port s – Internal interface, member of that Service LAN. Uplink Set Name – The Uplink Set for the external connect ion of that Service LAN. External Ports – External interface, member of the specified Uplink Set. ...

  • Fujitsu BX600 - page 56

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 55 6.2.1.5 Managing Service VLAN Groups 6.2.1.5.1. Configuring Service VLAN Configuration Page Selection Criteria Service VLAN Name - Y ou can use this screen to reconfigure an existing Service VLAN, or to create a new one. Use this pull down menu ...

  • Fujitsu BX600 - page 57

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 56 6.2.1.5.2. Viewing Service VLAN Information Page This page displays the st atus of all currently configured Service VLANs. Non-Configurable Data ...

  • Fujitsu BX600 - page 58

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 57 Service VLAN Name – The group name of the Service VLAN. Service VLAN ID –The VLAN Identifier of the Service VLAN. Internal Port s – Internal interface, member of that Service VLAN. Uplink Set Name – The Uplink Set for the external conne ...

  • Fujitsu BX600 - page 59

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 58 6.2.1.6 Managing Port Backup 6.2.1.6.1. Configuring Port Backup Configuration Page T wo link aggregation groups are associated with one uplin k set as the uplink set is created. T wo link aggregation groups are defined as active and backup port ...

  • Fujitsu BX600 - page 60

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 59 6.2.1.6.2. Viewing Port Backup S tatus Page The page displays the st atus of all currently configured port-backup. Non-Configurable Data Uplink Set Name – The name of the Uplink Set. External Active Ports – The configu red external active p ...

  • Fujitsu BX600 - page 61

    G r o u p s A d m i n i s t r a t i o n Web-Based Manag ement Interface Intelligent Blade Panel Module 60 ...

  • Fujitsu BX600 - page 62

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 61 6.2.2 Panel Settings Menu 6.2.2.1 Configuring Management Session and Network Parameters 6.2.2.1.1 View ing Inventory Information Use this panel to display the IBP's V ital Product Dat a, stored in non-volatile memory at the factory . Non-Configu ...

  • Fujitsu BX600 - page 63

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 62 ...

  • Fujitsu BX600 - page 64

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 63 6.2.2.1.2 Viewing Panel Description Page Configurable Data System Name - Enter the name you want to us e to identify this IBP module. Y ou may use up to 31 alpha-numeric characters. The factory default is blank. System Location - Enter the location o ...

  • Fujitsu BX600 - page 65

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 64 6.2.2.1.3 Configuring Inband Administration Page The network interface is the logical interface used for in-band connectivity with the IBP module via any of the IBP's front panel port s. The configuration p arameters associated with the IBP&apos ...

  • Fujitsu BX600 - page 66

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 65 management access. By setting the interface to be granted, IBP will be allowed to access from this interface; on the other hand, if the interface is set to be denied, IBP will n ot be allowed to access from this interface. Non-Configurable Data Burne ...

  • Fujitsu BX600 - page 67

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 66 6.2.2.1.4 Configuring T elnet Session Page Configurable Data T elnet Session Timeout (minutes) - S pecify how many minutes of inactivity should occur on a telnet session before the session is logged off. Y ou may enter any number from 1 to 160. The f ...

  • Fujitsu BX600 - page 68

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 67 6.2.2.1.5 Configuring Outbound T elnet Client Configuration Page Configurable Data Admin Mode - S pecifies if the Outbound T elnet service is Enabled or Disabled. Default value is Enabled. Maximum Sessions - S pecifies t he maximum number of Outbound ...

  • Fujitsu BX600 - page 69

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 68 6.2.2.1.6 Configuring Serial Port Page Configurable Data Serial Port Login Timeout (minutes) - S pecify how many minutes of inactivity should occur on a serial port connection before the IB P closes th e connection. Enter a number between 0 and 160: ...

  • Fujitsu BX600 - page 70

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 69 6.2.2.1.7 Defining User Account s Page By default, two user accounts exist: admin, with 'Read/Write' privileges guest, with 'Read Only' privileges By default, the passwor d for admin is “admin”, and p assword for guest is blan ...

  • Fujitsu BX600 - page 71

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 70 Command Buttons Submit - Update the IBP module with the values on this screen. If you want the IBP module to retain the new values across a power cycle, you must perform a save. Delete - Delete the currently selected user account. If you want the IBP ...

  • Fujitsu BX600 - page 72

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 71 6.2.2.1.8 Defining DHCP Client Configuring DHCP Rest art Page This command issues a BOOTP or DHCP client request for any IP interface that has been set to BOOTP or DHCP mode via the IP address command. DHCP requires the server to reassign the client& ...

  • Fujitsu BX600 - page 73

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 72 6.2.2.1.9 Defining SNMP Configuring SNMP Community Configuration Page By default, two SNMP Communities exist: private, with 'Read/Write' privileges and st atus set to enable public, with 'Read Only' privileges and st atus set to e ...

  • Fujitsu BX600 - page 74

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 73 new values across a power cycle, you must perform a save. Configuring SNMP T rap Receiver Configuration Page This menu will display an entry for every active T rap Receiver . Configurable Data SNMP Community Name - Enter the community string for the ...

  • Fujitsu BX600 - page 75

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 74 Viewing SNMP supported MIBs Page This is a list of all the MIBs supported by the IBP module. Non-configurable Dat a Name - The RFC number if applicable and the name of the MIB. Description - The RFC title or MIB description. Command Buttons Refresh - ...

  • Fujitsu BX600 - page 76

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 75 ...

  • Fujitsu BX600 - page 77

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 76 6.2.2.1.10 Configuring SNTP Configuring SNTP Global Configuration Page Configurable Data Client Mode - S pecifies the mode of operation of SNTP Client. An SNTP client may operate in one of the following modes. • Disable - SNTP is not operational. N ...

  • Fujitsu BX600 - page 78

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 77 Viewing SNTP Global St atus Page Non-Configurable Data V ersion - S pecifies the SNTP V ersion the client supports. Supported Mode - S pe cifies the SNTP modes the client supports. Multiple modes may be supported by a client. Last Up date T ime - S p ...

  • Fujitsu BX600 - page 79

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 78 Address T ype - S pecifies the addr ess type of the SNTP Server address for the last received valid packet. Server Stratum - S pecifies the claimed stratum of the server for the last received valid packet. Reference Clock Id - S pecifies the referenc ...

  • Fujitsu BX600 - page 80

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 79 Allowed types are : • Unknown • IPV4 Default value is Unknown Port - S pecifies the port on the server to which SNTP requests are to be sent. Allowed range is (1 to 65535). Default value is 123. Priority - S pecifies the priority of this server e ...

  • Fujitsu BX600 - page 81

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 80 Last Attempt Time - S pecifies the local date and time (UTC) that this SNTP server was last queried. Last Attempt St atus - S pecifies the status of the last SNTP request to this server . If no packet has been received from this server , a status of ...

  • Fujitsu BX600 - page 82

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 81 6.2.2.2 Configuring IBP Interface 6.2.2.2.1 Interface Configuration Page Selection Criteria Slot/Port - Selects the interface for which dat a is to be displayed or configured. Configurable Data Physical Mode - Use the pulldown menu to select the port ...

  • Fujitsu BX600 - page 83

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 82 6.2.2.2.2 Viewing Interface Configuration Page This screen displays the st atus for all ports in the box. Non-Configurable Port St atus Dat a Slot/Port - Identifies the port Port T ype - For normal ports this field will be blank. Otherwise the possib ...

  • Fujitsu BX600 - page 84

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 83 Refresh – Refresh the configuration value again. ...

  • Fujitsu BX600 - page 85

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 84 6.2.2.3 Managing System Utilities 6.2.2.3.1 Panel Reset Page Command Buttons Reset - Select this button to reboot the IBP . Any configuration changes you have made since the last time you issued a sav e will be lost. Y ou will be shown a confirmation ...

  • Fujitsu BX600 - page 86

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 85 6.2.2.3.4 Dow nloading S pecific Files to Panel Page Use this menu to download a file to the Panel. Configurable Data File T ype - S pecify wha t type of file you want to download: Script - specify configuration script when you want to updat e the IB ...

  • Fujitsu BX600 - page 87

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 86 6.2.2.3.5 Uploading Specific Files from Panel Page Use this menu to upload a code, configuration, or log file from the IBP . Configurable Data File T ype - S pecify the type of file you want to upload. The available options are Script, Code, CLI Bann ...

  • Fujitsu BX600 - page 88

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 87 6.2.2.3.6 Defining Configuration and Runtime St artup File Page S pecify the file used to start up the system. Configurable Data Configuration File - Configuration files. Runtime File - Run-time operation codes. Command Buttons Submit - Send the upda ...

  • Fujitsu BX600 - page 89

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 88 6.2.2.3.8 Copying Running Configuration to Panel Page Use this menu to copy a start-up configuration file from the running configuration file on IBP . Configurable Data File Name - Enter the name you want to give the file being copied. Y ou may enter ...

  • Fujitsu BX600 - page 90

    P a n e l S e t t i n g s M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 89 Command Buttons Submit - This will in itiate the ping. ...

  • Fujitsu BX600 - page 91

    S e c u r i t y M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 90 6.2.3 Security Menu 6.2.3.1 Managing RADIUS 6.2.3.1.1 Configuring RADIUS Configuration Page Configurable Data Max Number of Retransmits - The value of the maximum number of times a request packet is retransmitted. The valid range is 1 - 15. Consideration to ma ...

  • Fujitsu BX600 - page 92

    S e c u r i t y M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 91 6.2.3.1.2 Viewing Radius St atistics Page Non-Configurable Data Invalid Server Addresses - The number of RADIUS Access-Response packets received from unknown addresses. Command Buttons Refresh - Update the information on the page. 6.2.3.1.3 Configuring RADIUS ...

  • Fujitsu BX600 - page 93

    S e c u r i t y M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 92 Non-Configurable Data Current - Indicates if this server is currently in use as the authentication server . Secret Configured - Indicates if the shared secret for this server has been configured. Command Buttons Submit - Sends the updated screen to the IBP and ...

  • Fujitsu BX600 - page 94

    S e c u r i t y M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 93 malformed access-responses. Bad Authenticators - The number of RADIUS Access-Response packet s cont aining invalid authenticators or signature attributes received from this server . Pending Request s - The number of RADIUS Access-Request p ackets destined for ...

  • Fujitsu BX600 - page 95

    S e c u r i t y M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 94 Secret - S p ecifies the shared secret to use with the specifie d accounting server . This field is only displayed if the user has READWRITE access. Apply - The Secret will only be applied if this box is checked. If the box is not che cked, anything entered in ...

  • Fujitsu BX600 - page 96

    S e c u r i t y M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 95 that contained invalid a uthenticators received from this accounting server . Pending Request s - Displays the number of RADIUS Accounting-Request packet s sent to this server that have not yet timed out or received a response. Timeout s - Displays the number ...

  • Fujitsu BX600 - page 97

    S e c u r i t y M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 96 6.2.3.2 Defining TACACS Configuration 6.2.3.2.1 Configuring T ACACS Configuration Page Use this menu to configure the parameters for T ACACS+, which is used to verify the login user's authentication. Note that only a user with Read/W rite access privilege ...

  • Fujitsu BX600 - page 98

    S e c u r i t y M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 97 6.2.3.3 Defining Secure HTTP Configuration 6.2.3.3.1 Secure HTTP Configuration Page Configurable Data Admin Mode - This field is used to enable or disable the Administrative Mode of Secure HTTP . The currently configured value is shown when the web p age is di ...

  • Fujitsu BX600 - page 99

    S e c u r i t y M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 98 6.2.3.4 Defining Secure Shell Configuration 6.2.3.4.1 Configuring Secure Shell Configuration Page Configurable Data Admin Mode - This select field is used to Enable or Disable the administrative mode of SSH. The currently configured value is shown when the web ...

  • Fujitsu BX600 - page 100

    S e c u r i t y M e n u Web-Based Manag ement Interface Intelligent Blade Panel Module 99 ...

  • Fujitsu BX600 - page 101

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 100 6.2.4 Extended Configuration Menu 6.2.4.1 Viewing System Logs 6.2.4.1.1 Vi ewing Buffered Log Configuration Page This log stores messages in memory based upon the settings for message component and severity . On stackable systems, this log exist s only on ...

  • Fujitsu BX600 - page 102

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 101 Aug 24 05:34:05 by line 318 of file mstp_api.c. This is the 237th message logged. Messages logged to a collector or relay via syslog have an identical format to the above message. Note for buffered log Number of log messages displayed: For the buffered lo ...

  • Fujitsu BX600 - page 103

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 102 6.2.4.1.4 Configuring Console Log Page This allows logging to any serial device att ached to the host. Configurable Data Admin St atus -A log that is "Disabled" shall not log messages. A log that is "Enabled" shall log messages. Enable ...

  • Fujitsu BX600 - page 104

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 103 events. Af ter the event is logged and the updated log is saved in FLASH memo ry , the IBP module will be reset. The log can h old at least 2,000 entries ( the actual number depends on the platform and OS), and the oldest one will be erased when an attemp ...

  • Fujitsu BX600 - page 105

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 104 -Error (3): error conditions -W arning (4): warning conditions -Notice(5): normal but significant conditions -Informational(6): informational messages -Debug(7): debug-level messages Command Buttons Submit - Update the IBP with the values you entered. Ref ...

  • Fujitsu BX600 - page 106

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 105 ...

  • Fujitsu BX600 - page 107

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 106 6.2.4.1.8 Vi ewing Login Session Page Non-Configurable Data ID - Identifies the ID of this row . User Name - Shows the user name of user who made the session. Connection From - Shows the IP from which machine the user is connected. Idle Time - Shows the i ...

  • Fujitsu BX600 - page 108

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 107 6.2.4.2 Viewing Statistics 6.2.4.2.1 Viewing the Panel Det ailed St atistics Page Non-Configurable Data ifIndex - This object indicates the ifIndex of the interface table entry associated with t he Processor of this IBP. Octets Received - The total number ...

  • Fujitsu BX600 - page 109

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 108 to a higher-layer protocol. A possible reason for discarding a packet cou ld be to free up buffer space. Most Address Entries Ever Used - The highest number of Forwarding Database Address Table entries that have been learned by this IBP since the most rec ...

  • Fujitsu BX600 - page 110

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 109 Broadcast Packets Received - The total number of packets received that were directed to the broadcast address. Note that this does not include multicast p ackets. Packets Received with Errors - The number of inbound packets that contained errors preventin ...

  • Fujitsu BX600 - page 111

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 11 0 ifIndex - This object indicates the ifIndex of the interface table entry associated with t his port on an adapter. Packets RX and TX 64 Octets - The total number of packets (including bad packets) received or transmitted that were 64 octets in length (ex ...

  • Fujitsu BX600 - page 112

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 111 Packets Received 65-127 Octets - The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). Packets Received 128-255 Octets - The total number of ...

  • Fujitsu BX600 - page 113

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 11 2 Alignment Errors - The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame Check Sequence (FCS) with a non-integral number of octets. Rx FCS E ...

  • Fujitsu BX600 - page 114

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 11 3 Maximum Frame Size - The maximum ethernet frame size the interface supports or is configured, including ethernet header, CRC, and payload. (1518 to 9216). The default maximum frame size is 1518 . Total Packets Transmitted Successfully - The number of fra ...

  • Fujitsu BX600 - page 115

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 11 4 ...

  • Fujitsu BX600 - page 116

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 11 5 ...

  • Fujitsu BX600 - page 117

    C L I C o m m a n d F o r m a t Command Reference Intelligent Blade Panel Module 11 6 6.2.4.2.4 Viewing Each Port Summary St atistics Page Selection Criteria Slot/Port - Selects the interface for which dat a is to be displayed or configured. Non-Configurable Data ifIndex - This object indicates the ifI ndex of the interface table entry associated w ...

  • Fujitsu BX600 - page 118

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 11 7 6.2.4.3 Managing Access Control (802.1x) 6.2.4.3.1 Defining Access Control Page Configurable Data Administrative Mode - This selector list s the two options for administrative mode: enable and disable. The default value is disabled. Command Buttons Submi ...

  • Fujitsu BX600 - page 119

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 11 8 EAP Request/Identity frame to the supplicant. The transmit period must be a number in the range of 1 to 65535. The default value is 30. Changing the value will not change the configuration until the Submit button is pressed. Supplicant Timeout - T his in ...

  • Fujitsu BX600 - page 120

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 11 9 6.2.4.3.3 Viewing each Port Access Control Configuration Information Page Selection Criteria Port - Selects the port to be displayed. When the selection is changed, a screen refresh will occur causing all fields to be updated f or the newly selected port ...

  • Fujitsu BX600 - page 121

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 120 Server Timeout - This field displays the conf igured server timeout for the selected port. The server timeout is the value, in seconds, of the timer used by the authenticator o n this port to timeout the authentication ser ver . The server timeout is a va ...

  • Fujitsu BX600 - page 122

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 121 "T imeout" "Initialize" "Idle" Command Buttons Refresh - Update the information on the page. 6.2.4.3.4 Viewing Access Control Summary Page Non-Configurable Data Port - S pecifies the port whose settings are displayed in the c ...

  • Fujitsu BX600 - page 123

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 122 Reauthentication Enabled - This field shows whether reauthentication of the sup plicant for the specified port is allowed. The possible values are 'true' and 'false'. If the value is 'true' reauthentication will occur . Other ...

  • Fujitsu BX600 - page 124

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 123 6.2.4.3.5 Viewing each Port Access Control St atistics Page Selection Criteria Port - Selects the port to be displayed. When the selection is changed, a screen refresh will occur causing all fields to be updated f or the newly selected port. All physical ...

  • Fujitsu BX600 - page 125

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 124 6.2.4.3.6 Defining Access Control User Login Page Selection Criteria Users - Selects the user name that will use the selected login list for 802.1x port security . Configurable Data Login - Selects the login to apply to the specified user . All configured ...

  • Fujitsu BX600 - page 126

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 125 6.2.4.3.7 Defining Each Port Access Privileges Page Selection Criteria Port - Selects the port to configure. Configurable Data Users - Selects the users that have access to the specified port or port s. Command Buttons Submit - Sends the updated screen to ...

  • Fujitsu BX600 - page 127

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 126 ...

  • Fujitsu BX600 - page 128

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 127 6.2.4.4 Managing IP Filter 6.2.4.4.1 IP Filter Configuration Page Management IP filter designates st ations that are allowed to make configuration changes to the IBP . Select up to five management stations use d to manage the IBP . If you choose to define ...

  • Fujitsu BX600 - page 129

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 128 6.2.4.5 Managing Authentication Configuration 6.2.4.5.1 Defining Authentication List Configuration Page Y ou use this screen to configure login lists. A login list specifies the authentication method(s) you want used to validate IBP or port access for the ...

  • Fujitsu BX600 - page 130

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 129 perform a save. 6.2.4.5.2 Viewing Authentication List Summary Page Non-Configurable Data Authentication List - Identifies the authentication login list summarized in this row . Method List - The order ed list of methods configured for this login list. Log ...

  • Fujitsu BX600 - page 131

    Extended Configuration Menu Web-Based Manag ement Interface Intelligent Blade Panel Module 130 User Login Configuration screen. If you need to create a ne w login list for the user , you would do so on the Login Configuration screen. The pre-configured users, admin and guest, are assigned to a pre-configured list named defaultList, which you may no ...

  • Fujitsu BX600 - page 132

    C L I C o m m a n d F o r m a t Command Reference Intelligent Blade Panel Module 131 7 Command Reference The Command Line Interface (CLI) syntax, conventions, and terminology are described in this section. Each CLI command is illustrated using the structure outlined below. 7.1 CLI Command Format Commands are followed by values, parameters, or both. ...

  • Fujitsu BX600 - page 133

    C L I M o d e - b a s e d T o p o l o g y Command Reference Intelligent Blade Panel Module 132 7.2 CLI Mode-based Topology Parameters Parameters are order dependent. The text in bold italics should be replaced with a name or number. To use spaces as part of a name parameter, enclose it in double quotes like this: "System Name with Spaces" ...

  • Fujitsu BX600 - page 134

    C L I M o d e - b a s e d T o p o l o g y Command Reference Intelligent Blade Panel Module 133 Conventions Network addresses are used to define a link to a remote host, workstation, or network. Network addresses are shown using the following syntax: Table 5-1. Network Address Syntax Address T ype Format Range IP Addr A.B.C.D 0.0.0.0 to 255.255.255. ...

  • Fujitsu BX600 - page 135

    System Information and S t atistics commands Command R eference Intelligent Blade Panel Module 134 7.3 System Information and Statistics commands 7.3.1 show arp This command displays connectivity between the IBP and other devices. The Address Resolution Protocol (ARP) cache identifies the MAC addresses of the IP stations communicating with the IBP. ...

  • Fujitsu BX600 - page 136

    System Information and S t atistics commands Command R eference Intelligent Blade Panel Module 135 Privileged Exec Display Message Current Time displays system time 7.3.3 show eventlog This command displays the event log, which contains error messages from the system, in the Primary Management System . The event l og is not cleared on a system rese ...

  • Fujitsu BX600 - page 137

    System Information and S t atistics commands Command R eference Intelligent Blade Panel Module 136 name extension of “.scr”, the output will be redirected to a script file. Syntax show running-config [all] [<scriptname>] [all] - enable the display/capture of all commands with settings/configura tions that include values that are same as t ...

  • Fujitsu BX600 - page 138

    System Information and S t atistics commands Command R eference Intelligent Blade Panel Module 137 7.3.6 show system This command displays IBP system information. Syntax show system Default Setting None Command Mode Privileged Exec Display Message System Description: Text used to identify this I BP. System Object ID: The manufacturing ID System Inf ...

  • Fujitsu BX600 - page 139

    System Information and S t atistics commands Command R eference Intelligent Blade Panel Module 138 Privileged Exec Display Message System Description: Text used to identify the product name of this IBP. Machine Type: Specifies the machine model as defined by the Vital Product Data. Machine Model: Specifies the machine model as defined by the Vital ...

  • Fujitsu BX600 - page 140

    System Information and S t atistics commands Command R eference Intelligent Blade Panel Module 139 running on the IBP . For example, if the major version was 2 and the minor version was 4, the format would be '2.4'. Operating Code Version: The release version maintenance number of the code cu rrently running on the IBP . For example, if t ...

  • Fujitsu BX600 - page 141

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 140 7.4 Device Configuration Commands 7.4.1 Interface 7.4.1.1 show interface status This command displays the Port monitoring information for the system. Syntax show interface st atus {<slot/port> | all} <slot/port> - is the desired in ...

  • Fujitsu BX600 - page 142

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 141 7.4.1.2 show interface This command displays the Port monitoring information for the system. Syntax show interface <slot/port> <slot/port> - is the desired interface number . Default Setting None Command Mode Privileged Exec Displa ...

  • Fujitsu BX600 - page 143

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 142 all - This command displays statistics information for all interfaces. Default Setting None Command Mode Privileged Exec Display Message The display parameters when the argument is '<slot/port>' are as follows: Packets Received ...

  • Fujitsu BX600 - page 144

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 143 Syntax show interface counters det ailed {<slot/port> | switchport} <slot/port> - is the desired interface number . switchport - This p arameter specifies whole IBP or all interfaces. Default Setting None Command Mode Privileged Ex ...

  • Fujitsu BX600 - page 145

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 144 received that were between 256 and 511 octets in length inclusive (excluding framin g bits but including FCS octets). Packets RX and TX 512-1023 Octets: The total number of packets (including bad packets) received that were between 512 and 102 ...

  • Fujitsu BX600 - page 146

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 145 Packets Transmitted 65-127 Octets: The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). Packets Transmitted 128-255 Octets: The ...

  • Fujitsu BX600 - page 147

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 146 seconds since the statistics for this port were last cleared. The display parameters when the argument is ‘switchport’ are as follows: Total Packets Received (Octets): The total number of octets of data received by the processor (excluding ...

  • Fujitsu BX600 - page 148

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 147 7.4.1.4 show interface IBP This command displays a summary of statistics for all CPU traffic. Syntax show interface switch Default Setting None Command Mode Privileged Exec Display Message Packets Received Without Error: The total number of pa ...

  • Fujitsu BX600 - page 149

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 148 7.4.1.5 interface This command is used to enter Interface configuration mode. Syntax interface <slot/port> <slot/port> - is the desired interface number . Default Setting None Command Mode Global Config 7.4.1.6 interface range This ...

  • Fujitsu BX600 - page 150

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 149 7.4.1.7 speed-duplex This command is used to set the speed and duplex mode for the interface. Syntax speed-duplex {10 | 100} {full-duplex | half-duplex} 100 - 100BASE-T 10 - 10BASE-T full-duplex - Full duplex half-duplex - Half duplex Default ...

  • Fujitsu BX600 - page 151

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 150 7.4.1.8 negotiate This command enables automatic negotiation on a port. The default value is enabled. Syntax negotiate no negotiate no - This command disables automatic negotiation on a port. Default Setting Enable Command Mode Interface Confi ...

  • Fujitsu BX600 - page 152

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 151 7.4.1.9 capabilities This command is used to set the capabilities on specific interface. Syntax cap abilities {{10 | 100 } {full-duplex | half-duplex}} | {1000 full-duplex } no cap abilities {{10 | 100 } {full-duplex | half-duplex}} | {1000 fu ...

  • Fujitsu BX600 - page 153

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 152 7.4.1.10 description This command is used to add a description for the interface. Syntax description <string> <dtring> - Up to 64 characters describing this interface. Default Setting None Command Mode Interface Config 7.4.1.11 sto ...

  • Fujitsu BX600 - page 154

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 153 Syntax storm-control flowcontrol no storm-control flowcontrol no - This command disables 802.3x flow control for the specific interface. Default Setting Disabled Command Mode Interface Config 7.4.2 L2 MAC Address and Multicast Forw arding Data ...

  • Fujitsu BX600 - page 155

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 154 information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address will be d isplayed as 8 bytes. In an SVL system, the MAC address will be displayed as ...

  • Fujitsu BX600 - page 156

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 155 7.4.2.3 show mac-address-table multicast This command displays the MFDB information. If the command is entered with no parameter, the entire table is displayed. This is the same as entering the all parameter. The user can display the table ent ...

  • Fujitsu BX600 - page 157

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 156 7.4.2.4 show mac-address-table stats This command displays the MFDB statistics. Syntax show mac-address-t able st at s Default Setting None Command Mode Privileged Exec Display Message Max MFDB Table Entries: This displays the total number of ...

  • Fujitsu BX600 - page 158

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 157 7.4.2.6 mac-address-table aging-time This command configures the forwarding database address aging timeout in seconds. Syntax mac-address-t able aging-time <10-1000000> no mac-address-t able aging-time <10-1000000> <10-1000000&g ...

  • Fujitsu BX600 - page 159

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 158 7.4.3.2 Configuration Commands 7.4.3.2.1 igmp snooping This command enables IGMP Snooping on a Uplink Set. The default value is enabled. Syntax igmp snooping <uplinkSetName> no igmp snooping <uplinkSetName> <uplinkSetName> - ...

  • Fujitsu BX600 - page 160

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 159 7.4.4.2 show lacp This command enables Link Aggregation Control Protocol (LACP) on a uplink set. Syntax show lacp [<uplinkSetName>] <uplinkSetName> - The name of a uplink set which the LACP to be enabled or disabled. Default Settin ...

  • Fujitsu BX600 - page 161

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 160 Port Backup: The status of port backup for the uplink set. IGMP snooping: The status of the IGMP snooping for the u plink set. LACP: The status of the LACP for the uplink set. 7.4.5.2 Configuration Commands 7.4.5.2.1 uplink-set This command is ...

  • Fujitsu BX600 - page 162

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 161 7.4.6.1 Show Commands This command display the port group information. Syntax show port-group [<portGroupName>] <portGroupName> - The name of a port group which user want to display . Default Setting None Command Mode Privileged Ex ...

  • Fujitsu BX600 - page 163

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 162 Syntax port-group <portGroupName> no port-group <portGroupName> <portGroupName> - A string associated with port group as a convenience. It should be an existing port group. no - This command remove a port from a port group. D ...

  • Fujitsu BX600 - page 164

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 163 7.4.7.2 Configuration Commands 7.4.7.2.1 port-backup This command is used to enable or disable port backup for a uplink set Syntax port-backup <uplinkSetName> no port-backup <uplinkSetName> <uplinkSetName> - A string associat ...

  • Fujitsu BX600 - page 165

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 164 no - This command move the port to active-port list. Restriction: users are not allowe d to move the last member of active port to backup port. Default Setting None Command Mode Interface Config 7.4.8 Link State 7.4.8.1 Show Commands This comm ...

  • Fujitsu BX600 - page 166

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 165 linkst ate <uplinkSetName> no linkst ate <uplinkSetName> <uplinkSetName> - A string associated with uplink set as a convenience. It should be an existing uplink set. no - This command disable linkstate for an existing uplink ...

  • Fujitsu BX600 - page 167

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 166 7.4.9.2 Configuration Commands 7.4.9.2.1 vlan-group This command is used to create or destroy a vlan port group. Syntax vlan-group <vlanGroupName> <1-4094> <uplinkSetName> no vlan-group <vlanGroupName> <vlanGroupName ...

  • Fujitsu BX600 - page 168

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 167 <vlanGroupName> - A string associated with vlan port group as a convenience. no - This command set the native VLAN option back to default value.. Default Setting Disable Command Mode Global Config ...

  • Fujitsu BX600 - page 169

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 168 7.4.10 Service LAN 7.4.10.1 Show Commands This command display the Service LAN information. Syntax show svc-lan [<svcLanName>] <svcLanName> - The name of Service LAN which user want to display . Default Setting None Command Mode Pr ...

  • Fujitsu BX600 - page 170

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 169 no - This command destroy the specified Service LAN. Default Setting None Command Mode Global Config This command is used to add/remove a port to/from Service LAN. Syntax svc-lan <svcLanName> no svc-lan <svcLanName> <svcLanName& ...

  • Fujitsu BX600 - page 171

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 170 7.4.11 Service VLAN 7.4.11.1 Show Commands This command display the Service VLAN information. Syntax show svc-vlan [<svcVlanName>] <svcVlanName> - The name of Service VLAN which user want to display . Default Setting None Command M ...

  • Fujitsu BX600 - page 172

    D e v i c e C o n f i g u r a t i o n C o m m a n d s Command Reference Intelligent Blade Panel Module 171 no - This command destroy the existing Service VLAN. Default Setting None Command Mode Global Config This command is used to add/remove a port to/from Service VLAN. Syntax svc-vlan <svcVlanName> no svc-vlan <svcVlanName> <svcVla ...

  • Fujitsu BX600 - page 173

    Management Commands Command Reference Intelligent Blade Panel Module 172 7.5 Management Commands 7.5.1 Network Commands 7.5.1.1 show ip interface This command displays configuration settings associated with the IBP's network interface. The network interface is the logical interface used fo r in-band connectivity with the IBP via any of the IBP ...

  • Fujitsu BX600 - page 174

    Management Commands Command Reference Intelligent Blade Panel Module 173 Display Message IP default gateway: The default gateway for this IP interface. The factory default value is 0.0.0.0 7.5.1.3 show ip filter This command displays management IP filter st atus and all designated management st ations. Syntax show ip filter Default Setting None Com ...

  • Fujitsu BX600 - page 175

    Management Commands Command Reference Intelligent Blade Panel Module 174 1518 Command Mode Interface Config 7.5.1.5 ip address This command sets the IP Address, and subnet mask. The IP Address and the gateway must be on the same subnet. Syntax ip address <ip addr> <netmask> [<vlan-id>] no ip address <ipaddr> - IP address < ...

  • Fujitsu BX600 - page 176

    Management Commands Command Reference Intelligent Blade Panel Module 175 < gateway > - IP address of the default gateway no - Restore the default IP address of the default gateway Default Setting IP address: 0.0.0.0 Command Mode Global Config 7.5.1.7 ip address protocol This command specifies the network configuration protocol to be used. If ...

  • Fujitsu BX600 - page 177

    Management Commands Command Reference Intelligent Blade Panel Module 176 Syntax ip address mgmt-vlan <vlanID> <vlanID> - VLAN ID (Range: 1 – 4094). Default Setting VLAN ID: 1. Command Mode Global Config 7.5.1.9 ip filter This command is used to enable the IP filter function. Syntax ip filter no ip filter no – Disable ip filter. Defa ...

  • Fujitsu BX600 - page 178

    Management Commands Command Reference Intelligent Blade Panel Module 177 Syntax ip filter <ip addr> no ip filter <ip addr> <ipaddr> - Configure a IP address to be a filter. No - Remove this filter IP address. Default Setting None Command Mode Global Config 7.5.2 Serial Interface Commands 7.5.2.1 show line console This command disp ...

  • Fujitsu BX600 - page 179

    Management Commands Command Reference Intelligent Blade Panel Module 178 Control is always disabled. Stop Bits: The number of Stop bits per character. The number of Stop bits is always 1. Parity: The Parity Method used on the Serial Port. The Parity Method is always None. Password Threshold: When the logon attempt threshold is reached on the consol ...

  • Fujitsu BX600 - page 180

    Management Commands Command Reference Intelligent Blade Panel Module 179 7.5.2.4 exec-timeout This command specifies the maximum connect time (in minutes) without console activity. A value of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160. Syntax exec-timeout <0-160> <0-160> - max connect time (Rang ...

  • Fujitsu BX600 - page 181

    Management Commands Command Reference Intelligent Blade Panel Module 180 7.5.2.6 silent-time This command uses to set the amount of time the management console is inaccessible after the number of unsuccessful logon tries exceeds the threshold value. Syntax Silent-time <0-65535> <0-65535> - silent time (Range: 0 - 65535) in seconds. no - ...

  • Fujitsu BX600 - page 182

    Management Commands Command Reference Intelligent Blade Panel Module 181 Default Setting None Command Mode Privileged Exec 7.5.3.2 show line vty This command displays telnet settings. Syntax show line vty Default Setting None Command Mode Privileged Exec Display Message Remote Connection Login Timeout (minutes): This object indicates the number of ...

  • Fujitsu BX600 - page 183

    Management Commands Command Reference Intelligent Blade Panel Module 182 Default Setting None Command Mode Global Config 7.5.3.4 exec-timeout This command sets the remote connection session timeout value, in minutes. A session is active as long as the session has been idle for the value set. A value of 0 indicat es that a session remains active ind ...

  • Fujitsu BX600 - page 184

    Management Commands Command Reference Intelligent Blade Panel Module 183 p assword-threshold <0-120> no p assword-threshold <threshold> - max threshold (Range: 0 - 120). no - This command sets the maximum value to the default. Default Setting 3 Command Mode T elnet Config 7.5.3.6 maxsessions This command specifies the maximum number of ...

  • Fujitsu BX600 - page 185

    Management Commands Command Reference Intelligent Blade Panel Module 184 Syntax sessions no sessions no - This command disables telnet sessions. If sessions are disabled, no new telnet sessions are established. Default Setting Enabled Command Mode T elnet Config 7.5.3.8 telnet sessions This command regulates new outbound telnet connections. If enab ...

  • Fujitsu BX600 - page 186

    Management Commands Command Reference Intelligent Blade Panel Module 185 This command specifies the maximum number of simultaneous outbound telnet sessions. A value of 0 indicates that no outbound telnet session can be established. Syntax telnet maxsessions <0-5> no maxsessions <0-5> - max sessions (Range: 0 - 5). no - This command sets ...

  • Fujitsu BX600 - page 187

    Management Commands Command Reference Intelligent Blade Panel Module 186 Global Config 7.5.3.11 show telnet This command displays the current outbound telnet settings. Syntax show telnet Default Setting None Command Mode User Exec, Privileged Exec Display Message Outbound Telnet Login Timeout (in minutes) Indicates the number of minutes an outbound ...

  • Fujitsu BX600 - page 188

    Management Commands Command Reference Intelligent Blade Panel Module 187 SNMP community parameters). Syntax show snmp Default Setting None Command Mode Privileged Exec Display Message SNMP Community Name: The community string to which this entry grants access. A valid entry is a case-sensitive alphanumeric string of up to 16 characters. Ea ch row o ...

  • Fujitsu BX600 - page 189

    Management Commands Command Reference Intelligent Blade Panel Module 188 Command Mode Privileged Exec Display Message Authentication Flag: May be enabled or disabled. The factory default is enabled. Indicates whether authentication failure traps will be sent. Link Up/Down Flag: May be enabled or disabled. The factory default is enabled. Indicates w ...

  • Fujitsu BX600 - page 190

    Management Commands Command Reference Intelligent Blade Panel Module 189 Default Setting None Command Mode Global Config 7.5.4.5 snmp-server contact This command sets the organization responsible for the network. The range for conta ct is from 1 to 31 alphanumeric characters. Syntax snmp-server cont act <con> <con> - Range is from 1 to ...

  • Fujitsu BX600 - page 191

    Management Commands Command Reference Intelligent Blade Panel Module 190 <name> - community name (up to 16 case-sensitive characters). no - This command removes this community nam e from the table. The name is the community name to be deleted. Default Setting Two default community names: public and private. You can replace these default commu ...

  • Fujitsu BX600 - page 192

    Management Commands Command Reference Intelligent Blade Panel Module 191 This command sets a client IP mask for an SNMP community. The address is the associated community SNMP packet sending address and is used along with the client IP address value to denote a range of IP addresses from which SNMP clients may use that community to access the devic ...

  • Fujitsu BX600 - page 193

    Management Commands Command Reference Intelligent Blade Panel Module 192 Command Mode Global Config 7.5.4.7 snmp-server host This command sets a client IP address for an SNMP community. The address is the associated community SNMP packet sending address and is used along with the client IP mask value to denote a range of IP addresses from which SNM ...

  • Fujitsu BX600 - page 194

    Management Commands Command Reference Intelligent Blade Panel Module 193 Default Setting Enabled Command Mode Global Config This command enables Link Up/Down traps for the entire IBP. When enabled, link traps are sent only if the Link Trap flag setting associated with the port is enabled (see ‘snmp trap link-status’ command). Syntax snmp-server ...

  • Fujitsu BX600 - page 195

    Management Commands Command Reference Intelligent Blade Panel Module 194 Enabled Command Mode Global Config 7.5.5 SNMP Trap Commands 7.5.5.1 show snmptrap This command displays SNMP trap receivers. Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring w ithin the IBP or on the netwo ...

  • Fujitsu BX600 - page 196

    Management Commands Command Reference Intelligent Blade Panel Module 195 7.5.5.2 snmp trap link-status This command enables link status traps by interface. Note: This command is valid only when the Link Up/Down Flag is enabled. See ‘snmpserver enable traps linkmode’ command. Syntax snmp trap link-st atus no snmp trap link-st atus no - This comm ...

  • Fujitsu BX600 - page 197

    Management Commands Command Reference Intelligent Blade Panel Module 196 Default Setting Disabled Command Mode Global Config 7.5.5.3 snmptrap <name> <ipaddr> This command adds an SNMP trap name. The maximum length of the name is 16 case-sensitive alphanumeric characters. Syntax snmptrap <name> <ip addr> no snmptrap <name& ...

  • Fujitsu BX600 - page 198

    Management Commands Command Reference Intelligent Blade Panel Module 197 snmptrap ip addr <name> <ip addr> <ipaddrnew> <name> - SNMP trap name. <ipaddr> - an original IP address. <ipaddrnew> - a new IP address. Default Setting None Command Mode Global Config 7.5.5.5 snmptrap mode This command activates or deactiv ...

  • Fujitsu BX600 - page 199

    Management Commands Command Reference Intelligent Blade Panel Module 198 This command displays the http settings for the IBP. Syntax show ip http Default Setting None Command Mode Privileged Exec Display Message HTTP Mode (Unsecure): This field indicates whether the HTTP mode is enabled or disabled. HTTP Port: This field specifies the port configur ...

  • Fujitsu BX600 - page 200

    Management Commands Command Reference Intelligent Blade Panel Module 199 7.5.6.3 ip http port This command is used to set the http port where port can be 1-65535 and the default is port 80. Syntax ip http port <1-65535> no ip http port <1-65535> - HTTP Port value. no - This command is used to reset the http port to the default value. De ...

  • Fujitsu BX600 - page 201

    Management Commands Command Reference Intelligent Blade Panel Module 200 Command Mode Global Config 7.5.6.5 ip http secure-port This command is used to set the SSLT port where port can be 1-65535 and the default is port 443. Syntax ip http secure-port <portid> no ip http secure-port <portid> - SSLT Port value. no - This command is used ...

  • Fujitsu BX600 - page 202

    Management Commands Command Reference Intelligent Blade Panel Module 201 Global Config 7.5.6.7 ip http secure-protocol This command is used to set protocol levels (versions). The protocol lev el can be set to TLS1, SSL3 or to both TLS1 and SSL3. Syntax ip http secure-protocol <protocollevel1> [protocollevel2] no ip http secure-protocol <pr ...

  • Fujitsu BX600 - page 203

    Management Commands Command Reference Intelligent Blade Panel Module 202 Display Message Administrative Mode: This field indicates whether the administrative mode of SSH is enabled or disabled. Protocol Levels: The protocol level may have the values of version 1, version 2, or both versions. SSH Sessions Currently Active: This field specifies the c ...

  • Fujitsu BX600 - page 204

    Management Commands Command Reference Intelligent Blade Panel Module 203 Default Setting SSH1 and SSH2 Command Mode Global Config 7.5.7.4 ip ssh maxsessions This command specifies the maximum number of SSH connection sessions that can be established. A value of 0 indicates that no ssh connection ca n be established. The range is 0 to 5. Syntax ip s ...

  • Fujitsu BX600 - page 205

    Management Commands Command Reference Intelligent Blade Panel Module 204 Syntax ip ssh timeout <1-160> no ip ssh timeout <1-160> - timeout interval in seconds. no - This command sets the SSH connection session timeout value, in minutes, to the default. Changing the timeout value for active sessions doe s not become effective until the s ...

  • Fujitsu BX600 - page 206

    Management Commands Command Reference Intelligent Blade Panel Module 205 Syntax ip dhcp client-identifier {text <text> | hex <hex>} no ip dhcp client-identifier <text> - A text string. (Range: 1-15 characters). <hex> - The hexadecimal value (00:00:00:00:00:00). no - This command is used to restore to default value. Default S ...

  • Fujitsu BX600 - page 207

    Management Commands Command Reference Intelligent Blade Panel Module 206 7.5.9 LOCK Commands 7.5.9.1 lock This command locks the http access to the IBP and registers the passed “lock_iden tifier” with this lock. When the lock is set, the Web-GUI presents a message that access to this IBP is currently not possible, bcause it is managed by anothe ...

  • Fujitsu BX600 - page 208

    Management Commands Command Reference Intelligent Blade Panel Module 207 If you want to remove this lock, this Blade server must not be managed by any Virtual IO Manager. In order to release the lock without using the Virtual IO Manager issue the command "no lock <lock_identifier>" for each lock identifier that is registered.” Com ...

  • Fujitsu BX600 - page 209

    System Log Management Commands Command Reference Intelligent Blade Panel Module 208 7.6 System Log Management Commands 7.6.1 Show Commands 7.6.1.1 show logging This command displays logging. Syntax Show logging Default Setting None Command Mode Privileged Exec Display Message Logging Client Local Port The port on the collector/relay to which syslog ...

  • Fujitsu BX600 - page 210

    System Log Management Commands Command Reference Intelligent Blade Panel Module 209 Default Setting None Command Mode Privileged Exec Display Message Message: The message that has been logged. Note: Message log information is not retained across a system reset. 7.6.3 show logging traplog This command displays the trap log maintained by the IBP. The ...

  • Fujitsu BX600 - page 211

    System Log Management Commands Command Reference Intelligent Blade Panel Module 210 Syntax Show logging host s Default Setting None Command Mode Privileged Exec Display Message Index (used for deleting) IP Address IP Address of the configured server. Severity The minimum severity to log to the specified address. Port Server Port Number.This is the ...

  • Fujitsu BX600 - page 212

    System Log Management Commands Command Reference Intelligent Blade Panel Module 21 1 This command enables wrapping of in-memory logging when full capacity reached. Otherwise when full capacity is reached, logging stops. Syntax logging buffered wrap no logging buffered wrap no - This command disables wrapping of in-mem ory logging when full capacity ...

  • Fujitsu BX600 - page 213

    System Log Management Commands Command Reference Intelligent Blade Panel Module 212 7.6.4.3 logging host This command enables logging to a host where up to eight hosts can be configured. Syntax logging host <host address> [ <port>] [[<severitylevel> | <0-7>]] <hostaddress> - IP address of the log server. <port> - ...

  • Fujitsu BX600 - page 214

    System Log Management Commands Command Reference Intelligent Blade Panel Module 213 This command reconfigures the IP address of the log server. Syntax logging host reconfigure <hostindex> <host address> < hostindex > - Index of the log server. <hostaddress> - New IP address of the log server. Default Setting None Command Mod ...

  • Fujitsu BX600 - page 215

    System Log Management Commands Command Reference Intelligent Blade Panel Module 214 Syntax logging syslog port <portid> no logging syslog port no - Resets the local logging port to t he default. Default Setting None Command Mode Privileged Exec 7.6.4.5 clear logging buffered This command clears all in-memory log. Syntax clear logging buffered ...

  • Fujitsu BX600 - page 216

    S c r i p t M a n a g e m e n t C o m m a n d s Command Reference Intelligent Blade Panel Module 215 7.7 Script Management Commands 7.7.1 script apply This command applies the commands in the configuration script to the IBP. The apply command backs up the running configuration and then starts applying the commands in the script file. Application of ...

  • Fujitsu BX600 - page 217

    S c r i p t M a n a g e m e n t C o m m a n d s Command Reference Intelligent Blade Panel Module 216 7.7.3 script list This command lists all scripts present on the IBP as well as the total number of files present. Syntax script list Default Setting None Command Mode Privileged Exec 7.7.4 script show This command displays the content of a script fi ...

  • Fujitsu BX600 - page 218

    User Account Management Commands Command Reference Intelligent Blade Panel Module 217 7.8 User Account Management Commands 7.8.1 Show Commands 7.8.1.1 show users This command displays the configured user names and their settings. This command is only available for users with readwrite privileges. The SNMPv3 fields will only be displayed if SNMP is ...

  • Fujitsu BX600 - page 219

    User Account Management Commands Command Reference Intelligent Blade Panel Module 218 This command adds a new user (account) if space permits. The account <username> can be up to eight characters in length. The name may be comprised of alphanumeric characters as well as the dash (‘-’) and underscore (‘_’). The <username> is not ...

  • Fujitsu BX600 - page 220

    User Account Management Commands Command Reference Intelligent Blade Panel Module 219 <username> - is the login user name. md5 - md5 authentication method. sha - sha authentication method. none - no use authentication method. no - This command sets the authentication protocol to be used for the specified login user to none . The <username& ...

  • Fujitsu BX600 - page 221

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 220 7.9 Security Commands 7.9.1 Show Commands 7.9.1.1 show users authentication This command displays all users and all authentication logi n information. It also displays the authentication login list assigned to the default user. Syntax show users authentication Defa ...

  • Fujitsu BX600 - page 222

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 221 Authentication Login List: This displays the authentication login listname. Method 1: This displays the first method in the specified au thentication login list, if any. Method 2: This displays the second method in the specified authentica tion login list, if any. ...

  • Fujitsu BX600 - page 223

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 222 Privileged Exec Display Message Administrative mode: Indicates whether authentication control on the IBP is enabled or disabled. 7.9.1.5 show dot1x detail This command is used to show a summary of the global dot1x configuration and the detailed dot1x configuration ...

  • Fujitsu BX600 - page 224

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 223 this port will retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The value will be in the range of 1 to 10. Reauthentication Period: The timer used by the authenticator state machine on this port to determine when reauthentication of the su ...

  • Fujitsu BX600 - page 225

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 224 EAP Response Frames Received: The number of valid EAP response frames (other than resp/id frames) that have been received by this authenticator. EAP Request/Id Frames Transmitted: The number of EAP request/identity frames that have been transmitted by this authenti ...

  • Fujitsu BX600 - page 226

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 225 Syntax show dot1x users <slot/port> <slot/port> - is the desired interface number. Default Setting None Command Mode Privileged Exec Display Message User: Users configured locally to have access to the specified port. 7.9.1.9 show radius-servers This co ...

  • Fujitsu BX600 - page 227

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 226 Syntax show radius Default Setting None Command Mode Privileged Exec Display Message Current Server IP Address: Indicates the configured server currently in use for authentication Number of configured servers: The configured IP address of the authentication ser ver ...

  • Fujitsu BX600 - page 228

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 227 Secret Configured: Yes or No If the optional token 'statistics <ipaddr>' is included, the statistics for the configured RADIUS accounting server are displayed. The IP address parameter must match that of a previously configured RADIUS accounting ser ...

  • Fujitsu BX600 - page 229

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 228 Privileged Exec Display Message If an IP address is not specified then only the Invalid Server Addresses field is displayed. Otherwise, the other listed fields are displayed. Invalid Server Addresses: The number of RADIUS Access-Response packets received from unkno ...

  • Fujitsu BX600 - page 230

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 229 Privileged Exec Display Message Admin Mode: Displays TACACS administration mode. Server 1 Port: TACACS packet port number Server 1 Key: Secret Key between TACACS server and client Server 1 IP: First TACACS Server IP address Server 1 Timeout (sec): Timeout value in ...

  • Fujitsu BX600 - page 231

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 230 Privileged Exec Display Message Port Security Administration Mode: Port lock mode for the entire system. This command shows the port-security settings for a particular interface or all interfaces. Syntax show port-security { <slot/port> | all } Default Settin ...

  • Fujitsu BX600 - page 232

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 231 Syntax show port-security st atic <slot/port> Default Setting None Command Mode Privileged Exec Display Message MAC address Statically locked MAC address. This command displays the source MAC address of the last packet that was discard ed on a locked port. Sy ...

  • Fujitsu BX600 - page 233

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 232 list of methods are set in the authe ntication login list. If the authentication login list does not exist, a new authentication login list is first created and then the authentication methods are set in the authentication login list. The maximum number of authenti ...

  • Fujitsu BX600 - page 234

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 233 Syntax username defaultlogin <listname> <listname> - an authentication login list. Default Setting None Command Mode Global Config 7.9.2.3 username login This command assigns the specified authentication login list to the specified user for system login ...

  • Fujitsu BX600 - page 235

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 234 7.9.3 Dot1x Configuration Commands 7.9.3.1 dot1x initialize This command begins the initialization sequence on the specified port. This command is only valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' ...

  • Fujitsu BX600 - page 236

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 235 7.9.3.3 dot1x login This command assigns the specified authentication login list to the specified user for 802.1x port security. The <user> parameter must be a configured user and the <listname> parameter must be a configured authentication login list. ...

  • Fujitsu BX600 - page 237

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 236 7.9.3.5 dot1x user This command adds the specified user to the list of users with access to th e specified port or all ports. The <username> parameter must be a configured user. Syntax dot1x user <user> {<slot/port> | all} no dot1x user <user&g ...

  • Fujitsu BX600 - page 238

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 237 no - This command sets the authentication mode to be used on all ports to 'auto'. Default Setting auto Command Mode Global Config This command sets the authentication mode to be used on the specified port. The control mode may be one of the following. for ...

  • Fujitsu BX600 - page 239

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 238 dot1x max-req <1-10> no dot1x max-req <1-10> - maximum number of times (Range: 1 – 10). no - This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out ...

  • Fujitsu BX600 - page 240

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 239 Syntax dot1x re-authenticate <slot/port> <slot/port> - is the desired interface number. Default Setting None Command Mode Privileged Exec 7.9.3.10 dot1x timeout This command sets the value, in seconds, of the timer used b y the authenticator state machi ...

  • Fujitsu BX600 - page 241

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 240 <seconds> no dot1x timeout {quiet-period | reauth-period | server-timeout | supp-timeout | tx-period} <seconds> - Value in the range 0 – 65535. no - This command sets the value, in seconds, of the timer used by the authenticator state machine on this ...

  • Fujitsu BX600 - page 242

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 241 7.9.4.2 radius-server host This command is used to configure the RADIUS authentication and accounting server. If the 'auth' token is used, the comm and configures the IP address to use to connect to a RADIUS authentication server. Up to 3 servers can be c ...

  • Fujitsu BX600 - page 243

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 242 This command is used to configure the shared secret bet ween the RADIUS client and the RADIUS accounting / authentication server. Depending on whether the 'auth' or 'ac ct' token is used, the shared secret will be configured for the R ADIUS auth ...

  • Fujitsu BX600 - page 244

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 243 7.9.4.5 radius-server timeout This command sets the timeout value (in seconds) after which a request must be retransmitted to the RADIUS server if no response is received. The timeout value is an integer in the range of 1 to 30. Syntax radius-server timeout <sec ...

  • Fujitsu BX600 - page 245

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 244 7.9.4.7 radius-server primary This command is used to configure the primary RADIUS authentication server for this RADIUS client. The primary server is the one t hat is used by default for handling RADIUS requests. Th e remaining configured servers are only used if ...

  • Fujitsu BX600 - page 246

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 245 Disabled Command Mode Global Config 7.9.5.2 tacacs mode This command is used to enable/select/disable the T ACACS server administrative mode Syntax t acacs mode <1-3> {master | slave} no t acacs mode <1-3> <1-3> - The valid value of index is 1, 2, ...

  • Fujitsu BX600 - page 247

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 246 Default Setting IP 0.0.0.0 Command Mode Global Config 7.9.5.4 tacacs port This command is used to configure the T ACACS server ’s service port. Syntax t acacs port <1-3> <1-65535> no t acacs port <1-3> <1-65535> - service port (Range: 1 to ...

  • Fujitsu BX600 - page 248

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 247 no - This command is used to remove the T ACACS server secret key . Default Setting None Command Mode Global Config 7.9.5.6 tacacs retry This command is used to configure the T ACACS packet retra nsmit times. Syntax t acacs retry <1-3> <1-9> no t acacs ...

  • Fujitsu BX600 - page 249

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 248 <1-255> - max timeout (Range: 1 to 255). <1-3> - The valid value of index is 1, 2, and 3. no - This co mmand is used to reset the timeout value to the default value. Default Setting 3 Command Mode Global Config 7.9.6 Port Security Configuration Commands ...

  • Fujitsu BX600 - page 250

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 249 Syntax port-security max-dynamic [<0-600>] no port-security max-dynamic no - This command resets the maximum of dynamically locked MAC addresses allowed on a specific port to its default value. Default Setting 600 Command Mode Interface Config 7.9.6.3 port-se ...

  • Fujitsu BX600 - page 251

    S e c u r i t y C o m m a n d s Command Reference Intelligent Blade Panel Module 250 7.9.6.4 port-security mac-address This command adds a MAC address to the list of statically locked MAC addresses. Syntax port-security mac-address <mac-addr> <1-3965> no port-security mac-address <mac-addr> <1-3965> <1-3965> VLAN ID &l ...

  • Fujitsu BX600 - page 252

    S N T P C o m m a n d s Command Reference Intelligent Blade Panel Module 251 7.10 SNTP Commands 7.10.1 Show Commands 7.10.1.1 show sntp This command displays the current time and configuration settings for the SNTP client, and indicates whether the local time has been properly updated. Syntax show sntp Default Setting None Command Mode Privileged E ...

  • Fujitsu BX600 - page 253

    S N T P C o m m a n d s Command Reference Intelligent Blade Panel Module 252 Display Message Client Supported Modes Supported SNTP Modes (Broadcast, Unicast, or Multicast). SNTP Version The highest SNTP version the client supports. Port SNTP Client Port Client Mode: Configured SNTP Client Mode. Unicast Poll Interval Poll interval value for SNTP cli ...

  • Fujitsu BX600 - page 254

    S N T P C o m m a n d s Command Reference Intelligent Blade Panel Module 253 7.10.2.1 sntp broadcast client poll-interval This command will set the poll interval for SNTP broadcast clients in seconds as a po wer of two where <poll-interval> can be a value from 6 to 16. Syntax sntp broadcast client poll-interval <6-10> no sntp broadcast ...

  • Fujitsu BX600 - page 255

    S N T P C o m m a n d s Command Reference Intelligent Blade Panel Module 254 Command Mode Global Config 7.10.2.3 sntp client port This command will set the SNTP client port id and polling interval in seconds. Syntax sntp client port <portid> [<6-10>] no sntp client port <portid> - SNTP client port id. <6-10> - Polling interv ...

  • Fujitsu BX600 - page 256

    S N T P C o m m a n d s Command Reference Intelligent Blade Panel Module 255 Default Setting The default value is 6. Command Mode Global Config 7.10.2.5 sntp unicast client poll-timeout This command will set the poll timeout for SNTP unicast clients in se conds. Syntax sntp unicast client poll-timeout <poll-timeout> no sntp unicast client pol ...

  • Fujitsu BX600 - page 257

    S N T P C o m m a n d s Command Reference Intelligent Blade Panel Module 256 < poll-retry> - Polling retry in seconds. The range is 0 to 1 0. no - This command will reset the poll retry for SNTP unicast clients to its default value. Default Setting The default value is 1. Command Mode Global Config 7.10.2.7 sntp server This command configures ...

  • Fujitsu BX600 - page 258

    System Utilities Command Reference Intelligent Blade Panel Module 257 7.10.2.9 This command sets the time zone for the IBP’s internal clock. Syntax sntp clock timezone <name> <0-12> <0-59> {before-utc | af ter-utc} <name> - Name of the time zone, usually an acronym. (Range: 1-15 characters) <0-12> - Number of hours b ...

  • Fujitsu BX600 - page 259

    System Utilities Command Reference Intelligent Blade Panel Module 258 Command Mode Privileged Exec 7.11.1.2 clear traplog This command clears the trap log. Syntax clear traplog Default Setting None Command Mode Privileged Exec 7.11.1.3 clear eventlog This command is used to clear the event log, which cont ains error messages from the system. Syntax ...

  • Fujitsu BX600 - page 260

    System Utilities Command Reference Intelligent Blade Panel Module 259 Syntax clear logging buffered Default Setting None Command Mode Privileged Exec 7.11.1.5 clear config This command resets the configuration to the factory defaults without powering off the IBP. The IBP is automatically reset when this command is processed. You are prompted to con ...

  • Fujitsu BX600 - page 261

    System Utilities Command Reference Intelligent Blade Panel Module 260 Default Setting None Command Mode Privileged Exec 7.11.1.7 clear mac address table This command clear all dynamic mac address from the mac address table of IBP. Syntax clear mac-addr-t able dynamic Default Setting None Command Mode Privileged Exec 7.11.1.8 clear counters This com ...

  • Fujitsu BX600 - page 262

    System Utilities Command Reference Intelligent Blade Panel Module 261 7.11.1.9 clear port-group This command resets port group configuration parameters and management VLAN parameters to the factory defaults. Syntax clear port-group Default Setting None Command Mode Privileged Exec 7.11.1.10 enable passwd This command changes Privileged EXEC passwor ...

  • Fujitsu BX600 - page 263

    System Utilities Command Reference Intelligent Blade Panel Module 262 Command Mode Privileged Exec 7.11.1.12 clear ip filter This command is used to clear all ip filter entries . Syntax clear ip filter Default Setting None Command Mode Privileged Exec 7.11.1.13 clear dot1x statistics This command resets the 802.1x statistics for the specified port ...

  • Fujitsu BX600 - page 264

    System Utilities Command Reference Intelligent Blade Panel Module 263 7.11.1.14 clear radius statistics This command is used to clear all RADIUS statistics. Syntax clear radius st atistics Default Setting None Command Mode Privileged Exec 7.11.1.15 clear tacacs This command is used to clear T ACACS configuration. Syntax clear t acacs Default Settin ...

  • Fujitsu BX600 - page 265

    System Utilities Command Reference Intelligent Blade Panel Module 264 The command can also be used to download ssh key files as sshkey-rsa, sshkey-rsa2, and sshkey-dsa and http secure-server certificates as sslpem-root, sslpe m- server, sslpem-dhweak, and sslpem-dhstrong. Files upload to PC Syntax copy st artup-config <sourcefilename> <url ...

  • Fujitsu BX600 - page 266

    System Utilities Command Reference Intelligent Blade Panel Module 265 <dest filename> - name of the image file or the script file. <url> - xmodem or tf tp://ipaddr/p ath/file. sshkey-rsa1 - SSH RSA1 Key file. sshkey-rsa2 - SSH RSA2 Key file. sshkey-dsa - SSH DSA Key file. sslpem-root - Secure Root PEM file. sslpem-server - Secure Server ...

  • Fujitsu BX600 - page 267

    System Utilities Command Reference Intelligent Blade Panel Module 266 This command upload or download the pre-login banner file Syntax copy clibanner <url> copy <url> clibanner no clibanner <url> - xmodem or tf tp://ipaddr/p ath/file. no - Delete CLI banner . Default Setting None Command Mode Privileged Exec 7.11.3 delete This com ...

  • Fujitsu BX600 - page 268

    System Utilities Command Reference Intelligent Blade Panel Module 267 Syntax dir [boot-rom | config | opcode [<filename>] ] <filename> - name of the configuration or image file. boot-rom - bootrom. config - configuration file. opcode - run time operation code. Default Setting None Command Mode Privileged Exec Display Message Column Head ...

  • Fujitsu BX600 - page 269

    System Utilities Command Reference Intelligent Blade Panel Module 268 This command is used to specify the file or image used to start up the system. Syntax boot-system {boot-rom | config | opcode} <filename> <filename> - name of the configuration or image file. boot-rom - bootrom. config - configuration file. opcode - run time operation ...

  • Fujitsu BX600 - page 270

    System Utilities Command Reference Intelligent Blade Panel Module 269 Ping on changing parameter value Syntax ping <host> count <0-20000000> [size <32-512>] ping <host> size <32-512> [count <0-20000000>] <ip addr> - an IP address. <0-20000000> - number of pings (Range: 0 - 20000000). Note that 0 means ...

  • Fujitsu BX600 - page 271

    System Utilities Command Reference Intelligent Blade Panel Module 270 Privileged Exec 7.11.9 logging cli-command This command enables the CLI command Logging feature. The Command Logging component enables the IBP to log all Command Line Interface (CLI) commands issued on the system. Syntax Logging cli-command Default Setting None Command Mode Globa ...

  • Fujitsu BX600 - page 272

    System Utilities Command Reference Intelligent Blade Panel Module 271 7.11.11 reload This command resets the IBP without powering it off. Reset means that all network connections are terminated and the boot code executes. The IBP uses the stored configuration to initialize the system. You are prompted to confirm th at the reset should proceed. A su ...

  • Fujitsu BX600 - page 273

    System Utilities Command Reference Intelligent Blade Panel Module 272 <0-1 1> - telnet session ID. all - all telnet sessions. Default Setting None Command Mode Privileged Exec 7.11.14 hostname This command is used to set the prompt string. Syntax hostname <prompt_string> < prompt_string > - Prompt string. Default Setting vty-0 Com ...

  • Fujitsu BX600 - page 274

    D H C P C o m m a n d s Command Reference Intelligent Blade Panel Module 273 7.12 DHCP Commands 7.12.1 ip dhcp restart Submit a DHCP client request. Syntax ip dhcp rest art Default Setting None Command Mode Global Config 7.12.2 ip dhcp client-identifier This commands specifies the DHCP c lient identifier for the IBP. Syntax ip dhcp client-identifie ...

  • Fujitsu BX600 - page 275

    Suppor ted MIBs Usi ng SNMP Intelligent Blade Panel Module 274 8 Using SNMP SNMP (Sim ple Network Management Protocol) is a communication protocol designed specifically fo r managing devices or other elements on a network. Equipment commonly managed with SNMP includes swit c he s, routers and host computers. SNMP is typica lly used to configure the ...

  • Fujitsu BX600 - page 276

    Suppor ted MIBs Using SNM P Intelligent Blade Panel Module 275 8.1 Suppor ted MIBs The standard MIBs are listed in the followin g tabl e. Specifications Public MIB NAME MIB FIles IEEE 802.1x IEEE8021-PAE-MIB dot1x.my IEEE 802.3ad LAG-MIB dot3ad.my RFC 1213 RFC1213-MIB mib-2.my RFC 2011 IP-MIB RFC2011 ip-icmp.my RFC 1493 BRIDGE-MIB bridge.my RFC 164 ...

  • Fujitsu BX600 - page 277

    Suppor ted MIBs Using SNM P Intelligent Blade Panel Module 276 RFC 3814 MPLS-FTN-MIB mpls_ftn.my RFC 2932 IPMROUTE-STD-MIB ipmroute.m y RFC 1354 IP-FORWARD-M IB ipforward.my RFC 2213 INTEGRATED-SERVICES-MIB intserv.my RFC 3291 INET-ADDRESS-MIB inetaddress.my RFC 2933 and RFC 3019 MGMD -STD-MIB igmp.my RFC 1573 IANAifType-MIB iftype.my RFC 2677 IANA ...

  • Fujitsu BX600 - page 278

    Accessing MIB Object s Using SNMP Intelligent Blade Panel Module 277 8.2 Accessing MIB Objects MIB objects represent f eatures of the IBP that an SNMP application can control and manage. One e xample is the RFC-2233 IF-MIB group which you can use to get or set the por t configuration by reading or writing to diff erent var i abl es in this MIB grou ...

  • Fujitsu BX600 - page 279

    Accessing MIB Object s Using SNMP Intelligent Blade Panel Module 278 ifOutOctets Ye s RO ifOutUcastPkts Ye s RO ifOutNUcastPkts Ye s RO ifOutDiscards NO RO ifOutErrors Ye s RO ifOutQLen NO RO ifS pecific NO RO ifXT able Index: ifIndex ifName Ye s RO ifInMulticastPkt s Ye s RO ifInBroadcastPkts Ye s RO ifOutMulticastPkts Ye s RO ifOutBroadcastPkts Y ...

  • Fujitsu BX600 - page 280

    Accessing MIB Object s Using SNMP Intelligent Blade Panel Module 279 ifS tackT able Indicies: ifS t ackHigherLayer ifS t ackLowerLayer ifS tackS t atus No RC ifRcvAddressT able Indicies: ifIndex ifRcvAddressAddress ifRcvAddressS t atus No RC ifRcvAddressT ype No RC i f Te s t Ta b l e Index: ifT estId ifT estS t atus No RW ifT estT ype No RW ifT es ...

  • Fujitsu BX600 - page 281

    Suppor ted Tr a p s Using SNM P Intelligent Blade Panel Module 280 8.3 Suppo r ted Tr a p s SNM P traps suppor ted include the foll owing items : RFC No. Titl e RFC 1215 coldStar warmStart l inkDown l inkUp authentica tionF ai lure RFC 1493 ne wRoot topolo g yChange RFC 2819 risingAlarm f allingAlarm ...

  • Fujitsu BX600 - page 282

    T h e o v e r v i e w s y s t e m d e f a u l t s e t t i n g s Default Settings Intelligent Blade Panel Module 281 9 Default Settings 9.1 The overview system default settings The default settings for the system module are shown in the following table. Management CLI s erial port / telnet / ssh HTTP Java Applet / SSL3.0 , TLS 1.0 SNMP v1/v2c/v3 Ent ...

  • Fujitsu BX600 - page 283

    The default settings for all the configuration command s Default Settings Intelligent Blade Panel Module 282 SSL HTTP Mode (Secure): Disabled Secure Port: 443 Secure Protocol Level(s): TLS1 SSL3 802.1X Port Authent. disable RADIUS Client disable IGMP Snoopi ng disable 802.3ad enable SNTP Client disable TACACS disable StormControl enable Link State ...

  • Fujitsu BX600 - page 284

    The default settings for all the configuration command s Default Settings Intelligent Blade Panel Module 283 Ip ip javamode ip dhcp client-identifier text Default (system clear config : ip dhcp client-id entifier hex <MAC address>) no ip http secure-server ip http secure-protocol TLS1 SSL3 ip http secure-port 443 ip http server no ip ssh ip s ...

  • Fujitsu BX600 - page 285

    The default settings for all the configuration command s Default Settings Intelligent Blade Panel Module 284 tacacs no t acacs tacacs port 1 49 no tacacs key 1 no tacacs server-ip 1 tacacs timeout 1 3 tacacs retry 1 5 no tacacs mode 1 tacacs port 2 49 no tacacs key 2 no tacacs server-ip 2 tacacs timeout 2 3 tacacs retry 2 5 no tacacs mode 2 tacacs ...

  • Fujitsu BX600 - page 286

    The default settings for all the configuration command s Default Settings Intelligent Blade Panel Module 285 lacp no lacp dot1x dot1x port-control auto no dot1x re-authentication dot1x timeout quiet-period 60 dot1x timeout reauth-period 3600 dot1x timeout supp-timeout 30 dot1x timeout tx-period 30 dot1x timeout server-timeout 30 dot1x max-req 2 sto ...

  • Fujitsu BX600 - page 287

    Dia gnosing IBP Indicator s T rou b leshooti ng and Tip s Intelligent Blade Panel Module 286 10 T r oub leshooting and Tip s If you are having problems connecting to the network, check your network ca bling to ensure that the de vice in question is properly connected to the network. Then ref er to ve r i f y that the corresponding por t on the IBP ...

  • Fujitsu BX600 - page 288

    Accessing th e Management Interface T rou bl eshooti ng and Tip s Intelligent Blade Panel Module 287 10.2 Accessing th e Manage ment Interface Yo u can access the management interf ace fo r the IBP from anywhere within the attached network using T elnet, a Web browser , or any SNMP-based network management soft wa re. If you are havi ng trouble acc ...

  • Fujitsu BX600 - page 289

    Information on this document On Apr il 1, 2 009, Fuj itsu became the so le owner of F ujitsu S iemens Compu- ters. This new subsidi ar y of Fuj itsu has been renam ed Fujitsu T echnology So- lutions. This do cument from the document archive refers to a pr oduct version wh ich was release d a co nsiderable time ag o or whic h is no l onger ma rketed ...

Fabricante Fujitsu Categoría Server

Los documentos del dispositivo Fujitsu BX600 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Fujitsu
- manuales de instrucciones BX600
- hojas de producto Fujitsu
- folletos informativos
- o etiquetas energéticas Fujitsu BX600
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Fujitsu BX600.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Fujitsu BX600, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Fujitsu BX600. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Fujitsu BX600.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Fujitsu BX600, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Fujitsu BX600. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Fujitsu BX600.

El manual de instrucciones completo de Fujitsu debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Fujitsu BX600 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Fujitsu BX600, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Fujitsu BX600 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Fujitsu BX600 - que deben facilitarnos los primeros pasos durante el uso de Fujitsu BX600
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Fujitsu BX600
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Fujitsu BX600 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Fujitsu BX600?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Fujitsu BX600, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Fujitsu BX600 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)