-
BIXOLON SRP-770II - page 1
User's Manual SRP-770II Label Printer Rev . 1.14 http://www .bixolon.com ...
-
BIXOLON SRP-770II - page 2
Rev . 1.14 - 2 - SRP-770II ■ T able of Content s Manual Information & Usage Precautions ※ ·································································· 3 1. Content C onfirmation ·············································· ...
-
BIXOLON SRP-770II - page 3
Rev . 1.14 - 3 - SRP-770II ■ Manual Information ※ Manual Informatio n & Usage Precautions This user manual contains basic information for product usage as well as for emergency measures that may be required. The following separate manuals provide more det ailed content on various t ※ echnological issues and areas. 1. Windows Driver Manual ...
-
BIXOLON SRP-770II - page 4
Rev . 1.14 - 4 - SRP-770II ■ Safety Precautions In using the present appliance, please keep the following safety regul ations in order to prevent any hazard or material damage. W ARNING Violating following instructions c an cause serious injury or death. Do not bend the cable b y force or leave it under any heavy objec t. • A damaged cable can ...
-
BIXOLON SRP-770II - page 5
Rev . 1.14 - 5 - SRP-770II CAUTION Violatin g following instructions c an cause slight wo und or damage the app liance . Do not use the printer when it is out of order . This can cause a fire or an electro cution. • Switch off and unplug the printer before calling your dealer . Do not let water or othe r foreign object s in the printer . • If t ...
-
BIXOLON SRP-770II - page 6
Rev . 1.14 - 6 - SRP-770II ■ Other Precautions The copyright for this user manual and various other manuals is pr operty of the BIXOLON Co., Ltd. Any copying or conversion into electronic firm and saving of this material without the express written permi ssion of BIXOLON Co., Ltd. is strictly prohibited. Use of the information contained in this m ...
-
BIXOLON SRP-770II - page 7
Rev . 1.14 - 7 - SRP-770II 1. Content Confirmation The following items should all be c ontained in the printer p ackage. Contact the dealer from which the purchas e was made if any it em is damaged and/or missing. SRP-770II Paper Power Cord AC Adapter Cleaning Pen CD User ’ s Manual ※ Optiona l items RS-232C(Serial) Cable IEEE1284 (Parallel) Ca ...
-
BIXOLON SRP-770II - page 8
Rev . 1.14 - 8 - SRP-770II 2. Product Part Names Feed Button Cover Peel-of f Cover Lever Printer Head Paper Holder Paper Guide Peel-off Senso r Paper Gap Senso r Paper Cover Power Switch ...
-
BIXOLON SRP-770II - page 9
Rev . 1.14 - 9 - SRP-770II S A MS UNG L A B E L P R N T E R Dip Switch Auto Cutter (Option) IEEE1284 Receptacle USB Receptacle Fan-Fold Power Receptacle RS-232C Receptacle ...
-
BIXOLON SRP-770II - page 10
Rev . 1.14 - 10 - SRP-770II 3. Inst allation & Usage 3-1 Power Connection Connect power to the prin ter as shown below . 1) T urn off the printer power switch. 2) Check to see that the AC adapter voltage matches that of the power source. 3) Connect the AC adapter jack to the printer power connector . 4) Connect the power cord to the AC adapter ...
-
BIXOLON SRP-770II - page 11
Rev . 1.14 - 1 1 - SRP-770II 3-2 Interface Cable Connection Connect the interface cable as shown below . This printer supports the following communications interface st andards. - RS-232C (Serial) - IEEE1284 (Parallel) - USB 1) T urn off the power switch. 2) Connect the interface cable to the printer interface connector . - For a Serial cable, secu ...
-
BIXOLON SRP-770II - page 12
Rev . 1.14 - 12 - SRP-770II 3-3 Paper Installation 1) Open the Paper Cover . 2) S pread the paper holder and insert paper as shown. S A M S U N G L A B E L P R I N T E R 3) Keep note of paper printing direction. 4) Adjust the paper guide to the wid th of the paper . S A M S U N G L A B E L P R I N T E R 5) Close the Paper Cover . ...
-
BIXOLON SRP-770II - page 13
Rev . 1.14 - 13 - SRP-770II 3-4 LED Display Feed button Paper feed or cancel the print job. LED The current printer st atus can be viewed. (Refer to below) The current printer status can be viewed via the printer ’ s LED display . 1) Green LED on - The printer wait s for the data from Host (PC) in normal mode. 2) Orange LED on - It means paper ga ...
-
BIXOLON SRP-770II - page 14
Rev . 1.14 - 14 - SRP-770II 4. Self-T est The self-test checks whether t he printer has any problems. (Users cannot perform this procedure if using the printer ’ s label peel-of f option.) If the printer does not function pr operly , contact an authorized dealer . The self-test checks the following; 1) Make sure that the paper roll has been inst ...
-
BIXOLON SRP-770II - page 15
Rev . 1.14 - 15 - SRP-770II 5. Fine T uning 5-1 Printer Settings with Dip switches The dip switches are located on the bottom of the printer. The dip switches are used to set the printer to perform various functions. Follow these steps when changing dip switch settings: 1) Turn the printer power switch off. 2) Remove the screw on the bottom of the ...
-
BIXOLON SRP-770II - page 16
Rev . 1.14 - 16 - SRP-770II [T able 1] Dip Switch 1 No Functions Details Off 4.0 ips 1-1 S peed Selection On 5.0 ips 4 3 2 Density Off Of f Of f 13 Off Of f On 14 Off On Of f 15 Off On On 16 On Off Of f 17 On Off On 18 On On Off 19 1-2 1-3 1-4 Density Selection On On On 20 Off Normal Mode 1-5 Exhibition Selection On Demo Mode Off Label Paper 1-6 Me ...
-
BIXOLON SRP-770II - page 17
Rev . 1.14 - 17 - SRP-770II 5-3 Gap Sensor Auto-Calibration Gap sensor auto-calibration is used when the pr inter does not detect a gap on the label paper correctly . Generally a printer is set to detect most of gap types but some times it fails to detect and keep feeding the paper without a stop when spec ial paper used. In such case, use gap sens ...
-
BIXOLON SRP-770II - page 18
Rev . 1.14 - 18 - SRP-770II 5-4 Gap Sensor Manual-Calibration Manual-calibration of media detection can be us ed when the printer cannot detect a media gap (or black mark) even after auto-calibration has been executed. Users can calibrate sensor parameters in det ail by using the utilit y program provided by the manufacturer . The utility can be ob ...
-
BIXOLON SRP-770II - page 19
Rev . 1.14 - 19 - SRP-770II 5-5 The Peel-Off This function is used to automatically separate labels from the liner . - The peeler is for Label Paper only . - When the peeler switch is on, labels are not printed if previous printed labels have been removed from the peeler . - When the peeler function is not required, turn the peeler switch of f. Kee ...
-
BIXOLON SRP-770II - page 20
Rev . 1.14 - 20 - SRP-770II 3) Adjust the paper gui des and close the cover . 4) T urn the printer off and back on. ...
-
BIXOLON SRP-770II - page 21
Rev . 1.14 - 21 - SRP-770II 5-6 Using Fan-Fold Paper Insert paper through both the rear slot and guides. Adjust holders and guides to the width of the p aper . 1) Open the Dust Cover and insert paper . O P E N 2) Adjust Paper Holders to the paper wid th and fixed Paper Holders with fixing tool. 3) Adjust Paper Guides and close the Paper Cover . Dus ...
-
BIXOLON SRP-770II - page 22
Rev . 1.14 - 22 - SRP-770II 5-7 Auto Cutter (option) Auto cutter should be used for conti nuous paper only . ( i.e. roll paper) 1. Open the Dip switch cover , and make the switch 1 number 7 “On”. (Refer to printer mode setting at Chapter 5-1.) 2. Put a paper roll into the printer and close the cover . S A M S U N G L A B E L P R N T E R ※ CAU ...
-
BIXOLON SRP-770II - page 23
Rev . 1.14 - 23 - SRP-770II 6. Cleaning Head Paper dust on the heating elements may lower the printer quality. When dirty, clean the print head as follows: ※ CAUTION - Make sure to turn the prin ter power off prior to cleaning. - As the print head gets very hot during prin ting, if intending to clean the print head, turn the printer power off and ...
-
BIXOLON SRP-770II - page 24
Rev . 1.14 - 24 - SRP-770II 7. Appendix 7-1 Specifications Item Description Printing Method Thermal T ransfer / Direct Thermal Printing Dot Density 203 dpi (8 dot/mm) Printing Width 25.4 ~ 104 mm Printer Printing S p eed 127 mm/sec Roll 38.1 ~ 106mm Paper Fan-Fold T ype 45 ~ 1 12 mm SMPS Input V oltage AC 100~240V Frequency 50/60 Hz AC Adapter SMPS ...
-
BIXOLON SRP-770II - page 25
Rev . 1.14 - 25 - SRP-770II 7-2 Certification 1) EMC & Safety S tandards • Europe: CE EMC,CB-Scheme:IE C60950-1, GS: EN60950-1: 2001 • North America: FCC rules p arts 15B WARNING Use of an unprotected interface cable with th is printer conflicts with EMC st andards. Users should only use cables approved by BIXOLON. 2) CE Mark • EMC Direct ...
¿Tienes una pregunta acerca de BIXOLON SRP-770II?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con BIXOLON SRP-770II, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con BIXOLON SRP-770II probablemente compartirá una forma de solucionarlo.