-
Life Fitness OHDPR9 - page 1
OL YMPIC HEA VY DUTY POWER RACK 9 ’ (OHDPR9) Part # 7671001 Rev . A Revision:12/10/03 1 ASSEMBL Y INSTRUCTIONS ...
-
Life Fitness OHDPR9 - page 2
P AR TS LIST PA R T # LEA 7586101 LEA 7586501 LEA 7656601 LEA 7656901 LEA 7585801 LEA 7586601 LEA 7586901 LEA 7588301 LEA 7584401 LEA 7584501 LEA 7587501 LEA 7587901 LEA 7587801 LEA 7589201 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 QTY 1 1 2 2 2 2 1 1 2 2 10 1 1 2 KEY 15 16 17 18 19 20 21 22 23 24 25 26 27 PA R T # LEA 7596501 LEA 3239318 LEA 3239306 LE ...
-
Life Fitness OHDPR9 - page 3
3 17 1/2 X 1-1/2” BOL T 16 1/2 X 4-1/2” BOL T 21 3/8” INT TOOTH LOCK W ASHER 20 1/2” INT TOOTH LOCK W ASHER 26 1/2 X 4-1/4” BOL T 18 3/8 X 3-3/4” FLA T HEAD BOL T 24 3/8” LOCK NUT 23 1/2” LOCK NUT 19 1/2” FLA T W ASHER 22 1/2” PLASTIC DOME W ASHER ...
-
Life Fitness OHDPR9 - page 4
STEP 1: FIGURE 1 4 • LOOSEL Y assemble the REAR UPRIGHT (4) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4” BOL TS (26), two 1/2” PLASITC DOME W ASHERS (22), two 1/2” INT TOOTH LOCK W ASHERS (20) and two 1/2” LOCK NUTS (23) as shown in FIGURE 1. 23 4 4 26 1/2 X 4-1/4” 2 20 1 22 • LOOSEL Y assemble the REAR UPRIGHT (4) to the RIGHT ...
-
Life Fitness OHDPR9 - page 5
5 STEP 2: FIGURE 2 • LOOSEL Y assemble the BOTT OM UPRIGHT SUPPOR T (15) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOL TS (26), four 1/2” PLASITC DOME W ASHERS (22), four 1/2” INT TOOTH LOCK W ASHERS (20) and four1/2” LOCK NUTS (23) as shown in FIGURE 2. 4 26 1/2 X 4-1/4” 22 4 15 20 23 Use this set of holes for assembly with PLA ...
-
Life Fitness OHDPR9 - page 6
6 STEP 3: FIGURE 3 • LOOSEL Y assemble the FRONT UPRIGHT (3) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4” BOL TS (26), two 1/2” PLASITC DOME W ASHERS (22), two 1/2” INT TOOTH LOCK W ASHERS (20) and two 1/2” LOCK NUTS (23) as shown in FIGURE 3. 23 3 3 26 1/2 X 4-1/4” 2 20 1 22 • LOOSEL Y assemble the FRONT UPRIGHT (3) to the RIG ...
-
Life Fitness OHDPR9 - page 7
7 STEP 4: FIGURE 4 7 • LOOSEL Y assemble the REAR UPPER SUPPOR T (7) and the CROSS SUPPOR TS (5) to the REAR UPRIGHTS (4) using four 1/2 X 4- 1/2” BOL TS (16), eight 1/2” INT TOOTH LOCK W ASHERS (20) and four 1/2” LOCK NUTS (23) as shown in FIGURE 4. 4 5 3 • LOOSEL Y assemble the CROSS SUPPOR TS (5) to the FRONT UPRIGHTS (3) using two 1/2 ...
-
Life Fitness OHDPR9 - page 8
8 STEP 5: FIGURE 5 • LOOSEL Y assemble the CHIN-UP SUPPOR T (8) to the CROSS SUPPOR TS (5) and the FRONT UPRIGHTS (3) using two 1/2 X 4-1/2” BOL TS (16), two 1/2 X 4-1/4” BOL TS (26), six 1/2” INT T OOTH LOCK W ASHERS (20), two 1/2” PLASTIC DOME W ASHERS (22) and four 1/2” LOCK NUTS (23) as shown in FIGURE 5. 8 22 23 20 5 3 5 1/2 X 4-1/ ...
-
Life Fitness OHDPR9 - page 9
9 STEP 6: FIGURE 6 • LOOSEL Y assemble the WEIGHT HORN UPRIGHTS (6) to the LEFT & RIGHT UPRIGHT BASE (1 & 2) using four 1/2 X 4-1/4” BOL TS (26), four 1/2” PLASTIC DOME W ASHERS (22), four 1/2” INT TOOTH LOCK W ASHERS (20) and four 1/2” LOCK NUTS (23) as shown in FIGURE 6. 20 22 1/2 X 4-1/4” 26 6 23 4 6 26 1/2 X 4-1/4” 1 2 20 ...
-
Life Fitness OHDPR9 - page 10
10 STEP 7: FIGURE 7 • Securely tighten all loose frame connections made to this point. TIGHTEN! TIGHTEN! TIGHTEN! TIGHTEN! ...
-
Life Fitness OHDPR9 - page 11
11 STEP 8: FIGURE 8 • LOOSEL Y assemble one RIGHT & one LEFT ADJUSTMENT RACK (9 & 10) to the REAR UPRIGHTS (4) as shown, using eight 3/8 X 3-3/4” FLA T HEAD BOL TS (18), eight 3/8” INT T OOTH LOCK W ASHERS (21) and eight 3/8” LOCK NUTS (24). See FIG- URE 8. 21 3/8 X 3-3/4” 18 24 3 10 9 10 4 3 9 4 • LOOSEL Y assemble one RIGHT &a ...
-
Life Fitness OHDPR9 - page 12
12 STEP 9: FIGURE 9 • SECUREL Y assemble the ten WEIGHT HORNS (1 1) to the WEIGHT HORN UPRIGHTS (6) using twenty 1/2 X 4-1/4” BOL TS (26), twenty 1/2” INT TOOTH LOCK W ASHERS (20), twenty 1/2” PLASTIC DOME W ASHERS (22) and twenty 1/2” LOCK NUTS (23) as shown in FIGURE 9. 1/2 X 4-1/4” 26 20 11 6 6 22 ...
-
Life Fitness OHDPR9 - page 13
13 STEP 10: FIGURE 10 • Assemble two SWIVEL SPOTTERS (25) to the BOTTOM UPRIGHT SUPPOR T (15) as shown using four 1/2 X 1-1/2” BOL TS (17), four 1/2” FLA T W ASHERS (19), four 1/2” INT TOOTH LOCK W ASHERS (20) and four 1/2” LOCK NUTS (23). See FIGURE 10. (NOTE: Tighten connection SECUREL Y then back nut off 1/2 turn.) 17 1/2 X 1-1/2” 20 ...
-
Life Fitness OHDPR9 - page 14
14 STEP 1 1: FIGURE 1 1 • Insert the LEFT BAR SUPPOR T (12) into the desired slots of the LEFT ADJUSTMENT RACK (10), and allow it to drop down to lock in place. See FIGURE 11. 10 13 12 • Repeat the above step to assemble the RIGHT BAR SUPPOR T (13) to the RIGHT ADJUSTMENT RACK (9). 9 27 4 4 2 1 • Insert fourteen 9/16” HOLE CAPS (27) into th ...
-
Life Fitness OHDPR9 - page 15
15 STEP 12: FIGURE 12 • Insert the BAR CA TCHES (14) into the desired slots on the LEFT & RIGHT ADJUSTMENT RACKS (10 & 9), and allow it to drop down and lock into place. See FIGURE 12. 14 9 10 14 Thank you for pur chasing the OL YMPIC HEA VY DUTY POWER RACK. If unsure of proper use of equipment, call your local Hammer S trength distributo ...
-
Life Fitness OHDPR9 - page 16
Clean: • Upholstery with mild soap and water . • Guide rods with a cotton cloth. • Hand grips with mild soap and water . • Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer service representative. Inspect: • Cables for wear or damage and proper tension (should not exceed 3/4” deflection ...
¿Tienes una pregunta acerca de Life Fitness OHDPR9?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Life Fitness OHDPR9, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Life Fitness OHDPR9 probablemente compartirá una forma de solucionarlo.