-
Electrolux SIG 233 - page 1
GAS COOKER SIG 233 GB GAS COOKER CSIG 231 ...
-
Electrolux SIG 233 - page 2
2 ...
-
Electrolux SIG 233 - page 3
3 CONTENTS Instructions for the User Inst ructions for the Installer Warnings Use and care Use of the appliance Using the Oven Using the Grill Using the Hob Hints and tips Maintenance and cleaning Oven bulb replacement Something Not Working Service and spare parts Guarantee Conditions 4 5 6 6 7 9 11 12 13 14 15 16 Technical Features Advice for safe ...
-
Electrolux SIG 233 - page 4
4 IMPORTANT SAFETY INFORMATION Installation • This cooker must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. • This cooker is heavy. Take care when moving it. • Any gas installation must be carried out by a registered CORGI installer. • Any electrical installation ...
-
Electrolux SIG 233 - page 5
5 INSTRUCTIONS FOR THE USER USE AND CARE Control panel Model : CSIG 231 3 24 6 1 BACK LEFT FRONT L EFT FRONT RI GHT BACK RIGHT SELECTOR 5 7 1. Back left burner control knob 2. Front left burner control knob 3. Front right burner control knob 4. Back right burner control knob 5. Oven light 6. Oven/Grill burner control knob (selector) 7. Ignition swi ...
-
Electrolux SIG 233 - page 6
6 USE OF APPLIANCE Before the First Use of the Cooker Remove all packaging both inside and outside of the cooker, before using it. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1. Remove the oven accessories and ensure all packaging has been removed. 2. Ignite t ...
-
Electrolux SIG 233 - page 7
7 Ignition • Open the oven door, push and turn the control knob to the left to position 8, and hold a flame near the hole in the bottom; • Release the knob after 10 seconds and check that the burner is ignited through the holes in the burner cover. If for any reason the flame should extinguish turn the control knob to the off position, after at ...
-
Electrolux SIG 233 - page 8
8 If for any reason the flame should extinguish turn the control knob to the " " position, leave for at least 1 minute and then re-ignite. The grill pan will become hot during use, always use oven gloves when removing or replacing a hot grill pan, or the grill pan handles if provided. Grilling When using the grill it has to be supervised, ...
-
Electrolux SIG 233 - page 9
9 Using the Hob The Hob Burners The symbol on the control panel shows which burner is operated by the knob. (See control panel). Off Maximum level Minimum level Use the maximum level for boiling and the minimum for simmering. Always choose positions between the minimum and maximum, never between maximum and off. Ignition of the burners • Push the ...
-
Electrolux SIG 233 - page 10
10 For a correct ignition always keep the burner ring and the spark plugs clean. The following diameter pans can be used: Burner Power Diameter (mm) (kW) min. max. Rapid 3,00 160 280 Semi- Rapid 2,00 140 240 Auxiliary 1,00 120 180 Accessories delivered with the appliance The following accessories are supplied with your appliance. • Grill Deflecto ...
-
Electrolux SIG 233 - page 11
11 Hints and Tips Condensation and steam When food is heated it produces steam in the same way as a boiling kettle. The oven vents allow some of this steam to escape. However, alw ays stand back from the ov en w hen opening the oven door to allow any build up of steam or heat to release. If the steam comes into contact with a cool surface on the ou ...
-
Electrolux SIG 233 - page 12
12 MAINTENANCE AND CLEANING The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire. Before cleaning, ensure all control knobs are in the OFF position, and the appliance has cooled completely. Before any maintenance or cleaning can be carried out, you must DISCONNECT the cooker from the electricity ...
-
Electrolux SIG 233 - page 13
13 Hob After every use wipe with a soft cloth well wrung out in warm water to which a little washing up liquid has been added, avoiding any leakage through the holes of the hob. Rinse and dry with a soft cloth. To remove more stubborn stains, wet and leave to dissolve, do not scratch and avoid the use of abrasive or caustic products that could dama ...
-
Electrolux SIG 233 - page 14
14 SOMETHING NOT WORKING If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Force Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge w ill be made even if the appliance is under guarantee. S ...
-
Electrolux SIG 233 - page 15
15 SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 08705 929929 Your telephone call will be automatically routed to t he Service Force Centre covering your post code area. For the address of your local Service Force C en ...
-
Electrolux SIG 233 - page 16
16 GUARANTEE CONDITIONS Standard Guarantee Conditions We Pa rki nso n Cow an undertake that if, within 12 mont hs of the date of the purchase, this P ar kin son Co wan appliance or any part thereof is proved to be defective by any reason only of faulty workmanship or materials, we will, at our opti on, repair or replace the same FREE OF ANY CHARGE ...
-
Electrolux SIG 233 - page 17
17 INSTRUCTIONS FOR THE INSTALLER TECHNICAL FEATURES Free standing Class 1 Hob Pan support Front right burner Back right burner Front left burner Back left burner Hob ignition Enamelled Semi-Rapid Semi-Rapid Rapid Auxiliary 2000 W 2000 W 3000 W 1000 W Spark Oven Oven Oven burner power Grill Grill burner power Oven lamp Cleaning Gas 3000 W Gas 2000 ...
-
Electrolux SIG 233 - page 18
18 ADVICE FOR SAFETY Gas connections • Before installation ensure that the local distribution conditions (gas type and pressure) and the pre-setting of the appliance are consistent. • This appliance must be installed only in a room with good ventilation. • This appliance must not connected to a chimney. It has to be installed and connected in ...
-
Electrolux SIG 233 - page 19
19 Electrical connections Any electrical work required to install this cooker should be carried out by a qualified electrician or competent person, in accordance w ith the current regulations. THIS COOKER MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. This cooker is designed to be connected to ...
-
Electrolux SIG 233 - page 20
20 INSTALLATION Positioning Remove all the packaging and install the cooker in a dry, ventilated room not near curtains, paper, alcohol, petrol etc (See figure). The appliance must be set on a heatproof floor. The adjustable feet must not be removed. L.P.G. cookers or ovens MUST NOT be installed below ground level, i.e. in a basement, or aboard any ...
-
Electrolux SIG 233 - page 21
21 Levelling The appliance is provided with adjustable small feet placed in the back and front corners of the base. By adjusting the small feet it is possible to change the height of the appliance so as to ensure a better levelling with other surfaces and a uniform distribution of the liquids contained in pans or pots. GAS CONNECTIONS Gas connectio ...
-
Electrolux SIG 233 - page 22
22 Connection shall be by means of an appliance flexible connector for use with a self-sealing plug- in device, complying with: Flexible hoses, end fittings and sockets for gas burning appliances – BS 669; - The appliance flexible connector should not be subjected to undue forces either in normal use or whilst connected or disconnected; The socke ...
-
Electrolux SIG 233 - page 23
23 CONVERSION OF GAS Your cooker is designed to work with natural gas, and is convertible for use witth propane or butane. The LPG conversion kit is available from your Service Force Centre and must be fitted by a Corgi Registered engineer. For changing the gas type it is necessary to: • replace the nozzles (hob, oven and grill); • adjust the m ...
-
Electrolux SIG 233 - page 24
24 Replace the nozzles of the hob burners Before any modifications or conversion to a kind of different gas, y ou must DISCONNECT the cooker from the electricity supply and ensure that all control knobs are in the OFF position, and the appliance has cooled completely. Hob burners • Remove the pan supports; • Remove the caps and the burner crown ...
-
Electrolux SIG 233 - page 25
25 Replace the nozzles of the oven burners Oven burner To replace the gas oven nozzle, follow this procedure: • Check the table no.1 for diameter of nozzle; • Remove the oven removable base panel; • Remove the screw 1 on the oven burner • Remove the oven burner by pulling it forwards. • Replace the nozzle by means of a No 7 socket spanner ...
-
Electrolux SIG 233 - page 26
26 ...
-
Electrolux SIG 233 - page 27
27 ...
-
Electrolux SIG 233 - page 28
28 Customer Care Department Parkinson Cowan 55-77 High Street Slough Berkshire SL1 1DZ Tel: 08705 950 950 CSIG231 - 342737935 © Electrolux plc 2003 From the Electro lux Group . T he world’s N o.1 choice The Electrolux Group is the world’s lar gest producer of powered appliances for ki tchen, cleaning and outdoor use. More than 55 million Elect ...
¿Tienes una pregunta acerca de Electrolux SIG 233?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Electrolux SIG 233, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Electrolux SIG 233 probablemente compartirá una forma de solucionarlo.