-
Pinnacle ProKeys 88 - page 1
3 Pro Keys 88 • User Guide English Intr oduction Congratulations on your purchase of the M-Audio ProKeys 88, the complete all-purpose live stage piano, with additional MIDI control. We strongly recommend that you read through this manual to learn about proper installation, operation and advanced functionality before using this product. What’ s ...
-
Pinnacle ProKeys 88 - page 2
4 Perfor mance Tips The ProKeys 88 is capable of some very expressive and fl exible sound combinations. Through layering and splitting the instrument sounds (which are described on pages 10-11 of this manual), and also transposing and adjusting volumes and applying effects, you can create some ver y unique performances. 10 examples are provided th ...
-
Pinnacle ProKeys 88 - page 3
5 Pro Keys 88 • User Guide English Minimum System Requir ements The ProKeys 88 is a stand-alone premium stage piano, which is also capable of being used as a MIDI controller with your compatible computer software.I If you are using your ProKeys 88 with a computer the following minimum system requirements apply: PC: Mac: < USB 1.0 port < USB ...
-
Pinnacle ProKeys 88 - page 4
6 1 Power Switch (On/Off) 2 DC Power Supply Connector Plug – accepts a 12V DC power supply , center positive, 500mA 3 USB 1.0 Port – accepts a standard USB cable 4 MIDI Out Port – accepts a standard 5-pin DIN type MIDI cable 5 MIDI In Port – accepts a standard 5-pin DIN type MIDI cable 6 2 Foot Switch Inserts – accept standard switch-type ...
-
Pinnacle ProKeys 88 - page 5
7 Pro Keys 88 • User Guide English PLEASE NOTE : Y ou cannot connect your new MIDI controller to your computer until the appropriate driver files have been copied to your computer . 1 Insert the Stage Piano Series CD-ROM into your computer’ s CD-ROM drive. 2 The computer will automatically display the interactive menu. If your computer fails t ...
-
Pinnacle ProKeys 88 - page 6
8 MIDI Connections The MIDI connections allow you to connect external MIDI equipment such as synthesizers, tone modules and sequencers. The MIDI In jack can be used to connect a secondar y MIDI device to a computer , with your ProKeys 88 effectively acting as a USB-to-MIDI interface. T o use this feature, the ProKeys 88 must be connected to a compu ...
-
Pinnacle ProKeys 88 - page 7
9 Pro Keys 88 • User Guide English Expression Pedal Connection (An Expression Pedal is not included with the product). The Expression Pedal plug allows connection of a continuous controller - type pedal. Normally , these pedals are referred to as ‘Expression Pedals’ or ‘Volume Pedals.’ This pedal can be used to vary the overall volume of ...
-
Pinnacle ProKeys 88 - page 8
10 Split Button The Split Button will split the keyboard to allow 2 different instruments to be assigned to two non-overlapping adjacent regions and played at the same time. When this button is pressed, the LED above it will light up. The default left hand instrument will be Acoustic Bass (Sound 13). When Split Mode is engaged, the LED above the A ...
-
Pinnacle ProKeys 88 - page 9
1 1 Pro Keys 88 • User Guide English Octave/T ranspose/Master T uning When pressed separately , these two Octave/T ranspose buttons are used to transpose the keyboard by a semi-tone with a maximum of 12 notes up or down from 0. If pressed together , they will alter the octave range of the keyboard (skips 12 notes per press). The maximum Octave Sh ...
-
Pinnacle ProKeys 88 - page 10
12 The numbers are as follows: 91 – Reverb Level 92- Reverb T ype Select (0,1, 2) 93 – Chorus Level 94 – Chorus T ype Select (0, 1) Digital effects are sent out over MIDI, using controller messages 91 for reverb, and 93 for chorus Because ProKeys always sends the current effect values, it can be used to control the reverb/chorus amount in any ...
-
Pinnacle ProKeys 88 - page 11
13 Pro Keys 88 • User Guide English MIDI Clock Buttons The four MIDI Clock Buttons (from left to right respectively) are Start, Stop and the two T empo buttons, ‘-’ and ‘+.’ These buttons allow you to control any MIDI-connected external MIDI sequencer . For this to be possible, you need to set your external sequencer to “slave mode” t ...
-
Pinnacle ProKeys 88 - page 12
14 Pr ogram/Bank Changes Explained The original GM or “General MIDI” specifi cation allowed for only 128 voices, numbered from 0-127. It is possible to access any of these different voices by sending a Program Change Message. In order to expand on the GM set of voices, Bank Changes were devised. Each bank contains 128 patches, which can be acc ...
-
Pinnacle ProKeys 88 - page 13
15 Pro Keys 88 • User Guide English If you are experiencing clipping or distortion: • T urn the volume faders down. Y ou may be overloading the device you have connected the ProKeys 88 to. • If you are recording the audio from your ProKeys 88 on a computer , the distortion may be due to the audio settings of your computer’ s sound card. Thi ...
-
Pinnacle ProKeys 88 - page 14
16 T echnical Info Caution: Electro Static Discharge, Electrical Fast T ransient and Conducted RF interf erence may c ause the un it malfunctioning. In such case, unplug the unit and plug it in again to restore normal operation. Note : Y our M-Au dio ProKey s 88 has been tested to compl y with FCC Standa rds FOR HOME OR OFFI CE USE . Modifi cat io ...
-
Pinnacle ProKeys 88 - page 15
17 Pro Keys 88 • User Guide English Appendices Appendix A MIDI Implementation Chart for the ProKeys 88 Basic :Default Channel:Changed 1-16 1-16 0 :Default Mode :Messages :Altered ---- ----- X ********* 0 Note Number:True V oice 0-127 ******* ...
-
Pinnacle ProKeys 88 - page 16
18 Appendix B GM Program Numbers in Bank 0 ? ...
¿Tienes una pregunta acerca de Pinnacle ProKeys 88?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Pinnacle ProKeys 88, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Pinnacle ProKeys 88 probablemente compartirá una forma de solucionarlo.