-
Sennheiser EK 3041-U - page 1
27 EK 3041-U Instructions for use Diversity Receiver ...
-
Sennheiser EK 3041-U - page 2
28 Thank you for choosing Sennheiser! We have designed this product to give you reliable operation over many years. Please take a few moments to read these instructions carefully, as we want you to enjoy your new Sennheiser product quickly and to the full. Chapter Contents ............................................................................ ...
-
Sennheiser EK 3041-U - page 3
29 1 Brief description The EK 3041-U is a miniature true diversity radiomicrophone receiver designed for use with the new digital ENG camcorders. It can be inserted in the slot-in facility of most professional camcorders such as the Philips LDK 120, Ikegami Hl-77 or Sony SX. Together with a suitable Sennheiser UHF pocket or hand-held transmitter, a ...
-
Sennheiser EK 3041-U - page 4
30 4 Noise reduction with HiDyn plus ® This receiver is equipped with HiDyn plus ® , the Sennheiser noise reduction system that reduces RF interference. It increases the signal-to-noise ratio in wireless audio transmission to more than 100 dB. HiDyn plus ® is a wideband compander system which compresses the AF level on the transmitter side in a ...
-
Sennheiser EK 3041-U - page 5
31 electronic switching from one signal to another receiver 2 receiver 1 AF-signal AF-signal 5 Diversity reception The EK 3041-U receiver operates on the „true diversity“ principle: A receiving antenna receives not only the electromagnetic waves which reach it by a direct path, but also the reflections of these waves which are created in the ro ...
-
Sennheiser EK 3041-U - page 6
32 햲햳 햴 햶 햷 햸 햵 햲 SET button for menu selection and programming 햳 Antenna socket, diversity branch A 햴 ON / OFF switch 햵 Multi-function display panel 햶 Button for adjusting the settings of a selected menu (cycling downwards) 햷 Button for adjusting the settings of a selected menu (cycling upwards) 햸 Antenna socket, divers ...
-
Sennheiser EK 3041-U - page 7
33 Your EK 3041-U receiver is supplied with two antenna which are necessary for true diversity operation (see chapter 5). The length of the antenna has been matched to the frequency range of your EK 3041-U receiver. Insert the antenna into sockets 햳 and 햸 and screw them tight. 7 Mounting the antenn æ ...
-
Sennheiser EK 3041-U - page 8
34 PHILIPS 8 Mounting the EK 3041-U into the Philips LDK 120 camcorder Preparation: Mount the base plate suitable for the Philips camcorder and fix it to the left and right of the receiver by means of two screws. The Philips adaptor features a 44-pin connector (accessories). Mounting the receiver into the camcorder: • Fix the receiver (from above ...
-
Sennheiser EK 3041-U - page 9
35 IKEGAMI 9 Mounting the EK 3041-U into the Ikegami HL-V77 camcorder Preparation: Mount the base plate suitable for the Ikegami camcorder and fix it to the left and right of the receiver by means of two screws. The Ikegami adaptor features a 25-pin connector (accessories). Mounting the receiver into the camcorder: • Screw the mounting frame to t ...
-
Sennheiser EK 3041-U - page 10
36 SONY 10 Mounting the EK 3041-U into the Sony SX camcorder Preparation: Mount the base plate suitable for the Sony camcorder and fix it to the left and right of the receiver by means of two screws. The Sony adaptor features a 15-pin connector (accessories). Mounting the receiver into the camcorder: • Screw the mounting frame to the Sony camcord ...
-
Sennheiser EK 3041-U - page 11
37 11 Power supply Your EK 3041-U receiver can be powered from different power sources. The adaption to these power sources is via the plug-in connector at the bottom of the receiver and the corresponding accessories. The EK 3041-U can be powered • directly via the camcorder with 12 V or 5.6 V or • via the GA 3041-B power adaptor which is attac ...
-
Sennheiser EK 3041-U - page 12
38 14 Display of receiving frequency or channel number You can choose the content of the display i.e. whether the preselected receiving frequency or its respective channel number is indicated. To do so, please proceed as follows: 씰 If you press button , the preselected receiving frequency is indicated. 씰 If you press button , the respec ...
-
Sennheiser EK 3041-U - page 13
39 씰 Press the SET button three times to select a receiving frequency ( see chapter 19). 씰 Press the SET button four times to assign a channel number to a receiving frequency ( see chapter 20). 씰 Press the SET button five times to adjust the limiter of the headphone output. This menu is skipped (= out of operation) if the receiver is ...
-
Sennheiser EK 3041-U - page 14
40 17 Adjusting the headphone volume 씰 Briefly press the SET button once . The display now indicates „PHonE“ in alternation with a three-digit number indicating the current volume level at the headphone output of your EK 3041- U receiver. The adjustment range of the headphone volume is between 0 an 126 (on the display). 씰 The headphone outp ...
-
Sennheiser EK 3041-U - page 15
41 18 Adjusting the squelch Your EK 3041-U receiver is equipped with an adjustable squelch control which eliminates annoying noise when the transmitters are switched on and off. It also suppresses sudden noise when a transmitter leaves the reception area and there is no longer sufficient transmitter power received by the receiver. 씰 Briefly press ...
-
Sennheiser EK 3041-U - page 16
42 19 Changing the receiving frequency 씰 Briefly press the SET button three times . The display now indicates the preset receiving frequency in alternation with the channel number assigned. (If no channel number has been assigned, three „hyphens“ appear on the display): 씰 With the / buttons you can now select a different frequency. ...
-
Sennheiser EK 3041-U - page 17
43 20 Assigning a channel number You can assign a channel number (from 001 to 255) to each of the 32 receiving frequencies. With larger systems, it is recommended to use the same channel number for both transmitters and receivers in order to provide for simpler monitoring of the system. 씰 Briefly press the SET button four times . The display now ...
-
Sennheiser EK 3041-U - page 18
44 21 Limiter Your EK 3041-U receiver is equipped with a switchable limiter which limits the output voltage of the built-in headphone amplifier. The limiter protects your hearing and should therefore always be switched on. Note The limiter can only be used if the receiver is not inserted in the slot-in facility of a camcorder but is operated as a s ...
-
Sennheiser EK 3041-U - page 19
45 22 Locking the operating buttons / „ Lock mode “ function You can lock the operating buttons of your EK 3041-U to prevent accidental programming or switching off by a user inexperienced in handling the receiver. Locking the buttons 씰 Briefly press the SET button six times until „Loc“ begins to flash on the display. 씰 Now press the SE ...
-
Sennheiser EK 3041-U - page 20
46 23 Sennheiser transmitters report their battery/accupack status Sennheiser supplies hand-held and pocket transmitters ( see chapter 24) which provide information on the available transmitter battery/accupack status to the receiver. This information can be evaluated with the EM 3041- U receiver. 씰 When the battery or accupack capacity is so ...
-
Sennheiser EK 3041-U - page 21
47 24 Suitable Sennheiser transmitters For the optimum use of the excellent reception qualities of the EK 3041-U receiver, Sennheiser offers hand-held and pocket transmitters in a variety of configurations: Pocket transmitters: • SK 1063-U (without display of battery status) • BF 1083-U (without display of battery status) • SK 50-U (with disp ...
-
Sennheiser EK 3041-U - page 22
48 25 Safety instructions 씰 Never open electronic devices! Servicing and programming must only be done by authorised personnel and is all the more important for current- carrying units. If devices are opened by customers in breach of this instruction, the warranty becomes null and void. 씰 Keep the receiver away from central heating radiators an ...
-
Sennheiser EK 3041-U - page 23
49 28 Recommended accessories • GA 3041-C Base plate with special housing Cat. no. 04642 • GA 3041-B Power adaptor Cat. no. 04643 • GA 3041-15 Sony adaptor Cat. no. 04639 • GA 3041-25 Ikegami adaptor Cat. no. 04640 • GA 3041-44 Philips adaptor Cat. no. 04641 • B 50 Battery box (small) Cat. no. 03545 • B 250 Battery box (large) Cat. no ...
-
Sennheiser EK 3041-U - page 24
50 29 Technical data Frequency range 450–960 MHz Receiver frequencies max. 32, pre-programmed to customer specifications Switching bandwidth 24 MHz Frequency stability ± 10 ppm (– 10 ° C to + 55 ° C) Sensitivity (with HiDyn plus ® ) typ. 10 µ V for 90 dBA rms SNR Squelch treshold 0 to 100 µ V, adjustable in 5-dB steps Adjacent channel rej ...
-
Sennheiser EK 3041-U - page 25
148 Sennheiser electronic GmbH & Co. KG D-30900 Wedemark Telefon: +49 (0) 5130 600 0 Telefax: +49 (0) 5130 600 300 Printed in Germany Publ. 04/98 69668 / A 01 Aktuelle Informationen zu Sennheiser-Produkten erhalten Sie auch im Internet unter „http://www.sennheiser.com“. Up to date information on Sennheiser products can also be found on the ...
¿Tienes una pregunta acerca de Sennheiser EK 3041-U?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Sennheiser EK 3041-U, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Sennheiser EK 3041-U probablemente compartirá una forma de solucionarlo.