-
Canon 4427B002 - page 1
EF8-15mm f/4L Fisheye USM Instruction ENG C OP Y ...
-
Canon 4427B002 - page 2
ENG-1 6. Manual f ocusing is av ailable after the subject comes into focus in autof ocus mode (ONE SHO T AF). 7. A truly round aper ture hole results in a nicer background b lur . 8. Equipped with a zoom limiter function which restricts the zoom range. 9. Tight seal structure ensures excellent dust- proof and drip-proof performance. • "USM&q ...
-
Canon 4427B002 - page 3
ENG-2 a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. • Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attac ...
-
Canon 4427B002 - page 4
ENG-3 Precautions for Shooting with a Fishe ye Lens • If dir t or dust adheres to the surface of the front lens element, it can easily appear in images due to the lens’ s short focal length. In order to avoid this , please remov e dir t or dust from the surface of the front lens element by using a commercially a vailab le air dust blo wer . • ...
-
Canon 4427B002 - page 5
ENG-4 Nomenc lature Distance scale ( → 9) Focus mode switch ( → 6) “C” / “H” Indicator ( → 7) Zoom Limiter ( → 7) Lens mount index ( → 5) Contacts ( → 5) Hood mount ( → 10) Zoom ring ( → 6) Focusing ring ( → 6) Gelatin filter holder ( → 12) F or detailed inf ormation, reference page numbers are pro vided in parentheses ( ...
-
Canon 4427B002 - page 6
ENG-5 See your camera’ s instr uctions for instructions on mounting and detaching the lens. • After detaching the lens, please attach the lens hood and lens cap and place the lens with the rear end up to prev ent the electrical contacts and lens surface from getting scr atched. • If the contacts get soiled, scratched, or hav e fingerpr ints o ...
-
Canon 4427B002 - page 7
ENG-6 3. Zooming To z oom, turn the zoom ring. Be sure to finish zooming bef ore focusing. Changing the zoom ring after focusing can aff ect the focus . To shoot in autofocus (AF) mode , set the focus mode switch to AF . To use only manual f ocusing (MF), set the focus mode switch to MF , and focus b y turning the f ocusing ring. The focusing ring ...
-
Canon 4427B002 - page 8
ENG-7 “C” and “H” Markings Adjacent to the zoom ring, the “C” and “H” markings ser ve as guides to indicate the wide- angle zoom position where f ocus is set at infinity at which photos can be created without vignetting when using EOS digital cameras installed with APS-C or APS-H image sensors. The “C”/”H” indicator on the z ...
-
Canon 4427B002 - page 9
ENG-8 • Circular Fishe ye The circular fishey e effect ref ers to the 180 degree circular angle of view which appears within the area of the image sensor . W hen the f ocusing distance of this particular lens is set to infinity , the circular fisheye effect is achie v ed by setting the focal length (wide end) to 8mm and using a camera equipped wi ...
-
Canon 4427B002 - page 10
ENG-9 4. Infinity Compensation Mark Infinity compensation mark Distance index To compensate for shifting of the infinity f ocus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mark is aligned with the distance indicator on the distance scale. F or accur ate ...
-
Canon 4427B002 - page 11
ENG-10 6. Hood Attaching To attach the hood, align the hood’ s attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arro w until the lens' red dot is aligned with the hood's stop position mark. The EW-77 hood can k eep unwanted light out of the lens , and also protects the front of the l ...
-
Canon 4427B002 - page 12
ENG-11 Hood Vignetting will not occur while shooting in the f ollo wing zoom ranges when using the lens hood. Please detach the lens hood when shooting outside of these ranges. • Full Format: Only at the telephoto end • APS-H: F rom the telephoto end to the “H” marking • APS-C: F rom the telephoto end to the “C” marking (range when us ...
-
Canon 4427B002 - page 13
ENG-12 7. Lens Cap While the lens hood (included) is attached to the lens, Lens Cap 8-15 can be attached to the lens hood by pressing the b uttons located on the upper and lower sides of the lens cap and aligning its recessed par ts with the conv ex parts f ound in the lens hood. There is a gelatin filter holder at the rear of the lens. Cut the gel ...
-
Canon 4427B002 - page 14
ENG-13 Specifications Focal Length/Aperture 8 – 15 mm f/4 Lens Construction 11 groups, 14 elements Minimum Aperture f/22 Angle of View Diagonal: 180° – 175° 30’ V er tical: 180° – 91° 46’ Horizontal: 180° – 142° Min. Focusing Distance 0.15 m / 0.5 ft. Max. Magnification 0.34x (center of image, telephoto end) Max. Diameter and Leng ...
-
Canon 4427B002 - page 15
CT1-8571-002 © CANON INC. 2011 0812Ni C OP Y ...
¿Tienes una pregunta acerca de Canon 4427B002?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Canon 4427B002, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Canon 4427B002 probablemente compartirá una forma de solucionarlo.