-
Element Electronics FLX-2610 - page 1
FLX- 26 10 26 ” LCD Television ...
-
Element Electronics FLX-2610 - page 2
This TV incorporates High-De fi nition Multimedia Interface (HDMI TM ) technology . HDMI, the HDMI logo and High-De fi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Con fi dent ...
-
Element Electronics FLX-2610 - page 3
ENGLISH ENGLISH 1 FCC F eder al Communications Commission Statement This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use ...
-
Element Electronics FLX-2610 - page 4
2 Warnings and P recautions War nings and Pr ecautions T o reduce the risk of fi re or electric shock, do not expose this equipment to rain or moisture. This symbol is intended to alert the user to avoid the risk of electric shock. This equipment must not be disassembled by anyone except quali fi ed service personnel. This symbol is intended to a ...
-
Element Electronics FLX-2610 - page 5
ENGLISH ENGLISH 3 Warnings and P recautions ▪ Use and handle the power cord with care. Do not place any heavy objects on the AC power cord. ▪ Do not pull the AC power cord. Do not handle the AC power cord with a wet hand. ▪ Do not touch the power cord and antenna cable during lightning. ▪ Remove the plug from the wall outlet, if the equipme ...
-
Element Electronics FLX-2610 - page 6
4 Warnings and P recautions Outdoor Antenna Safety Instructions Antenna lead-in wire Antenna discharge unit (NEC section 810-20) Grounding conductors (NEC section 810-20) Ground clamps Power service grounding (NEC Art250 part H) Ground clamps Electric service equipment NEC : National Electrical code If an outdoor antenna is connected, follow the pr ...
-
Element Electronics FLX-2610 - page 7
ENGLISH ENGLISH 5 T ABLE OF CONTENTS Federal Co mmunic ati ons Com missi on Stat eme nt .......................... 1 W arnings and Precautions Important Safety Instructions ....................................................................................... 2 Antenna Safety Instructions ........................................................... ...
-
Element Electronics FLX-2610 - page 8
6 Chapter 1 Introducing the L CD TV V arious Audio/Video t erminals for external equipment connec tion ▪ 2 sets of composite A/V input terminals ▪ 1 set of S-VIDEO terminals ▪ 2 sets of component Video input terminals ▪ 1 VGA/ Audio input terminals ▪ 1 HDMI/Audio input terminals ▪ 1 set of Audio(L/R) output terminals ▪ 2 SPDIF output ...
-
Element Electronics FLX-2610 - page 9
ENGLISH 7 Chapter 1 Introducing the L CD TV Make sure all of the above contents are included in the package. If you are missing any items, please contact the Element Electronics customer service department. LCD TV Make sure all of the following contents are included. Power Cord These items are all you need to set up and operate the LCD TV i ...
-
Element Electronics FLX-2610 - page 10
8 Chapter 1 Introducing the L CD TV Setting Up Y our LCD TV How to install the TV Stand Attach the Stand the TV with the bottom foam packaging material still attached. Read all instructions before continuing with the stand installation. a b Stand Shipping box Protective bag T able c. Remove protective bag from LCD unit, but DO NOT remove the bottom ...
-
Element Electronics FLX-2610 - page 11
ENGLISH 9 Chapter 1 Introducing the L CD TV If you prefer to mount your new Element Electronics TV on a wall instead of attaching it to the stand, please reference the instructions included in the wall mounting kit (sold separately). Remove the screws of the table stand and detach the table stand from the TV . Soft cloth Align the holes on ...
-
Element Electronics FLX-2610 - page 12
10 Chapter 1 Introducing the L CD TV Do not use caustic cleaners (porcelain, stainless steel, t oilet, or oven cleaner etc.) on the remote , as it may su er damage. Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’ s ANT . terminal (refer to page15-17). Connect the AC power cord at the back of the TV and connect ...
-
Element Electronics FLX-2610 - page 13
R L AUDIO VIDEO L R VIDEO1 IN VIDEO ENGLISH 11 Chapter 1 Introducing the L CD TV Y our LCD TV LED The LED light indicates when the LCD TV is activated. IR Infrared Receiver MENU Press once to display the OSD (on screen display), press again to turn the OSD off. VOL UME +- Adjusts the volume up and down. Selects the main-menu item and change values ...
-
Element Electronics FLX-2610 - page 14
HDMI IN AUD IO LR LR LR LR L R LR LR AUD IO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV YP b P r A U D I O YPbPr2 IN YP b P r A U D I O VGA IN Connects the PC, or other A V equipment with VGA and AUDIO(L/R) output jacks. YPbPr1 IN/YP bPr2 IN Connects to the DV ...
-
Element Electronics FLX-2610 - page 15
ENGLISH 13 Chapter 1 Introducing the L CD TV S.MODE MTS P . MODE VOL. CH. MUTE INPUT GUIDE EXIT INFO MENU P .SIZE SLEEP CAPTION Y our Remote Control 3 9 2 1 8 12 T urns the LCD TV on and of f. MTS Cycles through the multi-channels TV sound(MTS) options: SAP/MONO/ STEREO S.MODE Selects sound effect options: Surround/ Live/Dance/T echno/Classic/Soft/ ...
-
Element Electronics FLX-2610 - page 16
14 Chapter 2 Installing the LCD T V E ective range: The remote can contr ol the L CD TV from up to 5m away , if pointed directly at the receiver . 13 14 15 16 17 18 GUIDE Displays the Program Guide on the screen. Pressing again to turn GUIDE off. EXIT Exits the OSD menu. ▲▼►◄ Cycles through OSD options and OK selects individual menu item ...
-
Element Electronics FLX-2610 - page 17
ENGLISH 15 Chapter 2 Installing the LCD T V Chapter 2 Installing the LCD TV Refer to the owner ’s manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Antenna Connection The antenna requirements for good color TV recep ...
-
Element Electronics FLX-2610 - page 18
16 Chapter 2 Installing the LCD T V OUT IN 300-ohm twin- lead cable 300-ohm twin- lead cable 75-ohm coaxial cable UHF Antenna VHF Antenna Combiner (not included) A . Com bin atio n VHF/UH F anten na 300-ohm twin- lead cable 75-ohm coaxial cable VHF/UHF Antenna VHF/UHF Antenna 300/75-ohm adapter (not included) B. Separate VHF and/ or UHF antennas Us ...
-
Element Electronics FLX-2610 - page 19
ENGLISH 17 Chapter 2 Installing the LCD T V This reminder is provided to call the CA TV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular , speci fi es that the cable ground shall be connected to the grounding system of the building accurately , o ...
-
Element Electronics FLX-2610 - page 20
18 Chapter 2 Installing the LCD T V Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal. Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. VHF/UHF IN HDTV/TV Air/Cab le VHF/UHF IN HDTV/TV Air/Cab le BE SURE TO UNPLUG A C POWER CORD BEFORE REMOVING THE FUSE. This ...
-
Element Electronics FLX-2610 - page 21
ENGLISH 19 Chapter 2 Installing the LCD T V Press the button on the remote to turn on the LCD TV . Main TV(CABLE/AIR) VIDEO1 (SIDE) VIDEO2 (REAR) VIDEO3 (S-VIDEO) VIDEO4 (YPbPr1) VIDEO5 (YPbPr2) VIDEO6 (HDMI) COMPUTER(VGA) Press the OK button to display the received channel list, then press ▲▼ to select a channel. Or , use the ▪ ( ...
-
Element Electronics FLX-2610 - page 22
METHOD A: Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s VIDEO2 IN jacks. METHOD B: Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’s audio inputs. Use a S-Video cable to connect the VCR’ s s-video output jack to the LCD TV’ s S-VIDEO IN input jack. Connect all AC ...
-
Element Electronics FLX-2610 - page 23
L R VIDEO1 IN VIDEO Right Side ENGLISH 21 Chapter 2 Installing the LCD T V A B HDMI IN AUD IO LR LR LR LR L R LR LR AUD IO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV YP b P r A U D I O YPbPr2 IN YP b P r A U D I O Rear of TV or AUDIO Cable S-VIDEO Cable A V C ...
-
Element Electronics FLX-2610 - page 24
22 Chapter 2 Installing the LCD T V C Rear of TV A B HDMI IN AUD IO LR LR LR LR L R LR LR AUD IO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV YP b P r A U D I O YPbPr2 IN YP b P r A U D I O or METHOD A: Use a composite cable to connect the DVD player ’s c ...
-
Element Electronics FLX-2610 - page 25
ENGLISH 23 Chapter 2 Installing the LCD T V For best picture quality , if your equipment has component video output, use a component cable instead of a composite video or S-video cable . Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. Press the button on the remote to turn on the ...
-
Element Electronics FLX-2610 - page 26
24 Chapter 2 Installing the LCD T V Use a component cable to connect the satellite receiver ’s/TV Cable Box’ s component (YPbPr1) output jacks to the LCD TV’ s component input jacks. Use an audio cable to connect the satellite receiver’s/TV Cable Box’s component audio jacks to the LCD TV’ s audio input jacks. Connect all AC powe ...
-
Element Electronics FLX-2610 - page 27
ENGLISH 25 Chapter 2 Installing the LCD T V HDMI IN AUD IO LR LR LR LR L R LR LR AUD IO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV YP b P r A U D I O YPbPr2 IN YP b P r A U D I O Rear of TV Use a HDMI cable to connect the A V equipment’s HDMI output jac ...
-
Element Electronics FLX-2610 - page 28
26 Chapter 2 Installing the LCD T V HDMI IN AUD IO LR LR LR LR L R LR LR AUD IO VGA IN VIDEO2 IN VIDEO AUDIO S-VIDEO IN S-VIDEO AUDIO YPbPr1 IN AUDIO OUT STEREO DIGITAL OPTICAL COAXIAL Air/Cable VHF/UHF IN HDTV/TV YP b P r A U D I O YPbPr2 IN YP b P r A U D I O Rear of TV Use a HDMI-to-DVI cable to connect the A V equipment’s DVI output jack ...
-
Element Electronics FLX-2610 - page 29
ENGLISH 27 Chapter 3 Using the L CD TV Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’ s VGA input jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s. Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. Press the button on th ...
-
Element Electronics FLX-2610 - page 30
28 Chapter 3 Using the L CD TV Use an audio cable to connect the audio receiver ’s audio LINE IN jacks to LCD TV’ s AUDIO OUT jacks. Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. Press the button on the remote to turn on the LCD TV . Connecting an Audio Receiver or a Dol ...
-
Element Electronics FLX-2610 - page 31
ENGLISH 29 Chapter 3 Using the L CD TV Chapter 3 USING THE FEA TURES WIDE Stretches the image vertically and horizontally to fi ll the screen at 1:1.85 aspect ratio Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through the following wide screen settings. Press the P .SIZE button repeatedly to select the sc ...
-
Element Electronics FLX-2610 - page 32
30 Chapter 3 Using the L CD TV Press the button to turn the LCD TV on. Press the MENU button on the remote control,the on-screen menu will appear on the screen. Use the ◄► buttons to select your main menu option. VIDEO MENU: AUDIO MENU: Operating the Menu ▪ If the signal source is VIDEO/S-VIDEO/YPbPr/ HDMI/VGA, the AUDIO MENU appears ...
-
Element Electronics FLX-2610 - page 33
ENGLISH 31 Chapter 3 Using the L CD TV Use the ▲▼ buttons to highlight the option of the sub-menu, and press the OK button. While in adjustment mode, and use the ◄► buttons to change the value of the item. Press the EXIT button to exit the menu. SETUP MENU: Allows you to set up a variety of features: Language, Closed Caption, factor ...
-
Element Electronics FLX-2610 - page 34
32 Chapter 3 Using the L CD TV Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the VIDEO . Use the ▲▼ buttons to highlight an individual VIDEO option, use the ◄► buttons to change the setting, and press the MENU to exit the menu ? ...
-
Element Electronics FLX-2610 - page 35
ENGLISH 33 Chapter 3 Using the L CD TV Color temperature Adjusts color components independently to achieve a warm or cool effect: Cool/Nature/W arm/User ▪ War m : Increases red tint ▪ Nature : Increases natural tint ▪ Cool : Increases blue tint ▪ User : Allows the user to adjust red, green and blue color component levels independently . Aut ...
-
Element Electronics FLX-2610 - page 36
34 Chapter 3 Using the L CD TV Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the AU DI O . Use the ▲▼ buttons to highlight an individual AUDIO option, use the ◄► buttons to change the setting, and press the MENU to exit the menu ...
-
Element Electronics FLX-2610 - page 37
ENGLISH 35 Chapter 3 Using the L CD TV SPDIF T ype Allows to selection of the digital sound format: PCM/OFF/Dolby Digital ▪ PCM : The external audio system is connected to the AUDIO OUT (L/R) of the LCD TV ▪ Dolby Digital : The external audio system is connected to the AUDIO OUT DIGIT AL (OPTICAL or COAXIAL) ot the LCD TV ▪ OFF : Select OFF t ...
-
Element Electronics FLX-2610 - page 38
36 Chapter 3 Using the L CD TV Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the TV . Use the ▲▼ buttons to highlight an individual TV option, use the ◄► buttons changes the setting, and press the MENU exits the menu. The TV ...
-
Element Electronics FLX-2610 - page 39
ENGLISH 37 Chapter 3 Using the L CD TV Press the ▼ button to select the desired channel, andpress the OK button repeatedly to select show ( ) or hide( ) F avorite List Select Fa vorite List from the TV option and press the OK button. The Favorite List menu appears: Press the ▼ button to select the desired channel, and press ...
-
Element Electronics FLX-2610 - page 40
38 Chapter 3 Using the L CD TV Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the SE TUP . Use the ▲▼ buttons to highlight an individual SETUP option, use the ◄► buttons to change the setting, and press the MENU to exit the menu. ...
-
Element Electronics FLX-2610 - page 41
ENGLISH 39 Chapter 3 Using the L CD TV Digital Closed Caption : Press the ◄► buttons to select the digital closed caption options: Service1/Service2/Service3/Service4/Service5/Service6/OFF Note: The setting her e will be applied to each DT V channel Caption Style: Press OK button to customize the settings for digital closed caption opti ...
-
Element Electronics FLX-2610 - page 42
40 Chapter 3 Using the L CD TV Channel Block Allows to block digital channels. Input Block Selects to block a Input source signal Change Passw ord Selects to change your password Gamma Allows adjustment of the display’s gamma correction, which fi ne tunes both brightness and red/green/blue ratios: Bright/Dark/Middle. Reset Default Pr ...
-
Element Electronics FLX-2610 - page 43
ENGLISH 41 Chapter 3 Using the L CD TV Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the SE TUP . Use the ▼ buttons to highlight Parental , and press the OK button. Using the Program Block Settings Program Block Channel Block Input Block Change Password Use the Parent al fun ...
-
Element Electronics FLX-2610 - page 44
42 Chapter 3 Using the L CD TV The Par ental block menu includes the following options: U.S. TV Ratings Selects to activate the TV Rating programs. U.S. Movie Ratings Selects to activate the MP AA Rating programs Canadian English Ratings Selects to activate the English Rating programs of Canada. Canadian F rench R atings Selects to activate the ...
-
Element Electronics FLX-2610 - page 45
ENGLISH 43 Chapter 3 Using the L CD TV CONTENT -BASED FV D L S V AGE-BASED TV - Y TV - Y7 TV -G T V-PG T V-14 T V-MA : T o block programs by both content and age. The U.S . T V R atin g has 2 r ati ng met ho ds: Co ntent- Bas ed Ra tin g and Ag e - Ba sed R ati ng. The U.S. T V Rat ing includes the follow ...
-
Element Electronics FLX-2610 - page 46
44 Chapter 3 Using the L CD TV The Canadian Englsh Ratings includes the following options: RA TING DES CRI PTION G All children C8+ Children 8 years and older G General programming PG Parental guidance 14+ Viewers 14 and older 18+ Adult programming Canadian English Ratings Use the ◄► ▲▼ buttons to select the rating you want and press the OK ...
-
Element Electronics FLX-2610 - page 47
ENGLISH ENGLISH ENGLISH 45 Speci cations The U.S. Movie Ratings is used for original movies rated by the Motion Picture Association of America(MP AA) as broadcasted on cable TV and not edited for television. The U.S. Movie Ratings includes the following options: RA TING DES CRI PTION G General Audiences. Movie is appropriate for all ages PG Pare ...
-
Element Electronics FLX-2610 - page 48
46 Chapter 3 Using the L CD TV Using the Program Guide With the LCD TV connected to a television programming source, press the INPUT button on the remote control and use the ▲▼ buttons to select TV and press the OK button. Press the GUIDE button on the remote control, the Program Guide will appear on the screen: The Program Guide featur ...
-
Element Electronics FLX-2610 - page 49
ENGLISH ENGLISH ENGLISH 47 Speci cations SPECIFICA TIONS MODEL FLX-2610 FLX-3210 LCD Panel Panel Size 26” TFT LCD 32” TFT LCD Brightness 500 cm2 400 cm2 Contrast Ratio 800:1 1200:1 Max. Resolution 1366x768 1366x768 Input Connector VIDEO/AUDIO(L/R) 2 2 S-VIDEO/AUDIO(L/R) 1 1 YPbPr/AUDIO(L/R) 2 2 VGA/AUDIO(L/R) 1 1 HDMI/AUDIO(L/R) 1 1 AUDIO OU ...
¿Tienes una pregunta acerca de Element Electronics FLX-2610?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Element Electronics FLX-2610, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Element Electronics FLX-2610 probablemente compartirá una forma de solucionarlo.