-
Daxten 8I - page 1
RackAccess 8i RackAccess 16i Installation guide ...
-
Daxten 8I - page 2
Specifications Part Numbers 3115-108M-xx RackAccess 8i con sole - 15” TFT Display & integrated SCOUTutp 8 port kvm Switch 3115-116M-xx RackAccess 16i co nsole - 15” TFT Display & integrated SCOUTutp 16 port kvm Switch 3115-116IP-xx RackAccess 16i co nsole - 15” TFT Display & integrated SCOUTutp 16 port kvm Switch & IP Access 3 ...
-
Daxten 8I - page 3
Monitor 15” TFT Display 17” TFT Display 19” TFT Display Display Area: 30.4 x 22.8 cm 12 x 9” 33.7 x 27.0 cm 13.7 x 10.64” 37.6 x 30.10 cm 14.8 x 11.8” Scan frequency horizontal: 31.47K to 68KHz 31.47K to 68KHz 31.47K to 68KHz Scan frequency vertical: 60Hz 60Hz 60Hz Viewing Angle: 160° Horizontal, 160° Vertical 140° Horizontal, 110° ...
-
Daxten 8I - page 4
Agency Approv als EMI FCC-A and CE Emissions MRP -II Energy Saving EPA energy star, VESA DPMS CPU Adaptors PS/2 USB SUN Connectio ns Video HD15 HD15 HD15 Keyboard/Mouse MiniDin6 USB MiniDin8 System RJ45 RJ45 RJ45 Power From computer’s Keyboard port From USB port From computer’s Keyboard port Product weight 107g / 0.23lb Shipping weight 300g / 0 ...
-
Daxten 8I - page 5
RackAccess 8i & RackAccess 16i Introduction The RackAccess 8i and 16i are co mpact 1U hi gh rack mountable TFT Screen, keyboard and mouse, with integrated kvm switch (SCOUTutp). Av ailable in 3 screen si zes 15”, 17” and 19” Product Features ¾ Integrated SCOUTutp 8 or 16 port KVM swit ch. ¾ Available with integrated IP control (SCO UTip ...
-
Daxten 8I - page 6
7. Power switch Use the power switch to turn ON or OFF power. We recomm end turning your system on first, then the LCD monitor. Adjusting the Monitor The LCD monitor is designed to work with a range of compatible video adapters on the market. Due to all the possible variations between these video adapte rs, you may need to adjust the settings for y ...
-
Daxten 8I - page 7
User Mode: Changes the RGB colour values Changes the viewabl e screen size Execute the white balance function Adjusts phase tracking to reduce scre en flicker Change Red gain for the colour temperature Moves the whole screen left or right Change Green gain for the colour temperature Moves the whole screen up or down Change Blue gain for the colour ...
-
Daxten 8I - page 8
Auto-Adjustment We recommend that you use the Auto-Adjustment to get optimized video quality. Use the + + & ▬ ▬ key to select auto-adjustment, then press ▼ ▼ key to get optimized quality. Introduction – Integrated SCOUTutp Switch The built in KVM switch (SCOUTutp) will ensu re easy and accurate control of up to 16 PCs through a single ...
-
Daxten 8I - page 9
Using the SCOUTutp Note: Before switching your computers on, please configure non PS/2 computer s emulation type in the OSD! The SCOUTutp provides tw o possibilities to select the desired computer. You may use either the keyboard Hot Key comman ds or take advantage of the OSD (On-S creen-Display). You may notice that the mouse ca nnot be used for a ...
-
Daxten 8I - page 10
General Settings Security Hotkey Autoskip Serial port Keyboard language Switch name General Settings Select General and press ENTER , the General Settings window will appear. From this window you can do the followi ng: Security The OSD comes with an advanced p assword security system with 3 different security level s. Each secur ity level has diffe ...
-
Daxten 8I - page 11
Ports PORTS SETTINGS Name K B HKEY 01 COMPUTER 01 P S N O 02 COMPUTER 02 U 1 N O 03 SWITCH 03 P S C L F 1 1 04 COMPUTER 04 P S N O 05 COMPUTER 05 U 2 N O 06 COMPUTER 06 U 3 N O 07 COMPUTER 07 P S N O 08 COMPUTER 08 P S N O In the Settings window navigate to the Ports line and press ENTER . The Ports Settings wi ndow appears. Name (Editing the compu ...
-
Daxten 8I - page 12
Typing 9 9 9 in the T/O column disables the Timeout function. Typing 0 0 0 – the Timeout function works immediately. We recommend a T/O setting of at least 10 se conds. Typing 9 9 9 in the SCN column displays the screen for 999 seconds. Typing 0 0 0 – the comp uter screen is skipped. Users USERS SETTINGS USERS 1 2 3 4 5 6 0 1 COMPUTER 0 1 Y Y Y ...
-
Daxten 8I - page 13
Moving the label – F6 Position the OSD label anywhere on the scree n. To position the OSD label from the Main window, nav igate to the de sired computer usi ng the Up and Down arrow key s. Press F6 . The selected screen image and Ide ntification label will appear. Use the arrow keys to move the label to the desired position. Press Esc to save and ...
-
Daxten 8I - page 14
Communication Error If a Communication Error box appears when trying to scan the system, check that: The Serial download cable is co nnected to the com puter’s and SCOUTutp IP Ma nager’s serial ports. The Com Port Settings in Options / Com Port are set correctly. After changi ng the Com port exit and re-start the Control software. The View menu ...
-
Daxten 8I - page 15
Password protection When the SCOUTutp system is passwo rd protected, the Control software behaves in exactly the sam e way as the OSD. You must type in the required pa ssword to access the Cont rol software. The access you gain depends on the security status –. To change the security access, close an d reopen the Control software, and type in the ...
-
Daxten 8I - page 16
Single computer Settings To see all the Settings of a single comput er, right click the computer icon. The Settings ap pear as in the figure below. Note! There is no Select box to check. Loading a saved configuration To load a saved configuration: From the File menu choose Open. Note: All changes done with the Control software are only reflected in ...
-
Daxten 8I - page 17
Verifying the version numbers Before upgrading the firmware, you must first verify whi ch firmware and hardware versions you have. The OSD version number To verify the OSD version number: 1. Open the SCOUTutp Switch Update program. 2. In the Switch Unit box, check the OSD option. 3. Click F/W Version the version number appears in the Switch box. Th ...
-
Daxten 8I - page 18
Resetting the Switch or ADAPTOR units To reset the Switch or ADAPTOR units: 1. For the Switch, check the SCOUTutp S w itch option in the Switch Unit box. 2. For the Adaptors, chec k one or mo re Adaptors in the ADAPTOR Units box. 3. From the Options menu choose Advanced / Reset. The units reset. The system sho uld now be operational. Troubleshootin ...
-
Daxten 8I - page 19
NOTE: The USB ADAPTOR stores these setting s in their own internal memory so even if you unplug, power down, or move the m to another computer, the settings will not be lost. The following table illustrates ho w the W and R setti ngs change key assignment s on a PS/2 keyboard. Mac Equivalents Settings PS/2 Keyboard Layout Left á key Left Alt Right ...
-
Daxten 8I - page 20
Service Information Technical Support If you cannot determine the nature of a problem, plea se call Daxten and ask for Technical Support. If possible, call from a phone located n ear the unit, as we may be able to solve your problem directly over the phone. If we cannot solve your probl em, and determine that the fault is in the unit, we will issue ...
-
Daxten 8I - page 21
www.daxten.com Worldwide United Kingdom Ireland 5 Manhattan Business Park info.eu@daxten.com Bay 21 Westgate www.daxten.eu Free Zone West • London W5 1UP Shannon, Co. Clare info.ie@daxten.com info.uk@daxten.com USA www.daxten.ie www.daxten.co.uk info.us@daxten.com Tel: +353 (0) 61 23 4000 Tel: +44 (0) 20 8991 6200 Fax: +44 (0) 20 8991 6299 • ww ...
¿Tienes una pregunta acerca de Daxten 8I?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Daxten 8I, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Daxten 8I probablemente compartirá una forma de solucionarlo.