-
Life Fitness OHDMR - page 1
OL YMPIC HEA VY DUTY MUL TI RACK (OHDMR) Part # 7671101 Rev . A Revision:12/23/03 1 ASSEMBL Y INSTRUCTIONS ...
-
Life Fitness OHDMR - page 2
P AR TS LIST PA R T # LEA 7586101 LEA 7586501 LEA 7664501 LEA 7584901 LEA 7663601 LEA 7586601 LEA 7663401 LEA 7663901 LEA 7584401 LEA 7584501 LEA 7587501 LEA 7587901 LEA 7587801 LEA 7589201 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 QTY 1 1 2 2 2 2 1 1 1 1 10 1 1 2 KEY 15 16 17 18 19 20 21 22 23 24 25 26 27 PA R T # LEA 7596501 LEA 7663501 LEA 3239306 LE ...
-
Life Fitness OHDMR - page 3
3 17 1/2 X 1-1/2” BOL T 21 3/8” INT TOOTH LOCK W ASHER 20 1/2” INT TOOTH LOCK W ASHER 26 1/2 X 4-1/4” BOL T 18 3/8 X 3-3/4” FLA T HEAD BOL T 24 3/8” LOCK NUT 23 1/2” LOCK NUT 19 1/2” FLA T W ASHER 22 1/2” PLASTIC DOME W ASHER ...
-
Life Fitness OHDMR - page 4
STEP 1: FIGURE 1 4 • LOOSEL Y assemble the REAR UPRIGHT (4) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4” BOL TS (26), two 1/2” PLASITC DOME W ASHERS (22), two 1/2” INT TOOTH LOCK W ASHERS (20) and two 1/2” LOCK NUTS (23) as shown in FIGURE 1. 23 4 4 26 1/2 X 4-1/4” 2 20 1 22 • LOOSEL Y assemble the REAR UPRIGHT (4) to the RIGHT ...
-
Life Fitness OHDMR - page 5
5 STEP 2: FIGURE 2 • LOOSEL Y assemble the BOTT OM UPRIGHT SUPPOR T (15) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOL TS (26), four 1/2” PLASITC DOME W ASHERS (22), four 1/2” INT TOOTH LOCK W ASHERS (20) and four1/2” LOCK NUTS (23) as shown in FIGURE 2. 4 26 1/2 X 4-1/4” 22 4 15 20 23 Use this set of holes for assembly with PLA ...
-
Life Fitness OHDMR - page 6
6 STEP 3: FIGURE 3 • LOOSEL Y assemble the FRONT UPRIGHT (3) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4” BOL TS (26), two 1/2” PLASITC DOME W ASHERS (22), two 1/2” INT TOOTH LOCK W ASHERS (20) and two 1/2” LOCK NUTS (23) as shown in FIGURE 3. 23 3 3 26 1/2 X 4-1/4” 2 20 1 22 • LOOSEL Y assemble the FRONT UPRIGHT (3) to the RIG ...
-
Life Fitness OHDMR - page 7
7 STEP 4: FIGURE 4 4 5 3 • LOOSEL Y assemble two LOWER CROSS SUPPOR TS (5) to the FRONT UPRIGHTS (3) and the REAR UPRIGHTS (4) using eight 1/2 X 4-1/4” BOL TS (26), eight 1/2” INT TOOTH LOCK W ASHERS (20), eight 1/2” PLASITC DOME W ASHERS (22) and eight1/2” LOCK NUTS (23) as shown in FIGURE 4. 1/2 X 4-1/4” 26 22 20 23 3 4 5 ...
-
Life Fitness OHDMR - page 8
8 STEP 5: FIGURE 5 • LOOSEL Y assemble the CHIN-UP SUPPOR T (8) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOL TS (26), four 1/2” PLASTIC DOME W ASHERS (22), four 1/2” INT TOOTH LOCK W ASHERS (20) and four 1/2” LOCK NUTS (23) as shown in FIGURE 5. 8 20 22 23 1/2 X 4-1/4” 26 4 4 ...
-
Life Fitness OHDMR - page 9
9 STEP 6: FIGURE 6 • LOOSEL Y assemble the WEIGHT HORN UPRIGHTS (6) to the LEFT & RIGHT UPRIGHT BASE (1 & 2) and REAR UPRIGHTS (4) using eight 1/2 X 4-1/4” BOL TS (26), eight 1/2” PLASTIC DOME W ASHERS (22), eight 1/2” INT T OOTH LOCK W ASHERS (20) and eight 1/2” LOCK NUTS (23) as shown in FIGURE 6. 20 22 1/2 X 4-1/4” 26 6 23 4 ...
-
Life Fitness OHDMR - page 10
10 STEP 7: FIGURE 7 • Securely tighten all loose frame connections made to this point. TIGHTEN BOTH SIDES! TIGHTEN BOTH SIDES! ...
-
Life Fitness OHDMR - page 11
STEP 8: FIGURE 8 • LOOSEL Y assemble one RIGHT & one LEFT ADJUSTMENT RACK (9 & 10) to the REAR UPRIGHTS (4) as shown, using eight 3/8 X 3-3/4” FLA T HEAD BOL TS (18), eight 3/8” INT T OOTH LOCK W ASHERS (21) and eight 3/8” LOCK NUTS (24). See FIG- URE 8. 24 3/8 X 3-3/4” 18 21 9 10 4 4 13 12 • Before tightening the ADJUSTMENT RAC ...
-
Life Fitness OHDMR - page 12
12 STEP 9: FIGURE 9 • SECUREL Y assemble the ten WEIGHT HORNS (1 1) to the WEIGHT HORN UPRIGHTS (6) using twenty 1/2 X 4-1/4” BOL TS (26), twenty 1/2” INT T OOTH LOCK W ASHERS (20), twenty 1/2” PLASTIC DOME W ASHERS (22) and twenty 1/2” LOCK NUTS (23) as shown in FIGURE 9. 1/2 X 4-1/4” 26 20 11 6 6 22 23 ...
-
Life Fitness OHDMR - page 13
13 STEP 10: FIGURE 10 • Assemble two SWIVEL SPOTTERS (25) to the BOTT OM UPRIGHT SUPPOR T (15) as shown using four 1/2 X 1-1/2” BOL TS (17), four 1/2” INT TOOTH LOCK W ASHERS (20), four 1/2” FLA T W ASHERS (19) and four 1/2” LOCK NUTS (23). See FIGURE 10. (NOTE: Tighten connection SECUREL Y then back nut off 1/2 turn.) 17 1/2 X 1-1/2” 2 ...
-
Life Fitness OHDMR - page 14
14 STEP 1 1: FIGURE 1 1 • Insert the LEFT BAR SUPPOR T (12) into the desired slots of the LEFT ADJUSTMENT RACK (10), and allow it to drop down to lock in place. See FIGURE 11. 10 13 12 • Repeat the above step to assemble the RIGHT BAR SUPPOR T (13) to the RIGHT ADJUSTMENT RACK (9). 9 7 Thank you for purchasing the OL YMPIC HEA VY DUTY MUL TI RA ...
-
Life Fitness OHDMR - page 15
Clean: • Upholstery with mild soap and water . • Guide rods with a cotton cloth. • Hand grips with mild soap and water . • Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer service representative. Inspect: • Cables for wear or damage and proper tension (should not exceed 3/4” deflection ...
¿Tienes una pregunta acerca de Life Fitness OHDMR?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Life Fitness OHDMR, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Life Fitness OHDMR probablemente compartirá una forma de solucionarlo.