-
Craftsman 315.11445 - page 1
Operator's Manual 318 in., 14.4 VOLTS CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 315.114450 Save this manual for future reference _IL WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Bev ...
-
Craftsman 315.11445 - page 2
• Introduction ..................................................................................................................................................................... 2 • Warranty ........................................................................................................................................................ ...
-
Craftsman 315.11445 - page 3
WARNING: Read and understand all instructions. Failure to fellow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • Do not operate power tools in explosive atmo- spheres, ...
-
Craftsman 315.11445 - page 4
SERVICE • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. • When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Main ...
-
Craftsman 315.11445 - page 5
,_, WARNING: Read and understand all instruc- tions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. • Never use a battery that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped battery immediately. Failure to heed ...
-
Craftsman 315.11445 - page 6
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better andsafer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) min Minutes Time "X, Alternating Cu ...
-
Craftsman 315.11445 - page 7
SPECIFICATIONS Chuck Motor Switch Gear Train 3/8 in. (10 mm) Keyless 14.4 Volt DC Variable Speed One Speed No Load Speed Clutch Charger Input Charge Rate Torque 0-600/min. 24 Positions 120 V, 60 Hz, AC only 3-6 Hours Maximum 100 in.lb. Before using this tool, familiarize yourself with all operating features and safety requirements. However, do not ...
-
Craftsman 315.11445 - page 8
INSTRUCTIONS When unpacking the drill: • Carefully remove the tool and accessories from the box. • Make sure that all items listed in the packing list are in- cluded. • Inspect the tool carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have care- fully inspected and satisf ...
-
Craftsman 315.11445 - page 9
WARNING: Always wear safety goggles or safety glasses with side shields when operating this toot. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. ,_ WARNING: Exercise caution when using this tool. Careless actions, for even a fraction of a second, can result in serious personal injury. CHA ...
-
Craftsman 315.11445 - page 10
REVERSIBLE See Figure 3. This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the ...
-
Craftsman 315.11445 - page 11
KEYLESS CHUCK See Figure 5. The drill has a keyless chuck. As the name implies, you can hand tighten or release drill bits in the chuck jaws. Grasp and hold the collar of the chuck with one hand. Rotate the chuck body with your other hand. The arrows on the chuck indicate which direction to rotate the chuck body in order to LOCK (tighten) or UNLOCK ...
-
Craftsman 315.11445 - page 12
REMOVING BITS See Figure 7. • Lock switch trigger or the drill by placing the direction of rotation selector in center position. See Figure 2. • Loosen the chuck jaws from drill bit. • To loosen: grasp and hold the collar of the chuck with one hand, while rotating chuck body with your other hand. Note: Rotate chuck body in the direction of th ...
-
Craftsman 315.11445 - page 13
,_ WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. DRILLING See Figure 10. ,_ WARNING: Be prepared for binding or bit breakthrough. When these situations occur, drill has a tendency to grab and ki ...
-
Craftsman 315.11445 - page 14
CHUCK REMOVAL See Figures 12, 13, and 14. The chuck must be removed in order to use some accessories. To remove: • Lock switch trigger or the drill by placing the direction of rotation selector in center position. See Figure 2. • Insert a 5/16 inch or larger hex key wrench into the chuck of the drill and tighten the chuck jaws securely. MALLET ...
-
Craftsman 315.11445 - page 15
,_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil ...
-
Craftsman 315.11445 - page 16
r r r r r r r r r 16 ...
-
Craftsman 315.11445 - page 17
CRAFTSMAN 318 in., 14.4 VOLT CORDLESS DRILL-DRIVER - MODEL NO. 315.114450 ,_, _The model number will be found on a plate attached to the motor housing. Always mention the model | number in all correspondence regarding your 3/8 in., 14.4 VOLT CORDLESS DRILL-DRIVER or when | ordering repair parts. ° . J SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS ...
-
Craftsman 315.11445 - page 18
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door o ...
¿Tienes una pregunta acerca de Craftsman 315.11445?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Craftsman 315.11445, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Craftsman 315.11445 probablemente compartirá una forma de solucionarlo.