Español dropdown-ico

Manual de instrucciones HiRO H50113

36 de páginas No relevante
Descargar

Pasar a la página of 36

Summary
  • HiRO H50113 - page 1

    Hiro H50113 1 ...

  • HiRO H50113 - page 2

    Hiro H50113 1 System Requirements  Computer with Pentium 200 M MX or higher processor.  Windows 2000, Windo ws XP Home / Professional, XP Professional x64 Edition, Vista 32 / 64 F amilies, Windows 7 32 / 64 Families, and Windows Server 2003, 2008 R2 64- bit.  20 MB Hard Disk free space or above  Sound card for voice features  1 avail ...

  • HiRO H50113 - page 3

    Hiro H50113 2 Hardware Setup This chapter contains detailed instructions ho w to inst all and configure the 56Kbps USB modem, as well as how to verify if your installation is correct. We recommend that you follow the steps accordingly to avoid future problems. ESD Precautions Electrostatic discharge (ESD) can damage your processor , disk drives, ex ...

  • HiRO H50113 - page 4

    Hiro H50113 3 a. Locate an available RJ-11 modular j ack telephone outlet. b. Insert one end of the modular cord that came with your USB 56Kbps modem into the RJ-11 modular jack marked “LINE” on the modem. Then plug the other end into the modular jack on wall outlet. See below Figure. c. Plug the RJ-11 jack of the telepho ne set into the RJ-11 ...

  • HiRO H50113 - page 5

    Hiro H50113 4 Configure the Modem on Win98 / WinME / Win2000 / WinXP / 2003 / Vist a / 2008/ Win7 1. Please turn on your computer. For Windows 98/2000/ME/XP/2003 User: As Windows starts, it will detect a new hardware has been plugged or added, and start the " A dd New Hardware Wizard / Found New Hard ware Wizard " . Click on " Cancel ...

  • HiRO H50113 - page 6

    Hiro H50113 5 3. Click " Run autorun. exe " . (For Windows Vist a/2008/7 User only) 4. T he CD should auto-start, displaying the follo wing windows. If it does not start properly , please click on S tart – Run and t ype in CD:autorun.exe (where CD is as the location of the CD-ROM driver) . ...

  • HiRO H50113 - page 7

    Hiro H50113 6 5. For Security reasons Windows 7/Vista requires the installer program to have administrator privileges so t he new policy called " User A ccount Control " has been introduced in Windows 7/Vista. If UAC is enabled Windows pops up a window " User A ccount Control " Windo ws need your permission to continue. User nee ...

  • HiRO H50113 - page 8

    Hiro H50113 7 7. Click " OK " . 8. Click " OK " . (For Windo ws 98 User only ) 9. Browse to CD:DriverWIN9X (where CD is as the location of the CD-ROM driver) and then click " OK " . (For Windo ws 98 User only) ...

  • HiRO H50113 - page 9

    Hiro H50113 8 10. Click " Install / Yes " to finish the installation. (For Windows 2008/7 User only) Note: - If you can not perform thes e procedures smoothly as above, please perform the file directly: CD:Autorun.exe (Where CD is the drive letter of your CD-ROM drive) ...

  • HiRO H50113 - page 10

    Hiro H50113 9 How to Setup Modem-On-Hold In order to use Modem-On- Hold feature, please make s ure that yo ur ISP (Internet Service Provider) supports V.92 sta ndard, and your local phone company supports Call-Waiting & 3-Way calling on your phone line. 1.Windows  Vista  or  7  may  already  have  the  driver  built ? ...

  • HiRO H50113 - page 11

    Hiro H50113 10 2.Install  the  driver  accordingly,  and  then  restart  the  computer.  Pleas e  verify  the  driver  version:  a.Look  for  the  “ My  Computer ”  icon  on  your  desktop  or  “ Computer ”  from  your  starting  menu.  Right ‐ ...

  • HiRO H50113 - page 12

    Hiro H50113 11 b.Look  for  the  “ My  Computer ”  icon  on  your  desktop  or  “ Computer ”  from  your  starting  menu.  Right ‐ click,  then  select  “ Properties ”  ...

  • HiRO H50113 - page 13

    Hiro H50113 12 c.On  the  device  mana ger,  please  loca te  the  line  “ Modems ”  and  expand  it.  Please  then  double ‐ click  on  the  sub ‐ line  and  bring  out  the  modem’s  properties.  ...

  • HiRO H50113 - page 14

    Hiro H50113 13 d.On  the  Modem  Properties,  please  click  on  the  Driver  tab  and  verify  that  the  version.  For  H50006,  H50113,  &  H50158,  it  is  2.2.98.0 .  For  H50159,  it  should  be  2.7.1.0 .  ...

  • HiRO H50113 - page 15

    Hiro H50113 14 3.For  SoftMOH  procedure,  please  open  the  driver  CD  then  “Software”  folder,  and  copy  the  SOFT_MOH_1790_1  folder  onto  your  desktop.  Or,  please  create  a  new  folder  on  your  desktop,  download  &  unzip  the ? ...

  • HiRO H50113 - page 16

    Hiro H50113 15 4.Double ‐ click  on  the  file  " LtMOH.exe .”  ...

  • HiRO H50113 - page 17

    Hiro H50113 16 5.The  purple  'a'  should  appear  on  the  task  bar.  Left ‐ double ‐ click  on  the  purple  ‘a’  and  you  can  bring  up  the  Soft  MOH  menu.  Please  modify  the  setup  as  you  prefer,  and  then  click ? ...

  • HiRO H50113 - page 18

    Hiro H50113 17 6.Right ‐ click  on  the  purple  ‘a’  on  the  taskbar,  and  this  should  bring  up  the  alternative  menu.  Please  check  the  option  “Start  Automatically”  so  it  won’t  have  to  be  manually  activated  every  time ...

  • HiRO H50113 - page 19

    Hiro H50113 18 7.If  you  do  not  see  the  purple  ‘a’  on  the  task  bar,  please  move  the  mouse  cursor  to  the  blank  area  of  task  bar,  then  right ‐ click  and  choose  'Properties'.  ...

  • HiRO H50113 - page 20

    Hiro H50113 19 8.As  the  new  windows  of  " Taskbar  &  Start  Menu  Properties "  coming  out,  click  on  the  tab  " Taskbar ",  then  click  on  the  button  " Customize ".  ...

  • HiRO H50113 - page 21

    Hiro H50113 20 9.A  2nd  window  will  pop  out  and  allow  user  to  change  whether  the  icon  should  appear  and  notify  or  not.  Plea se  scroll  up/down  to  locate  the  purple  'a'  ( LSI  MOH  Application )  and  change  the ...

  • HiRO H50113 - page 22

    Hiro H50113 21 10.Or  user  can  simply  checks  the  option  on  the  bottom  of  window,  " Always  show  all  icons  and  notifications  on  the  task bar ",  which  will  show  everything,  including  the  MOH  application.  11.Click  “OK ...

  • HiRO H50113 - page 23

    Hiro H50113 22 Commands Most people use the comm unication sof tware programs to tell modems what to do. Therefore, you may not use the commands in this chapter . However , if you prefer to communicate with your modem directly , you can type the commands de scribed below . Here describes ho w to work in the terminal mode. T yping Commands  Use t ...

  • HiRO H50113 - page 24

    Hiro H50113 23 Place a pause before and after t he esca pe sequence to prevent the modem from interpreting the escape sequence a s data. The length of the pause is set by register S12, the esca pe guard time. Register S2 identifies the escape sequence chara cter. A/—Repeat Last Command Use this command to repeat the last AT command. T he modem re ...

  • HiRO H50113 - page 25

    Hiro H50113 24 Command Function E0 Disables echo command. E1 Enables echo command (default). B<value>—Communication Standard Setting Use this command to sele ct the communication stand ard used by the soft modem. Result code s: _ OK if <value> = 0—3, 15, 16. _ ERROR if <value> ≠ 0—3, 15, 16. Command Function B0 Selects ...

  • HiRO H50113 - page 26

    Hiro H50113 25 C<value>—Carrier Con trol This command is supported to ensure compatibility with communications softwa re that issues the C1 command. However, this modem does not su pport the C0 command. The C0 command instructs som e modems not to send carrier (i.e., it puts them in receive-only mode). Result code s: _ OK if <value> = ...

  • HiRO H50113 - page 27

    Hiro H50113 26 I<value>—Request ID Information Use this command to display prod uct information about the modem. In each case the information is transmitted to the host system followed by a final result code. Result code s: _ As described in Table 8 if <value> = 0—9, 11. _ ERROR if <value> ≠ 0—9, 11. I<value>—Re ...

  • HiRO H50113 - page 28

    Hiro H50113 27 H<value>—Hook Contro l Instructs the modem to go on-hook to di sconnect a call or go off-hook to make the telephone line bu sy. Result code s: _ OK if <value> = 0—1. _ ERROR if <value> ≠ 0—1. Command Function H0 The modem goes on-hook (default). H1 The modem goes off-hook. M<value>—Speake r Contro ...

  • HiRO H50113 - page 29

    Hiro H50113 28 N<value>—Modulation Hand shake Use this command to set the modem protocol for handling handshake negotiation at con nection time if the communication speed of the remote modem is different from the sp eed of the local modem. Result code s: _ OK if <value> = 0—1. _ ERROR if <value> ≠ 0—1. O<value>— ...

  • HiRO H50113 - page 30

    Hiro H50113 29 Command Function O0 Instructs the modem to exit on-line command mode and return to data mode O1 Issues a retrain before returnin g to on-line data mode. O3 Issues a rate renegotiatio n before returning to on-line data mode. P—Select Pulse Dialing Use this command to configure the modem for pulse dialing. All subsequent D<dial_st ...

  • HiRO H50113 - page 31

    Hiro H50113 30 Q<value>—Result Code Control Result codes are informatio nal messages sent from the modem and displayed on the monitor. Basic result codes include OK, CONNECT, RING, N O CARRIER, and ERROR. Us e the Q<value> command to en able or disable result code generation by t he modem. If result co des are disa bled and an invalid ...

  • HiRO H50113 - page 32

    Hiro H50113 31 W<value>—Result Cod e Option Use this command to select the modems CO NNECT message options. Result code s: _ OK if <value> = 0—2. _ ERROR if <value> ≠ 0—2. Command Function W0 CONNECT re sult code reports DTE re ceive speed. Disables protocol re sult codes. W1 CONNECT re sult code reports DTE re ceive sp ...

  • HiRO H50113 - page 33

    Hiro H50113 32 Command Function Z0 Reset and restore stored profile. Z1 Reset and restore stored profile. Troubleshooting This appendix contains inf ormation that will help you to solve some of the common problems you might enco unter , while using this 56Kbps USB modem. For further assi stance, co ntact your dealer . Modem does not respond to A T ...

  • HiRO H50113 - page 34

    Hiro H50113 33  Check the phone cord connectio n. Make sure that the jack on the modem labeled Line is conn ected to an an alog phone wall jack.  The modem cannot recog nize the dial tone. This i s typical in some corporate PBXs. Use the A TX1 command in your setup string to enable Blind Dial.  The modem does not ans wer an incoming call ? ...

  • HiRO H50113 - page 35

    Hiro H50113 34  The software may not be set for correct terminal emulation. Configure the soft ware to correct type. ANSI terminal emulation is the most commonly used.  T ype the A T&F command to load the factory default settings ...

  • HiRO H50113 - page 36

    Hiro H50113 35 ...

Fabricante HiRO Categoría Router

Los documentos del dispositivo HiRO H50113 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos HiRO
- manuales de instrucciones H50113
- hojas de producto HiRO
- folletos informativos
- o etiquetas energéticas HiRO H50113
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones HiRO H50113.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje HiRO H50113, instrucciones de servicio, instrucciones cortas o instrucciones de usuario HiRO H50113. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto HiRO H50113.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo HiRO H50113, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar HiRO H50113. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de HiRO H50113.

El manual de instrucciones completo de HiRO debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual HiRO H50113 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice HiRO H50113, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de HiRO H50113 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo HiRO H50113 - que deben facilitarnos los primeros pasos durante el uso de HiRO H50113
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con HiRO H50113
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de HiRO H50113 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de HiRO H50113?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con HiRO H50113, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con HiRO H50113 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)