-
Ricoh RDC-6000 - page 1
Operation Manual To ensure correct use of your digital camera, read this manual carefully before use. Keep the manual handy for future reference. ...
-
Ricoh RDC-6000 - page 2
Introduction Thank you for purchasing a Ricoh digital camera. This manual explains the correct handling procedures and precautions for your camera. To ensure the best performance, please read the manual thoroughly before using the camera. Keep the manual handy for quick future reference. Ricoh Co., Ltd. Test Shots Check that your camera is recordin ...
-
Ricoh RDC-6000 - page 3
1 R Warning R Caution o m Safety Precautions Warning Symbols Various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below. This symbol indicates matters that may lead to death or serious injury if ignored or i ...
-
Ricoh RDC-6000 - page 4
2 R Warning o ● Turn off the power immediately if any metallic object, water, liquid or other foreign object gets into the equipment. Remove the batteries as soon as possible, being careful to avoid electric shocks or burns. If you are drawing power from a household electrical outlet, be sure to unplug the power cord from the outlet to avoid fire ...
-
Ricoh RDC-6000 - page 5
3 R Warning ● Please observe the following in order to prevent fire, electrical shock or cracking due to the adapter. • Use only the indicated power supply voltage. Also avoid bunching wiring and extension cords. • Do not damage, bundle or alter power cords. Also, do not place heavy objects on power cords, or strongly pull or bend power cords ...
-
Ricoh RDC-6000 - page 6
4 R Warning m ● Do not use the equipment near flammable gases, gasoline, benzine, thinner or similar substances to avoid the risk of explosion, fire or burns. ● Do not use the equipment in aircraft or other locations where usage is restricted or prohibited as this may lead to disasters or accidents. ● Wipe off any dust that accumulates on the ...
-
Ricoh RDC-6000 - page 7
5 Observe the following precautions to ensure safe use of this unit. R Caution ● Contact with fluid leaking from a battery can lead to burns. If part of your body comes in contact with a damaged battery, wash the area with water immediately. (Do not use soap.) If a battery starts to leak, remove it immediately from the equipment and wipe the batt ...
-
Ricoh RDC-6000 - page 8
6 CONTENTS Safety Precautions ............................................................................... 1 Camera Features ................................................................................. 9 Parts & Names ................................................................................... 10 Explanation of LCD Monitor Displa ...
-
Ricoh RDC-6000 - page 9
7 Special Shooting Functions .............................................................. 50 Recording Motion Picture Mode ......................................................... 50 Changing the Flash Mode ................................................................... 51 Setting the Exposure Modes .......................................... ...
-
Ricoh RDC-6000 - page 10
8 Chapter 5 MISCELLANEOUS Transferring Images to a PC ............................................................. 90 Installing Camera Utility Software ....................................................... 90 Changing Camera Settings ................................................................ 93 Formatting SmartMedia ...................... ...
-
Ricoh RDC-6000 - page 11
9 Camera Features ● 2,140,000-pixel resolution compact camera With a 2,140,000-pixel resolution CCD, the compact camera produces high-quality, high- resolution images (1600 × 1200). The camera is so light you can carry it with you anywhere. ● Immediate recording Using the camera is as simple as clicking the shutter release button. Images thus ...
-
Ricoh RDC-6000 - page 12
10 Bac k Parts & Names ■ Camera Body F ront Cancel Button Shutter Release Button Mode Dial Flash Light ··· P.52 Self Timer LED ··· P.59 Flash Senser Remote Senser ··· P.101 LENS LCD Panel ··· P.14 PIC (Image Quality) Button ··· P.42 Self Timer Button ··· P.59 Flash Mode Button ··· P.51 Viewfinder Power Supply Cover ··· ...
-
Ricoh RDC-6000 - page 13
11 ■ Bottom Battery Cover ■ Remote Control Unit (Optional) (DR-3) ■ SmartMedia Memory Card ■ AC Adapter (100V – 240V) ■ Rechargeable Battery DB-20 SmartMedia Memory Card Cover Tripod Screw Hole Brightness Adjustment ··· P.35 RELE ASE ERASE FW D PROGRA M EV MULTI REV ENTER DR - 3 REMOTE CONTROLLER MADE IN JAPAN Label Position Write Pr ...
-
Ricoh RDC-6000 - page 14
12 Explanation of LCD Monitor Displays The LCD monitor or the LCD panel displays symbols and figures showing the status of your digital camera, such as the battery level, the number of pictures that can be taken, and the mode settings. LCD Monitor ■ Motion Picture Mode Display ■ Playback Mode Display 10:12 2000/05/15 ISO200 MANUAL 1/500 9999 EV ...
-
Ricoh RDC-6000 - page 15
13 • All items of information are shown for illustration purposes. During actual camera operation, only the relevant items are displayed. ■ Warning Message If any of the warning messages listed below appear on the camera’s LCD monitor, read the corresponding explanation and take the corrective action suggested. Note Warning Message Status Exp ...
-
Ricoh RDC-6000 - page 16
14 Playback/Erasure Error Message Explanation and Remedy Reference Page The SmartMedia memory card is unformatted. Format the card with the camera before using it. A SmartMedia memory card of this type is not supported by this camera. Use another type of SmartMedia. P.31 P.29 CARD ERROR Note If the above remedies are carried out and the error displ ...
-
Ricoh RDC-6000 - page 17
15 Note • Only the Motion Picture mode [ ] , PIC mode [F,N] and battery mark [ ] are displayed when the motion picture mode is set. ■ Error display and countermeasure When the following error is displayed, check the cause and take the proper countermeasure. Error display Countermeasure Reference • The SmartMedia is not formatted. Use this cam ...
-
Ricoh RDC-6000 - page 18
16 FORMAT: ................... Formats a SmartMedia memory card. (P.31) DATE SETTING: ........ Sets the date and time. (P.33) KEEP SETTINGS: ...... Saves camera settings. (P.94) AUTO POWER OFF: ............................ Enables or disables the camera (P.95) AUTO LCD OFF ......... Enables or disables the LCD (P. 96) LANGUAGE: .............. Switc ...
-
Ricoh RDC-6000 - page 19
17 RECORDING MODE: ........................ Switches between recording modes, such as still picture, text, quick shooting (P.43). GRID TEMPLATE ...... Sets crossed lines to assist with image taking. (P.63) WHITE BALANCE: .... Switches between the white balance settings (P.56). EXPOSURE MODE: ... PROGRAM and AV F NO setting. (P.53) IMAGE ENLARGEMENT ...
-
Ricoh RDC-6000 - page 20
18 ■ Erase Menu With the camera turned on, set the mode dial to [ ]. To exit the erase menu, set the mode dial to another mode. • The [ ] setting on the mode dial is used to take motion picture mode. • The [ ] setting on the mode dial is used to transfer image files from the camera to a PC. SINGLE IMAGE: ........ Erases selected images one at ...
-
Ricoh RDC-6000 - page 21
19 Loading the Batteries (P.25-26) q Load the batteries into the camera. Charge the batteries before loading. (P.27) * When using an AC adapter, connect it to the camera and then to the AC outlet. (P.27) Inserting a SmartMedia Memory Card (P.29-32) q Make sure that the camera is turned off. w Open the card cover and insert a SmartMedia memory card. ...
-
Ricoh RDC-6000 - page 22
20 Shooting Setting the Date and Time (P.33-34) q Slide the power switch and set the mode dial to [SET]. w Press the ▼ or ▲ button to select [DATE SETTING]. e Press the ENTER Select button. r Press the ▼ or ▲ button to change the digit. t Press the MENU button. Repeat steps r and t above to complete the settings. * Each time you press the M ...
-
Ricoh RDC-6000 - page 23
21 Playback Changing the Flash Mode (P.51-52) q Set the mode dial to [ ]. w Press the flash mode button to select a flash mode. You can choose Flash Off ( ), Auto ( ), Forced Flash ( ), or Slow synchro mode ( : flashing). The selected mark will be displayed on the LCD monitor or on the LCD panel. e Press the shutter release button to record the ima ...
-
Ricoh RDC-6000 - page 24
22 Erasing Erasing Files (P.86-88) q Slide the power switch on and set the mode dial to [ ]. w Press the ▼ or ▲ button to select the erase mode and press the ENTER Select button. * Remember that files cannot be restored once they are erased. Before starting to erase a file, make sure that you want to erase it. If you selected [SINGLE IMAGE] e P ...
¿Tienes una pregunta acerca de Ricoh RDC-6000?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Ricoh RDC-6000, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Ricoh RDC-6000 probablemente compartirá una forma de solucionarlo.