-
Haier HWM130-0523S - page 1
T win-tub Washing Machine User's manual Model: HWM130-0523S Please read this manual carefully before using. Retain it for future reference. ...
-
Haier HWM130-0523S - page 2
Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Packing list *Specification Names of the parts Trouble-Shooting *Answer to question ...
-
Haier HWM130-0523S - page 3
Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Contents marked with that sy ...
-
Haier HWM130-0523S - page 4
Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily to b ...
-
Haier HWM130-0523S - page 5
Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. T ake special care of the children. Safety precautions Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself. Handicapped or children without care shall not ...
-
Haier HWM130-0523S - page 6
Put the underside of the lint filter into overflow filte r then push the upside into overflow filter After installation, please refer that the lin t filter installed to the right station, otherwise the lint filter may be fallen off when washing, influencing your use. overflow fi lter lint f ilter Installa tion and adjustment Please install and adju ...
-
Haier HWM130-0523S - page 7
How to change the direction of the drain hoses Install the water inlet hose; Select the water level Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Figure 1 indicates the ex factory installation position of the drain hose. Put soft items on the ground. Lean the machine down gently w ...
-
Haier HWM130-0523S - page 8
Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please mak ...
-
Haier HWM130-0523S - page 9
Ï´µÓ¼ÁµÄʹÓà The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influ- ence the actual washing ...
-
Haier HWM130-0523S - page 10
Washing sequence Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Spin timer SPIN WASH Wash timer WASH TIMER Wash selector Buzzer Water-filling entrance (To set to below 2 minutes, first set to 5 minutes then turn it back. it can increase the service life of the timer). (standard current, strong current) (The buzzer will ring when the washing finishes) ...
-
Haier HWM130-0523S - page 11
1 2 Set the inlet selector handle on spin side and fill water for about 1 min. Close the spin tub outer cover and spin for about 1 - 2 min. In case water flows out from wash tub side due to too much inflow , please turn down the water tap a bit. Midway spinning Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laun ...
-
Haier HWM130-0523S - page 12
Rinse with stored water Rinse with water-filing 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is few, please use "ST ANDARD" current. If you use "STRONG" curr ...
-
Haier HWM130-0523S - page 13
1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop ...
-
Haier HWM130-0523S - page 14
Page 4 After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the overflow filter The lint filter must be used during washing. It must be cleaned in time after each u ...
-
Haier HWM130-0523S - page 15
Ï´ºó´¦Àí Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean ...
-
Haier HWM130-0523S - page 16
When the remained water is frozen Prevent the freezing (be sure to discharge the water completely after using) After complete draining, set the "WASH SELECTOR" at "STRONG" or "STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt. When the water is frozen Pour hot water ...
-
Haier HWM130-0523S - page 17
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena T ...
-
Haier HWM130-0523S - page 18
W ater inlet hose Gland Packing list Twin-tub washing machine Name Quantity User's manual One piece One piece One piece One set Specification W ater level W ater quantity about (L) Maximum/99 Medium/77 Minimum/65 Injection pressure(MPa) 0.02~0.2 16 10.0/6.0 Rated washing /spinning capacity(kg) ...
¿Tienes una pregunta acerca de Haier HWM130-0523S?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Haier HWM130-0523S, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Haier HWM130-0523S probablemente compartirá una forma de solucionarlo.