-
Konica Minolta 300 - page 1
OXYGEN SA TURA TION MONITOR PULSOX -300 ® -300 ® -300 Instruction Manual Th is in str um ent mu st be us ed ac cor di ng to th e i nst ru cti ons o f t he do cto r . ...
-
Konica Minolta 300 - page 2
Safety Symbols W arnings and precautions noted in this manual and the instrument are indicated by the following markings, designed to prevent accidents caused by erroneous handling of the equipment. This indicates text consisting of a warning or precaution relating to safety . Please read the text carefully and use the equipment safely . This indic ...
-
Konica Minolta 300 - page 3
1 Foreword S a f e t y P r e c a u t i o n s T o ensure correct use of this instrument, read th e following points carefully and adhere to them. After you have read this manual, keep it in a safe place where it can be referred to anytime a question arises. W A R N I N G (Failure to adhere to the following points may result in death or serious injur ...
-
Konica Minolta 300 - page 4
2 Foreword CAUTION (Failure to adhere to the following points may result in injury or damage to the in- strument or other property .) strument or other property .) Do not use batteries other than those specified by KONICA MINOL T A SENSING, INC. When installing batteries in the instrument, make sure t hat they are correctly oriented according to th ...
-
Konica Minolta 300 - page 5
3 Foreword Contents Safety Symbols Safety Precautions ............................................................. 1 Foreword ............................................................................ 4 Safety Notes .......................................................................... 4 Package Contents ..................................... ...
-
Konica Minolta 300 - page 6
4 Foreword Foreword Safety Notes CAUTION: Federal law restricts this device to sale by or on the order of a physician. The instrument is designed for measurement of the oxygen saturation (SpO 2 ) of arterial blood and the pulse rate. Do not use it for any other purposes, such as warning warning of sleep apnea and breathing abnormalities. The Oxygen ...
-
Konica Minolta 300 - page 7
5 Foreword Package Contents Before using the instrument, make sure that the following items are present. 1) PULSOX-300 main body × 1 2) Wristband WB-300 × 1 3) AAA-size alkaline battery × 1 4) Instruction manuals • PULSOX-300 instruction manual × 1 • Separate manual (Using manual for Probes) × 1 ✻ The probe is optional. About Probe The f ...
-
Konica Minolta 300 - page 8
6 Foreword System Diagrams and Accessories T he i ns t ru me nt co ns is t s of t h e fo ll o wi ng i t em s. Optional accessories Standard accessories Wristband WB-300 AAA-size alkaline battery Finger Clip Probe SR-5C Spot Check Probe SP-5C Monitor Probe LM-5C Personal Probe SD-5C Extension cable EC-300 Standard acc ...
-
Konica Minolta 300 - page 9
7 Foreword Names of Parts PULSOX-300 Power button Probe connector Wristband Battery co ver Used to start/end measurement. Measurement results and messages are displayed. Connect the probe to this connector . U se d t o s et t he in s tr um e nt o n yo u r w ri s t. T he c ov e r c a n b e op e ne d by turning it approximately 90 d e g re e s. Displ ...
-
Konica Minolta 300 - page 10
8 Foreword Notes on Use • This instrument should be used under the following operat- ing conditions. • T emperature of 0 to 40°C (32 to 104°F), relative humidity of 30 to 85%, with no condensation. • Atmospheric pressure of 700 to 1060 hPa (altitude of – 400 to 3000m). • This is a precision instrument. T o avoid the possibility of it be ...
-
Konica Minolta 300 - page 11
9 Foreword Difference from the SaO 2 value to displayed value <T able 1> <T able 2> Sa O 2 HbCO Sa O 2 Methemoglobin 1% 5% 10% 1% 5% 10% 50 50 70 70 90 90 100 100 Measured value is alway s lower than the actual value. Displayed value is sometimes higher than the actual value if Sa O 2 is around 50%. -0.1 -0.7 -1.5 +0.2 +1.3 +3.2 -0.2 -0 ...
-
Konica Minolta 300 - page 12
10 Foreword Notes on Storage • This instrument should be stored under the following storage conditions. • T emperature of – 10 to 60°C (14 to 140°F), relative humid- ity of 10 to 95%, with no condensation. • Atmospheric pressure of 700 to 1060 hPa (altitude of – 400 to 3000m). • When storing the instrument: • Do not store the instru ...
-
Konica Minolta 300 - page 13
1 1 Foreword Disposal Method • When disposing of the used battery , insulate the polarity ter- minals with insulating tape etc. If the terminals of the battery come into contact with metal objects, heat generation, explo- sion or fi re may result. • Make sure that the battery is either disposed of or recycled correctly in accordance with local ...
-
Konica Minolta 300 - page 14
12 Pre parati ons Preparations Before starting measurements using thi s instrument , follow the pro cedure give n bel ow to ensur e that meas ureme nts ar e sta ble. 1) Attaching the Wrist Band Attach the W rist Band WB-300 (supplied as a standard accessory) to the instrument. Since the WB-300 is made of elastic material, it allows for fl exibilit ...
-
Konica Minolta 300 - page 15
13 Pre parati ons 4 Pass th e other end of the band outward through band fi xture B. ◆ T ake care not to twist the band. the band. 2) Connecting the probe Connect the pr obeʼs connector plug into the Probe Connector on the instrument. ◆ Make sure that probeʼs connector plug is oriented correctly . ◆ Do not connect it in with excessive forc ...
-
Konica Minolta 300 - page 16
14 Pre parati ons 3) Installing the battery Procedure 1 Turn the battery cover clockwise approximately 90 degrees to open the cover . ◆ When turning the cover , keep the flat part of your finger on the coverʼs catch. This facilitates opening the cover with minimum force. 2 Insert the battery into the battery comp artment according to the polarit ...
-
Konica Minolta 300 - page 17
15 M e a s u r em e n t Measurement 1) Starting the Measurement 1 A t t a c h t h e p r o b e t o a fi nger of an adult patient. 2 Press the Power button. ● The Power is ON, all the elements on the display are displayed for about 2 seconds, and then the display changes to the measurement display . ◆ Until the measurement value has been calcula ...
-
Konica Minolta 300 - page 18
16 M e a s u r em e n t 2) Reading the display When the instrument is turned ON, all the elements of the LED will light up. The pulse level, pulse rate and SpO The pulse level, pulse rate and SpO 2 2 value are displayed value are displayed during measurement. Pulse rate (P .R.) If an error occurs, an error message mainly a b o u t P. R . w i l l b ...
-
Konica Minolta 300 - page 19
17 M e a s u r em e n t 3) Ending the Measurement About Auto Power-Off function The instrument has an auto power-off function that operates independently . If no probe is connected to the PULSOX ( " C " b l i n k s ) o r n o p r o b e i s a t t a c h e d t o t h e p a t i e n t ( " L " blinks) continuously for more than 2 minute ...
-
Konica Minolta 300 - page 20
18 C he ck P o i nt s T rouble Shootings Error Messages The instrument display error messages when the error occurs. Check and correspond to them correctly . ...
-
Konica Minolta 300 - page 21
19 C he ck P o i nt s ...
-
Konica Minolta 300 - page 22
20 C he ck P o i nt s ...
-
Konica Minolta 300 - page 23
21 C he ck P o i nt s ? ...
-
Konica Minolta 300 - page 24
22 C he ck P o i nt s Maintenance and Inspection • Before using the inst rument, make sure that the re is no dam- ag e t o th e i nst rum ent , no d ama ge or wi re- bre aka ge in t he probe cable a nd the instrument op erates correctly and sa fely . Cleaning • Dampen a soft cloth with neutral detergent or water , wipe the instrument with it, t ...
-
Konica Minolta 300 - page 25
23 Appendix Specifi cation ■ Dual-wavelength pulse type (665nm/880nm) arterial blood oxygen satura- tion measuring instrument • Name: Oxygen Saturation Monitor • Model name: PULSOX-300 ■ Functions: • Measuring range: SpO 2 : 0 to 100% SpO 2 Pulse rate: 30 to 230 bpm • Accuracy: SpO 2 : ±2% SpO 2 (70 to 100% range, 1S.D.) Pulse rate: ? ...
-
Konica Minolta 300 - page 26
24 Appendix Probes (SR-5C, SP-5C, LM-5C, SD-5C) Probes (SR-5C, SP-5C, LM-5C, SD-5C) ■ LED-SPD probe ■ T ype • Finger Clip Probe SR-5C • Spot Check Probe SP-5C • Monitor Probe LM-5C • Monitor Probe LM-5C • Personal Probe SD-5C ✻ It can be used with one of Extension Cable EC-300 ■ Components that touch the body Cover: Polycarbonate ...
-
Konica Minolta 300 - page 27
25 Appendix Appendix Calculation Method for Displayed V alues <Pulse level meter> The pulse level meter displays the transmitted light amount ratio calculated by the following equation. The pulse level is indicated in eight levels (0 to 15%, full scale if over 10%). <Oxygen saturation (SpO 2 )> Updates the moving average of the oxygen s ...
-
Konica Minolta 300 - page 28
26 Appendix EMC Guidance Guidance and manufactures declaration - electromagnetic emissions Guidance and manufactures declaration - electromagnetic immunity The Oxygen Saturation Monitor Model PULSO X-300 is intended for use in the electromagnetic environment specified below. The customer or the user of the Model PULSO X-300 should assure tha ...
-
Konica Minolta 300 - page 29
27 Appendix Guidance and manufactures declaration - electromagnetic immunity The Oxygen Saturation Monitor Model PULSO X-300 is intended for use in the electromagnetic environment specified below. The customer or the user of the Model PULSO X-300 should assure that it is used in such anenvironment. Immunity test IEC 60601 T est level Compliance ...
-
Konica Minolta 300 - page 30
28 Appendix ■ Spectral Absorption of Hb and HbO 2 Absorption coefficient Wavelength Red light Infrared light Measurement Principle This instrumen t measures the oxygen satur ation (SpO 2 ) in arte- rial blood and pulse rate continuously in a non-invasive method by applying optical principles. by applying optical principles. With this instrument, ...
-
Konica Minolta 300 - page 31
29 Appendix R e l a t i o n b e t w e e n O x y g e n S a t u r a t i o n a n d P a r t i a l P r e s s u r e The relation between oxygen saturation (SpO 2 ) and oxygen partial pressure (PaO 2 ) is shown in the graph below . SpO 2 is the oxygen saturation as measured by pulse oximeters. oxygen saturation as measured by pulse oximeters. ■ Oxygen S ...
-
Konica Minolta 300 - page 32
AGGAKK ( AGGAKK ( AGGAKK 1 ) Printed in Japan 92 22-1 732 -25 © 2005-2006 KONICA MINOL T A SENSING, INC. Manufacturer 3 -9 1, D a is en -n i sh im ac h i, S ak a i- ku , S ak ai -s h i, O sa k a 59 0- 8 55 1, J a pa n ...
¿Tienes una pregunta acerca de Konica Minolta 300?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Konica Minolta 300, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Konica Minolta 300 probablemente compartirá una forma de solucionarlo.