Manuel d’utilisation Polycom KIRK ISDN

12 pages 0.26 mb
Télécharger

Aller à la page of 12

Summary
  • Polycom KIRK ISDN - page 1

    Polycom ® KIRK ISDN Interface Card User Guide ...

  • Polycom KIRK ISDN - page 2

    1. Introduction As alternative to the analogue interface to the PBX from the KIRK telecom solutions, the interface can now be digital according to the ISDN standar d. Note: For more information about the PBX setup, please contact your local PBX installer. The 2 Mbps KIRK ISDN Interface Card perfor ms a 32 channel digital interface. An advantage of ...

  • Polycom KIRK ISDN - page 3

    14129600-HD, Ed.008/ Page 3 2. Setting up the KIRK ISDN Inter face Card The KIRK ISDN Interface Card must be insta lled in Slot 0 (closest to AC main plug). Please refer to the KIRK ISDN Interface Card Installation Guide for more information about the installation of the KIRK ISDN Interface Card. The KIRK ISDN Interface Card is connected to the PBX ...

  • Polycom KIRK ISDN - page 4

    Preparing the KIRK Wireless Server 1500 for Use When preparing the KIRK Wireless Server 1500 for use it is necessary to use the Administration Program. In the Administra tion Program you change the flash software, register users, allow subscription of handsets and type the r equired pin code. 1 Open the Administration Program version 8. 09 or highe ...

  • Polycom KIRK ISDN - page 5

    3 In the Advanced Options tab, click Transfer Flash Code to CCFP . An Open dialog box appears. 4 Select the flash code in question ((1330 0180.KTB ), and then click Open . The flash software will be loaded to the system. Loading the flash can take a while. 5 In the Advanced Options tab, select the Allow Subscription checkbox. Note: After registrati ...

  • Polycom KIRK ISDN - page 6

    7 Click OK to accept the code. 8 In the Advanced Options tab, click Restart System . 9 Click Close to return to the main window. 10 From the main window, click the ISDN Registration to register users. 11 Under Current User Data , type the serial No., AC No., Local No. and Standby text, and then click Create . Once the handset details have been ente ...

  • Polycom KIRK ISDN - page 7

    14129600-HD, Ed.008/ Page 7 Configuring the ISDN IWU. To change setting or upgrade the protocol soft ware you use the administration software for the ISDN IWU. If not already installed, download the software from www.kirktelecom.com. 2.2 Setting up the connection 1 Connect the PC to the KIRK ISDN Interface Card (J5), and start the administration so ...

  • Polycom KIRK ISDN - page 8

    14129600-HD, Ed.008/ Page 8 2 Click File>setup connection . Click Disconnect and Select the correct comport. Click Connect and Close . Note the “Receive – success” message on the status bar. 2.3 Uploading new flash software to the ISDN IWU card. 3 Click Advanced and select Load Flash . An Flashload dialog box appears. 4 Click Start and sel ...

  • Polycom KIRK ISDN - page 9

    14129600-HD, Ed.008/ Page 9 2.4 Changing parameters and using feature. When opening the administration software the program will with the Function Commands tab selected. Here it is possible to en able or disable a list of features. 1. Call forward and Call forward reply timer. It is possible to activate call forward indi vidual on each handset subs ...

  • Polycom KIRK ISDN - page 10

    2. how to activate call forward. 1. Press the menu button on the handset and select EXT. SERVICE 2. Select CALL DIVERS. and select the wanted type of call forward. 3. Select FORWARD NUMBER and type the wanted call forward destination number. 3. How to deactivate call forward. 1. Press the menu button on the handset and select EXT. SERVICE 2. Select ...

  • Polycom KIRK ISDN - page 11

    14129600-HD, Ed.008/ Page 1 1 10. EEprom Key Param. This setting defines if it should be possible to transfer key information during connect. Normally this should be possible to be able to use phone banking and other dial-inn services. Under normal operations it does not cause any problems enabling both DTMF and Keypad information. 11. Default and ...

  • Polycom KIRK ISDN - page 12

    14129600-HD, Ed.008/ Page 1 2 the function that causes problems and try to do this in a situation where there is no ot her traffic on the system. Send the mail to KIRK. Remember to disable the trace information in the Protocol debug tab before shutting down the administration softwar e. ...

Fabricant Polycom Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilPolycom KIRK ISDN peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Polycom
- manuels d’utilisations KIRK ISDN
- fiches produit Polycom
- dépliants
- ou étiquettes-énergie Polycom KIRK ISDN
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Polycom KIRK ISDN.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Polycom KIRK ISDN, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Polycom KIRK ISDN. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Polycom KIRK ISDN.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Polycom KIRK ISDN, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Polycom KIRK ISDN par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Polycom KIRK ISDN.

Le manuel d’utilisation complet Polycom, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Polycom KIRK ISDN - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Polycom KIRK ISDN, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPolycom KIRK ISDN qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Polycom KIRK ISDN - qui devraient nous aider dans les premières étapes lors de l'utilisation Polycom KIRK ISDN
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Polycom KIRK ISDN
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Polycom KIRK ISDN dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Polycom KIRK ISDN?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Polycom KIRK ISDN, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Polycom KIRK ISDN il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)