-
Electrolux GSC5050W - page 1
GAS COOKER GSC 5050 W GSC 5050 WL GB ...
-
Electrolux GSC5050W - page 2
2 ...
-
Electrolux GSC5050W - page 3
3 CONTENTS Instructions for the user In structions for the installer Important Safety Information Description of the appliance Technical Features Using the appliance - Using the oven - Hints & Tips - Using the Grill - Using the Hob Maintenance and Cleaning Something Not Working Service & Spare Parts Customer Care Guarantee conditions 4 5 6 ...
-
Electrolux GSC5050W - page 4
4 IMPORTANT SAFETY INFORMATION Installation • This cooker must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. • This cooker is heavy. Take care when moving it. • Any gas installation must be carried out by a registered CORGI installer. • Remove all packaging before ...
-
Electrolux GSC5050W - page 5
5 DESCRIPTION OF THE APPLIANCE Cooker li d Control panel Oven door wi th glass Handl e do or Storag e com p artment Ad just able small f eet Hob semi-rapi d 2000 W rapid 2600 W semi -r apid 2000 W au xilia ry 1000 W 1 2 3 4 1. Front left burner (semi-rapid) 2. Back left burner (semi-rapid) 3. Back right burner (auxiliary) 4. Front right burner (rap ...
-
Electrolux GSC5050W - page 6
6 TECHNICAL FEATURES Free standing Classe 1 Hob Cover Pan support Front right Back right Front left Back left Enamelled Enamelled Rapid Auxiliary Semi rapid Semi rapid 2,60kW 1,00kW 2,00kW 2,00kW Oven Oven Oven power Grill Grill power Gas 3,20kW Gas 1,80kW Accessories Oven grid Roasting tray Roasting grid Chromed Enamelled Chromed Dimensions Height ...
-
Electrolux GSC5050W - page 7
7 USING THE APPLIANCE Before the First Use of the Cooker Remove all packaging both inside and outside of the cooker, before using it. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1 Lift the lid 2 Remove the oven accessories and ensure all packaging has been rem ...
-
Electrolux GSC5050W - page 8
8 ov en gr ill 1 2 3 4 5 7 8 9 6 Gas Mark Temperature o C 1 150 2 162 3 175 4 187 5 200 6 212 7 225 8 237 9 250 Use The oven can be used for traditional cooking, or for grilling, but not both functions simultaneously. The symbol on the knob corresponds to the symbol on the control panel. Off “9” Maximum “1” Minimum “Grill” Grill functio ...
-
Electrolux GSC5050W - page 9
9 Hints and Tips Condensation and steam When food is heated it produces steam in the same way as a boiling kettle. The oven vents allow some of this steam to escape. However, always stand back from the oven when opening the oven door to allow any build up of steam or heat to release. If the steam comes into contact with a cool surface on the outsid ...
-
Electrolux GSC5050W - page 10
10 Using the Grill Grill burner ignition 1. Open the oven door. 2. Hold a flame to the gas grill burner holes (see fig.). 3. Press the oven/grill function control knob, then turn it to the “grill symbol”. Upon ignition, keep the knob pressed for approximately 10 seconds (until the safety valve automatically keeps the grill burner lit). If for a ...
-
Electrolux GSC5050W - page 11
11 Using the Hob The Hob Burners The symbol on the knob corresponds to a symbol on the control panel (See description of appliance) Each burner has a safety device. In case the flame dies out the safety device stops the gas supply. Off Maximum level Minimum level Use the maximum level for boiling and the minimum for simmering. Always choose positio ...
-
Electrolux GSC5050W - page 12
12 Selecting the Correct burner Above every knob there is a symbol for the corresponding burner. For good cooking results, always chose pans, which properly fit to the diameter of the burner used (see figs). Chose thick, flat bottom pots. We recommend the flame is lowered as soon as the liquid starts boiling. For a correct ignition always keep the ...
-
Electrolux GSC5050W - page 13
13 MAINTENANCE AND CLEANING The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Before cleaning, ensure all control knobs are in the OFF position, and the appliance has cooled completely . Cleaning materials B e f o re using any cleaning materials on your oven, chec ...
-
Electrolux GSC5050W - page 14
14 DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panel may shatter. If the door glass panel becomes chipped or has deep scratches, the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Contact your local Service Centre who will be pleased to adv ...
-
Electrolux GSC5050W - page 15
15 SOMETHING NOT WORKING If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Force Service Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guara ...
-
Electrolux GSC5050W - page 16
16 SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 0 8 7 0 5 92 992 9 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force ...
-
Electrolux GSC5050W - page 17
17 GUARANTEE CONDITIONS Standard Guarantee Conditions We Moffat undertake that if, within 12 months of the date of the purchase, this Moffat appliance or any part thereof is proved to be defective by any reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials or car ...
-
Electrolux GSC5050W - page 18
18 INSTRUCTIONS FOR THE INSTALLER SAFETY ADVICE • Before installation ensure that the local distribution conditions (gas type and pressure) and the pre-setting of the appliance are consistent. • This appliance must be installed only in a room with good ventilation. • This appliance must not connected to a flu. It has to be installed and conne ...
-
Electrolux GSC5050W - page 19
19 INSTALLATION Positioning Remove all the packaging and install the cooker in a dry, ventilated room not near curtains, paper, alcohol, petrol etc. (See figure). This appliance is approved to class “1” regarding overheating of surrounding surfaces. It is mandatory to keep 20mm distance to the adjacent furniture. L.P.G. cookers or ovens MUST NO ...
-
Electrolux GSC5050W - page 20
20 Ventilation The room containing the cooker should have an air supply in accordance with B.S. 5440: Part 2: Current Editions. The following requirements for ventilation must be met. The cooker should not be installed in a bed sitting room with a volume of less than 20m 3 , if it is installed in a room of volume less 5m 3 an air vent of effective ...
-
Electrolux GSC5050W - page 21
21 GAS CONNECTIONS Your cooker is delivered adjusted for the kind of gas stated on the rating plate If the appliance is supplied with natural gas and the pressure for natural gas is 20mbar. The following methods of connection to the gas supply must be used: Right Hand Connection (from front) Ensure that the rubber hose is not in contact with any pa ...
-
Electrolux GSC5050W - page 22
22 The appliance flexible connector should not be subjected to undue forces either in normal use or whilst connected or disconnected; - The socket which the plug of the appliance flexible connector fits should be permanently attached to a firmly fixed gas installation pipe and positioned such that the appliance flexible connector hose hangs freely ...
-
Electrolux GSC5050W - page 23
23 CONVERSION OF GAS Your cooker is designed to work with natural gas, and is convertible for use with propane or butane. The LPG conversion kit is available from your Service Force Centre and must be fitted by a Corgi Registered engineer. For changing the gas type it is necessary to: • replace the nozzles (hob, oven and grill); • adjust the mi ...
-
Electrolux GSC5050W - page 24
24 Table no.2 Air adjusting (mm) Gas type Oven Grill G20 2,5 25,5 G30 3,5 30 G31 3,5 30 Hob burners To adjust the minimum level: • Light the burner • Turn the knob to the position of the minimum flame; • Remove the knob; • Unscrew or screw the by-pass screw (on the left above of tap shaft) until a regular small flame is reached. • For LPG ...
-
Electrolux GSC5050W - page 25
25 Flame adjustment Oven burners The burner is correctly adjusted when the flame is stable, silent and goes out without any noise. • When the flames are too short, the nozzle is whistling or the flames have the tendency to detach from the burner, it means that there is too much air in the valve. If there is too much air there is a risk that the f ...
-
Electrolux GSC5050W - page 26
26 Adjustment of minimum level Oven burner • Remove the top pan support as well as the burner caps and the burner crowns. • Unscrew and remove the 4 top plate fixing screws and remove the top plate. • Light the burner knob on position 9 and leave the oven door closed for about 10 min. • Turn the knob slowly to position 1. • Pull off the k ...
-
Electrolux GSC5050W - page 27
. ...
Avez-vous une question à propos de Electrolux GSC5050W?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Electrolux GSC5050W, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Electrolux GSC5050W il est probable qu’il a envie de partager la façon de le résoudre.