Français dropdown-ico

Manuel d’utilisation Murray 405000x8E

52 pages 2.28 mb
Télécharger

Aller à la page of 52

Summary
  • Murray 405000x8E - page 1

    The owner must be certain that all the product information is included with the unit. This information includes the INSTRUCTION BOOKS, the REPLACEMENT P ARTS and the W ARRANTIES. This information must be included to make sure state laws and other laws are followed. PRODUCT INFORMA TION This Instruction Book contains information for several models. ...

  • Murray 405000x8E - page 2

    2 F-050700L T ABLE OF CONTENTS W ARRANTY 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RESPONSIBILITY OF THE OWNER 3 . . . . . . . . . . . . . . . . . SAFETY RULES 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INTERNA TIONAL PICTORIALS 9 . . . . . . . . . . . . . . . . . . . . . ASSEMBL Y 10 . ...

  • Murray 405000x8E - page 3

    OWNER’S INFORMA TION 3 F-050700L This instruction book is for several different models. The instructions ar e written for a person with some mechanical ability . Like most ser- vice books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability . Read and follow these i ...

  • Murray 405000x8E - page 4

    OWNER’S INFORMA TION 4 F-050700L c. Do not turn sharply . Use care when backing. d. Use counterweights or wheel weights when suggested in the Instruction Book. 18. Do not operate this machine if you are taking drugs or other medication which can cause drowsiness or affect your ability to operate this machine. 19. Do not use this machine if you ar ...

  • Murray 405000x8E - page 5

    SAFE MOWING GUIDE 5 F-050700L Each person that operates power equipment must learn to use correct and safe mowing procedures. T o help you learn, carefully read the following pages. Most of the time the operator was not correctly shown or did not read the instructions on the unit or in the Instruction Book before using the unit. Also, some operator ...

  • Murray 405000x8E - page 6

    SAFE MOWING GUIDE 6 F-050700L mower was completely assembled at the store, you must still check the mower according to the assembly instructions. Make sure the mower is correctly assembled and that all fasteners are tight. Make sure the engine has the correct amount of oil. Check these items often during the life of the mower . Y our mower has a ga ...

  • Murray 405000x8E - page 7

    SAFE MOWING GUIDE 7 F-050700L Also, the grass bagger will function better when the engine is operating at maximum speed. On slopes, decrease the ground speed and use care making sure the mower feels safe to operate. If the weather conditions are bad, do not mow . If weather conditions become bad, stop cutting and finish later . It is dangerous to c ...

  • Murray 405000x8E - page 8

    STEPS T O FOLLOW 8 F-050700L BEFORE MOWING F Be sure to dress correctly . Wear hard shoes, not sandals or tennis shoes. F Examine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade. F Fill the fuel tank outside. Clean off spilled fuel. F Read and follow the Owner ’s Manual, the instructions with ...

  • Murray 405000x8E - page 9

    INTERNA TIONAL PICT ORIALS 9 F-050700L INTERNA TIONAL PICT ORIALS IMPORT ANT : Some of the following pic- torials are located on your unit or on literature supplied with the product. Be- fore you operate the unit, learn and un- derstand the purpose for each pictorial. Safety W arning Pictorials 1 W arning 2 Shield Eyes. Explosive Gases Can Cause Bl ...

  • Murray 405000x8E - page 10

    ASSEMBL Y 10 F-050700L ASSEMBL Y Read and follow the assembly and adjustment instructions for your mower . All fasteners are in the parts bag. Do not discard any parts or material until the unit is assembled. NOTE: In this instruction book, left and right describe the loca- tion of a part with the operator on the seat. W ARNING: Before doing any as ...

  • Murray 405000x8E - page 11

    ASSEMBL Y 11 F-050700L HOW TO INST ALL THE SEA T 1. Carefully remove the plastic bag from the seat. Us e the fasteners shown below to install the seat . The fasteners are shown at full size. (A) 1001054 (B) 17x47 NOTE: Fasteners may be attached to seat for shipping purposes, if so remove fasteners before proceeding. 2. Align the holes in the seat h ...

  • Murray 405000x8E - page 12

    ASSEMBL Y 12 F-050700L MAINTENANCE FREE BA TTER Y IMPORT ANT : Before you attach the battery cables to the battery , check the battery date. The battery date tells if the battery must be charged. 1. Check the top and the side of the battery for the location of the battery date (Figure 3). 2. If the battery is put into service before the battery dat ...

  • Murray 405000x8E - page 13

    ASSEMBL Y 13 F-050700L IMPORT ANT! BEFORE YOU ST ART MOWING - Check the engine oil. - Fill the fuel tank with gasoline. - Check the air pressure of the tires. - Check the level of the mower housing. - Make sure the battery cables are attached. - Make sure the wire is attached to the spark plug. W ARNING: Before doing any assembly or mainte- nance t ...

  • Murray 405000x8E - page 14

    OPERA TION 14 F-050700L Figure 4 Throttle Control Lever Blade Rotation Control Clutch / Brake Pedal Lift Lever Shift Lever LOCA TION OF CONTROLS BLADE RO T A TION CONTROL: Use the blade rotation control to start and stop the rotation of the blade and also to control various accessories, such as a snow thrower . CLUTCH / BRAKE PEDAL: T he pedal has ...

  • Murray 405000x8E - page 15

    OPERA TION 15 F-050700L A TT ACHMENTS This unit can use many different attachments. See the attachment page in this book. This unit can pull attachments like a lawn sweeper , a lawn aerator , a hopper spreader or a small trailer . This unit can not use attachments that engage the ground like a plow , a disk harrow , or a cultivator. For all pull-be ...

  • Murray 405000x8E - page 16

    OPERA TION 16 F-050700L HOW TO USE THE BLADE ROT A TION CONTROL The blade rotation control is next to the steering wheel (Figure 6). U s e the blade rotation control to engage the blade(s) or to operate a snow thrower attachment. 1. Before you start the engine, make sure the blade rotation con- trol is in the DISENGAGE position . 2. Move the blade ...

  • Murray 405000x8E - page 17

    OPERA TION 17 F-050700L HOW TO SET THE P ARKING BRAKE 1. Completely push the clutch/brake pedal forward. 2. Lift the parking brake lever (Figure 7). 3. Remove your foot from the clutch/brake pedal and then release the parking brake lever . Make sure the parking brake will hold the unit. 4. T o release the parking brake, completely push the clutch/b ...

  • Murray 405000x8E - page 18

    OPERA TION 18 F-050700L HOW TO OPERA TE WITH THE MOWER HOUSING W ARNING: Th e de fle ctor is a safety device. Do not re- move the deflector . The deflector forces the dis- charged material toward the ground. Always keep the deflector in the down position. If the deflector is dam- aged, replace the deflector with an original equipment part from an a ...

  • Murray 405000x8E - page 19

    OPERA TION 19 F-050700L BEFORE ST ARTING THE ENGINE CHECK THE OIL NOTE: The engine was shipped from the factory filled with oil. Check the level of the oil. Add oil as needed. See the engine manufacturer ’ s instructions for the type of gasoline and oil to use. 1. Make sure the unit is level. NOTE: Do not check the level of the oil while the engi ...

  • Murray 405000x8E - page 20

    OPERA TION 20 F-050700L OPERA TING TIPS 1. Check the blade rotation control for correct adjustment. For the blade(s) to disengage correctly , the adjustment must be cor- rect. 2. Before you use the unit, check the oil in the engine and add oil if necessary . 3. If the engine will not start, first make sure the wire is attached to the spark plug. 4. ...

  • Murray 405000x8E - page 21

    MAINTENANCE 21 F-050700L MAINTENANCE CHART PROCEDURE EACH USE FIRST 2 HOURS EVER Y 25 HOURS EVER Y 50 HOURS EVER Y 100 HOURS BEFORE STORAGE Blade, Inspect and Sharpen √ Blade Rotation Control, Check √ M Brake, Check √ M O W Clutch, Check √ W E T ires, Check √ √ E R Battery , Check and Charge √ √ Battery , Clean √ √ Lubrication * ...

  • Murray 405000x8E - page 22

    MAINTENANCE 22 F-050700L INSPECT BLADE W ARNING: Before you inspect or remove the blade, disconnect the wire to the spark plug. If the blade hits an object, stop the engine. Check the unit for dam- age. The blade has sharp edges. When you hold the blade, use gloves or cloth material to protect your hands. If you keep the blade sharp and inspect the ...

  • Murray 405000x8E - page 23

    MAINTENANCE 23 F-050700L HOW TO ADJUST THE BLADE ROT A TION CONTROL W ARNING: T o prevent an injury , the blade rotation control must operate correctly . In normal usage, the blade rotation control will not require an adjustment. However , if the cutting performance decreases or the quality of cut is poor , make the following changes. 1. When you m ...

  • Murray 405000x8E - page 24

    MAINTENANCE 24 F-050700L HOW TO CHECK AND ADJUST THE DRIVE BRAKE Completely push the clutch/brake pedal forward. Set the parking brake. Move the shift lever to the neutral (N) position. Push the unit. If the rear wheels rotate, adjust or replace the brake pads. Adjust the drive brake as follows. 1. The location of the drive brake is on the right si ...

  • Murray 405000x8E - page 25

    MAINTENANCE 25 F-050700L HOW TO ADJUST THE SHIFT LEVER If the NEUTRAL position on the shift lever does not match neutral on the gearbox, adjust the shift lever as follows. 1. Stop the engine. 2 . Disconnect the adjuster nut from the shifter bracket (Figure 18). 3. Make sure the shift lever is in the NEUTRAL position. 4. Push the unit forward. Make ...

  • Murray 405000x8E - page 26

    MAINTENANCE 26 F-050700L WHERE TO LUBRICA TE Lubricate the areas shown with engine oil. Apply grease with a brush to the areas shown. NOTE: Apply grease to the steering gear assembly . CAUTION: If the unit is operated in dry areas that have sand, use a dry graphite spray to lubricate the unit. HOW TO CHECK THE FUEL FIL TER NOTE: Before you replace ...

  • Murray 405000x8E - page 27

    W ARNING: The lift lever is spring loaded. Make sure the lift lever is locked in the LEVEL ADJUST- MENT position. Level Adjustment Position Figure 22 MAINTENANCE 27 F-050700L HOW TO REMOVE THE MOWER HOUSING 1. Move the blade rotation control to the DISENGAGE position. 2. Move the lift lever to the level adjustment position (Figure 22). 3. Remove th ...

  • Murray 405000x8E - page 28

    MAINTENANCE 28 F-050700L HOW TO LEVEL THE MOWER HOUSING If the mower housing is level, the blade will cut easier and the lawn will look better . W ARNING: Before you make an inspection, adjust- ment, or repair to the unit, disconnect the wire to the spark plug. Remove the spark plug wire to prevent the engine from starting by accident. 1. Make sure ...

  • Murray 405000x8E - page 29

    MAINTENANCE 29 F-050700L HOW TO REPLACE THE MOTION DRIVE BEL T REMOV AL 1. Remove the mower housing. See the instructions on “How T o Remove The Mower Housing”. 2. Completely push the pedal forward and engage the parking brake. 3. Remove the idler pulley (Figure 27). Idler Pulley Motion Drive Belt Loosen The Belt Guides Drive Pulley Figure 27 4 ...

  • Murray 405000x8E - page 30

    MAINTENANCE 30 F-050700L INST ALLA TION 1. Slide the motion drive belt between the stack pulley and the belt guides (Figure 30). Install the motion drive belt on the to p pulley of the stack pulley . Make sure the “V” side of the belt is against the pulley . 2. Push the motion drive belt through the opening between the steering plate and the en ...

  • Murray 405000x8E - page 31

    MAINTENANCE 31 F-050700L HOW TO REPLACE THE MOWER DRIVE BEL T 1. Remove the mower housing. See the instructions on “How T o Remove The Mower Housing”. 2. Pull the belt retainer away from the idler pulley and remove the mower drive belt (Figure 33). 3. Pull the belt retainer away from the right mandrel pulley and remove the mower drive belt . 4. ...

  • Murray 405000x8E - page 32

    MAINTENANCE 32 F-050700L HOW TO INST ALL THE WHEELS If the wheels must be removed for service, make sure they are installed as follows. Front Wheel 1. Make sure the valve stem is to the outside of the tractor . Slide the front wheel on the spindle (See Figure 34). 2. Fasten the front wheel with washer and cotter pin. Bend the ends of the cotter pin ...

  • Murray 405000x8E - page 33

    MAINTENANCE 33 F-050700L HOW TO REPLACE THE FUSE If the fuse is blown, the engine will not start. The location of the fuse is next to the battery . Remove the fuse and replace with a automotive fuse (Figure 36). Figure 36 Automotive Fuse HOW TO REPLACE THE LIGHT BULB 1. Raise the tractor hood. 2 . Tur n the light socket until the tabs on the socket ...

  • Murray 405000x8E - page 34

    TROUBLE SHOOTING CHART 34 F-050700L PROBLEM: The engine will not start. 1. Follow the steps, “How T o Start The Engine” in this book. 2. Electric-Start Models: Clean the battery terminals. T ighten the cables. 3. Drain the fuel tank. Clean the fuel line. Replace the fuel filter . 4. Remove the spark plug(s). Move the throttle to the SLOW posi- ...

  • Murray 405000x8E - page 35

    F-050700L 35 Only use a factory repair part. Repair parts, except for the engine or the transmission, are available from the store where th e unit was purchased, a service shop recommended by the store, or an authorized service shop found in the yellow pages of the telephone directory . If you cannot get a repair part or service as described above, ...

  • Murray 405000x8E - page 36

    REP AIR P ARTS MODEL 405000x8E 36 F-050700L CHASSIS & HOOD 58 58 57 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 24 21 22 23 25 26 27 30 29 28 51 31 32 33 34 35 31 36 37 38 16 39 40 41 42 49 16 16 43 44 45 16 46 47 16 16 2 50 70 53 31 52 16 48 59 55 ...

  • Murray 405000x8E - page 37

    REP AIR P ARTS MODEL 405000x8E 37 F-050700L CHASSIS & HOOD Key No. Part No. Description Key No. Part No. Description 1 690566 Seat 2 028x23 Cap, Push 0n 3 094057 Spring 4 26x229 Screw 5 1001054 Bolt, Wing 6 017x47 Z W asher 7 009x56 Bolt, Shoulder 8 094154E700 Support, Seat 9 094156 Z Rod, Pivot 10 1001648E700 Bracket, Pivot 1 1 001x45 Bolt 12 ...

  • Murray 405000x8E - page 38

    REP AIR P ARTS MODEL 405000x8E 38 F-050700L MOTION DRIVE 1 2 3 4 5 6 7 8 9 10 12 11 13 14 15 16 60 18 19 20 17 21 62 55 22 23 25 26 27 28 30 31 32 33 35 17 41 29 17 40 39 40 38 45 37 46 49 48 50 53 51 52 47 36 8 61 43 56 44 54 54 5 5 57 34 59 42 58 37 24 ...

  • Murray 405000x8E - page 39

    REP AIR P ARTS MODEL 405000x8E 39 F-050700L MOTION DRIVE Key No. Part No. Description Key No. Part No. Description 1 009x39 Bolt, Shoulder 2 015x89 Nut, Hex 3 690173 Z Arm, Idler 4 094041 Z Rod, Clutch 5 015x79 Nut 6 17x102 W asher 7 092697 Grip 8 030x20 Pin, Cotter 9 094043 Z Lever , Shift 10 017x47 Z W asher 1 1 094044 Z Link, Shift 12 021920 Z N ...

  • Murray 405000x8E - page 40

    REP AIR P ARTS MODEL 405000x8E 40 F-050700L STEERING 1 2 4 5 6 7 8 9 10 11 12 15 6 13 30 30 30 17 18 30 14 30 19 16 26 24 21 22 23 25 27 24 25 22 23 28 29 25 25 30 33 35 36 19 31 31 32 38 20 20 37 40 39 34 3 41 43 ...

  • Murray 405000x8E - page 41

    REP AIR P ARTS MODEL 405000x8E 41 F-050700L STEERING Key No. Part No. Description Key No. Part No. Description 1 095336 Wheel, Steering 2 690337 Post, Steering 3 095338 Cap, Steering Wheel 4 094124 Bearing † 5 15x1 1 1 Nut, Flange † 6 009x57 Bolt, Shoulder 7 1001893 Gear , Pinion † 8 01 1x25 Ring, Snap † 9 094121 Gear , Sector 10 094123 Bea ...

  • Murray 405000x8E - page 42

    REP AIR P ARTS MODEL 405000x8E 42 F-050700L MOWER HOUSING SUSPENSION 1 2 3 4 5 6 7 8 14 14 9 10 11 12 12 11 13 14 15 16 17 18 19 20 20 21 22 22 23 24 24 24 25 25 11 15 27 26 26 24 25 15 33 34 36 37 32 32 38 31 24 30 25 41 43 15 30 31 44 42 24 7 40 39 39 45 ...

  • Murray 405000x8E - page 43

    REP AIR P ARTS MODEL 405000x8E 43 F-050700L MOWER HOUSING SUSPENSION Key No. Part No. Description Key No. Part No. Description 1 092698 Grip 2 094157 Z Handle 3 094022 Z Pad, Switch 4 0025x3 Bolt 5 092697 Grip 6 166x40 Spring 7 17x103 W asher 8 690533 Handle, Lift 9 094017 Z Lever , PTO 10 009x39 Bolt, Shoulder 1 1 030x20 Pin, Cotter 12 017x57 W as ...

  • Murray 405000x8E - page 44

    REP AIR P ARTS MODEL 405000x8E 44 F-050700L MOWER HOUSING 52 1 2 55 1 2 3 6 24 4 25 24 12 8 22 20 19 9 54 7 10 13 14 11 15 16 17 51 18 5 22 22 21 23 22 17 33 50 53 14 22 26 5 28 5 48 23 22 17 22 22 6 27 24 26 10 11 8 20 21 5 23 22 30 29 17 14 13 47 15 9 5 19 31 32 33 44 43 42 33 33 34 41 36 42 37 38 39 40 38 39 40 35 37 36 34 33 33 33 5 23 32 45 17 ...

  • Murray 405000x8E - page 45

    REP AIR P ARTS MODEL 405000x8E 45 F-050700L MOWER HOUSING Key No. Part No. Description Key No. Part No. Description 1 092851 Pulley , Jackshaft 2 15x140 Nut, Hex 3 037x62 Belt, Mower Drive 4 690387 Pulley , Idler 5 015x84 Nut, Flange 6 1001 197 Spacer , Pulley 8 690212E701 Link, Lift 9 094137 Pad, Friction 10 009x52 Bolt, Shoulder 1 1 094055E701 Br ...

  • Murray 405000x8E - page 46

    REP AIR P ARTS MODEL 405000x8E 46 F-050700L ENGINE MOUNT 1 6 7 8 9 10 11 12 13 14 15 15 21 22 22 21 2 3 4 5 26 30 31 9f 9a 9d 9b 9b 9c 23 23 9e 32 ...

  • Murray 405000x8E - page 47

    REP AIR P ARTS MODEL 405000x8E 47 F-050700L ENGINE MOUNT Key No. Part No. Description 1 092317 Fuel Cap † 2 690280 Fuel T ank 3 095197 Hose Clamp † 4 7601033 Fuel Line (Must cut to length) † 5 095197 Hose Clamp † 6 26x201 Screw 7 094006E700 Plate, Engine 8 092371 Throttle Control 9 * Engine, BRIGGS & STRA TTON 9a 1001720 Muf fler 9b 091 ...

  • Murray 405000x8E - page 48

    REP AIR P ARTS MODEL 405000x8E 48 F-050700L ELECTRICAL SYSTEM 24x32 94159 24x31 1001993 94613 21075 94136 GEAR DRIVE TRACTOR * AFTERFIRE SOLENOID OPTIONAL WIRING HARNESS FOR: MAIN HARNESS: 250x138 SEA T : 250X139; LIGHT : 250X92 1001575 1001575 1 3 5 6 8 9 7 10 11 2 12 4 12 ...

  • Murray 405000x8E - page 49

    REP AIR P ARTS MODEL 405000x8E 49 F-050700L ELECTRICAL SYSTEM Key No. Part No. Description 1 250x92 Harness, Light Wire 1001716 Socket, Light 090084 Bulb, Light 2 250x138 Harness, Chassis Wire 3 1001993 Switch, Ignition 020729 Key , Ignition 091489 Nut, Hex 091488 Cap, Ignition 4 094136 Switch, Limit (PTO) 5 302031 Fuse 407078 Holder , Fuse 6 09461 ...

  • Murray 405000x8E - page 50

    50 F-050700L ...

  • Murray 405000x8E - page 51

    INDEX 51 F-050700L A Adjustments Blade Rotation Control, 23 Clutch, 24 Drive Brake, 24 Mower Housing, Level, 28 Shift Lever , 25 Attachments, 15, 52 B Battery Charge, 25 Check, 12 Clean, 25 Install, 12 Removal, 25 Storage, 33 Belt Motion Drive Adjust, 24 Replace, 29 Mower Drive Adjust, 23 Replace, 31 Blade Inspect, 22 Remove And Install, 22 Sharpen ...

  • Murray 405000x8E - page 52

    52 F-050700L LA WN TRACT OR ACCESSORIES Make your Lawn T ractor do more than you ever imagined. The accessories shown on this page can be used on your Lawn T ractor . See the Store or Dealer where you purchased your Lawn T ractor . If you are unable to obtain the necessary information, contact the Central Parts Distribution Center for your area as ...

Fabricant Murray Catégorie Lawn Mower

Les documents que nous recevons du fabricant de l'appareilMurray 405000x8E peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Murray
- manuels d’utilisations 405000x8E
- fiches produit Murray
- dépliants
- ou étiquettes-énergie Murray 405000x8E
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Murray 405000x8E.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Murray 405000x8E, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Murray 405000x8E. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Murray 405000x8E.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Murray 405000x8E, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Murray 405000x8E par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Murray 405000x8E.

Le manuel d’utilisation complet Murray, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Murray 405000x8E - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Murray 405000x8E, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lMurray 405000x8E qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Murray 405000x8E - qui devraient nous aider dans les premières étapes lors de l'utilisation Murray 405000x8E
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Murray 405000x8E
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Murray 405000x8E dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Murray 405000x8E?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Murray 405000x8E, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Murray 405000x8E il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)