Français dropdown-ico

Manuel d’utilisation Radio Shack PRO-433

40 pages 0.42 mb
Télécharger

Aller à la page of 40

Summary
  • Radio Shack PRO-433 - page 1

    Please read this user ’s guide before installing, setting up and using your new scanner . www .radioshack.com 20-433 PRO -433 1,000 ch T runking Desktop/Mobile Scanner Scanner AC adapter DC cable with fuse Antenna DIN sleeve Removal keys (2) Mounting bracket Knobs (2) Lock washers (2) Screws (2) Rubber feet (4) User ’s guide Preprogrammed frequ ...

  • Radio Shack PRO-433 - page 2

    2 Contents quick start 4 step 1: installing your scanner 4 step 2: power your scanner 5 step 3: connect your scanner 6 step 4: setting up your scanner 8 step 5: monitoring and scanning 10 the basics 11 your scanner ’s contr ols 12 your scanner ’s display 13 replacing the fuse 15 beyond the basics 16 channel-storage banks 16 priority channels 16 ...

  • Radio Shack PRO-433 - page 3

    3 Contents type I and hybrid trunk ed systems 30 pr ogramming base and offset frequencies 33 Motor ola disconnect tone detect function 34 special features 35 PC pr ogramming 35 scanner cloning 35 care 37 tr oubleshooting 37 resetting the scanner 38 ser vice and r epair 38 speci fi cations 39 RF emissions information 40 limited one-year warranty 40 ...

  • Radio Shack PRO-433 - page 4

    4 Quick Start quick start step 1: installing your scanner Y ou can mount your scanner as a base station or in your vehicle. If you are unsure how to install your scanner in your vehicle, consult your automobile manufacturer , dealer , or a quali fi ed installer . base station Attach the four protective rubber feet to the mounting bracket when you ...

  • Radio Shack PRO-433 - page 5

    5 Quick Start Y our scanner requires a 2 x 7-1/8 x 5-5/16 inch (50 x 180 x 135 mm) mounting area. Allow an additional 2-3/8 inch (60 mm) space behind the scanner for connectors and wires. 1 . Remove the four rear screws that secure the outer metal case and pull off the case with care. 2 . Insert the DIN sleeve into the opening in your dashboard, li ...

  • Radio Shack PRO-433 - page 6

    6 Quick Start vehicle cigarette lighter or power port T o power your scanner from your vehicle’s 12V power source, use a 12V DC cigarette-lighter adapter (not supplied, available at RadioShack ). If you use a cigarette -lighter adapter , you might hear some electrical interference from your engine while scanning . This is normal. vehicle ignition ...

  • Radio Shack PRO-433 - page 7

    7 Quick Start antenna Expand the antenna according to the frequencies you want to montitor: Frequency ..................................... Antenna Length 25-174 MHz .....................Extend fully (4 segments) 400-512 MHz ................... Extend half (2 segments) 806-1300 MHz ................ Collapse fully (1 segment) The scanner ’s ANT ja ...

  • Radio Shack PRO-433 - page 8

    8 Quick Start step 4: setting up your scanner turning on your scanner T o turn on your scanner , turn the VOLUM E knob clockwise until it clicks. T o set the squelch, turn the SQUELCH knob fully counterclockwise, then rotate it clockwise until the hissing sound stops. storing frequencies in channels Y our scanner comes with 150 preprogrammed freque ...

  • Radio Shack PRO-433 - page 9

    9 Quick Start 4 . Select the target bank. The smallest empty channel number fl ashes over the frequency . 5 . Press or to access the target channel. 6 . Press E/PGM . If there is no empty channel, the scanner automatically selects the fi rst channel of the bank. T o cancel the copy or move, press . /CLR /DELA Y . searching for frequencies Y ou ca ...

  • Radio Shack PRO-433 - page 10

    10 Quick Start step 5: monitoring and scanning monitoring T o monitor a channel, press SCAN/MANUAL while the scanner is pausing on the channel, or stop the scanning by pressing SCAN/ MANUAL , enter the channel number , and press SCAN/MANUAL . scanning T o scan, press SCAN/MANUAL . When the scanner fi nds a transmission, it monitors the transmissio ...

  • Radio Shack PRO-433 - page 11

    11 The Basics the basics A frequency is the tuning location of a station. A channel is a programmable memory location for storing frequencies that you can scan for activity . Channels are grouped into 10 channel- storage banks , each of which contains 100-channels. Service banks are preset channel-storage banks of frequencies used by HAM operators, ...

  • Radio Shack PRO-433 - page 12

    12 The Basics your scanner ’s controls SCAN/MANUAL Starts and stops channel scans, or lets you directly enter a frequency or channel number . SRCH Searches for frequencies, or active talk group IDs. SVC Starts a service bank search. TRUNK Accesses trunk tracking and stores trunked frequencies. WX / Controls weather searches and activates the Skyw ...

  • Radio Shack PRO-433 - page 13

    13 The Basics Number k eys Enter a channel, a frequency , or an ID number . HAM Selects the ham band when in service mode. MRN Selects the marine band when in service mode. AIR Selects the air band when in service mode. POL Selects the police band when in service mode. ALERT Activates the NWR - SAME weather alert. CLR /DELA Y Clears error messages, ...

  • Radio Shack PRO-433 - page 14

    14 The Basics D ATA Appears when the data skip function is active, and in the trunking mode when the dis connect tone detect function is off . Appears when Signal Stalker I is active. SCAN Appears during channel scan. LIST Appears with numbers (1–5) during trunking. A bar indicates which ID scan list banks are turned on for scanning. SRCH Appears ...

  • Radio Shack PRO-433 - page 15

    15 The Basics or Indicates the search direction during a chain, direct, or service search, and normal and weather scan. ALERT Appears when the weather alert is turned on, or fl ashes when the scanner detects an alert coded signal. M, E or L Indicates the trunking system: Motorola (M), EDA CS (E), or L TR (L). CH Indicates the current channel. repl ...

  • Radio Shack PRO-433 - page 16

    16 Beyond the Basics beyond the basics channel-storage banks The scanner displays the channel-storage bank number while scanning a channel. Y ou can turn off a bank by pressing the bank ’s number , but one bank must always be active. T o increase scanning speed, you can lock out channels with continuous transmission, such as weather channels or b ...

  • Radio Shack PRO-433 - page 17

    17 Beyond the Basics chain search Chain search lets you search through preset frequency ranges and store found frequencies. Y ou can also modify each range. At least one bank must be active. If you disable all the banks, the error tone beeps. 1 . Press SRCH . SRCH appears. 2 . (Optional) Press 0 – 9 to enable / disable search banks: Bank No. Freq ...

  • Radio Shack PRO-433 - page 18

    18 Beyond the Basics 3 . Enter the lower limit frequency , and then press E/PGM . 4 . Press or to change to the upper limit frequency . 5 . Enter the upper limit frequency , and then press E/PGM . 6 . When you fi nish programming frequency ranges, press SRCH . ser vice bank search Y ou can search preprogrammed frequencies allocated to HAM, marine, ...

  • Radio Shack PRO-433 - page 19

    19 Beyond the Basics When the scanner receives a SAME- coded signal, ALERT fl ashes one of the following codes to indicate the alert level: L1... ................................................................................................. W arning L2.. ........................................................................................... ...

  • Radio Shack PRO-433 - page 20

    20 Beyond the Basics Sk ywarn Skywarn jumps directly to the last channel in memory from any mode. The scanner pauses any active scans and starts receiving transmissions in the last channel. If no frequency is programmed in the last channel, No Prog appears and the scanner sounds an error tone. During inclement weather , reports made by Skywarn obse ...

  • Radio Shack PRO-433 - page 21

    21 Beyond the Basics Signal Stalk er I Signal Stalker I searches for frequencies in a speci fi ed range. This works well for locating strong local transmissions, such as mobile and handheld two way radios in areas with no other strong transmission sources; however , if you are in an area with many transmission sources (such as pager radio transmit ...

  • Radio Shack PRO-433 - page 22

    22 Beyond the Basics S -S.ALt ................................................................................... Alert settings S -S.Lit ............................................................................. Back light settings S -S.PS ....................................................................... P ager screen settings S -S.OnlY . ...

  • Radio Shack PRO-433 - page 23

    23 Beyond the Basics 5 . Press MENU to exit the menu mode. k eytones The keytones feature beeps when you press a button on the scanner . T o modify keytone settings, complete the following steps: 1 . Press MENU . 2 . Press or to until bEEP appears in the display , then press E/PGM . 3 . Press or to select OFF or ON , then press E/PGM . 4 . Press ME ...

  • Radio Shack PRO-433 - page 24

    24 T runking Operations trunking operations The scanner can track transmissions for up to 10 Motorola T ype I, T ype II, hybrid, EDA CS or L TR analog trunking systems. When the scanner fi nishes checking activity in the trunked system, it scans other conventional frequencies in the bank. F or trunked reception, set the squelch at the center posit ...

  • Radio Shack PRO-433 - page 25

    25 T runking Operations • For ED A CS and L TR systems, you must enter the frequencies in logical channel number (LCN) order . • If you try to enter a duplicate frequency in a bank, the scanner beeps and the channel which was previously stored appears. 6 . Press or to select the next channel in the bank and repeat Step 4 to enter frequencies in ...

  • Radio Shack PRO-433 - page 26

    26 T runking Operations 5 . Enter the talk group IDs for each trunk system. L TR talk groups are identi fi ed as six - digit numbers in the form AHHUUU : A ................................................................................ Area code (0 to 1) H .......................................................... Home repeater (01 through 20) U ...

  • Radio Shack PRO-433 - page 27

    27 T runking Operations 2 . When the selected trunked system is displayed, press E/PGM . 3 . Use or to choose Id Lout, and press E/PGM . 4 . Press L/O , the ID is unlocked and the next locked ID displays. 5 . If you unlocked all locked IDs, the scanner displays Non. T o unlock all talk group IDs, hold L/O untill you hear two beeps. priority talk gr ...

  • Radio Shack PRO-433 - page 28

    28 T runking Operations AF S F ormat Y our scanner can translate decimal talk group lists to the much more powerful AFS format. Become familiar with AFS partial entry , and your scanning will become more fl exible and ef fi cient. The AFS format allows you to enter full or partial EDA CS IDs for powerful fl exibility in all modes. 1 . Select the ...

  • Radio Shack PRO-433 - page 29

    29 T runking Operations Y ou can enter partial group numbers for EDACS talk groups. By entering only the desired portion of a group, you can select either 128, 8, or 1 talk group. F or example, you might program every talk group in a police department by pressing just four keys. Y ou cannot use partial talk groups in decimal mode. T o enter a parti ...

  • Radio Shack PRO-433 - page 30

    30 T runking Operations trunk search and scan Y ou can trunk scan and scan conventional frequencies at the same time. Y ou can program conventional frequencies in the same bank as trunking systems, but not while in trunk mode. T o scan both trunking and conventional banks, turn off trunking, select the banks to scan, then turn on trunking again. T ...

  • Radio Shack PRO-433 - page 31

    31 T runking Operations Sub fl eet information is included with the frequency list for a T ype I system. There are 16 preset fl eet maps to choose from, and it is best to start with these when setting up a T ype I or hybrid trunk scanning bank. preset fl eet maps 1 . Set the scanner for conventional scanning and press E/PGM , then press TRUNK to ...

  • Radio Shack PRO-433 - page 32

    32 T runking Operations E1P10 Block Code 0 1 234567 Size S0 S0 S0 S0 S0 S0 S4 S4 E1P11 Block Code 0 1 234567 Size S4 S0 S0 S0 S0 S0 S0 S0 E1P12 Block Code 0 1 234567 Size S0 S0 S0 S0 S0 S0 S0 S4 E1P13 Block Code 0 1 234567 Size S3 S3 S11 S4 S4 S0 S0 S0 E1P14 Block Code 0 1 234567 Size S4 S3 S10 S4 S4 S4 S12 (S12) E1P15 Block Code 0 1 234567 Size S4 ...

  • Radio Shack PRO-433 - page 33

    33 T runking Operations codes S -12, S-13, or S -14, these restrictions apply: • S -12 can only be assigned to Blocks 0, 2, 4, or 6 • S -13 can only be assigned to Blocks 0 and 4 • S -14 can only be assigned to Block 0 Because these size codes require multiple blocks, the scanner prompts you for the next available block when you program a fl ...

  • Radio Shack PRO-433 - page 34

    34 T runking Operations 8 . Enter the frequency using the number keys according to the following guide, then press E/PGM . • F or Motorola T ype II VHF (E2- VHF Hi band) use 5kHz steps between 5 kHz – 100 kHz. • F or Motorola T ype II UHF (E2-UHF band) use 12.5kHz steps between 12.5 kHz – 100 kHz. 9 . Press . The display changes to the offs ...

  • Radio Shack PRO-433 - page 35

    35 Special Features special features PC programming Y ou can transfer programming data to your scanner using your PC and an optional interface cable and software (available at your local RadioShack or www .radioshack.com). 1 . T urn off your scanner . 2 . Connect the interface cable to your computer and then connect the other end of the cable to th ...

  • Radio Shack PRO-433 - page 36

    36 Special Features 2 . Connect the interface cable into each scanner ’s PC/IF port. 3 . While you press and hold E/PGM on both scanners, turn on both scanners. 4 . Determine the scanner which has the frequency data that you want to transfer . This one must be set up as the First Unit, and the other must be set as the Clone Unit 5 . Press E/PGM o ...

  • Radio Shack PRO-433 - page 37

    37 Care care Y ou can extend the life of your scanner by following these basic care guidelines: • K eep the scanner dry; if it gets wet, wipe it dry immediately . • Use and store the scanner only in normal temperature environments. • Handle the scanner carefully; do not drop it. • K eep the scanner away from dust and dirt, and wipe it with ...

  • Radio Shack PRO-433 - page 38

    38 Care Why am I missing replies to conversations? Why isn’t my scanner scanning trunk ed frequencies? Y ou may have selected an incorrect fl eet map. T ry another fl eet map or program your own. Y ou may be monitoring a T ype I system, but your scanner is set to scan T ype II systems. Set you scanner to T ype 1 trunked frequencies. resetting t ...

  • Radio Shack PRO-433 - page 39

    39 Speci fi cations speci fi cations Frequency Coverage: ...................................... 29–54 MHz (in 5 kHz steps) .................................................. 108–136.9875 MHz (in 12.5 kHz steps) ................................................................ 137–174 MHz (in 5 kHz steps) ..................................... ...

  • Radio Shack PRO-433 - page 40

    ©2006. RadioShack Corporation. All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to P art 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfere ...

Fabricant Radio Shack Catégorie Scanner

Les documents que nous recevons du fabricant de l'appareilRadio Shack PRO-433 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Radio Shack
- manuels d’utilisations PRO-433
- fiches produit Radio Shack
- dépliants
- ou étiquettes-énergie Radio Shack PRO-433
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Radio Shack PRO-433.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Radio Shack PRO-433, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Radio Shack PRO-433. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Radio Shack PRO-433.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Radio Shack PRO-433, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Radio Shack PRO-433 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Radio Shack PRO-433.

Le manuel d’utilisation complet Radio Shack, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Radio Shack PRO-433 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Radio Shack PRO-433, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lRadio Shack PRO-433 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Radio Shack PRO-433 - qui devraient nous aider dans les premières étapes lors de l'utilisation Radio Shack PRO-433
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Radio Shack PRO-433
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Radio Shack PRO-433 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Radio Shack PRO-433?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Radio Shack PRO-433, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Radio Shack PRO-433 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)