-
Image IMSB61610, IMSG61610 - page 1
® USER’S MANUAL QUESTIONS? If you have questions, or if there are missing parts, we will guar- antee complete satisfaction through direct assistance from our factory . TO A VOID DELA YS, PLEASE CALL DIRECT TO OUR T OLL- FREE CUSTOMER HOT LINE. The trained technicians on our customer hot line will provide immediate assistance. CUSTOMER HOT LINE: ...
-
Image IMSB61610, IMSG61610 - page 2
2 IMAGE ® is a registered trademark of ICON Health & Fitness, Inc. Posting the W arning Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Image IMSB61610, IMSG61610 - page 3
3 W ARNING: T o reduce the risk of drowning, electric shock, or serious injury , read the fol- lowing important precautions before using the hydrotherapy spa. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the hydrotherapy spa are adequately informed of all precautions. 2. Use the hydrotherapy ...
-
Image IMSB61610, IMSG61610 - page 4
4 20. DANGER—Risk of electric shock. Keep all electrical appliances such as radios, tele- phones, televisions, and lights at least five feet away from the water . 21. A wire connector is provided on the electron- ics pack of the hydrotherapy spa to connect a minimum No. 6 A WG (13.03 mm 2 ) solid copper conductor between the spa and any metal equ ...
-
Image IMSB61610, IMSG61610 - page 5
5 35. W ARNING: The spa jets produce a stream of water with relatively high pressure. Prolonged exposure of a localized area of the body may cause bruises to the skin. 36. The included warning sign must be posted where all users of the hydrotherapy spa can see and read it. (See POSTING THE W ARNING SIGN on page 2.) 37. W ARNING DECAL PLACEMENT : Lo ...
-
Image IMSB61610, IMSG61610 - page 6
6 Congratulations for selecting the new IMAGE ® RENEW 616 hydrotherapy spa. The innovative RENEW 616 spa allows you to enjoy all the benefits of hydrotherapy in the comfort and privacy of your home. Hydrotherapy is a proven method for soothing tired muscles after exercise or for relieving the stress of a busy life. The warm environment stimulates ...
-
Image IMSB61610, IMSG61610 - page 7
7 There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to consider as you decide where to set up the spa. If you set up the hydrotherapy spa inside: 1. The spa will increase the level ...
-
Image IMSB61610, IMSG61610 - page 8
8 Before beginning assembly , carefully read the following information and instructions: • Place all parts in a cleared area and remove the packing materials from the spa shell. Do not dis- pose of the packing materials until assembly is completed and the spa is operating. • During assembly , make sure that all parts are oriented as shown in th ...
-
Image IMSB61610, IMSG61610 - page 9
9 5. Remove the two warning decals (not shown) from the spa shell. Using a damp cloth, wipe the spa shell clean. Before filling the spa, make sure that it is in the desired position and that there is room to service the spa. Once the spa is filled, it will have to be drained before it can be moved. Insert a garden hose into the filter housing, and ...
-
Image IMSB61610, IMSG61610 - page 10
10 The hydrotherapy spa is designed to seat six adults. The spa holds 300 gallons of water and offers a heat- ing system (80°F to 104°F), a filtration system, and adjustable hydrotherapy jets. Follow the guidelines below to use and maintain the spa for your long-term enjoyment. WIRING THE HYDROTHERAPY SP A The hydrotherapy spa is designed to oper ...
-
Image IMSB61610, IMSG61610 - page 11
Refer to the diagram above. The function of each component is explained below . A. The four adjustable, directional jets can be pivot- ed to direct their water flow . T o open the jets, turn the rims counterclockwise; to close the jets, turn the rims clockwise. If no air flows through the jets, turn the jets counterclockwise. Close the jets to incr ...
-
Image IMSB61610, IMSG61610 - page 12
12 Using the Controls Refer to the diagram above. The function of each control is explained below: T emperature Buttons: Control the temperature setting of the water . The temperature can be set between 80°F and 104°F . The water heats at about 6°F per hour with the cover on. Use a medical or other accu- rate thermometer to check the temperature ...
-
Image IMSB61610, IMSG61610 - page 13
13 The hydrotherapy spa is designed to provide years of enjoyment. Please follow the guidelines below to properly maintain your spa. MAINTENANCE SCHEDULE Daily • Check the water level and refill the spa to the level shown in step 5 on page 9. • Check the pH balance and sanitizer level. Adjust if necessary (see W A TER CHEMISTRY on page 14). Wee ...
-
Image IMSB61610, IMSG61610 - page 14
14 W A TER CHEMISTRY CAUTION: The chemicals used to maintain the pH balance of the water and to sanitize the water can be dangerous. Always follow these basic guide- lines when handling the chemicals: 1. Always read and follow the directions on the label, unless directed otherwise. 2. Never mix different chemicals. 3. Do not exceed the recommended ...
-
Image IMSB61610, IMSG61610 - page 15
15 T o drain the hydrotherapy spa, follow the steps below: 1. Using the console, adjust the temperature to the lowest setting. 2. Shut off the power at the circuit breaker or GFCI. 3. Remove the long access panel from the spa. 4. Remove the end of the drain hose from the spa. Remove the cap and attach a garden hose to the drain hose. 5. Open the va ...
-
Image IMSB61610, IMSG61610 - page 16
16 1. SYMPTOM: THE SP A WILL NOT OPERA TE a. Check to see if the GFCI breaker is tripped or was not turned on. Reset the GFCI breaker . 2. SYMPTOM: THE CIRCUIT BREAKER OR THE GFCI TRIPS WHILE THE SP A IS OPERA TING a. Reset the circuit breaker or the GFCI. If the cir- cuit breaker or the GFCI trips again, contact a qualified electrician for service ...
-
Image IMSB61610, IMSG61610 - page 17
17 b. A clamp or seal inside the pump compartment may be loose. Check inside the pump compart- ment for excess water and watch the pump unit while it is operating to see if water drips from any of the plumbing. If you can identify the location of the leak inside the spa jet unit, tight- en the clamp or replace the damaged seal. 10. SYMPT OM: THE SP ...
-
Image IMSB61610, IMSG61610 - page 18
18 Part List—Model No. IMSB61600/IMSG61600 R1201A 1 1 Thermometer Fitting 2 4 Access Panel 3 3 Face Ring 4 4 Small Rotator 5 1 Large Rotary Jet 6 4 Pivot Ring 7 32 #10 x 2” Sheet Metal Screw 8 1 Filter Cover 9 8 #10 x 1.5 Sheet Metal Screw 10 3 Medium Jet Housing 1 1 1 Spa Cover 12 3 Small Nozzle 13 2 Jet Pump/Motor O-ring 14 1 Electronics Pack ...
-
Image IMSB61610, IMSG61610 - page 19
19 9 34 26 26 30 31 21 27 28 13 20 11 2 7 25 26 10 18 17 13 9 38 38 38 38 29 29 29 4 6 19 23 36 39 35 32 37 12 3 19 22 18 19 24 51 5 1 8 16 33 14* 9 9 52 52 19 53 54 Exploded Drawing— Model No. IMSB61600/IMSG61600 R1201A ...
-
Image IMSB61610, IMSG61610 - page 20
Part No. 180967 R1201A Printed in USA © 2001 ICON Health & Fitness, Inc. T o order replacement parts, simply call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays). T o help us assist you, please be pre- pared to give the following information when calli ...
Avez-vous une question à propos de Image IMSB61610, IMSG61610?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Image IMSB61610, IMSG61610, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Image IMSB61610, IMSG61610 il est probable qu’il a envie de partager la façon de le résoudre.