Français dropdown-ico

Manuel d’utilisation Heatiator NNXT4236I

82 pages 4.05 mb
Télécharger

Aller à la page of 82

Summary
  • Heatiator NNXT4236I - page 1

    1 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Model(s): NNXT4236I, NNXT4236IL NNXT3933I, NNXT3933IL Owner ’ s Manual Installation and Operation Installation and service of this appliance should be performed by qualified personnel. Hearth & Home T echnologies suggests NFI certi fi ed or factory-trained professionals, or techni ...

  • Heatiator NNXT4236I - page 2

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 2 Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on fi replace: _____________________ Dealership purchased from: ____________________ ...

  • Heatiator NNXT4236I - page 3

    3 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION! Indicates a hazardous situation which, i ...

  • Heatiator NNXT4236I - page 4

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 4  = Contains updated information. 14 Finishing A. Mantel and W all Projections 58 B. Facing Material 59 15 Appliance Setup A. Remove the Packaging 60 B. Remove Screen Package Assembly 60 C. Remove the Shipping Materials 60 D. Removing Fixed Glass Assembly 60 E. Remove T op Log Pack 60 ...

  • Heatiator NNXT4236I - page 5

    5 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 B. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric heart ...

  • Heatiator NNXT4236I - page 6

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 6 B. Limited Lifetime W arranty (continued) 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS:  7KLVZDUUDQWRQOFRYHUV++7DSSOLDQFHVWKDWDUHSXUFKDVHGW KURXJKDQ++7 DXWKRUL]HGGHDOHURUGLVWULEXWRU  $ OLVWRI ++7DXWKRUL]HGGH ...

  • Heatiator NNXT4236I - page 7

    7 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 C. BTU Speci fi cations MODELS: NNXT4236I, NNXT4236IL, NNXT3933I, NNXT3933IL LABORA TOR Y : Underwriters Laboratories, Inc. (UL) TYPE: V ented Gas Fireplace Heaters STANDARD: ANSI Z21.88-2002•CSA2.33-M2002•UL307B This product is listed to ANSI standards for “V ented Gas Fireplace ...

  • Heatiator NNXT4236I - page 8

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 8 H. Requirements for the Commonwealth of Massachusetts For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operated by the Commonwealth and where the side ...

  • Heatiator NNXT4236I - page 9

    9 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Decorative Doors (not shown) Section 2 Fixed Glass Assembly Section 15 Mantel Hearth (not required) Clear Space Section 2 Fan Kits Section 2 Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate fi replace before reading and understanding operating instructions. ...

  • Heatiator NNXT4236I - page 10

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 10 CLEAR SP ACE 3 FT . IN FRONT OF FIREPLACE D. Clear Space W ARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may da ...

  • Heatiator NNXT4236I - page 11

    11 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 J. Before Lighting Fireplace Before operating this fi replace for the fi rst time, have a quali fi ed service technician : • V erify all shipping materials have been removed from inside and/or underneath the fi rebox. • Review proper placement of logs, rockwool and/or other deco ...

  • Heatiator NNXT4236I - page 12

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 12 K. Lighting Instructions (IPI) • For normal use, activate/deactivate your fi replace with the wall switch or remote control. • The IPI system may be operated with four AA-cell batteries. When using batteries, unplug the power supply . T o prolong battery life, remove them when usin ...

  • Heatiator NNXT4236I - page 13

    13 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the fi replace of f and allow it to completely cool. • Remove fi xed glass assembly . See Section 15.D. • Clean fi xed glass assembly . See Section 3. • Replace the ? ...

  • Heatiator NNXT4236I - page 14

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 14 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with care. Glass is breakable. • Avoid striking, scratching or slamming glass • Avoid abrasive cleaners ...

  • Heatiator NNXT4236I - page 15

    15 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Control Compartment and Firebox T op Frequency: Annually By: Quali fi ed Service T echnician T ools needed : Protective gloves, vacuum cleaner , dust cloths • V acuum and wipe out dust, cobwebs, debris or pet hair . Use caution when cleaning these areas. Screw tips that have penetrat ...

  • Heatiator NNXT4236I - page 16

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 16 NOTE: An installation will have either a vertical termination or a horizontal termination. It will not have both (as shown). Noncombustible Roof Flashing maintains minimum clearance around pipe (Section 10) Ceiling Firestop on floor of attic (Section 8) V ent Pipe (Section 8) Horizontal ...

  • Heatiator NNXT4236I - page 17

    17 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 B. Design and Installation Considerations Heatilator direct vent gas appliances are designed to op- erate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is required. Installation MUST comply w ...

  • Heatiator NNXT4236I - page 18

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 18 5 5 F raming and Clearances A. Select Appliance Location When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.1). W ARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access. Due ...

  • Heatiator NNXT4236I - page 19

    19 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 B. Construct the Appliance Chase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should enclosed inside the chase. NOTICE: T reatment of ceiling fi restops and wall shield fi restops and construction of th ...

  • Heatiator NNXT4236I - page 20

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 20 D Clearance to Ceiling 30 in. (762 mm) 0 in. 0 in. T O LEVEL OF ST ANDOFFS Combustible Object 36 in. (914 mm) 0 in. Combustible flooring may be installed next to the front of the appliance. Drywall 1/2 in. (13 mm) 1/2 in. (13 mm) C A B Model in. mm in. mm i n. mm i n. mm i n. mm NNXT393 ...

  • Heatiator NNXT4236I - page 21

    21 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Measured from top of hood (in inches) 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 5 5-1/2 6-1/4 7 7-3/4 8-1/2 9-1/4 10 10-3/4 1 1-1/2 12-1/4 13 13-3/4 14-1/2 15-1/4 16 30 in. minimum to ceiling D. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to ...

  • Heatiator NNXT4236I - page 22

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 22 Gas, Wood or Fuel Oil T ermination Cap B Gas T ermination Cap ** A * * If using dec orat ive cap cover(s), this distance m ay need t o be increased. Refer t o the installation inst ruc tions supplied with the decorative cap c over. ** AB 6 in. (minim um) up to 20 in. 152 mm/508 mm 18 in ...

  • Heatiator NNXT4236I - page 23

    23 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Dimension Descriptions A Clearance above the ground, a veranda, porch, deck or balcony - 12 in. (30 cm) minimum. * B Clearance to window or door that may be opened – 10,000 BTUs or less, 6 in. (15 cm) minimum; 10,000-50,000 BTUs, 9 in. (23 cm) minimum; over 50,000 BTUs, 12 in. (30 cm) ...

  • Heatiator NNXT4236I - page 24

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 24 Horizontal V ertical 8-1/2 in. 8-1/2 in. 12 in. On 45° runs, 1 ft (.3 m) of diagonal is equal to 8-1/2 in. (216 mm) horizontal run and 8-1/2 in. (216 mm) vertical run. A. Approved Pipe This appliance is approved for use with Hearth & Home T echnologies DVP and/or SLP venting system ...

  • Heatiator NNXT4236I - page 25

    25 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 H 1 V 1 T o replace the fi rst starter elbow with two 45° elbows, refer to Figure 7.4. All other 90° elbows can be replaced with two 45° elbows. General Rules: • SUBTRACT 3 ft. from the total H measurement for each 90° elbow installed horizontally . • SUBTRACT 1-1/2 ft. from th ...

  • Heatiator NNXT4236I - page 26

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 26 4 ft min. (1.22 m) 17 ft max. (5.18 m) H 1 V 1 H 2 H 3 Installed Horizontally Installed V ertically H 2 Figure 7.5 T wo Elbows 1. T op V ent - Horizontal T ermination - (continued) Figure 7.4 T wo 45° Elbows replacing One 90° Elbow V 1 min. V 1 max. H 1 +H 2 max. H 1 +H 2 +H 3 max. ft ...

  • Heatiator NNXT4236I - page 27

    27 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Figure 7.6 1. T op V ent - Horizontal T ermination - (continued) Three Elbows H 1 V 1 V 2 H 2 Installed V ertically V 1 min. V 1 + V 2 max. H 1 +H 2 max. ft m ft m ft m DVP 1 0.30 24 7.32 17 5.18 SLP 1 0.30 22 6.71 17 5.18 2. T op V ent - V ertical T ermination No Elbow Figure 7.7 12 ft ...

  • Heatiator NNXT4236I - page 28

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 28 Lift top refractory and hold in place Pull side refractory forward & out Figure 7.7b Remove Side Refractory • Remove the side refractory: - Gently raise the front of the top refractory . - Lift the side piece up slightly and then out. • Remove top refractory: - Lower towards sid ...

  • Heatiator NNXT4236I - page 29

    29 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Figure 7.8 2. T op V ent - V ertical T ermination - (continued) Three Elbows 12 ft (3.66 m) min. 60 ft (18.29 m) max. Maximum horizontal run is 100% of vertical, but cannot exceed 17 ft (5.18 m) ...

  • Heatiator NNXT4236I - page 30

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 30 Figure 7.9 T wo Elbows 12 ft (3.66 m) min. 60 ft (18.29 m) max. Maximum horizontal run is 100% of vertical, but cannot exceed 17 ft (5.18 m) 2. T op V ent - V ertical T ermination - (continued) ...

  • Heatiator NNXT4236I - page 31

    31 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 3. Rear V ent - Horizontal T ermination Figure 7.10 Figure 7.1 1 No Elbow One 45° Elbow 18 in. (457 mm) max. 18 in. (457 mm) max. ...

  • Heatiator NNXT4236I - page 32

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 32 3. Rear V ent - Horizontal T ermination - (continued) T wo Elbows Figure 7.12 Figure 7.13 Three Elbows H 2 V 1 H 1 H 2 V 1 H 3 H 1 Installed Horizontally H 1 max. V 1 min. H 1 +H 2 +H 3 max. ft m ft m ft m 0 0 1 0.30 3 0.91 2 0.61 1 0.30 3 0.91 4 1.22 2 0.61 6 1.83 6 1.83 3 0.91 9 2.74 ...

  • Heatiator NNXT4236I - page 33

    33 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 4. Rear V ent - V ertical T ermination One Elbow Figure 7.14 T wo Elbows Figure 7.15 12 ft (3.66 m) min. 60 ft (18.29 m) max. 0 min. 6 ft (1.83 m) max. 12 ft (3.66 m) min. 60 ft (18.29 m) max. 0 min. 6 ft (1.83 m) max. Maximum horizontal run is 100% of vertical, but cannot exceed 18 ft ...

  • Heatiator NNXT4236I - page 34

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 34 4. Rear V ent - V ertical T ermination - (continued) Three Elbows Figure 7.16 12 ft (3.66 m) min. 60 ft (18.29 m) max. 0 min. 6 ft (1.83 m) max. Maximum horizontal run is 100% of vertical, but can- not exceed 18 ft (5.49 m) ...

  • Heatiator NNXT4236I - page 35

    35 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 * When using SLP pipe, minimum clearances from the vent pipe to combustible materi- als at inside wall firestops are: T op: 2-1/2 in. (64 mm) Bottom: 1/2 in. (13 mm) Sides: 1 in. (25 mm) Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). • DVP heat shield - designed to ...

  • Heatiator NNXT4236I - page 36

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 36 3 fasteners per side Ceiling firestop installed below ceiling. Ceiling firestop installed above ceiling. Install attic insula- tion shields before or after installation of vent system. A TTIC ABOVE A PIPE DVP SLP A 10 in. (254 mm) 9 in. (229 mm) A C. Install the Ceiling Firestop A ceili ...

  • Heatiator NNXT4236I - page 37

    37 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Bend all tabs inward 90° to maintain clearance and prevent insulation from falling inside Insert 3 screws Bend 4 tabs inward 90° to maintain clearance D. Install Attic Insulation Shield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T ...

  • Heatiator NNXT4236I - page 38

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 38 CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during installa- tion. Sheet metal edges are sharp. NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. A. T op V ent 9 9 Appliance Preparation Figure ...

  • Heatiator NNXT4236I - page 39

    39 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 B. Rear V ent NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. Figure 9.6 Figure 9.8 Figure 9.7 Figure 9.10 Figure 9.9 • Fold the tabs toward the center of the vent cap (90º) and remove the insulation gasket. • Cut the metal retaining ...

  • Heatiator NNXT4236I - page 40

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 40 Nailing Flanges (both sides) C. Secure and Level the Appliance W ARNING! Risk of Fire! Prevent contact with: • Sagging or loose insulation • Insulation backing or plastic • Framing and other combustible materials Block openings into the chase to prevent entry of blown-in insulatio ...

  • Heatiator NNXT4236I - page 41

    41 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Lances 1 0 10 Install V ent P ipe A. Assemble V ent Sections (DVP Only) Attach Pipe to the Firebox Assembly Note: The end of the pipe sec tions with the lanc ed tabs will face towards the applianc e. Attach the fi rst pipe section to the starting collar: • Lanced pipe end to the star ...

  • Heatiator NNXT4236I - page 42

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 42 B. Assemble V ent Sections (SLP Only) T o attach the fi rst vent component to the starting collars of the appliance • Attach a DVP-SLP24 adapter to the starting collar of the appliance. • Lock the vent components into place by sliding the pipe section onto the collar . • Align th ...

  • Heatiator NNXT4236I - page 43

    43 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Figure 10.8 Securing V ertical Pipe Sections Figure 10.9 Securing Horizontal Pipe Sections E. Disassemble V ent Sections • Rotate either section (see Figure 10.10) so the seams on both pipe sections are aligned as shown in Figure 10.1 1. • Pull carefully to separate the pieces of pi ...

  • Heatiator NNXT4236I - page 44

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 44 Cut hole 1/8 in. (3 mm) greater in size than pattern of support box as it is projected onto roofline. 2 in. (51 mm) minimum below finished ceiling Cathedral ceiling support box Level F . Install Decorative Ceiling Components (SLP only) A decorative ceiling thimble can be installed on a ...

  • Heatiator NNXT4236I - page 45

    45 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 G. Install Metal Roof Flashing • See minimum vent heights for various pitched roofs (Figure 10.14) to determine the length of pipe to extend through the roof. • Slide the roof fl ashing over the pipe sections extending through the roof as shown in Figure 10.15. Horizontal overhang ...

  • Heatiator NNXT4236I - page 46

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 46 J. Install Decorative W all Components (SLP only) A decorative wall thimble can be installed on an interior wall through which the vent passes. The decorative wall thimble is used to cover the wall shield fi restop. • Slide the decorative wall thimble over the last section of horizon ...

  • Heatiator NNXT4236I - page 47

    47 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 INTERIOR Heat Shield or Extended Heat Shield W all Shield Firestop Heat Shield 1-1/2 in. (38 mm) min. overlap SHEA THING V ent depth from back of appliance to outside surface of exterior wall (see chart below) Slip Section can be extended Inner V ent Outer V ent EXTERIOR Figure 10.20 V ...

  • Heatiator NNXT4236I - page 48

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 48 1 1 11 Shrouds • Chase top shrouds may be fi eld constructed where permitted by regional building codes. W ARNING! Risk of Fire! Shrouds must be constructed as speci fi ed. Improper construction may overheat chase top. NOTICE: Some regional codes require an agency-Listed shroud. Con ...

  • Heatiator NNXT4236I - page 49

    49 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Min. Base Dim Min. Height Min. Base Dim Figure 1 1.2 Mailbox Style Shroud Dimensions Minimum Opening Height Minimum Base Dimension Min. Opening Width Min. Base Dimension Minimum Height Figure 1 1.2 Roofed Style Shroud Dimensions Roofed Style Shroud (may be used with DVP-TV , DVP-TVHW , ...

  • Heatiator NNXT4236I - page 50

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 50 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a qualified service technician using Hearth & Home T echnologies speci fi ed and approved parts. B. Gas Pressure • Optimum appliance performance requires proper ...

  • Heatiator NNXT4236I - page 51

    51 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 A. Wiring Requirements NOTICE: This appliance must be electrically wired and grounded in accordance with local codes or , in the absence of local codes, with National Electric Code ANSI/NFP A 70-latest edition or the Canadian Electric Code CSA C22.1. • Wire the appliance junction box ...

  • Heatiator NNXT4236I - page 52

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 52 D. Electrical Service and Repair W ARNING! Risk of Shock! Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. V erify proper operation after servicing. TO JUNCTION BOX (120V) CONTROL MODULE I S FLAME SENSE WHITE WHITE ...

  • Heatiator NNXT4236I - page 53

    53 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 F . W all Switch Installation for Fan (Optional) If the box is being wired to a wall mounted switch for use with a fan, see Figure 13.3: • The power supply for the appliance must be brought into a switch box. • The power can then be supplied from the switch box to the appliance usin ...

  • Heatiator NNXT4236I - page 54

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 54 Installation & Operating Instructions RC200 IntelliFire Plus™ Multifunction Remote Control Hearth & Home T echnologies disclaims any responsibility for , and the warranty will be voided by , the following actions: • Installation and use of any damaged system component. • M ...

  • Heatiator NNXT4236I - page 55

    55 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Figure 3. Mounting Remote Control Housing 5. Close the housing door and press the power button. The red light illuminates if the battery was properly in- stalled. See Figure 3. Fan Installation • Insert the 3 prong plug from the fan into the receptacle located in the AUX200 module. Se ...

  • Heatiator NNXT4236I - page 56

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 56 Figure 6. Programming RC200 REMOTE POSITION REMOTE POSITION Figure 5. Plug Fan into AUX200 Module Programming the RC200 to the Control Module CAUTION! Risk of burns! DO NOT program the remote control to the control module when fi replace is hot. • V erify the ON/OFF/REMOTE switch is ...

  • Heatiator NNXT4236I - page 57

    57 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Frequently Asked Questions/T roubleshooting Please contact your Hearth & Home T echnologies dealer with any questions or concerns. For the location of your nearest Hearth & Home T echnologies dealer , please visit www . fi reside.com. Symptom Possible Cause Corrective Action Re ...

  • Heatiator NNXT4236I - page 58

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 58 1 in. (25 mm) min. to perpendicular wall A 3-1/2 in. (89 mm) min. from fireplace opening to perpendicular wall B Mantel Leg or Perpendicular W all T op of Appliance Drywall A B Measured from top of hood (in inches) 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 5 5-1/2 6-1/4 7 7-3/4 8-1/2 9-1 ...

  • Heatiator NNXT4236I - page 59

    59 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 0 in. 0 in. High T emperature Sealant (300° F/149° C min.) T op and Side Seal Joint 0 in. Finish wall material may be combustible on sides and up to non-combustible strip on top. Non-combustible strip shipped with appliance. DO NOT REMOVE! May be covered with non-combustible materials ...

  • Heatiator NNXT4236I - page 60

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 60 1 5 15 Applianc e Setup A. Remove the Packaging Remove the shrink fi lm, corrugated top cap, bottom cap and column protectors from the appliance. The appliance should look as shown in Figure 15.1. B. Remove Screen Package Assembly • Grasp the top of the screen package and lift up to ...

  • Heatiator NNXT4236I - page 61

    61 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 G. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the fi rebox or underneath in the control cavity . H. Accessories Install approved accessories per instructions included with the accessories. Refer to Section 17. W ARNING! Rick of Fire and Electric Shock ...

  • Heatiator NNXT4236I - page 62

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 62 Figure 15.10 Instell Right Middle Log • Install the Right middle log by aligning the slot and hole in the bottom of the log with the two pins on the right end of the left bottom log. Figure 15.1 1 Install T op Right Y Log • Install the top right Y log by aligning the slot on the bot ...

  • Heatiator NNXT4236I - page 63

    63 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Q. Install Hood • Locate the four screws just inside the upper section of the appliance. • Slide the hood into position uncer the screw heads. • Tighten the four screws. See Figure 15.16. P . Unpackage the Hood & Floor Cover Remove parts package from appliance as shown in Fig- ...

  • Heatiator NNXT4236I - page 64

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 64 S. Install Floor Cover Install the fl oor cover as shown in Figure 15.20. Figure 15.20 Installing Floor Cover Note: The fl oor cover in the bot tom front of the fi replac e may be cov ering the U L labels. It is loose and can be remov ed/replaced. • Bend four legs at 90° angle as ...

  • Heatiator NNXT4236I - page 65

    65 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 T . Close the Screen Assembly • Make sure the screen magnetic touch latches are in the open position. See Figure 15.21. • Hange the screen on the shoulder screws in the columns. See Figure 15.22. Open Figure 15.21 Magnetic T ouch Latch Open Hang Screen on Shoulder Screws Figure 15.2 ...

  • Heatiator NNXT4236I - page 66

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 66 1 6 16 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a quali fi ed service technician in the diagnosis of a problem and the corr ...

  • Heatiator NNXT4236I - page 67

    67 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 Intelli fi re Plus Intermittent Pilot Ignition System - (continued) 4. Pilot lights but con- tinues to spark, and main burner will not ignite. (If the pilot continues to spark after the pilot fl ame has been lit, fl ame recti fi cation has not occurred.) A. A shorted or loose connec ...

  • Heatiator NNXT4236I - page 68

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 68 1 7 17 Reference Materials Electrical Access Alternative Gas Access 1-3/4 in. (44 mm) 34-1/2 in. (876 mm) 1-1/2 in. (38 mm) 15-3/4 in. (400 mm) 8 in. (203 mm) 2-3/8 in. (60 mm) 31-1/2 in. (800 mm) 34 in. (864 mm) A B 23-1/2 in. (597 mm) 6-1/2 in. (165 mm) C 19-1/8 in. (486 mm) 1 1-5/8in ...

  • Heatiator NNXT4236I - page 69

    69 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 B. V ent Components Diagrams Figure 17.2 DVP V ent Components Effective Height/Length DVP Pipe (see chart) Pipe inches mm DVP4 4 102 DVP6 6 152 DVP12 12 305 DVP24 24 610 DVP36 36 914 DVP48 48 12 19 DVP6A 3 - 6 76 - 152 DVP12A 3 - 12 76 - 305 Effective Height/Length 10-1/2 in. (267 mm) 1 ...

  • Heatiator NNXT4236I - page 70

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 70 B. V ent Components Diagrams ( continued ) Figure 17.3 DVP V ent Components 13-1/4 in. (367 mm) 24-5/8 in. (625 mm) 27-1/2 in. (698 mm) RF6M Roof Flashing Multi-pak 31 in. (787 mm) 24-5/8 in. (625 mm) 13-1/4 in. (367 mm) RF12M Roof Flashing Multi-pak BEK T rap Cap Brick Extension 13-3/4 ...

  • Heatiator NNXT4236I - page 71

    71 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 B. V ent Components Diagrams ( continued ) Figure 17.4 DVP V ent Components DVP-TB1 Basement V ent Cap 12 in. (305 mm) 1-1/2 in. (38 mm) 7-3/8 in. (187 mm) 14 in. (356 mm) 17-3/4 in. (451 mm) 10-1/2 in. (267 mm) 3-7/8 in. (98 mm) DVP-TV V ertical T ermination Cap 1 in. (25 mm) 14 in. (3 ...

  • Heatiator NNXT4236I - page 72

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 72 B. V ent Components Diagrams ( continued ) Figure 17.5 DVP V ent Components DVP-TRAP1 DVP-TRAP2 DVP-HPC1 DVP-HPC2 DVP-TRAPK1 DVP-TRAPK2 DVP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) 12 in. (305 mm) 8 in. (203 mm) Max Effective Length Note: Heat shields MUST overlap by a minim ...

  • Heatiator NNXT4236I - page 73

    73 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 B. V ent Components Diagrams (continued) Figure 17.6 DVP V ent Components 13 in. (330 mm) 15 in. (381 mm) 8-1/8 in. (206 mm) DVP-HRC-SS 10-7/8 in. 276 mm 10-1/2 in. 267 mm 3° 87° Effective Length 5-3/4 to 8-3/8 in. 146 to 213 mm 5-1/2 in. 140 mm 8-3/8 in. 213 mm DVP-HRC-ZC-SS Fillers ...

  • Heatiator NNXT4236I - page 74

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 74 B. V ent Components Diagrams (continued) Figure 17.7 SLP Series V ent Components Effective Height/Length Pipe inches mm SLP4 4 102 SLP6 6 152 SLP12 12 305 SLP24 24 610 SLP36 36 914 SLP48 48 1219 SLP6A 2 - 6 51 - 152 SLP12A 2 - 12 51 - 305 8-3/4 in. 222 mm 6-1/2 in. 165 mm 6-5/8 in. 168 ...

  • Heatiator NNXT4236I - page 75

    75 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 SLP-WT -BK W all Thimble-Black SL-2DVP Adapter 26 in. 660 mm DVP-HSM-B Extended Heat Shield SLP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (10 ...

  • Heatiator NNXT4236I - page 76

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 76 1 in. (25 mm) 14 in. (356 mm) 3/8 in. (10 mm) 1 in. (25 mm) 7-1/4 in. (184 mm) 7-3/4 to 10-3/8 in. (197 to 264 mm) 13 in. 330 mm 13 in. 330 mm 1-5/16 in. 34 mm 10-9/16 in. 269 mm 14 in. 356 mm 12-1/2 in. 318 mm 8-1/16 in. 205 mm 12 in. 305 mm SLP-CCS-BK Cathedral Ceiling Support Box-Bla ...

  • Heatiator NNXT4236I - page 77

    77 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 C. Service Parts Novus DV Heater IPI Appliance Beginning Manufacturing Date: Aug 2009 Ending Manufacturing Date: ______ NNXT3933I, NNXT4236I Part number list on following page. 8 8 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 07 26 4 7 5 6 1 2 3 Log Set Assembly ...

  • Heatiator NNXT4236I - page 78

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 78 NNXT3933I, NNXT3933IL C. Service Parts (continued) IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked ...

  • Heatiator NNXT4236I - page 79

    79 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION COMMENTS P ART NUMBER Lo ...

  • Heatiator NNXT4236I - page 80

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 80 Beginning Manufacturing Date: Aug 2009 Ending Manufacturing Date: ______ NNXT3933I, NNXT4236I C. Service Parts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in th ...

  • Heatiator NNXT4236I - page 81

    81 Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 D. Optional Components A B C D LDS33/LDS46 Decorative Shroud E D A C B LDS-BV Decorative Shroud 20 in. [508 mm] 17 in. [432 mm] 9-3/8 in. [238 mm] TCG375 T erra Cotta Cap LDSCP-M Shroud Leg Multipack (not shown) See your Heatilator dealer for a complete listing of optional components. C ...

  • Heatiator NNXT4236I - page 82

    Heatilator • Novus NNXT • 4055-879 • Rev . o • 2/12 82 E. Contact Information - NOTES - ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ___________ ...

Fabricant Heatiator Catégorie Indoor Fireplace

Les documents que nous recevons du fabricant de l'appareilHeatiator NNXT4236I peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Heatiator
- manuels d’utilisations NNXT4236I
- fiches produit Heatiator
- dépliants
- ou étiquettes-énergie Heatiator NNXT4236I
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Heatiator NNXT4236I.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Heatiator NNXT4236I, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Heatiator NNXT4236I. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Heatiator NNXT4236I.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Heatiator NNXT4236I, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Heatiator NNXT4236I par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Heatiator NNXT4236I.

Le manuel d’utilisation complet Heatiator, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Heatiator NNXT4236I - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Heatiator NNXT4236I, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHeatiator NNXT4236I qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Heatiator NNXT4236I - qui devraient nous aider dans les premières étapes lors de l'utilisation Heatiator NNXT4236I
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Heatiator NNXT4236I
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Heatiator NNXT4236I dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Heatiator NNXT4236I?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Heatiator NNXT4236I, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Heatiator NNXT4236I il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)