-
Cisco Systems SLM2008RF - page 1
Cis c o Small Busine s s S LM2008 8-P or t Gigabit Smar t Swit ch with PD and AC Pow er ADMINISTR A TION GUIDE ...
-
Cisco Systems SLM2008RF - page 2
© 2009 Cisco Syst ems , Inc. All rights r eser ved. OL-19923-01 CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisc o StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and A ...
-
Cisco Systems SLM2008RF - page 3
Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide iii Con t e n ts Chapter 1: Introduction 1 Chapter 2: Getting to Know the Cisco SLM2008 Switch 2 Front Pan el 2 Back Panel 3 Side Panels 3 Chapter 3: Connecting the Cisco SLM2008 Switch 5 Placement Options 5 Desktop Option 5 Wall-Mount Option 6 Connecting the Cis ...
-
Cisco Systems SLM2008RF - page 4
Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide iv Con t e n ts Port 18 Configuring Port Settings 18 Configuring Static Link Aggregation 20 Configuring LACP Settings 21 Displaying LACP Status 23 VLAN 24 Configuring VLAN Settings 24 Configuring VLAN Port Settings 25 Security 27 Configuring 802.1X Settings 27 Co ...
-
Cisco Systems SLM2008RF - page 5
Cisco S LM2008 8-P or t Gigabit Smart Switch wi th PD and A C Power Administration Guide v Con t e n ts Appendix A: Specifications 57 Appendix B: Where to Go From Here 60 ...
-
Cisco Systems SLM2008RF - page 6
1 Cisco S LM2008 8-P or t Gigabit Smart Switch wi th PD and A C Power Administration Guide 1 In tro duction The Cisco S LM2008 8-por t Gigabit Smar t Swit ch with PD and AC P ower allows you t o upgrade your existing network by replacing y our current work group hub or swit ch. At the same time, you can configur e advanced featur es f or se curity ...
-
Cisco Systems SLM2008RF - page 7
2 Cisco S LM2008 8-P or t Gigabit Smart Switch wi th PD and A C Power Administration Guide 2 Get ting to Know the Cis c o SLM2008 Sw itch This chapt er de scribes the external f eatures of the Cisco S LM2008 8-Port Gigabit Smar t Swit ch with PD and AC P ower . The f ollowing sections are included: • Fro nt Pa ne l, p a ge 2 • Ba c k Pa ne l , ...
-
Cisco Systems SLM2008RF - page 8
Get ting to Know the Cisc o SLM2008 Switch Back Pa nel Cisco S LM2008 8-P or t Gigabit Smart Switch wi th PD and A C Power Administration Guide 3 2 B ack Panel The Ethernet por ts are locat ed on the back panel of the switch. Por t 1 — This por t suppor ts the IEEE 802.3af P ower -over -Ethernet (P oE) PD standard, which enables a syst em to r ec ...
-
Cisco Systems SLM2008RF - page 9
Get ting to Know the Cisc o SLM2008 Switch Side Pane ls Cisco S LM2008 8-P or t Gigabit Smart Switch wi th PD and A C Power Administration Guide 4 2 Res et But ton — The reset but t on can be us ed to r e set or reboot the swit ch. • Reb oo t —If the button is pres sed f or les s than 10 se conds, the switch will re bo o t . • Restor e Fact ...
-
Cisco Systems SLM2008RF - page 10
3 Cisco S LM2008 8-P or t Gigabit Smart Switch wi th PD and A C Power Administration Guide 5 C onne c ting the Cis c o SLM2008 Switch This chapter will guide you thr ough the hardwar e installation f or the Cisc o SLM2008 8-Port Gigabit Smar t Swit ch with PD and AC P ower . The f ollowing sections are included: • Placement Options, p age 5 • C ...
-
Cisco Systems SLM2008RF - page 11
Conne cting the Cis co SLM2008 Switch Placement Options Cisco S LM2008 8-P or t Gigabit Smart Switch wi th PD and A C Power Administration Guide 6 3 W all-Mount Option NOTE Y ou will need t wo suitable screws t o mount the switch. Cisc o is not responsible f or damages incurred by inse cur e wall-mounting hardwar e. Sug ge st e d Mo unti ng H ard w ...
-
Cisco Systems SLM2008RF - page 12
Conne cting the Cis co SLM2008 Switch Conne c ting the Cis co SLM2008 Switch to the Network Cisco S LM2008 8-P or t Gigabit Smart Switch wi th PD and A C Power Administration Guide 7 3 STEP 3 Inser t a screw int o each hole and leave 3 mm of its head expose d. STEP 4 The wall-mount slots ar e t wo crisscross slots on the b ottom panel of the swit c ...
-
Cisco Systems SLM2008RF - page 13
Conne cting the Cis co SLM2008 Switch Conne c ting the Cis co SLM2008 Switch to the Network Cisco S LM2008 8-P or t Gigabit Smart Switch wi th PD and A C Power Administration Guide 8 3 NOTE When you connect your network device s, make sur e you do not e xceed the maximum cabling distance of 328 f e et ( 100 met ers). T o connect network devic es t ...
-
Cisco Systems SLM2008RF - page 14
4 Cisco S LM2008 8-P or t Gigabit Smart Switch wi th PD and A C Power Administration Guide 9 S et ting Up the Cis c o SLM2008 S witch This chapt er des cribes how to configur e the Cisco S LM2008 8-Port Gigabit Smar t Switch with PD and A C Power using the web-bas ed configuration utilit y . The f ollowing se ctions ar e included: • Launching the ...
-
Cisco Systems SLM2008RF - page 15
Set ting Up the Cis co SLM2008 S witch Naviga ting the Utilit y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 10 4 Lo gin Window STEP 6 If this is your first time acces sing the web-base d utility , f ollow these steps at the login window : a. Enter admin in the Username field b. Enter admin in the Password ...
-
Cisco Systems SLM2008RF - page 16
Set ting Up the Cis co SLM2008 S witch Naviga ting the Utilit y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 11 4 • QoS • STP • Statistics • Multicast • Admin Sys tem The Syst em Set tings window is the first w indow displayed when y ou lo g in. • System Settings —Displa ys a summar y of switc ...
-
Cisco Systems SLM2008RF - page 17
Set ting Up the Cis co SLM2008 S witch Naviga ting the Utilit y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 12 4 • 802. 1 X Set tings —Configure securit y settings that include 802. 1 X mode, R ADIUS IP , Radius UDP por t , k ey string or Admin Stat e authentication mode. • 802. 1 X Parameter —Enab ...
-
Cisco Systems SLM2008RF - page 18
Set ting Up the Cis co SLM2008 S witch Naviga ting the Utilit y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 13 4 Multic ast This window displays the multicast setting s f or the switch. • IGMP S ettings —C onfigur e functions that include Enable IGMP Snooping, Enable Unregist ered IP Multicast Flooding ...
-
Cisco Systems SLM2008RF - page 19
5 Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 14 Advanc e d C onfigura tion This chapt er des cribes how to configur e the Cisco S LM2008 8-Port Gigabit Smar t Switch with PD and A C Power using the web-bas ed configuration utilit y . Se t up The first window displa yed upon login is the System Settings wi ...
-
Cisco Systems SLM2008RF - page 20
Advance d Configura tion Using the Help Sys tem Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 15 5 Example with Help Example with Help Exp anded ...
-
Cisco Systems SLM2008RF - page 21
Advance d Configura tion Syst em Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 16 5 Sys te m C onfiguring System S et tings The Syst em > Syst em Set tings window di spla ys a summar y of switch inf ormation. T o configure the syst em s ettings , f ollow the se ste ps : STEP 1 Click System > System Set ...
-
Cisco Systems SLM2008RF - page 22
Advance d Configura tion Syst em Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 17 5 • De fa ult Gatewa y —Displays the IP address of the gatewa y bet ween this device and management stations that e xist on other net work segments . The default value is 0.0. 0. 0 . • DHCP Ser ver — T he IP addr e ss o ...
-
Cisco Systems SLM2008RF - page 23
Advance d Configura tion Por t Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 18 5 STEP 4 Reboot the switch by going to the Admin > Reboot window . From ther e, click Rebo ot . Por t This section de scribe s how t o configure the por t set tings of the switch. • Co nfiguring Port S et tings, p age 18 • ...
-
Cisco Systems SLM2008RF - page 24
Advance d Configura tion Por t Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 19 5 The P or t > Port Set tings window displa ys the current por t settings of the switch. T o configure por t set tings, follow these steps: STEP 1 Click Por t > Por t Set tings . STEP 2 Configure the por t settings . • Po ...
-
Cisco Systems SLM2008RF - page 25
Advance d Configura tion Por t Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 20 5 - 100 F ull —Suppor ts 100 Mbps full- duple x operation. - 1000 F ull —Suppor ts 1000 Mbps full- duple x operation. - Disa bled —Disable s the por t . • Flow C ontrol —Check this check box t o enable flow control. • ...
-
Cisco Systems SLM2008RF - page 26
Advance d Configura tion Por t Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 21 5 The Port > Static Link Aggregation wind ow displays the curr ent static link aggregation set tings. T o configure static link aggr e gation, f ollow these steps : STEP 1 Click P or t > S tat i c L in k A g gr e gat io n . ...
-
Cisco Systems SLM2008RF - page 27
Advance d Configura tion Por t Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 22 5 T o avoid cr eating a loop in the net wor k , be sur e you enable LACP bef ore connecting the p ort s, and also disc onnect the por ts b ef ore disabling L ACP . NOTE LAG por t members will have t o be c onfigured with the same ...
-
Cisco Systems SLM2008RF - page 28
Advance d Configura tion Por t Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 23 5 STEP 3 Click Sav e . Displa ying L A CP St a tus Fr om the Port > L ACP Status window , yo u can see the L ACP status f or each por t , its par tner por t number , and operational p or t k ey . T o displa y L ACP status, f o ...
-
Cisco Systems SLM2008RF - page 29
Advance d Configura tion VL AN Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 24 5 STEP 2 Click Re fresh to updat e the status inf ormation. VL AN This section de scribes how to configure the VLAN set tings f or the switch: • Co nfiguring VL AN S ettin gs, page 24 • Configurin g VL AN Por t Set tings, p a ...
-
Cisco Systems SLM2008RF - page 30
Advance d Configura tion VL AN Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 25 5 The VLAN > VL AN Set tings window allows you t o creat e or delete a VLAN. T o configure or change VL AN settings , f ollow these steps : STEP 1 Click VL AN > VL AN S et tings . STEP 2 T o cr eate a single VL AN, ent er t ...
-
Cisco Systems SLM2008RF - page 31
Advance d Configura tion VL AN Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 26 5 T o configure VLAN P or t Set tings, f ollow thes e st eps : STEP 1 Click VL AN > VL AN Por t S et tings . STEP 2 Configure the VLAN por t set tings by adding the r equired set tings f or each interface. • Enable Tx Force ...
-
Cisco Systems SLM2008RF - page 32
Advance d Configura tion Secu ri t y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 27 5 f or warded t o the VL AN based on the PVID of its ingress por t . All frame type s ar e sele ct ed by defa ult . • PVID (Por t VL AN identifier) — VL AN ID assigned to untagged frames r e ceived on the interface. The ...
-
Cisco Systems SLM2008RF - page 33
Advance d Configura tion Secu ri t y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 28 5 r esp onse to the switch, which it f or wards t o the R ADIUS ser ver . The R ADIUS ser ver verifies the client identity and send s an acce ss challenge b ack t o the client . The EAP packet fr om the R ADIUS ser ver cont ...
-
Cisco Systems SLM2008RF - page 34
Advance d Configura tion Secu ri t y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 29 5 The Securit y > 802. 1 X S ettings window displays the current 802. 1 X set tings f or the swit ch. T o configure the 802. 1 X set tings, f ollow the se steps: STEP 1 Click S ecurit y > 802. 1 X Set tings . STEP 2 I ...
-
Cisco Systems SLM2008RF - page 35
Advance d Configura tion Secu ri t y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 30 5 STEP 3 In the 802. 1 X Se tting T able section, s elect the f ollowing : • Admin S tate —Sele ct one of the f ollowing options from the dr op- down menu t o s et the authentication mode : - Auto —Requires a dot 1 x ...
-
Cisco Systems SLM2008RF - page 36
Advance d Configura tion Secu ri t y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 31 5 The Securit y > 802. 1 X P arameter window displa ys the current 802. 1 X paramet ers . T o configure the 802. 1 X parameters, f ollow these steps: STEP 1 Click S ecurit y > 802. 1 X Parameter . STEP 2 Enter the f o ...
-
Cisco Systems SLM2008RF - page 37
Advance d Configura tion Secu ri t y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 32 5 C onfiguring Sta tic MAC Addres s Static MAC Addr es s allows you t o configu r e a switch port with the MAC addres s of one or more devices that ar e authorized to acces s the net work through that por t . The MAC addres ...
-
Cisco Systems SLM2008RF - page 38
Advance d Configura tion Secu ri t y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 33 5 STEP 3 Click Sav e . C onfiguring Management Acc e ss List The Se curity > Management Ac ces s List window specifies which S our c e IP addr e sse s can manage the device. T o configure the management acces s list , f ...
-
Cisco Systems SLM2008RF - page 39
Advance d Configura tion Secu ri t y Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 34 5 • Management IP addres s 4 —Ent er the IP addr es s of a f our th device that you wish t o allow manage the switch. • Management IP addres s 5 —Enter the IP address of a fif th device that you wish t o allow manag ...
-
Cisco Systems SLM2008RF - page 40
Advance d Configura tion QoS Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 35 5 • Multicast Rate —Sele ct the storm contr ol multicast rate threshold fr om the list or select the default value, No Limit . STEP 3 Click Sav e . Qo S C onfiguring QoS S et tings Network traf fic is usually unpr edictable and ...
-
Cisco Systems SLM2008RF - page 41
Advance d Configura tion QoS Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 36 5 The QoS > QoS Set tings window displa ys the current QoS set tings. T o configure the QoS settings , f ollow the se steps. STEP 1 Click QoS > Qo S Sett in gs . STEP 2 Set the Queue Mode to Strict Priori t y or WRR. • Stri ...
-
Cisco Systems SLM2008RF - page 42
Advance d Configura tion QoS Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 37 5 WRR Queue Mode STEP 3 Fr om the dr op- down menu, select the QoS Mode of QoS Disable d, 802. 1 p, Por t Based, or DSCP . QoS Mo de Priorit y Diagram • 802. 1 p —802. 1 p QoS Mo de allows you t o spe cify data pack et priorit ...
-
Cisco Systems SLM2008RF - page 43
Advance d Configura tion QoS Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 38 5 802. 1 p QoS Mo de - Prioritize T raffic —Allows you to select a traffic prioritization set ting. The default value is Custom . - 802. 1 p S ettings — The default 802. 1 p set tings ar e shown in the f ollowing table : T able ...
-
Cisco Systems SLM2008RF - page 44
Advance d Configura tion QoS Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 39 5 • Por t-B ase d —Por t -Base d QoS mode allows you t o s et priority levels f or each por t . Por t-B as ed Q oS Mo de - Por t-B ase d S et tings — This allows customizat ion of priorit y levels f or specific p orts . By de ...
-
Cisco Systems SLM2008RF - page 45
Advance d Configura tion QoS Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 40 5 DSCP - DSCP S et tings —DS CP Set tings enable mapping D SCP value s t o specific priority levels . The def ault D SCP set tings ar e shown in the f ollowing table : • DSCP V alue —Indicates the Dif f erentiat ed S er vice ...
-
Cisco Systems SLM2008RF - page 46
Advance d Configura tion ST P Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 41 5 STP This section de scribes c onfiguring the S TP set tings. • Configurin g STP Set tings, p age 41 • Displaying STP Sta tus, p age 43 C onfiguring STP Set tings The Spanning T ree Algorithm (S T A) can be us ed to det e ct ...
-
Cisco Systems SLM2008RF - page 47
Advance d Configura tion ST P Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 42 5 • System Pri orit y —Bridge priorit y is use d in selecting the root device , r oot por t , and designated por t . The device with the highe st priority be comes the ST A root device. However , if all device s ha ve the same ...
-
Cisco Systems SLM2008RF - page 48
Advance d Configura tion ST P Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 43 5 Displa ying STP St a tus The STP > STP Status window displays the STP Status f or Bridge ID and f or each port . T o display the S TP status, f ollow these steps: STEP 1 Click STP > STP Status . STEP 2 The STP status inf o ...
-
Cisco Systems SLM2008RF - page 49
Advance d Configura tion Sta tistics Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 44 5 - Root ID — The Root ID is display ed here. • STP Por t Status STP Status on each int er face since the devic e was last r efreshed. - Por t — The numb er of the por t . - Path Co st — The best p ath be tween d ev ...
-
Cisco Systems SLM2008RF - page 50
Advance d Configura tion Sta tistics Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 45 5 Displa ying Statistics O ver view The Statistics > Statistics Over view window displays the standar d statistic s on network traf fic f or each por t of the device. T o display the statistics over view , f ollow thes e ...
-
Cisco Systems SLM2008RF - page 51
Advance d Configura tion Sta tistics Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 46 5 • Rx E r r o r s —Displays the number of received pack ets with errors that ha ve occurred on the por t since the device was last r efreshed. • Tx Broa dcast —Displa ys the numb er of good broadcast packets transm ...
-
Cisco Systems SLM2008RF - page 52
Advance d Configura tion Mult ica st Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 47 5 • Querier —Indicates the IGMP rout er is active or idle. • Querie s T ransm it ted —Displays the number of queries that hav e be en transmitted. • Querie s Rec eived —Displa ys the number of queries that have ...
-
Cisco Systems SLM2008RF - page 53
Advance d Configura tion Mult ica st Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 48 5 The Multicast > IGMP S ettings window displays the current IGMP settings . NOTE All functions list ed on the M ulticast > IGMP Set tings window r equire “Enable IGMP Snooping” to be enabled b ef ore setting s wi ...
-
Cisco Systems SLM2008RF - page 54
Advance d Configura tion Admin Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 49 5 STEP 3 Click Sav e . Adm in This section de scribes how to configure the administration settings of the switch. • Configurin g Ping, page 50 • Configurin g Port Mirror , page 51 • Restoring Factor y D efault, p age 52 • ...
-
Cisco Systems SLM2008RF - page 55
Advance d Configura tion Admin Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 50 5 Configuring Ping Y ou can use a ping to see if another site on the network can be reached. Ping sends ICMP echo r eque st pack ets t o another node on the net work . The Admin > Ping window displa ys the current ping sett in ...
-
Cisco Systems SLM2008RF - page 56
Advance d Configura tion Admin Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 51 5 C onfiguring Por t Mirror Y ou can mirror tra f fic from an y s our ce p ort to a target por t f or real-time analysis. The target por t speed should match or e xceed s our ce por t spe ed, other wise traffic may be dropped fro ...
-
Cisco Systems SLM2008RF - page 57
Advance d Configura tion Admin Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 52 5 STEP 3 Click Sav e . Re storing F actor y D efault The Admin > F actor y Default window allows you t o r estor e the swit ch ’ s factor y default set tings. T o r estor e the switch ’ s fact or y default set tings, f oll ...
-
Cisco Systems SLM2008RF - page 58
Advance d Configura tion Admin Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 53 5 Reb ooting the S witch The Admin > Reboot window allows you t o reboot the switch. The curr en t configuration set tings are r etaine d. T o r ebo ot the swit ch, f ollow thes e st eps : STEP 1 Click Admin > Reboot . STEP ...
-
Cisco Systems SLM2008RF - page 59
Advance d Configura tion Admin Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 54 5 S a ving C onfiguration Set tings The Admin > Save C onfiguration window allows y ou to save and retrieve the switch ’ s configura tion inf ormation. When saving th e configuration, there ar e two options : • The Configu ...
-
Cisco Systems SLM2008RF - page 60
Advance d Configura tion Admin Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 55 5 T o sav e the switch settings to a configuration file (.cfg), f ollow thes e st eps : STEP 1 Click Admin > Save Configuration . STEP 2 In the Configuration B ackup section, click P r oceed . STEP 3 Click Sav e when prompt ed ...
-
Cisco Systems SLM2008RF - page 61
Advance d Configura tion Admin Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 56 5 STEP 3 L ocate the appropriat e file and click Open . STEP 4 Click Pr oceed t o load the file. ...
-
Cisco Systems SLM2008RF - page 62
A Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 57 Sp e cific a tions This appendix details the specificatio ns f or the Cis co S LM2008 8-P or t Gigabit Smar t Swit ch with PD and A C Power . Spe cific a tions Ports 5 RJ-45 conne ct ors f or 10BAS E- T / 100BAS E- T X / 1000BAS E- T Aut o MDI/MDI- X Aut one ...
-
Cisco Systems SLM2008RF - page 63
Spe cifications Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 58 A Number of VL ANs 16 Active VLANs ( 4096 range) VLAN Port-base d and 802. 1Q tag-based VLANs HOL Blocking Head of Line Blocking Prevention Management W eb Us er Inte r face Built -in web UI f or easy br owser -based c onfi gur atio n Firm ware ...
-
Cisco Systems SLM2008RF - page 64
Spe cifications Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 59 A Schedul ing Priorit y Queuing and W eighted Round Robin (WRR) Class of S er vice Port-based 802. 1 p VLAN Priority b ased IP v 4/v6 IP D SCP bas ed Stan dards 802.3 10BAS E- T Ethernet , 802.3u 100BAS E- T X F ast Ethernet , 802.3ab 1000BAS E ...
-
Cisco Systems SLM2008RF - page 65
B Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 60 Wher e to Go F rom Her e Cisco provides a wide range of r es our ce s t o help you and your cust omer obtain the full benefits of the Cisc o SLM2008 8-Port Gigabit Smar t Switch with PD and AC Powe r. Produc t Re s ource s Suppor t Cisco Small Busine ss Supp ...
-
Cisco Systems SLM2008RF - page 66
Where to Go F rom Here Cisco S LM2008 8-P or t Gigabit Smart Switch with PD and AC Power Administration Guide 61 B Cisco Small Business Home www . ci sc o. co m / s mb Mark etplace w w w .cisc o.com/ go/marketplace ...
Avez-vous une question à propos de Cisco Systems SLM2008RF?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Cisco Systems SLM2008RF, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Cisco Systems SLM2008RF il est probable qu’il a envie de partager la façon de le résoudre.