Manuel d’utilisation MGE UPS Systems 66244

69 pages 0.88 mb
Télécharger

Aller à la page of 69

Summary
  • MGE UPS Systems 66244 - page 1

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 1/69 Minislot 66244 Transverse 66074 Environment Sensor 66846 ...

  • MGE UPS Systems 66244 - page 2

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 2/69 Table of Contents 1 MGE NETWORK SOLUTION ____________________________________________________________4 1.1 I NTRODUCTION _____________________________________________________________________4 1.1.1 C ...

  • MGE UPS Systems 66244 - page 3

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 3/69 3.5 C ONFIGURATION __________________________________________________________________30 3.5.1 Network Settings _____________________________________________________________ 31 3.5.2 System __________ ...

  • MGE UPS Systems 66244 - page 4

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 4/69 1 MGE Network Solution 1.1 Introduction Z provides information on events concerning the su ppl y of power to the computers connected to your computer network, Z carries out automatic shutdown of comp ...

  • MGE UPS Systems 66244 - page 5

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 5/69 Z makes this information available to the con nected applications ( Network Shu tdown Modules , Web Browser, Network Ma nagement Systems, Enterpris e Power Manager ) Operation may be in standard secu ...

  • MGE UPS Systems 66244 - page 6

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 6/69 1.1.4 Connection Before installing the MGE Network Solution, the U PS must be set up as indicated in the step s belo w. Z Shut down the computers to be protected by the UPS. Connect the UPS to a wall ...

  • MGE UPS Systems 66244 - page 7

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 7/69 1.4 Direct sending of E-mail When a UPS event occurs, the Netw ork Management Ca rd can directly notify up to 4 intranet or extranet addressees by e-mail (see Email Notification and Email Message Set ...

  • MGE UPS Systems 66244 - page 8

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 8/69 1.8 Technical data 1.8.1 Configuration The user can configure the card with one of the following means: Z Web brow ser Z Local serial link Z Telnet console Z BOOTP/DHCP Z Mupgrade 1.8.2 Administratio ...

  • MGE UPS Systems 66244 - page 9

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 9/69 Z Recording of events and mea surement s in the card log Z Possibility of shutting down the installation in the event of a threshold bei ng exceeded or on opening / closure of a dry contact Z Connect ...

  • MGE UPS Systems 66244 - page 10

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 10/69 2 Installation and Configuration For the following sections, read the installatio n manual supplied with the card or availabl e for download on the www.mgeups .com web site in the “ Download area ...

  • MGE UPS Systems 66244 - page 11

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 11/69 3 Supervision / Administration via a Web browser A JVM (Java Virtual Machine) is required to ens ure corre ct display of information in HTML pages . Z On a computer equipped with a W eb browser (Int ...

  • MGE UPS Systems 66244 - page 12

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 12/69 3.2 UPS 3.2.1 “UPS properties” page Z This page gives instant access to the e sse ntial information about your UPS. This page is automatically refreshed every 10 seco nds (by default). To change ...

  • MGE UPS Systems 66244 - page 13

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 13/69 • • Battery operation • • Loss of communication with the UPS • • Battery fault • (green outlet) • Outlet powered – Flashing when an on/off sequence is in progress • (red outlet) ...

  • MGE UPS Systems 66244 - page 14

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 14/69 3.2.2 On-line help On-line contextual help in English is available at the top of each p age by cli cking on the Help link, which is always located on the top right corner. The Help page always open ...

  • MGE UPS Systems 66244 - page 15

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 15/69 3.2.3 3-Phase display Click 3-phase display to access to the detailed monitorin g page This item is added to the menu for all single UPSs h aving a three-phase output. The link on the gauge symbols ...

  • MGE UPS Systems 66244 - page 16

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 16/69 3.2.3.2 Battery measurements 3.2.3.3 By Pass measurements 3.2.4 UPS Control Click on the “UPS Control” section in the menu. If the UPS is not compatible with this func tion, a warning message is ...

  • MGE UPS Systems 66244 - page 17

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 17/69 Z The main outlet has priority over the auxiliary outlets. Shutdown of the main outlet causes the auxiliary outlets to shut down. Auxiliary outlets can only be started if the main outlet is powered ...

  • MGE UPS Systems 66244 - page 18

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 18/69 3.2.5 UPS weekly schedule programming Click on the “Weekly schedule” se ction of the menu. If the UPS is not compatible with this func tion, a warning message is sent to the user. UPS configurat ...

  • MGE UPS Systems 66244 - page 19

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 19/69 3.2.6 Shutdown parameters Z Click on the “ Shutdo wn parameters ” section in the menu to see the list of parameters . Important note: For installations that do not use Net work Shutdown Module ( ...

  • MGE UPS Systems 66244 - page 20

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 20/69 Z Restart after is the minimum shutd own time before restarting the UPS after a shutdown sequen ce. It is thus possible to limit repeated restarts that may be due to several successive utility failu ...

  • MGE UPS Systems 66244 - page 21

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 21/69 3.2.7 Viewing the alarms Z Click on the “Alarm table” section in the menu to view the list of curre nt ala rms. The table of managed alarms is included in the appendix . Note : The alarm number ...

  • MGE UPS Systems 66244 - page 22

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 22/69 3.3 Logs 3.3.1 Measurements Click on the “Measurem ents” section in the menu . The following measurements a re saved and time-stamped: Z “Input voltage” : Value of the utility voltage supply ...

  • MGE UPS Systems 66244 - page 23

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 23/69 ...

  • MGE UPS Systems 66244 - page 24

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 24/69 3.3.2 Event log Click in the “Event log” section of the menu . Z “Save Log” enables all valu es saved to be opened or saved in CSV format (compatible with Excel type spreadsheets). Z “Clea ...

  • MGE UPS Systems 66244 - page 25

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 25/69 3.3.3 System log Click in the “System log” section in the menu. Z “Save” enables all values saved to be opened o r saved in CSV format (compatible with Excel type spreadsheets). Z “Clear? ...

  • MGE UPS Systems 66244 - page 26

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 26/69 3.4 Notification 3.4.1 Email Notification The card offers the possibility of redirecting UPS alarms to an e-mail serv er. The format of these e-mails is compatible with mobile telephone tran sfer sy ...

  • MGE UPS Systems 66244 - page 27

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 27/69 Z Recipient List: On the right side of this page, up to four recipient s ca n be configured to receive e-mails from the ca rd. Each addressee has its own trigger event s, se lected from the left sid ...

  • MGE UPS Systems 66244 - page 28

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 28/69 3.4.2 Email Message Settings This page enables customisation of the conte nt of the messages re ceived by recipients of e-mails sent by the card. Customisation is common to the four recipients th at ...

  • MGE UPS Systems 66244 - page 29

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 29/69 - ...

  • MGE UPS Systems 66244 - page 30

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 30/69 3.5 Configuration The parameters of this menu can only be modified after entering the “User Name” and “Passwo rd”. The following screen is proposed automatically: User Name and pass word by ...

  • MGE UPS Systems 66244 - page 31

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 31/69 3.5.1 Network Settings Click on the “ Network ” section in the menu. This menu enables the administrator to configu re the netwo rk parameters of the card and auth orisation of the remote upgrad ...

  • MGE UPS Systems 66244 - page 32

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 32/69 Mode of card operation with server: after any re boot, if this option is en abled, the card tries to re cove r the network parameters from the server for 10 sec. If no re sponse is received from the ...

  • MGE UPS Systems 66244 - page 33

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 33/69 3.5.2 System Click the “System ” section in the menu. This menu enables the customisation of the informatio n on the UPS properties and Environment pages. Z UPS contact: This text field is limit ...

  • MGE UPS Systems 66244 - page 34

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 34/69 Z Environment log interval: [from 5 to 99999 sec ]. Tempe ratu re an d humidity measurem ent save period. Default value = 300 sec. (only visible if the sensor i s present). Z Environment refresh rat ...

  • MGE UPS Systems 66244 - page 35

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 35/69 3.5.3 Notified Applications Click the “Notified Application” section in the men u. Security: the administrator has to enter his lo gin/pa ssword to view this information. This menu enables: Z Th ...

  • MGE UPS Systems 66244 - page 36

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 36/69 Z Remove : Depending on the kind of application, the selecte d ones will definitively disappear from the table as SNMP applications, or they will disappear and au tomatically re-subscribe a s the Ne ...

  • MGE UPS Systems 66244 - page 37

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 37/69 This page is used to define either the shutdown or the notification settings u s ed by the Netwo rk Shutdown Modules that connect to Network Management Ca rd . These settings are used by the Network ...

  • MGE UPS Systems 66244 - page 38

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 38/69 Z Enter New Manager Login: Text field limited to 10 characters. Enables secure access and modification of pages. Default value “MGEUPS”. Z Enter New Password: Text field limited to 10 characters ...

  • MGE UPS Systems 66244 - page 39

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 39/69 Z Change Trap Port Number: Numeric field limited to 65534. Enable s forwarding of trap s sent by the card to a port other than the port usually used for SNMP. Default value 162. Z SSL Activation: Wh ...

  • MGE UPS Systems 66244 - page 40

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 40/69 3.5.6 Time Click the “Time” section in the menu. This menu enables initialisation of the date and time of the card in three different ways. Z Synchronise manually : Enables initialisation of the ...

  • MGE UPS Systems 66244 - page 41

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 41/69 The card uses the NTP protocol (UDP 123 port) an d the fire wall mu st be set accordingly, no error message is generated if the time server contact fails Z Daylight Saving Time: Enables co rre ction ...

  • MGE UPS Systems 66244 - page 42

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 42/69 Z Connection to the Network Management Card by CAT5 straight RJ4 5 network ca bles (maximum card/sensor distance: 20m ) 3.6.2 Environment status For both measurements, a graduate d gau ge propo ses ...

  • MGE UPS Systems 66244 - page 43

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 43/69 3.6.3 Environment Settings The environment sensor measures temperature, humidity and gives the status of the 2 contacts (use d for door, alarms or generator unit). The temperature and humidity thres ...

  • MGE UPS Systems 66244 - page 44

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 44/69 Hysteresis must be set to prevent multiple notificatio ns if humidity fluctuates around a threshold. Default value is 5%. (Advanced parameters) The high alarm cannot be rea ctivated while humidity r ...

  • MGE UPS Systems 66244 - page 45

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 45/69 4 Servers protection 4.1 Set-up of the shutdown parameters The Network Shutdown Module, on protected se rver b oot, subscribes itself automatically to Notified Applications list and sends its essent ...

  • MGE UPS Systems 66244 - page 46

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 46/69 4.1.1.3 Shutdown when backup time is less than When the Network Management Card detects that the pe rcentage of backup time re maini ng is less than the value set, the shutdown sequence is started. ...

  • MGE UPS Systems 66244 - page 47

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 47/69 4.1.4.1 Load shedding or sequential shutdown It is possible to optimise backup time by shutting down non -prio rity equipment or sequencing the shutdo wn of several devices. Two shutdown criteria ar ...

  • MGE UPS Systems 66244 - page 48

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 48/69 4.2 The different server and UPS shutdown sequences 4.2.1 Extended power outage, shutdown initiated by the Shutdow n Timer During battery backup time, the Shutdo wn Timer of the Network Management C ...

  • MGE UPS Systems 66244 - page 49

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 49/69 4.2.1.3 Programmable outlet 2 Shuts down after Shutoff Delay 2 after having stopped the serve rs Restarts when utility power is resto red by applying Restart Delay 2 Trap 29 ShutoffDelay 2 Restart T ...

  • MGE UPS Systems 66244 - page 50

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 50/69 4.2.2 Extended power outage, shutdow n initiated by the “Low batter y power” message When the ”Low battery power” message is di splayed, the UPS is shut off after taking into account the shu ...

  • MGE UPS Systems 66244 - page 51

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 51/69 UM-Client Shutdow Rebo Outlet 2 OFF ...

  • MGE UPS Systems 66244 - page 52

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 52/69 4.2.3 Extended power outage, shutdown initiate d by the Shutdown Timer, but utility restoration before the end of the Shutdown Duration If utility power is restored before the end of the Shutdow n D ...

  • MGE UPS Systems 66244 - page 53

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 53/69 4.2.3.3 Programmable outlet 2 Trap 29 ShutoffTimer.2 Restart Dela y .2 Trap 31 Shutdow n Trap 32 UM-Client Shutdow Rebo Outlet 2 OFF ...

  • MGE UPS Systems 66244 - page 54

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 54/69 4.2.4 Off/On command Off/On command is sent from the “UPS control” page After a power on, controls are disabled during 120 secon des to allow the server to re boot. 4.2.4.1 Main outlet Utility O ...

  • MGE UPS Systems 66244 - page 55

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 55/69 4.2.4.3 Programmable outlet 2 Trap 29 ShutoffTimer.2 Restart Dela y .2 Trap 31 Shutdow Trap 32 UM-Client Shutdow Rebo Outlet 2 OFF ...

  • MGE UPS Systems 66244 - page 56

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 56/69 5 Configuring a set of cards with Mupgrade This feature is particularly useful to configure large UPSs installed base. The Remote configuration features of Mupgrade allo ws you to import, modify and ...

  • MGE UPS Systems 66244 - page 57

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 57/69 Please Enter Your Choice => 6.1.1 Choice 1: SNMP agent configuration menu The blue lines are those displayed on scree n. +============ ================== ===================== =================== ...

  • MGE UPS Systems 66244 - page 58

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 58/69 Text field limited to 10 characters . Enables secure access to the sectio ns of the Configuration menu. Default value “MGEUPS”. b. BOOTP/DHCP Enabled : Enabled Authorises the configuration of ne ...

  • MGE UPS Systems 66244 - page 59

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 59/69 Please Enter Your Choice => This menu enables configuration of access to the four supervisi on statio ns (identif ied by the IP address) with read/write community names differe nt to t hose alrea ...

  • MGE UPS Systems 66244 - page 60

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 60/69 6.2 Configuration via Telnet You can access the configuration men u (see “ configuration in local mode ” secti on) from a station equipped with the Telnet protocol. As soon as the card is access ...

  • MGE UPS Systems 66244 - page 61

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 61/69 Select SSH : and Clic on « Open » to start connection ...

  • MGE UPS Systems 66244 - page 62

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 62/69 7 Maintenance 7.1 Software upgrade 7.1.1 Card firmware upgrade using Mupgrade (Windows) This feature is particularly useful to upgrad e a large UPS installed base in one o perati on. Read the releva ...

  • MGE UPS Systems 66244 - page 63

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 63/69 8 Appendices 8.1 Tables of alarms and events 8.1.1 Alarm table English French Battery Fault Défaut batterie Output On Battery Sortie alimentée par batterie Low Battery Fin d’autonomie UPS Over T ...

  • MGE UPS Systems 66244 - page 64

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 64/69 UPS battery exiting from minimum condition Fin batterie en charge minimum Output on battery Sortie alimentée par batterie Return on UPS Sortie sur onduleur Output on Bypass Sortie sur Bypass Bypass ...

  • MGE UPS Systems 66244 - page 65

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 65/69 Bypass switch (Q4S) clo sed Interrupteur bypass (Q4S) fermé Battery switch (QF1) closed Disjoncteur batterie QF1 fermé Battery switch (QF1) open Disjoncteur batterie QF1 ouve rt Manual bypass swit ...

  • MGE UPS Systems 66244 - page 66

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 66/69 8.1.3 System alarm table English French Cold boot Démarrage de la carte Warm boot Réinitialisation de la carte Network link up Carte connectée au réseau Network link dow n Carte déconnectée du ...

  • MGE UPS Systems 66244 - page 67

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 67/69 8.2 Glossary Bootp: Protocol based on UDP used to allocate an IP address corresponding to an Ethernet card duri ng the sta rtup phase. Defined by the RCF 951 Community name: Access key to access SNM ...

  • MGE UPS Systems 66244 - page 68

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 68/69 Communication cards to supe rvise UPS and communicate with Network Shutdown Mod ule to insure power protection on servers N ETWORK M ANAGEMENT P ROXY Communication softwa re inst alled on a PC conne ...

  • MGE UPS Systems 66244 - page 69

    www.mgeups.com Network Management Cards User Manual THE UNINTERRUPTIBLE POWER PROVIDER Network Management Card – User Manual 34003676EN/GA Page 69/69 Internet protocol used for terminal em ulation, i.e. enabling a computer to connect with a se rver as if it was a simple terminal locally connected to this server. Trap (SNMP) This term describes an ...

Fabricant MGE UPS Systems Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilMGE UPS Systems 66244 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques MGE UPS Systems
- manuels d’utilisations 66244
- fiches produit MGE UPS Systems
- dépliants
- ou étiquettes-énergie MGE UPS Systems 66244
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation MGE UPS Systems 66244.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation MGE UPS Systems 66244, manuels d’entretien, brefs manuels ou manuels de l’utilisateur MGE UPS Systems 66244. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit MGE UPS Systems 66244.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil MGE UPS Systems 66244, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser MGE UPS Systems 66244 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs MGE UPS Systems 66244.

Le manuel d’utilisation complet MGE UPS Systems, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel MGE UPS Systems 66244 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières MGE UPS Systems 66244, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lMGE UPS Systems 66244 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil MGE UPS Systems 66244 - qui devraient nous aider dans les premières étapes lors de l'utilisation MGE UPS Systems 66244
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de MGE UPS Systems 66244
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service MGE UPS Systems 66244 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de MGE UPS Systems 66244?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec MGE UPS Systems 66244, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec MGE UPS Systems 66244 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)