Français dropdown-ico

Manuel d’utilisation D-Link DI-704

35 pages 0.77 mb
Télécharger

Aller à la page of 35

Summary
  • D-Link DI-704 - page 1

    D-Link DI-704 User Manual ...

  • D-Link DI-704 - page 2

    II LIMITED WARRANTY D-Link Systems, Inc. ( “ D-Link ” ) provides this limited warranty for its product only to the person or entity who originally purchased the product from D-Link or its authorized reseller or distributor. Limited Hardware Warranty: D-Link warrants that the hardware portion of the D-Link products described below ( “ Hardware ...

  • D-Link DI-704 - page 3

    III Spare parts and spare kits Ninety (90) days D-Link ’ s sole obligation shall be to repair or replace the defective Hardware at no charge to the original owner. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or of an identical make, model or part; D-Link ma ...

  • D-Link DI-704 - page 4

    IV product shall be insured and shipped to D-Link, 53 Discovery Drive, Irvine CA 92618, with all shipping costs prepaid. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to ...

  • D-Link DI-704 - page 5

    V 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Um eine Beschädigung des Gerätes zu vermeiden sollten ...

  • D-Link DI-704 - page 6

    VI D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective proprietors. Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Cor ...

  • D-Link DI-704 - page 7

    VII television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit differ ...

  • D-Link DI-704 - page 8

    VIII Table of Contents Chapter 1 Introduction ................................................................................. 1 1.1 Functions and Features .................................................................... 1 1.2 Packing List ..................................................................................... 2 Chapter 2 Hardwar ...

  • D-Link DI-704 - page 9

    1 Chapter 1 Introduction Congratulations on your purchase of the DI-704 Broadband Router. The DI-704 is specifically designed for Small Office and Home Office needs. It provides a complete solution for Internet surfing and office resource sharing, and is easy for non-technical users to configure and operate. Instructions for installing and configur ...

  • D-Link DI-704 - page 10

    2 Internet Explorer. l Access Control supported Allows you to assign different access rights for different users. l Virtual Server supported Enables you to expose WWW, FTP and other services on your LAN to be accessible to Internet users outside of your LAN. l User-Definable Application Sensing Tunnel User can define the attributes to support the s ...

  • D-Link DI-704 - page 11

    3 Chapter 2 Hardware Installation 2.1 . Panel Layout 2.1 .1. Front Panel Figure 2-1 Front Panel RESET When RESET is pushed, system settings will be set to factory defaults. M1&M2 System status indicators, Orange . M1 is flashed once per second to indicate system is alive. When system is busy, M2 is lighted. WAN & LAN Ethernet port indicator ...

  • D-Link DI-704 - page 12

    4 Power Power inlet. This is where you connect the included power adapter. Note that, the included power adapter is DC 5V/1A. Using the wrong type of power adapter may cause damage to the DI-704 . 2.2. Installation Requirements The DI-704 can be positioned at any convenient place in your office or house. No special wiring or cooling requirements is ...

  • D-Link DI-704 - page 13

    5 Figure 2-5 Setup of LAN connections for DI-704. 2. Setup WAN connection: prepare an Ethernet cable for connecting the DI-704 to your cable/ xDSL modem or Ethernet backbone. Figure 2-5 illustrates the WAN connection. 3. Power o n : Connect the power cord to power inlet and turn the power switch on. The DI-704 will automatically enter the self-test ...

  • D-Link DI-704 - page 14

    6 Chapter 3 Network Settings and Software Installation To use the DI-704 correctly, you have to properly configure the network settings of your computers and install the attached setup program into your MS Windows platform ( Windows 95/98/ Me/ NT /2000). 3.1 Make correct network settings to the computer The default IP address of the DI-704 is 192.1 ...

  • D-Link DI-704 - page 15

    7 there must be something wrong with the installation. Follow the steps again to make sure the network settings are correct. You should check the following items in sequence: 1. Is the Ethernet cable correctly connected between the DI-704 and your computer? Tip : The LAN LED of the DI-704 and the link LED of network card on your computer must be li ...

  • D-Link DI-704 - page 16

    8 Chapter 4 Configuring The DI-704 The DI-704 provides a Web based configuration scheme, that is, configuring by Netscape Communicator or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platform. 4. 1 Start-up and Log in Activate your browser, open settings, and disable the proxy or add the IP address of t ...

  • D-Link DI-704 - page 17

    9 the System Password field and click on the Log in button. If the password is correct, the web appearance will be changed into administrator configure mode. As listed in its main menu, there are several options for system administration. 4. 2 Status This option provides the function for observing the DI-704 ’ s working status: A. WAN Port Status ...

  • D-Link DI-704 - page 18

    10 4. 3 Tools This option enables you to change the administrator password, view the log, and clone the MAC address. You can also reboot the DI-704 by clicking the Reboot button. Note: We strongly recommend that the system password be changed for security reasons. If you forget the system password, please refer to Appendix A to reset a new one. ...

  • D-Link DI-704 - page 19

    11 4. 4 Setup This option is crucial to enable the DI-704 to work properly. The setting items and the web appearance depend on the WAN type. Choose correct WAN type before you start. 1. LAN IP Address : the DI-704 ’ s IP address. The default address is 192.168.123.254. You can change it to your need. 2. WAN Type : WAN connection type of your ISP. ...

  • D-Link DI-704 - page 20

    12 4.4.1 Static IP Address WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS : enter the proper setting value provided by your ISP . 4.4.2 Dynamic IP Address 1. Host Name : optional. Required by some ISPs, for example, @Home. 2. Renew IP Forever : this feature enables the DI-704 to renew its IP address automatically when the lease tim ...

  • D-Link DI-704 - page 21

    13 4. 5 DHCP Server The settings of TCP/IP environment include Host IP, Subnet Mask, Gateway, and DNS configurations. It is not a simple task to correctly configure all the computers in your LAN environment. Fortunately, DHCP provides a rather simple approach to handle all these settings. The DI-704 supports the function of DHCP server. If you enab ...

  • D-Link DI-704 - page 22

    14 4. 6 Virtual Server The DI-704 ’ s NAT firewall filters out unrecognized packets to protect your I ntranet, so all hosts behind the DI-704 are invisible to the outside world. If you wish, you can make some of them accessible by enabling the Virtual Server Mapping . A v irtual server is defined as a Serv ice Port , and all request s to this por ...

  • D-Link DI-704 - page 23

    15 4. 7 Special AP Some applications require multiple connections, like Internet games, Video conferencing, Internet telephony and so on. Due to the firewall function, these applications can not work with a pure NAT router. Special Applications enables some of these applications to work with a NAT router. If Special Applications is still insufficie ...

  • D-Link DI-704 - page 24

    16 4. 8 Access Control Access Control allows you to assign different access rights for different users. First, you have to divide users into different groups. Users are identified by their IP addresses. You can assign the members of Group 1, 2 and 3. The others are all members of the Default Group. Second, you have to assign the access rights of ea ...

  • D-Link DI-704 - page 25

    17 4. 9 Misc Items 1. IP Address of DMZ Host : DMZ ( DeMilitarized Zone) Host is a host without the protection of firewall. It allows a computer to be exposed to unrestricted 2-way communication. Note that, this feature should be used only when needed. 2. Remote Administrator Host : In general, only Intranet users can browse the built-in web pages ...

  • D-Link DI-704 - page 26

    18 Appendix A Console Mode When you forget the system password or the IP address of the DI-704, you need to enter console mode to reset them. Before invoking the console program, be sure to find a null modem cable and use it to connect from the DI-704 ’ s COM port to your computer ’ s COM port. Then, execute a terminal program, such as the Hype ...

  • D-Link DI-704 - page 27

    19 Appendix B TCP/IP Configuration for Windows 95/98 This section describes installing the TCP/IP protocol into your personal computer. Supposing you have successfully installed one network card on your personal computer. If not, please refer to your network card manual. Moreover, the Section B.2 tells you how to set TCP/IP values for working with ...

  • D-Link DI-704 - page 28

    20 6. The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install procedure and restart your PC to enable the TCP/IP protocol. B.2 Set TCP/IP protocol for working with the DI-704 1. Click Start button and choose Settings , then click Control Panel . 2. Double click Network icon. Select the TCP/IP line that has been a ...

  • D-Link DI-704 - page 29

    21 A. Get IP via DHCP server a. Select Obtain an IP address automatically in the IP Address tab. b. Don ’ t input any value in the Gateway tab. c. Choose Disable DNS in the DNS Configuration tab. ...

  • D-Link DI-704 - page 30

    22 B. Configure IP manually a. Select Specify an IP address in the IP Address tab. The default IP address of the DI-704 is 192.168.123.254. So please use 192.168.123.xxx ( xxx is between 1 and 253) for IP Address field and 255.255.255.0 for Subnet Mask field. b. In the Gateway tab, add the IP address of the DI-704 (default IP is ...

  • D-Link DI-704 - page 31

    23 192.168.123.254) in the New gateway field and click Add button. c. In the DNS Configuration tab, add the DNS values which are provided by the ISP into DNS Server Search Order field and click Add button. ...

  • D-Link DI-704 - page 32

    24 Appendix C Technical Specifications Standards: • IEEE 802.3 10BASET-T Ethernet • IEEE 802.3u 100BASE-TX Fast Ethernet • IEEE 802.3x Flow Control • IEEE 802.1p Priority Queue • ANSI/IEEE 802.3 NWay auto-negotiation Management: • Web-Based Ports: • 4 x NWay 10BASE-T/100BASE-TX Fast Ethernet LAN • 1 x 10BASE-T WAN • 1 x RS-232 (DB ...

  • D-Link DI-704 - page 33

    25 Offices AUSTRALIA D-LINK AUSTRALASIA Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069, Australia TEL: 61-2-9417- 7100 FAX: 61-2-9417-1077 TOLL FREE: 1800-177-100 (Australia), 0800-900900 (New Zealand) URL: www.dlink.com.au E-MAIL: support@dlink.com.au , info@dlink.com.au CANADA D-LINK CANADA 218 0 Winston Park Drive, Oakville, Ontario L6H 5W ...

  • D-Link DI-704 - page 34

    26 Registration Card Print, type or use block letters. Your name: Mr./Ms _______________________________ ______________________________________________ Organization: ________________________________________________ Dept. ____________________________ Your title at organization: ________________________________________________________________________ ...

  • D-Link DI-704 - page 35

    27 ...

Fabricant D-Link Catégorie Network Router

Les documents que nous recevons du fabricant de l'appareilD-Link DI-704 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques D-Link
- manuels d’utilisations DI-704
- fiches produit D-Link
- dépliants
- ou étiquettes-énergie D-Link DI-704
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation D-Link DI-704.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation D-Link DI-704, manuels d’entretien, brefs manuels ou manuels de l’utilisateur D-Link DI-704. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit D-Link DI-704.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil D-Link DI-704, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser D-Link DI-704 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs D-Link DI-704.

Le manuel d’utilisation complet D-Link, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel D-Link DI-704 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières D-Link DI-704, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lD-Link DI-704 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil D-Link DI-704 - qui devraient nous aider dans les premières étapes lors de l'utilisation D-Link DI-704
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de D-Link DI-704
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service D-Link DI-704 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de D-Link DI-704?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec D-Link DI-704, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec D-Link DI-704 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)