-
Haier XQS60-78H - page 1
Fuzzy Computerized Automatic Washing Machine User's manual This manual is for Please read this manual carefully before using. Retain it for future reference. XQS60-78H User's manual W 0030804888A ...
-
Haier XQS60-78H - page 2
1. Heating function can be selected for "ST ANDARD", "QUICK", "JEAN" and " POSTHASTE" programs, but it's unavailable for " RINSE " process. 2. If heating function is selected, for water levels " 1 " or " 2 " , it begins to heat after water reaches the set level, and begins t ...
-
Haier XQS60-78H - page 3
Water inlet valve Water absorption cushion Handle Power cord Drain hose Round cover Top lid component Inner cover component Detergent box liquid whitener inlet Control panel Outer tub cover Balance ring Lint Filter Inner tub Front control board Cabinet Base frame Adjustable leg Fixed leg (3 pieces) Back cover Adjustable leg film Attachment block (2 ...
-
Haier XQS60-78H - page 4
The ventilation holes at the bottom Safety precautions In case the washing machine is installed on ground with carpet, be careful not to block the ventilation hole with carpet. Do not put the machine at damp place like the bathroom. Never wash it with water. Do not put wet laundries on the front control panel board. . Do not let the machine share o ...
-
Haier XQS60-78H - page 5
Do not put hand into the rotating tub. It is dangerous even if the rotation speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine. ...
-
Haier XQS60-78H - page 6
Install the bottom plate Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Installa tion and adjustment After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the bottom pl ...
-
Haier XQS60-78H - page 7
The drainage shall be smooth with the drain hose. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. Do not step on or press the drain hose. If extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not ...
-
Haier XQS60-78H - page 8
The exit end face of the faucet Confirm the water faucet Connection between the water inlet hose jointer and the water faucet water faucet, suitable water fauce t, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. 2 Loosen the s ...
-
Haier XQS60-78H - page 9
Connection between the water inlet hose and the washer Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged ...
-
Haier XQS60-78H - page 10
1 Pr epar a tion before washing Confirm if there's special requirement for the laundries. Clear the pocket. Take out the coins , sand,hairpins etc. Fasten the buttons and zippers. When the pulsator is running ,the buttons of the laundries may cause noise. For the sake of discretion ,please put the laundries with buttons into other laundries. P ...
-
Haier XQS60-78H - page 11
The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The largest capacity of this machine is 6.0 kg. The thickness ,size , type of the cloth will influence the actual washing cap ...
-
Haier XQS60-78H - page 12
4 Use the oper a tion buttons Description of the function of buttons Mode and meaning of the indicators Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode Digital tube During sensing, it displays During operation of programs, it displays the remained time (minute) or remained times of the cor ...
-
Haier XQS60-78H - page 13
POWER ON/OFF button Push the ON/OFF button to switch on the power. When the power is on, push it again to switch off the power. Push the ON/OFF button to switch on the power. If the START/PAUSE button is not pushed, the washing machine will automatically switch off the power after 5 minutes. RESERVE/CALEFACTION WATER LEVEL Time remained (minutes) R ...
-
Haier XQS60-78H - page 14
b Steps of using the operation buttons and description of the steps 10 8 6 4 2 9 7 5 3 1 FIBER COTTON WOOLLEN SILK M inutes M inutes Times M inutes Time remained (Minute ) Reserve (Hour) POWER ON/OFF START PAUSE PROGRAM WATER LEVEL SPIN RINSE WASH SOAK 1 Push the "POWER ON/OFF " button to switch on the power. POWER ON/OFF PROGRAM 2 Push t ...
-
Haier XQS60-78H - page 15
After switching on the power, the washing machine will set to common program including"wash, rinse,spin "automatically. To se lect other procedures, push the "SOAK", " WA SH", " RINSE" or "SPIN" button to select the time of soak, wash and spin, and the times of rinse. Afte r switching on the power, ...
-
Haier XQS60-78H - page 16
After switching on, the washing machine reserved wash program will be automatically set i nactive. If you desire a wash cycle to end at a reserved time, you can press the " RESERVA TION/CALEFACTION " button to set a reserved wash program. Refer to The butt on of " RESERVA TION/CALEFACTION " on page 1 1. When "RESERV ATION&q ...
-
Haier XQS60-78H - page 17
The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it with brush every two months. 7.Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. The lint filter must ...
-
Haier XQS60-78H - page 18
The digitron displays E0. The safety switch acts, and the spinning cannot work. The digitron displays E3. The water filling does not work, or is slow. After about 40 minutes later, the digital displays E4. The drainage cannot work, or is too slow. The digitron displays E1. It stops running in midway. T he digitron displays E2. The top lid is not cl ...
-
Haier XQS60-78H - page 19
Packing list Name User's manual Quantity One One Storage position Inside the document bag Inside the accessory bag Between the upper cushion of the washing machine package and the upper seal of the package carton Inner cover component Components of the water inlet hose Inside the accessory bag Eight Tapp ing screws Bottom plate One One One Ins ...
Avez-vous une question à propos de Haier XQS60-78H?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Haier XQS60-78H, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Haier XQS60-78H il est probable qu’il a envie de partager la façon de le résoudre.