-
Nextar Q4 - page 1
1 ， POWER SUPPL Y : Connect the supplied adapter to the side of the unit in the USB port. Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not the used for a long time, disconnect the plug from the outlet. NOTE: Before plugging the power cor ...
-
Nextar Q4 - page 2
2 NOTES 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with a damp cloth. 7) Do not block any of the ventilation openings. Install in accordance w ith the manufacturer's instructions. 8) Do not install near any heat sources such a ...
-
Nextar Q4 - page 3
3 W arning Failure to avoid the following potentially hazardous situations may result in injury or property damage. The unit is designed to provide you with route suggestions. It does not reflect road closures or road conditions, tr affic congestion, weather conditi ons, or other factors that may affect safety or timing w hile driving. Use the unit ...
-
Nextar Q4 - page 4
4 Note: This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Ru les. These limit s are designed to provide reasonable protection against harmf ul interference in a residential installation. This equipment generates, uses and can radiate r adio frequency energy and, if not inst all ...
-
Nextar Q4 - page 5
5 Accessories List ITEM NAME QTY Owner’s Manual 2 AC Adaptor 1 Car Adaptor 1 Mounting Bracket 1 USB Cable 1 Mounting cradle 1 T ouch Pen 1 Dashboard mount disk 1 SD Card 1 Pouch 1 NOTE Accessories and their part number are subject to modification without prior notice due to improvements. Accessories ...
-
Nextar Q4 - page 6
6 Content s …………………………………..……..…..1 ……………………………….……….…....5 ……………………………….………..…...7 ………………………………..…………....8 ……………………………….…….….….10 …………………………….……….….….12 …? ...
-
Nextar Q4 - page 7
7 1. POWER Button Press for a longer time to enter or exit the standby mode. 2. Card Port Insert the SD card into the slot. 3. Earphone Jack Connect earphone for private listening. W hen the earphone is connected to this jack, the speaker will be turned off automatically . 4. USB Port Connect to the supplied adapter to charge the unit. Used to conn ...
-
Nextar Q4 - page 8
8 Always ensure that the unit and any other external device connected to the unit are switched off and unplugged from the power supply before you attempt to connect the unit to any external device. Connecting to PC The unit is designed with a USB port which allows you to connect the unit to PC for map updating. See the below figure for details: Sys ...
-
Nextar Q4 - page 9
9 Inserting SD Card The unit is designed with SD Card jack which allows y ou to insert the SD card into the unit as shown below: T o remove the card, gently press the card in w ith your fingernail. The card unlocks and protrudes slightly . Then remove the card. Connecting to Earphones Connect the earphones to the right side of the unit for private ...
-
Nextar Q4 - page 10
10 Using the AC Adaptor The unit is supplied with an AC adaptor for powering it and charging its battery . Note: T urn unit's power off before unplugging. In the case of using the adaptor , the LCD screen will be brighter than with the rechargeable battery . Using of Car Adaptor The unit is supplied with a Car Adaptor for powering it w ...
-
Nextar Q4 - page 11
11 About Rechargeable Battery Y our portable GPS device comes with a built-in rechargeable battery . Charge the bat tery fully before initial use. Charging time is normally about 3.5 hours. A fully charged battery delivers about 2.5 hours of use. Working conditions and precautions for the rechargeable battery New batteries should be fully charg ...
-
Nextar Q4 - page 12
12 System Main Menu When in navigation mode, T ap MENU button, and then choose SETTINGS . In the SETTINGS menu, tap EXIT , a confirmation message appears. T ap Exit in the confirmation message to return to the system main menu, as shown below . In the main menu, there are four items for selecting. T ouch the corresponding item to enter . T ap to en ...
-
Nextar Q4 - page 13
13 Language T ap in the settings menu to enter Language settings menu for language selecting, as shown below: T ap the buttons to select language. Then tap to confirm or tap to cancel. Backlight T ap in the settings menu to enter Backlight settings menu for backlight adjusting, as shown below: T ap the first group buttons to adjust the backlight le ...
-
Nextar Q4 - page 14
14 Date & Time T ap in the settings menu to enter Date & Time settings menu for changing to the current time zone, as shown below: T ap the buttons to select the proper T ime Zone. T ap the buttons of Date group to change the corresponding date and tap the buttons of T ime group to change the corresponding time. T ap to return. Power T ap i ...
-
Nextar Q4 - page 15
15 Screen T ap in the settings menu, the screen will display as below : This item is used to calibrate the sensitivity of the touch screen. T ap the center of “+” as it moves around the screen. If you touch the center of “+” every time, it w ill disappear after having moved through a cycle (center → top left corner → bottom lef t corner ...
-
Nextar Q4 - page 16
16 The unit is designed with SD card slot. Y ou can insert the SD card w ith MP3 and WMA files. It supports MP3, WMA format files playback. Note: Do not store MP3 and WMA format f iles in the Flash storage, for the flash storage is used to store map data, any attempt to open the Flash storage may result in the map data missing and lost. W arning: F ...
-
Nextar Q4 - page 17
17 When you open the play list, the sy stem will look for audio files on its SD memory card and create a play list automatically . If the play list consists of more than one screen, t ap the up arrow for the previous page and the dow n arrow for the next page. In the play list, double tap the songs to st art playback. T ap ; when the button changes ...
-
Nextar Q4 - page 18
18 The unit is designed with SD card slot. Y ou can insert the SD card w ith JPEG files. It supports JPEG format files playback. Note: Do not store JPEG format files in th e Flash storage, for the flash storage is used to store map data, any attempt to open the Flash storage may result in the map data missing and lost. It lags when reading high-res ...
-
Nextar Q4 - page 19
19 If the pictures list consists of more than one screen, tap the up arrow for the previous page and the down arrow for the next page. T ap to return to previous menu. T ap a picture to select it and tap to confirm your selection. In the pictures list, double tap a picture to play it on screen, as show n below . On the playback screen, the Photo Vi ...
-
Nextar Q4 - page 20
20 When using the unit in vehicle, you can use the supplied mount accessories (mount bracket, mount cradle and dashboard mount disk) to mount the unit in the vehicle. T ake the following steps to operate: 1. See Fig. 1 to slide the mount cradle onto the end of the mount bracket. 2. See Fig. 2. Set the bottom edge of the unit onto the mount cradle. ...
-
Nextar Q4 - page 21
21 T ake steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong w ith this unit, immediately turn the power of f and disconnect the power connector from the unit. Never try to repair the unit y ourself because it is dangerous to do so. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION ...
-
Nextar Q4 - page 22
22 Other possibilities: S tatic or other external interference may cause the unit function abnormally . In order to recover normal status, please unplug the power supply cord and then plug it into the outlet again to reset the unit. If the problems still exist, please cut off the power supply and consult your service center or the qualified technic ...
-
Nextar Q4 - page 23
23 Design and specifications are subject to change without notice. TFT screen size 4.3 inches Frequency Response 20Hz - 20kHz Audio Signal-to-noise Rate ≥ 65dB Audio distortion+noise ≤ -20dB (1kHz) Channel Separation ≥ 70dB (1kHz) Dynamic Range ≥ 80dB (1kHz) Power AC 100-240V ～ 50/60Hz ; DC 5V Power Consumption < 8W Dimensions 1 17mmX8 ...
-
Nextar Q4 - page 24
26 © 2008 Nextar (Hong Kong) Limited. Nextar is a trademark and service mark of Nextar (Hong Kong) Limited. All other brand names, trademarks and service marks are property of their owners. Nextar may find it necessary to modify , amend or other wise change or update this manual. We may reserve the right to do this at any time, without any prior n ...
Avez-vous une question à propos de Nextar Q4?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Nextar Q4, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Nextar Q4 il est probable qu’il a envie de partager la façon de le résoudre.