Français dropdown-ico

Manuel d’utilisation Axis Communications Q3505-V

68 pages 1.62 mb
Télécharger

Aller à la page of 68

Summary
  • Axis Communications Q3505-V - page 1

    AXIS Q3505–V Fixed Dome Network Camera User Manual ...

  • Axis Communications Q3505-V - page 2

    About this Document This manual is intended for administrators and users of the AXIS Q3505–V Fixed Dome Network Camera, and is applicable to rmware 5.55 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Lin ...

  • Axis Communications Q3505-V - page 3

    서 사 용하 는 것을 목적 으로 하며 , 모 든 지 역에 서 사용 할 수 있 습 니 다 . 적 절히 접 지 된 STP (shielded twisted pair) 케 이 블 을 사 용 하 여 제 품 을 연 결 하 십 시오 . Safety This product complies with IEC/EN/UL 60950-1, Safety of Information Technology Equipment. If its connecting cables are ...

  • Axis Communications Q3505-V - page 4

    AXIS Q3505–V Fixed Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications Q3505-V - page 5

    AXIS Q3505–V Fixed Dome Network Camera T able of Contents Reset to Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Check the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications Q3505-V - page 6

    AXIS Q3505–V Fixed Dome Network Camera Hardware Overview Hardware Overview Note 3–9 mm lens: Pressing the lens too hard while cleaning may cause the lens to move down. If this happens while the camera is in operation, re-calibrate the optics by clicking Calibrate from the Server Maintenance web page ( System Options > Maintenance ). 8 9 10 1 ...

  • Axis Communications Q3505-V - page 7

    AXIS Q3505–V Fixed Dome Network Camera Hardware Overview 12. Camera unit 13. Dome cover 14. Springs in unit casing 15. Status LED 16. Function button Connectors and Buttons For technical specications, see page 62 . Network Connector RJ45 Ethernet connector with P ower over Ethernet (P oE). NO NO NO TICE TICE TICE The product shall be connected ...

  • Axis Communications Q3505-V - page 8

    AXIS Q3505–V Fixed Dome Network Camera Hardware Overview • Resetting the product to factory default settings. See page 57 . • Connecting to an AXIS Video Hosting System service. See page 49 . To connect, press and hold the button for about 3 seconds until the Status LED ashes green. • Connecting to AXIS Internet Dynamic DNS Service. See ...

  • Axis Communications Q3505-V - page 9

    AXIS Q3505–V Fixed Dome Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating s ...

  • Axis Communications Q3505-V - page 10

    AXIS Q3505–V Fixed Dome Network Camera Access the Product To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPS certicate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt trafc between web browsers and servers. The HTTPS certicate ensures encry ...

  • Axis Communications Q3505-V - page 11

    AXIS Q3505–V Fixed Dome Network Camera Access the Product Controls on the Live View P age Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG. Click WDR on to enable WDR in intense backlight conditions. Click WDR off to disable WDR in low light conditions for optimal exposure. Select a stream pro? ...

  • Axis Communications Q3505-V - page 12

    AXIS Q3505–V Fixed Dome Network Camera Access the Product 5. Select the desired action and congure the other settings as required. For more information about action rules, see Events on page 38 . To show the manual trigger buttons in the Live View page: 1. Go to Setup > Live View Cong . 2. Under Action Buttons , select Show manual trigge ...

  • Axis Communications Q3505-V - page 13

    AXIS Q3505–V Fixed Dome Network Camera Access the Product Note These controls are available if digital PTZ is enabled in the selected view area, see View Area on page 23 . Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer . Click the Center mode button and click in the imag ...

  • Axis Communications Q3505-V - page 14

    AXIS Q3505–V Fixed Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of avail ...

  • Axis Communications Q3505-V - page 15

    AXIS Q3505–V Fixed Dome Network Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Wi ...

  • Axis Communications Q3505-V - page 16

    AXIS Q3505–V Fixed Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Access Audio Streams The ...

  • Axis Communications Q3505-V - page 17

    AXIS Q3505–V Fixed Dome Network Camera Set Up the Pr oduct Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have acces ...

  • Axis Communications Q3505-V - page 18

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . You can congure the following: • Video stream settings. See page 18 . • Stream proles. See page 20 . • Camera settings. See page 20 . • View areas. See page 23 . • Overlay image. See ...

  • Axis Communications Q3505-V - page 19

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio • Mirror image . If required, the image can be mirrored. • Rotate image . If required, the image can be rotated. • Maximum frame rate . To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a xed amount. Alternatively , the frame rate can be set as Unli ...

  • Axis Communications Q3505-V - page 20

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio Stream Proles A stream prole is a set of predened stream settings including resolution, compression, frame rate and overlay settings. Stream proles can be used: • When setting up recording using action rules. See Events on page 38 . • When setting up continuous recording. See ...

  • Axis Communications Q3505-V - page 21

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio - White balance windows - Action rules - Settings in uploaded applications Image Appearance Increasing the Color level increases the color saturation. The value 1 00 gives maximum color saturation. The value 0 gives a black and white image. The image Brightness can be adjusted in the range 0? ...

  • Axis Communications Q3505-V - page 22

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio Wide Dynamic Range Wide dynamic range ( WDR - Forensic Capture ) provides balanced images in scenes when there is a considerable contrast between light and dark areas in the image. The camera automatically handles the transition between such scenes and low-light conditions. In rare light cond ...

  • Axis Communications Q3505-V - page 23

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio Consider an area where people or vehicles move during the day , but where there should be no movements during night. To be able to, for example, recognize faces or license plates, move the normal light priority slider toward low motion blur . At nighttime, motion detection is more important t ...

  • Axis Communications Q3505-V - page 24

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio Note The PTZ functionality is useful during installation of the Axis product. Use a view area to crop out a specic part of the full view . Note View areas will be disabled if Optical zoom for monitoring is selected. See PTZ Mode on page 1 0 . Overlay Overlays are used to provide extra info ...

  • Axis Communications Q3505-V - page 25

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio - To make a color in the overlay image transparent, select Use transparency and enter the RGB hexadecimal value for the color . Example: To make white transparent, enter #FFFFFF . - To scale the image automatically , select Scale with resolution . The image will be scaled down to t the res ...

  • Axis Communications Q3505-V - page 26

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio Privacy Mask A privacy mask is a user-dened area that prevent users from viewing parts of the monitored area. Privacy masks appear as blocks of solid color or blurred image elements and are applied on the video stream. Privacy masks cannot be bypassed using the VAPIX® application programm ...

  • Axis Communications Q3505-V - page 27

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio For more information on preset positions, see Preset P ositions on page 31 . To set limits for focus and zoom: Go to Video & Audio > Focus & Zoom . Select a Zoom tele limit value to limit the camera’s maximum zoom. The digital zoom level is indicated with the letter D. To check t ...

  • Axis Communications Q3505-V - page 28

    AXIS Q3505–V Fixed Dome Network Camera Video and Audio • Red — the signal is distorted. Use the Encoding option to select digital audio encoding format. • AAC requires a license for both encoding and decoding. AAC is the least complicated and most widely used codec. If achieving the best possible audio quality is a priority , AAC is the rec ...

  • Axis Communications Q3505-V - page 29

    AXIS Q3505–V Fixed Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 20 . • Default Viewer for Browser . See page 29 . • Viewer Settin ...

  • Axis Communications Q3505-V - page 30

    AXIS Q3505–V Fixed Dome Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recording ...

  • Axis Communications Q3505-V - page 31

    AXIS Q3505–V Fixed Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas, see View Area on page 23 . This option is only available if you have selected Optical zoom for installation . See PTZ Mode on page 1 ...

  • Axis Communications Q3505-V - page 32

    AXIS Q3505–V Fixed Dome Network Camera PTZ (Pan Tilt Zoom) Advanced Controls Advanced PTZ settings can be congured under PTZ > Advanced > Controls . The P anel Shortcut Command Buttons list shows the user-dened buttons that can be accessed from the Live View page’s Ctrl panel . These buttons can be used to provide direct access to c ...

  • Axis Communications Q3505-V - page 33

    AXIS Q3505–V Fixed Dome Network Camera Detectors Detectors Camera Tampering Camera T ampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. T o send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera Tamperi ...

  • Axis Communications Q3505-V - page 34

    AXIS Q3505–V Fixed Dome Network Camera Detectors For instructions, see Set Up Motion Detection Windows on page 34 . To control the number of motion detection alarms, the parameters Object Size , History and Sensitivity can be adjusted. See Motion Detection P arameters on page 34 . Once motion detection windows are congured, the Axis product ca ...

  • Axis Communications Q3505-V - page 35

    AXIS Q3505–V Fixed Dome Network Camera Detectors Recommended values 5–15% 60–90% 75–95% Default values 15% 90% 90% Note • To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • To avoid triggering on small objects, select a high object size. • W ...

  • Axis Communications Q3505-V - page 36

    AXIS Q3505–V Fixed Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applica ...

  • Axis Communications Q3505-V - page 37

    AXIS Q3505–V Fixed Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 37 ...

  • Axis Communications Q3505-V - page 38

    AXIS Q3505–V Fixed Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an ...

  • Axis Communications Q3505-V - page 39

    AXIS Q3505–V Fixed Dome Network Camera Events - Day/Night Mode – T rigger the rule when the product switches between day mode (IR cut lter on) and night mode (IR cut lter off). This can for example be used to control an external infrared (IR) light connected to an output port. - Live Stream Accessed – Trigger the rule when any stream is ...

  • Axis Communications Q3505-V - page 40

    AXIS Q3505–V Fixed Dome Network Camera Events Actions Available actions include: • Day/Night Vision Mode – Set day mode (IR cut lter on) or night mode (IR cut lter off). • Defog Mode – Set Defog Mode to On or Off. This action may be used to change between the modes automatically . • Output P ort – Activate an I/O port to control ...

  • Axis Communications Q3505-V - page 41

    AXIS Q3505–V Fixed Dome Network Camera Events Note Some email providers have security lters that prevent users from receiving or viewing large amount of attachments, from receiving scheduled emails and similar . Check the email provider’s security policy to avoid delivery problems and locked email accounts. To set up an email recipient using ...

  • Axis Communications Q3505-V - page 42

    AXIS Q3505–V Fixed Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 42 . • To set up action rules, see page 38 . • To access recordings, see Recording List on page 42 . • To congure camera controlled sto ...

  • Axis Communications Q3505-V - page 43

    AXIS Q3505–V Fixed Dome Network Camera Recordings 5. Click Save to save and start the recording. 43 ...

  • Axis Communications Q3505-V - page 44

    AXIS Q3505–V Fixed Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language ...

  • Axis Communications Q3505-V - page 45

    AXIS Q3505–V Fixed Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that ...

  • Axis Communications Q3505-V - page 46

    AXIS Q3505–V Fixed Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via t ...

  • Axis Communications Q3505-V - page 47

    AXIS Q3505–V Fixed Dome Network Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1. Create a self-signed certicate as described above. ...

  • Axis Communications Q3505-V - page 48

    AXIS Q3505–V Fixed Dome Network Camera System Options Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled. IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP ...

  • Axis Communications Q3505-V - page 49

    AXIS Q3505–V Fixed Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restart the product by disconnecting and reconnecti ...

  • Axis Communications Q3505-V - page 50

    AXIS Q3505–V Fixed Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the rst part of a fully qualied domain name, for example, myserver is the host name in the fully qualied domain name myserve ...

  • Axis Communications Q3505-V - page 51

    AXIS Q3505–V Fixed Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router . The router must also support UPnP TM . • In this context, router refers to any network routing device such as a NA T router , Network router , Internet Gateway , Broadband router , Broadband sharing device, or a softw ...

  • Axis Communications Q3505-V - page 52

    AXIS Q3505–V Fixed Dome Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP . Community names are used to identify groups. AXIS Video MIB (Management Information Base) for video hardware can be us ...

  • Axis Communications Q3505-V - page 53

    AXIS Q3505–V Fixed Dome Network Camera System Options Bonjour The Axis product includes support for Bonjour . Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol. Bonjour can be disabled under System Options > Network > Bonjour . Storage SD Card NO NO NO TICE TI ...

  • Axis Communications Q3505-V - page 54

    AXIS Q3505–V Fixed Dome Network Camera System Options Important If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is inserted into the Axis product. An SD card inserted into the product can be manually formatted to one of the supported le systems. To manually format the SD card, fo ...

  • Axis Communications Q3505-V - page 55

    AXIS Q3505–V Fixed Dome Network Camera System Options Accelerometer Tilt angle indicates the angle to which the camera’s lens holder is tilted. A 0° tilt is when the camera is pointing to the ground. It’s possible to have a tilt angle between 0 and 180°. To tilt to 180°, tilt to an angle of 90°, rotate the lens holder and tilt to a furthe ...

  • Axis Communications Q3505-V - page 56

    AXIS Q3505–V Fixed Dome Network Camera System Options System Overview To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview . Information that can be found here includes rmware version, IP address, network and security settings, event settings, image settings and recent log items ...

  • Axis Communications Q3505-V - page 57

    AXIS Q3505–V Fixed Dome Network Camera System Options Plain Cong Plain Cong is for advanced users with experience of Axis product conguration. Most parameters can be set and modied from this page. To open Plain Cong, go to System Options > Advanced > Plain Cong . Axis Support does not provide assistance. Reset to Factory D ...

  • Axis Communications Q3505-V - page 58

    AXIS Q3505–V Fixed Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular pro ...

  • Axis Communications Q3505-V - page 59

    AXIS Q3505–V Fixed Dome Network Camera Troubleshooting Symptoms, P ossible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try the installation again. The IP address must be set within two minutes after power has been applied to the product. Ensure the Ping length is set to 408. For instructions, see Assign IP Addr ...

  • Axis Communications Q3505-V - page 60

    AXIS Q3505–V Fixed Dome Network Camera Troubleshooting No H.264 displayed in the client Check that the relevant H.264 connection methods and correct interface are enabled in the AMC Control P anel (streaming tab). See AXIS Media Control (AMC) on page 14 . In the AMC Control P anel, select the H.264 tab and click Set to default H.264 decoder . Che ...

  • Axis Communications Q3505-V - page 61

    AXIS Q3505–V Fixed Dome Network Camera Troubleshooting No audio Incorrect setup Check the sound card in the computer . Ensure that mute is not selected and that the volume settings are correct. Check that Enable audio support is selected under Setup > System Options > Security > Audio Support . Check that the correct Audio Input source i ...

  • Axis Communications Q3505-V - page 62

    AXIS Q3505–V Fixed Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Camera Models AXIS Q3505-V 9mm (3-9 mm lens) AXIS Q3505-V 22mm (9-22 mm lens) Image sensor Progressive scan RGB CMOS 1/2.8” (effective) Lens 3-9 mm lens: Varifocal, remote focus and zoom, P-Iris control, IR corrected, ...

  • Axis Communications Q3505-V - page 63

    AXIS Q3505–V Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Mirroring of images Wide dynamic range - dynamic capture: Up to 120dB depending on scene Audio streaming T wo-way Audio compression AAC LC 8/16/32 kHz, 8-128 kbit/s G.7 1 1 PCM 8 kHz 64 kbit/s G.726 ADPCM 8 kHz 32 kbit/s or 24 kbit/s Congurabl ...

  • Axis Communications Q3505-V - page 64

    AXIS Q3505–V Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Data streaming Event data Video access from web browser Camera live view Video recording to le (ASF) Customizable HTML pages Windows Vista, XP , Windows 7, and Server 2008, Server 20 12 and Windows 8 DirectX 9c or higher For other operating sy ...

  • Axis Communications Q3505-V - page 65

    AXIS Q3505–V Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Optional accessories AXIS Intrusion Switch B Axis T90A Illuminators AXIS T9 1A/B Mounting Accessories AXIS Conduit Adapter U-Shape 20mm A AXIS T94K0 1D P endant Kit AXIS T94K0 1L Recessed Mount AXIS Microphone kit A AXIS Skin Cover A (5 nos.) Smo ...

  • Axis Communications Q3505-V - page 66

    AXIS Q3505–V Fixed Dome Network Camera T echnical Specifications 12 V max 50 m A 1 2 3 4 3. I/O congured as input 4. I/O congured as output Audio Connector 3.5 mm audio connectors (stereo) 1 2 3 1 Tip 2 Ring 3 Sleeve Audio Input Balanced Microphone Hot (+) In/Unbalance Microphone In/Line In Balanced Microphone Cold (-) In Ground Audio Outp ...

  • Axis Communications Q3505-V - page 67

    AXIS Q3505–V Fixed Dome Network Camera T echnical Specifications Wires Specications Red + DC or AC Black – DC or AC P erformance Considerations When setting up your system, it is important to consider how various settings and situations will affect performance. Some factors affect the amount of bandwidth (the bit rate) required, others can ...

  • Axis Communications Q3505-V - page 68

    User Manual V er . M3.8 AXIS Q3505–V Fixed Dome Network Camera Date: December 20 14 © Axis Communications AB, 20 14 P art No. 60820 ...

Fabricant Axis Communications Catégorie Security Camera

Les documents que nous recevons du fabricant de l'appareilAxis Communications Q3505-V peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Axis Communications
- manuels d’utilisations Q3505-V
- fiches produit Axis Communications
- dépliants
- ou étiquettes-énergie Axis Communications Q3505-V
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Axis Communications Q3505-V.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Axis Communications Q3505-V, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Axis Communications Q3505-V. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Axis Communications Q3505-V.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Axis Communications Q3505-V, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Axis Communications Q3505-V par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Axis Communications Q3505-V.

Le manuel d’utilisation complet Axis Communications, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Axis Communications Q3505-V - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Axis Communications Q3505-V, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAxis Communications Q3505-V qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Axis Communications Q3505-V - qui devraient nous aider dans les premières étapes lors de l'utilisation Axis Communications Q3505-V
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Axis Communications Q3505-V
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Axis Communications Q3505-V dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Axis Communications Q3505-V?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Axis Communications Q3505-V, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Axis Communications Q3505-V il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)