Français dropdown-ico

Manuel d’utilisation Kenwood DPX404U

79 pages 2.78 mb
Télécharger

Aller à la page of 79

Summary
  • Kenwood DPX404U - page 1

    Before reading this manual, click the button below to check the latest edition and the modified pages. IM328_Ref_E_en_01 © 2010 Kenwood Corporation All R ights Reser ved. DP X504U DP X404U DP X304 DU AL DIN SIZED CD RECEIVER INSTRUCTION MANU AL Check the latest edition ...

  • Kenwood DPX404U - page 2

    2 | DPX504U/ DPX404U/ DP X304 Co nten ts Before use 4 Component names and functions 6 General operation 8 Before Using Common Operation F unction setting Operation iPod/iPhone Operation 10 Basic Operation Selecting a song by browsing iPod Play function iPod Control by Hand Mode iPod Setting Selecting the Search mode Related Search Direct Search Alp ...

  • Kenwood DPX404U - page 3

    English | 3 DSP Setup 54 Car T ype Selec tion Speaker Setting Car T ype Fine Adjustments X’Over Setting Audio Preset Memor y Audio Preset Recall Log Function 58 Log F unction recall Log F unction item lock Deleting a Log Function item Log F unction category setting T uner Log Function time setting Bluetooth Setup 62 Bluetooth Setting Registering ...

  • Kenwood DPX404U - page 4

    Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to <Demonstration mode Setting> (page 45) . 2 W ARNING T o prevent injury or fire, take the following precautions: • Stop the car before operating the unit. • T o pre ...

  • Kenwood DPX404U - page 5

    English | 5 ...

  • Kenwood DPX404U - page 6

    6 | DPX504U/ DPX404U/ DP X304 Co mponent n ames an d functions 1 Dis c s lot When inse r ted a disc (lab el side up), the s ource is swi tched automatic ally and a s ong st ar ts play ing. 2 [ 0 ] b ut ton T o ejec t the disc . 3 [1 ] – [6] but to n T o reca ll th e m emor ized st ation. Switches t he play m od e b et ween music disc s, Audio fil ...

  • Kenwood DPX404U - page 7

    English | 7 ...

  • Kenwood DPX404U - page 8

    8 | DPX504U/ DPX404U/ DP X304 Before Using Canceling the Demonstration Mode Cancel the demonstration mode when you use it for the first time af ter installation. 1 Press the [ VOL] knob to cancel the demonstration mode when the messages “ T o cancel DEMO press the volume knob”/ “CANCEL DEMO PRESS VOL UME KNOB” are displayed (approx. 15 seco ...

  • Kenwood DPX404U - page 9

    English | 9 Function setting Operation The basic operating procedure for using this function is described below . The individual function items are covered in the operating procedures . 1 Select the source Press the [SRC ] button. F unction items var y from source to source. 2 Enter Function setting mode Press the [ VOL] knob. 3 Select the setting ...

  • Kenwood DPX404U - page 10

    10 | DPX504U/ DPX404U/ DP X304 iPod /iPh one Opera tion Basic Op eration Playing iPod • Connect an iPod When connec ted, the source is switched automatically and a song star ts playing. • Selec t iPod source Press the [iPod] button. ⁄ • KCA-iP101/iP102 (optional accessor y) is recommended to connect an iPod. Song S elect Press the [ 4 ] or ...

  • Kenwood DPX404U - page 11

    English | 11 Play function Repeat play Press the [4] button. Switches between Repeat (“File Repeat ON”/ “FILE REPEA T ”) and off (“File Repeat OFF”/ “REPEA T OFF”) when pressed. Random play Press the [3] button. Randomly plays the music. Pr essing the button toggles the setting between Random play on (“Folder Random ON”/ “FOLD ...

  • Kenwood DPX404U - page 12

    12 | DPX504U/ DPX404U/ DP X304 iPod /iPh one Opera tion iPod Setting Y ou can select the following iPod Setting items. 1 Select iPod source Press the [iPod] button. 2 Enter Function setting mode Press the [ VOL] knob. 3 T urn the [ VOL] knob and press it when the desired item is displayed. Select “Settings”/ “SET TINGS” . 4 Select the setti ...

  • Kenwood DPX404U - page 13

    English | 13 Related Search Searches for music of the same artist or genre as the one being played. 1 Select iPod source Press the [iPod] button. 2 Enter Music search mode Press the [ ] button. 3 Enter Related search mode Press the [1] button. 4 Select the S earch item T urn the [ VOL] knob and press it when the desired Search item is selected. Dis ...

  • Kenwood DPX404U - page 14

    14 | DPX504U/ DPX404U/ DP X304 Alphabet Search Y ou can select a song by alphabet. This function searches songs whose name contain the specified character(s) in the list of the selec ted Search item (artist, album, etc). 1 Select iPod source Press the [iPod] button. 2 Enter Music search mode Press the [ ] button. 3 Select search item T urn the [ VO ...

  • Kenwood DPX404U - page 15

    English | 15 4 T urn the [ VOL] knob to selec t “YES” , and then press the [ VOL] knob. “Completed”/ “COMPLETED ” is displayed. Deleting the all song from the Playlist (In Function setting mode) 1 Enter Function setting mode Press the [ VOL] knob. 2 Enter Delete Playlist mode T urn the [ VOL] knob and press it when the desired item is d ...

  • Kenwood DPX404U - page 16

    16 | DPX504U/ DPX404U/ DP X304 USB de vic e Operati on Basic Op eration Playing USB device • Connect a USB device When connec ted, the source is switched automatically and a song star ts playing. • Selec t USB source Press the [SRC ] button. Select the “USB ” display. ⁄ • CA-U1EX (optional accessor y) is recommended to connect a USB dev ...

  • Kenwood DPX404U - page 17

    English | 17 Play function Scan play Press the [2] button. Successively plays the intro of the music in the folder . When Scan Play is turned on, “File Scan ON”/ “FILE SCAN” is displayed. Pr essing this button again plays songs in the normal mode star ting with the song being played now . Random play Press the [3] button. Randomly plays the ...

  • Kenwood DPX404U - page 18

    18 | DPX504U/ DPX404U/ DP X304 Music C D / A udio file Opera tion Basic Op eration Disc play • Inser t a disc. When inser ted, the source is switched automatically and a song is star ts playing. When a CD is inser ted, the “IN” indicator is ON. • Selec t CD source Press the [SRC ] button. Select the “CD ” display. Disc ejec tion Press t ...

  • Kenwood DPX404U - page 19

    English | 19 Play function Scan play Press the [2] button. Successively plays the intro of the music in the disc or folder . When Scan Play is turned on, “ Track Scan ON”/ “ TRACK SCAN”/ ”File Scan ON”/ ”FILE SCAN” is displayed. Pr essing this button again plays songs in the normal mode star ting with the song being played now . Ran ...

  • Kenwood DPX404U - page 20

    20 | DPX504U/ DPX404U/ DP X304 T uner Operation Basic Op eration Selecting T uner source Press the [SRC ] button. Select the “ TUNER” display. Selecting the Receiving Band Press the [BAND] button. Pr essing the button switches the receiving band (FM1, FM2, FM3, AM). Selecting the Receiving station Press the [ 4 ] or [ ¢ ] button. ✍ Details o ...

  • Kenwood DPX404U - page 21

    English | 21 6 Exit Function setting mode Press the [ ] button for at least 1 second. Remarks • New s (News Bulletin with Timeout Setting) Automatically receives news bulletin when it star ts. Set the time during which interrupt is to be disabled after start of another news bulletin. Changing “News 00MIN”/ “NE WS 00M” to “News 90MIN”/ ...

  • Kenwood DPX404U - page 22

    22 | DPX504U/ DPX404U/ DP X304 T uner Operation Auto Memory Entry Putting stations with good reception in the memor y automatically . 1 Select the radio band you wish to store in the preset memory 2 Enter Function setting mode Press the [ VOL] knob. 3 Enter Auto Memory Entry mode T urn the [ VOL] knob and press it when the desired item is displayed ...

  • Kenwood DPX404U - page 23

    English | 23 PTY (Program T yp e) Selecting the Program T ype below and searching for a station. DPX504U Program T ype Display Speech “Speech” Music “Music” News “News” Curr ent Affairs “ Affairs ” Information “Info ” Sport “Spor t” Educa tion “Educat e ” Drama “Drama ” Cultur e “C ultur e ” Science “Science ? ...

  • Kenwood DPX404U - page 24

    24 | DPX504U/ DPX404U/ DP X304 T uner Operation Program T ype Preset Putting the Program T ype in the Preset button memory and quick recall. Presetting the Program T ype 1 Select the Program T ype to preset Refer to <PT Y (Program T ype)> (page 23) . 2 Preset the Program T ype Press the desired [1] — [6] button for at least 2 seconds. Recal ...

  • Kenwood DPX404U - page 25

    English | 25 ...

  • Kenwood DPX404U - page 26

    26 | DPX504U/ DPX404U/ DP X304 Bluetooth A udio Oper ation Connecting a Bluetooth Device Before use the Bluetooth device, you need to connect Bluetooth device to this unit. Pairing (Registering from Bluetooth devices) T o make your Bluetooth Audio player usable with this unit, you need to register it (pairing). 1 T urn on this unit Press the [SRC ] ...

  • Kenwood DPX404U - page 27

    English | 27 ...

  • Kenwood DPX404U - page 28

    28 | DPX504U/ DPX404U/ DP X304 Operatio n of hands- free phon ing Connecting a Bluetooth Device Before use the Bluetooth device, you need to connect Bluetooth device to this unit. The following 3 steps procedure is necessar y . Step 1. Pairing (Registering from Bluetooth devices) T o make your Bluetooth device (cell-phone) usable with this unit, yo ...

  • Kenwood DPX404U - page 29

    English | 29 Receiving a Call Answering a Phone Call Press the [ VOL] knob. ⁄ • The following operations disconnec t the line: - I nsert a CD. - Connect a USB device. • The name of the calling par ty is displayed if it has already been registered in the Phone Book . Rejecting an Incoming Call Press the [SRC ] button. During a Call Disconnecti ...

  • Kenwood DPX404U - page 30

    30 | DPX504U/ DPX404U/ DP X304 Operatio n of hands- free phon ing Call W aiting Answering Another Incoming Call with the Curr ent Call Suspended 1 Press the [ VOL] knob. 2 T urn the [ VOL] knob and press it when the desired item is displayed. Select “ ANSWER” . Answering another Incoming Call af ter T erminating the Current Call Press the [SRC ...

  • Kenwood DPX404U - page 31

    English | 31 Making a Call 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 2 Select a dialing method T urn the [ VOL] knob and press it when the desired item is displayed. Display Overview “Phonebook” Selecting the initial to be searched for the phone book. “Incoming Calls ” Calling a number in the incoming call list. ? ...

  • Kenwood DPX404U - page 32

    32 | DPX504U/ DPX404U/ DP X304 Operatio n of hands- free phon ing F unction of DPX504U with KCA-BT200/BT300 (Optional Accessory) Calling a Number in the Phone Book 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 2 Select the Phone Book mode T urn the [ VOL] knob and press it when the desired item is displayed. Select “Phonebo ...

  • Kenwood DPX404U - page 33

    English | 33 Dial a Number 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 2 Select the numb er dial mode T urn the [ VOL] knob and press it when the desired item is displayed. Select “Number Dial” . 3 Enter a phone number Operation type Operation Select the numbers. T urn the [ VOL] knob . Move to the nex t digit. P ress t ...

  • Kenwood DPX404U - page 34

    34 | DPX504U/ DPX404U/ DP X304 Operatio n of hands- free phon ing F unction of DPX504U with KCA-BT200/BT300 (Optional Accessory) Registering to the Preset D ial Numb er List 1 Select the phone number you wish to register Select the phone number with reference to the following: - <Calling a Number in the Phone Book> (page 32) - <Calling a N ...

  • Kenwood DPX404U - page 35

    English | 35 ...

  • Kenwood DPX404U - page 36

    36 | DPX504U/ DPX404U/ DP X304 Displa y Set tings F unction of DPX504U Display type selec t Press the [DISP] button. Mode Display T ype 4-line display mode Displays 3 to 4 lines of tex t. 3-line display mode Displays 2 to 3 lines of tex t. Clock display mode Displays the clock. Spectrum analyzer display mode Displays a line of text and the spectrum ...

  • Kenwood DPX404U - page 37

    English | 37 T ext scroll Press the [DISP] button for at least 1 second. The displayed tex t scrolls. “ILL UMI Dimmer” Reduces the key Illumination brightness. “ Auto” : Dims the illumination in conjunction with the Light switch of the vehicle. “Manual1” : Dims the illumination constantly . “Manual2” : Dims the illumination darker t ...

  • Kenwood DPX404U - page 38

    38 | DPX504U/ DPX404U/ DP X304 Displa y Set tings F unction of DPX504U Selec ting text display Changes displayed information on each of the following sources: 1 Select the source Press the [SRC ] button. 2 Enter Function setting mode Press the [ VOL] knob. 3 Select T ext display selection mode T urn the [ VOL] knob and press it when the desired ite ...

  • Kenwood DPX404U - page 39

    English | 39 In Disc changer source (Optional) Disc title (“Disc T itle ”) T rack title (“T rack T itle ”) Play time (“P- Time ”) Spectrum analyzer & Clock (“Speana/Clock”) Date (“Dat e”) Blank (“Blank”) ⁄ • Setting is available when the 4-line display mode, 3-line display mode, Clock display mode, or Spectrum analyz ...

  • Kenwood DPX404U - page 40

    40 | DPX504U/ DPX404U/ DP X304 F unction of DPX404U/ DPX304 T ext Display S election Changing displayed information on each source following; Press the [DISP] button. In T uner source Information Display Progr am Ser vice name (FM) “FREQUENCY/PS” Song title (FM)* “SONG TITLE” Artist name (FM)* “ ARTIST NAME” Station name (FM)* “ST A T ...

  • Kenwood DPX404U - page 41

    English | 41 Illumination Color Selec tion Selecting the I llumination Color of the panel. 1 Enter Function setting mode Press the [ VOL] knob. 2 Enter Illumination color selection mode T urn the [ VOL] knob and press it when the desired item is displayed. Select “Settings”/ “SET TINGS” > “Display & Illumination”/ “DISP & I ...

  • Kenwood DPX404U - page 42

    42 | DPX504U/ DPX404U/ DP X304 desired item is displayed. Select “Date Adjust” . 5 Adjusting Date 1. T urn the [ VOL] k nob to adjust the year . 2. Press the [ VOL] k nob. 3. T urn the [ VOL] k nob to adjust the month. 4. Press the [ VOL] k nob. 5. T urn the [ VOL] k nob to adjust the day . 6. Press the [ VOL] k nob. 6 Enter Date format mode T ...

  • Kenwood DPX404U - page 43

    English | 43 F unction of DPX504U Dual clock cit y setting Y ou can select cities for two clocks. 1 Enter Function setting mode Press the [ VOL] knob. 2 Select City S elect mode T urn the [ VOL] knob and press it when the desired item is displayed. Select “Settings” > “Clock & Date” > City Select ” 3 Select the cit y display par ...

  • Kenwood DPX404U - page 44

    44 | DPX504U/ DPX404U/ DP X304 Clock an d Other F unctions “Po wer OFF W ait”/ “P-OFF WAIT” Setting the timer to turn this unit’ s power OFF automatically when Standby mode continues. Using this setting can save the vehicle’ s battery power . “OFF” : Pow er OFF T imer function is OFF . “20MIN/M”/ “40MIN/M”/ “60MIN/M” : T ...

  • Kenwood DPX404U - page 45

    English | 45 Demonstration mode S etting T urning the demonstration mode ON/OFF . 1 Enter Function setting mode Press the [ VOL] knob. 2 Enter Demonstration mode setting T urn the [ VOL] knob and press it when the desired item is displayed. Select “DEMO Mode”/ “DEMO MODE” . 3 Set the Demonstration mode T urn the [ VOL] knob and press it whe ...

  • Kenwood DPX404U - page 46

    46 | DPX504U/ DPX404U/ DP X304 Clock an d Other F unctions Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed. 1 T urn the power ON. 2 Do the step 5 through 8 operation, and enter the Securit y Code. “ Approved”/ “ APPROVED” is displayed. Now , yo ...

  • Kenwood DPX404U - page 47

    English | 47 Deactivating S ecurity Code T o deactivate the Security Code func tion. 1 Select the Standby Press the [SRC ] button. Select the “STDBY ”/ “ST ANDBY” display. 2 Enter Function setting mode Press the [ VOL] knob. 3 Select Security Code mode T urn the [ VOL] knob and press it when the desired item is displayed. Select “Initial ...

  • Kenwood DPX404U - page 48

    48 | DPX504U/ DPX404U/ DP X304 Aud io Ad justmen ts – DP X504U – “V olume offset” Sets each source ’ s volume as a difference from the basic volume. “–8” — “±0” (AUX: “-8”— “+8” ) “2Zone ” Sets the Dual Zone Syst em. - <Dual Zone System> (page 51) . “2Zone Select” “Preset” Sets the audio preset. - ...

  • Kenwood DPX404U - page 49

    English | 49 Manual Equalizer Con trol Y ou can adjust the following Equalizer Control items. Band Item Range “BAND1” (62.5 Hz) “GAIN” Band level -9 –+9 dB “EFCT” Bass Effect “ON”/ “OFF” “BAND2” (250 Hz) “GAIN” Band level -9 –+9 dB “BAND3” (1 kHz) “GAIN” B and level -9 –+9 dB “BAND4” (4 kHz) “GAIN” ...

  • Kenwood DPX404U - page 50

    50 | DPX504U/ DPX404U/ DP X304 Aud io Ad justmen ts – DP X504U – Listening Position Selec tion The sound environment can be compensated in accordance with the selected position. According to the listening position, selec t the position from the following settings. Compensation seat Display Not compensating. “ All” Fr ont-L eft seat “Fr on ...

  • Kenwood DPX404U - page 51

    English | 51 Dual Zone Sy stem Main source and sub source (Auxiliary input) output Fr ont channel and Rear channel separately . Display Overview “2Zone Rear V olume ”* Adjust the volume of Rear channel. “0” — “35” “Detailed S etup ” “2Zone ” S ets the Dual Zone System. “ON”/ “OFF” “2Zone Select”* Specifies the dest ...

  • Kenwood DPX404U - page 52

    52 | DPX504U/ DPX404U/ DP X304 Aud io Ad justmen ts – DP X 404U / DPX304 – F unction of DPX404U/ DPX304 “DET AILED SET” “LPF SUBWOOFER” Selects cut off frequency of subwoofer output. “85”/ “120”/ “160”/ “THROUGH” (OFF) Hz “SUB-W PHASE” Selec ts the phase of subwoofer output. “REVERSE” (180°) / “NORMAL ” (0° ...

  • Kenwood DPX404U - page 53

    English | 53 ...

  • Kenwood DPX404U - page 54

    54 | DPX504U/ DPX404U/ DP X304 DSP Setup Car T ype Selec tion Y ou can compensate the delay of the sound arrival time by selecting your environment from the following car types. Display Overview “OFF” Not compensating. “C ompact” Compact car “Sedan” Sedan “W agon ” Station wagon “Minivan ” Minivan “SUV” Spor t-utility vehicl ...

  • Kenwood DPX404U - page 55

    English | 55 Reference point FRONT FRONT SUB-W REAR REAR 50cm 80cm 150cm +70cm +0cm +100cm 5 Exit Function setting mode Press the [ ] button for at least 1 second. Car T ype Fine Adjustments Adjusting fine tuning of the speaker position compensation value specified at <Car T ype Selection> (page 54) . Display Item Range “FRONT” Front spea ...

  • Kenwood DPX404U - page 56

    56 | DPX504U/ DPX404U/ DP X304 DSP Setup Audio Preset Memor y Registering the value setup by Sound Control. 1 Setup S ound Control Refer to the following operations to setup the Sound Control. - <Car T ype Selection> (page 54) - <Speaker Setting> (page 54) - <Car T ype Fine Adjustments> (page 55) - <X’ Over Setting> (page ...

  • Kenwood DPX404U - page 57

    English | 57 Audio Preset Recall Recalling the sound setup registered by <Audio Preset Memory> (page 56) . 1 Select the source Press the [SRC ] button. Select a source other than “STDBY” . 2 Enter Function setting mode Press the [ VOL] knob. 3 Enter Audio preset recall mode T urn the [ VOL] knob and press it when the desired item is displ ...

  • Kenwood DPX404U - page 58

    58 | DPX504U/ DPX404U/ DP X304 Log F unction Log Function item lock Locks the Log F unction items to prevent them from being deleted automatically . 1 Display the Log Function list Press the [LOG] button. 2 Lock the Log Function item T urn the [ VOL] knob to selec t item, and then press the [ VOL] knob for at least 1 second. Locked items are indica ...

  • Kenwood DPX404U - page 59

    English | 59 Deleting a Log Function item Deletes Log Function items. 1 Enter Function setting mode Press the [ VOL] knob. 2 Select the Log delete mode T urn the [ VOL] knob and press it when the desired item is displayed. Select “Settings” > “Log” > “L og Delete” 3 Select the Log Function item to delete T urn the [ VOL] knob to s ...

  • Kenwood DPX404U - page 60

    60 | DPX504U/ DPX404U/ DP X304 Log F unction T uner Log Function time setting Y ou can set the timing to log the station by the reception time. 1 Enter Function setting mode Press the [ VOL] knob. 2 Select the T uner Log time set mode T urn the [ VOL] knob and press it when the desired item is displayed. Select “Settings” > “Log ” > ? ...

  • Kenwood DPX404U - page 61

    English | 61 ...

  • Kenwood DPX404U - page 62

    62 | DPX504U/ DPX404U/ DP X304 Bluetooth Setup Bluetooth S etting Y ou can select the following Bluetooth Setting items. 1 Press the [LOG] button for at least 1 second. 2 T urn the [ VOL] knob and press it when the desired item is displayed. Select “Settings” . 3 Select the S etting item T urn the [ VOL] knob and press it when the desired item ...

  • Kenwood DPX404U - page 63

    English | 63 ⁄ • If the time set in the cell-phone is shor ter than that set in the unit, the former will be used. • This function does not work for call waiting. • “Bluetooth HF/Audio ” (Setting up the Voice Output Speakers) Select the speaker which is fur ther from the microphone in order to prevent howling or echoes. • “BT F/W Up ...

  • Kenwood DPX404U - page 64

    64 | DPX504U/ DPX404U/ DP X304 Bluetooth Setup Registering Bluetooth device T o make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). Y ou can register up to 5 Bluetooth devices to this unit. Registering from this unit 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 2 Enter Bluetooth ...

  • Kenwood DPX404U - page 65

    English | 65 Selecting the Bluetooth device Y ou W ish to Connect When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use. 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 2 Select Bluetooth device selec tion mode T urn the [ VOL] knob and press it when the desired ...

  • Kenwood DPX404U - page 66

    66 | DPX504U/ DPX404U/ DP X304 Bluetooth Setup Deleting a Registered Bluetooth device Y ou can delete a registered Bluetooth device. 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 2 Enter Bluetooth device deletion mode T urn the [ VOL] knob and press it when the desired item is displayed. Select “Settings” > “P AIRING ...

  • Kenwood DPX404U - page 67

    English | 67 Select “PB Name Check” (Play) 5 Press the [ VOL] knob. Select “PB Name Delete” (Delete) 5 Delete a voice tag Press the [ VOL] knob. 6 T urn the [ VOL] knob to selec t “YES” , and then press the [ VOL] knob. Exit BT Settings mode Press the [LOG] button for at least 1 second. ⁄ • Audio sound is not output during voice tag ...

  • Kenwood DPX404U - page 68

    68 | DPX504U/ DPX404U/ DP X304 Bluetooth Setup F unction of DPX504U with KCA-BT200/BT300 (Optional Accessory) Setting a V oice Command for Cat egory Add a voice tag to the phone number category (type) for voice calling. 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 2 Enter Phone Numb er type edit mode T urn the [ VOL] knob an ...

  • Kenwood DPX404U - page 69

    English | 69 ...

  • Kenwood DPX404U - page 70

    70 | DPX504U/ DPX404U/ DP X304 SMS ( Short Message Ser vice ) Downloading the SMS Download the short message (SMS) arr ived at the cell-phone so that it can be read on this unit. 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. ✍ Y ou can also selec t from “Settings” in Function setting mode. 2 Enter SMS download mode T ur ...

  • Kenwood DPX404U - page 71

    English | 71 ...

  • Kenwood DPX404U - page 72

    72 | DPX504U/ DPX404U/ DP X304 Appendix About Audio file • Pla yable Audio file AAC-L C (.m4a), MP3 (.mp3), WMA (.wma) • Pla yable disc media CD-R/R W/R OM • Pla yable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Playable USB device USB mass storage class • Pla yable USB device file system F A T16, F A T32 Even if the ...

  • Kenwood DPX404U - page 73

    English | 73 iPod/iPhone that can be connec ted to this unit Made for • iPod nano (6th generation) • iPod nano (5th generation) • iPod nano (4th generation) • iPod nano (3rd generation) • iPod nano (2nd generation) • iPod nano (1st generation) • iPod with video • iPod classic • iPod touch (4th generation) • iPod touch (3rd gener ...

  • Kenwood DPX404U - page 74

    74 | DPX504U/ DPX404U/ DP X304 T roubleshooting Guide Some func tions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer . • No output from the subwoofer . • Cannot set up the subwoofer position of Manual position setting. ▲ • The Dual zone func tion is enabled.  <Dual Zone System> (p ...

  • Kenwood DPX404U - page 75

    English | 75 Hands-free ? The hands-free talk volume is low . ✔ The hands-free talk volume is set at a low le vel.  The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk . “M ic G ai n” and “NR Leve l” <Bluetooth S etting> (page 62) . ? No sound is heard from the rear speakers. ✔ Y ou are ta ...

  • Kenwood DPX404U - page 76

    76 | DPX504U/ DPX404U/ DP X304 T roubleshooting Guide The messages shown below display your systems condition. TOC Error/TOC ERROR: • No disc has been loaded in the disc magazine. • The CD is quite dir ty. The CD is upside - down. The CD is scratched a lot. Error 05/ERROR 05: The disc is unreadable. Mecha Er ror/Mecha ERR/Error 77/ERR OR 99/ERR ...

  • Kenwood DPX404U - page 77

    English | 77 Err No Matching: The voice tag is wrong. Voice cannot be recognized because of an unregistered voice tag, etc. T oo Soft: Voice is too small and cannot be recognized. T oo Loud: Voice is too large to be recognized . T oo Long: The word or utterance is too long to be recognized . No Phonebook: Data is not contained in the phone book . N ...

  • Kenwood DPX404U - page 78

    78 | DPX504U/ DPX404U/ DP X304 Specifications subject to change without notice. FM tuner sec tion Fr equency range (50 kHz space) : 87.5 MHz – 108.0 MH z Usable sensitivit y (S/N = 26dB) DPX504U: 0.7 μV/75 Ω DPX404U/ DPX304: 1 μV/75 Ω Quieting Sensitivit y (S/N = 46dB) DPX504U: 1.6 μV/75 Ω DPX404U/ DPX304: 2.5 μV/75 Ω Fr equency respo ...

  • Kenwood DPX404U - page 79

    English | 79 Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishik awa-machi, Hachioji-shi, T okyo, 192-8525 Japan EU Representative ’ s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands The marking of products using lasers CLASS 1 LASER PRODUCT The ...

Fabricant Kenwood Catégorie Car Stereo System

Les documents que nous recevons du fabricant de l'appareilKenwood DPX404U peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Kenwood
- manuels d’utilisations DPX404U
- fiches produit Kenwood
- dépliants
- ou étiquettes-énergie Kenwood DPX404U
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Kenwood DPX404U.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Kenwood DPX404U, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Kenwood DPX404U. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Kenwood DPX404U.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Kenwood DPX404U, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Kenwood DPX404U par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Kenwood DPX404U.

Le manuel d’utilisation complet Kenwood, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Kenwood DPX404U - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Kenwood DPX404U, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lKenwood DPX404U qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Kenwood DPX404U - qui devraient nous aider dans les premières étapes lors de l'utilisation Kenwood DPX404U
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Kenwood DPX404U
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Kenwood DPX404U dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Kenwood DPX404U?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Kenwood DPX404U, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Kenwood DPX404U il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)