Français dropdown-ico

Manuel d’utilisation ADC D3LXC-SCA100

52 pages 1.21 mb
Télécharger

Aller à la page of 52

Summary
  • ADC D3LXC-SCA100 - page 1

    U SER M ANUAL Soneplex DS3 Loop Extender (D3LX) CO Module Prod uc t: D3L XC-FCA1 00, D 3LXC -SCA1 00 CLEI Code: SOCPG2GB, S OCPG2KB Soneplex DS3 Loop Extender (D3LX) RMT Module Product : D3LXR- FCA100, D 3LXR-SC A100 CLEI Code: SOCPG2HB, SOCPG2JB ...

  • ADC D3LXC-SCA100 - page 2

    LTPS-UM-801 3-03 ii August 30, 20 02 D3LX CO an d RM T Mod ules Revision History of This Manual To order co pies of th is docume nt, use document catalog number LTPS-UM-8 013-03. Related Documentation Soneple x Remot e Termin al Enclos ure Instal lation M anual ADCP-61 -704 Soneple x Two-Po sition D 3LX R emote Chassi s Installa tion Inst ructions ...

  • ADC D3LXC-SCA100 - page 3

    LTPS-UM-80 13-03 Using This Manual D3LX CO and RM T Mod ules August 30, 20 02 iii U SING T HIS M ANUAL The following conven tions are used in this man ual: • Monospace type indicates screen text. • Keys you pres s are indicated by small icons such as or . Key combinations to be press ed simultaneously are in dicated with a plus sign as fo llows ...

  • ADC D3LXC-SCA100 - page 4

    Inspecting Sh ipment LTPS-UM-801 3-03 iv August 30, 20 02 D3LX CO an d RM T Mod ules ...

  • ADC D3LXC-SCA100 - page 5

    LTPS -UM- 8013 -03 Tabl e of Conte nts D3LX CO and RM T Mod ules August 30, 20 02 v T ABLE OF C ONTENTS Overview _ ______ ________ ______ ________ _________ _____ _________ _____ _________ ________ __ 1 Front-Pan el Des cription______________ ______ _________ _____ _________ ________ ______ _______ 3 Protection Switching ................ .......... ...

  • ADC D3LXC-SCA100 - page 6

    Table of Content s LTPS-UM-801 3-03 vi August 30 , 20 02 D3LX CO an d RM T Modules Performance Mon itoring .................. ................. ........... ................. ............ ................ ............ .......... 29 Performing Syste m Maintenance ................ ................. ............ ................. ........... .......... ...

  • ADC D3LXC-SCA100 - page 7

    LTPS-UM-80 13-03 List of Figu res D3LX CO and RM T Mod ules August 30, 20 02 vii L IST OF F IGURES 1. D3LX CO and D3L X RMT Modules ... ................. ........... ................. ........... ................. ........... .......... ....... ..... 1 2. System Overview ................. ........... ................. ........... ................. ...

  • ADC D3LXC-SCA100 - page 8

    List of Tables LTPS-UM-801 3-0 3 viii August 30, 2002 D3LX CO and RM T Mod ules L IST OF T ABLES 1. D3LX Front-Panel Descrip tion and Status LEDs .......... ................. ................. ........... ................. ......... .. ....... 4 2. Tip and Rin g Assignments for Protection Sw itching App lications ....................... ........... ...

  • ADC D3LXC-SCA100 - page 9

    LTPS-UM -8013-03 Overvi ew D3LX CO and RM T Mod ules August 30, 20 02 1 O VERVIEW The Soneplex ® DS3 Loop Extender (D3LX) mo dules sho wn in Figure 1 are a pair of fiber-optic un its that provide DS3 service. The D3 LX CO resides at the Cen tral Office (CO) site, and the D3 LX RMT r eside s at the Custom er Premises Equipment (CPE) or remote site. ...

  • ADC D3LXC-SCA100 - page 10

    Overview LTPS-UM-801 3-03 2 August 30 , 20 02 D3LX CO and RM T Modules Figu re 2. System Overview D3LX CO 2 3 4 5 6 7 5 6 4 3 2 1 19 18 17 16 15 20 21 20 16 17 18 19 BNC panel - front T R T1 R1 T R T1 R1 L1 L2 2-4 T R T1 R1 T R T1 R1 L1 L2 2-3 PORT 2 DTE RS-232 T R T1 R1 T R T1 R1 L1 L2 2-2 T R T1 R1 T R T1 R1 L1 L2 2-1 T R T1 R1 T R T1 R1 L1 L2 1- ...

  • ADC D3LXC-SCA100 - page 11

    LTPS-UM-80 13-03 Front-P anel Descri ption D3LX CO and RM T Mod ules August 30, 20 02 3 F RON T -P ANEL D ESCRIPT ION Figure 3 shows the D3LX C O front pan el. Table 1 on page 4 describes the LED s and other front-pan el component s. For pi nout diagr ams of th e D3LX card-edge con nector, refer to “D3 LX Card-Edge Connector” o n page 38 . Figu ...

  • ADC D3LXC-SCA100 - page 12

    Front-Pa ne l Description LTPS-UM-801 3-03 4 August 30 , 20 02 D3LX CO and RM T Modules P ROTECTION S WITCHING The D3LX system may be configured for either prot ected or non -p rot ect e d mo de . For p rote ct e d mode , two modules are installed: workin g and protect. The working module carries the sig nal, while the protect module is in standby. ...

  • ADC D3LXC-SCA100 - page 13

    LTPS-UM-80 13-03 Front-P anel Descri ption D3LX CO and RM T Mod ules August 30, 20 02 5 Automatic Swit ching The 1:1 (Line) Protect mode transmits identical traffic acr oss two parallel systems. The working and protect D3LX modules provide Autom atic Pr otection Switching (APS) comp atib le with the remote D3LX module. APS is non-revert ive and bi ...

  • ADC D3LXC-SCA100 - page 14

    Preparing to Instal l D3LX Mod ules LTPS-UM-801 3-03 6 August 30 , 20 02 D3LX CO and RM T Modules P REPA RING TO I NSTALL D3LX M ODUL ES Prior to installi ng D3LX modules in chassis confir m that: • chassis are installed for each module (an LEC for the D3LX CO and a Four-Position Remote Terminal Cabinet or Two-Position QLX Rem ote B NC C hassis f ...

  • ADC D3LXC-SCA100 - page 15

    LTPS-UM-80 13-03 Installing the B NC Pa nel D3LX CO and RM T Mod ules August 30, 20 02 7 I NSTA LLI NG THE BNC P ANEL O VERVIEW The ADC BN C Panel cons ists of 14 p airs of 75 Ω BNC connectors that are part of a system that con v erts an electrical DS3 circuit at the CO site into an optical signal that us es WDM to transmit a signal across one si ...

  • ADC D3LXC-SCA100 - page 16

    Installing the B NC Panel LTPS-UM-801 3-03 8 August 30 , 20 02 D3LX CO and RM T Modules 6 From the rear of the panel, conn ect the coax end of an ADC adapte r cable to the DS3 OUT (transmit). connector. Th e connector number m u s t match the c onnector numb er on the front of the panel . 7 Connect the wire-wrap co nversion block end of th e same A ...

  • ADC D3LXC-SCA100 - page 17

    LTPS-UM-80 13-03 Installing a D3LX CO Mo dule in an LEC D3LX CO and RM T Mod ules August 30, 20 02 9 I NSTA LLI NG A D3L X CO M ODU LE IN AN LEC Use the following procedure to install D3LX CO modules in LECs: 1 Select the fiber-optic patch cord with the approp riate length (the measured dis tance from the Fibe r Dist ri but i on F ra me o r equi va ...

  • ADC D3LXC-SCA100 - page 18

    Installing a D3LX CO Mo dule in an LE C LTPS-UM-801 3-03 10 August 30, 20 02 D3LX CO an d RM T Modules Figur e 5. Routing the Fiber Patch Co rd 4 Locate the mounting slots designated for th e D3LX CO modules in the ch as sis. 5 Refer to Fi gu re 6 on p age 11 fo r D3LX CO module locations chassis and slot corre sp ond ing to the DS3 signal. – If ...

  • ADC D3LXC-SCA100 - page 19

    LTPS-UM-80 13-03 Installing a D3LX CO Mo dule in an LEC D3LX CO and RM T Mod ules August 30, 20 02 11 Figure 6. D3LX Module Locat i on s in Lo op Exte n der Ch assis 6 Remove a new module from its protective ESD packaging. If the mod ule is installed , remove it and inspect for phys ical damage. 7 Align the module with the slot and s lide the modul ...

  • ADC D3LXC-SCA100 - page 20

    Installing a D3LX CO Mo dule in an LE C LTPS-UM-801 3-03 12 August 30, 20 02 D3LX CO an d RM T Modules Figure 7. Installing the D3LX CO 9 After remov ing the protective cov er from a fiber patc h cord, clean the fiber-optic connecto r and adapter as directed in “Append ix B - Cleaning and Mating Fiber-Optic Systems” o n page 39 . P OWER V ERIFI ...

  • ADC D3LXC-SCA100 - page 21

    LTPS-UM-80 13-03 Installing a D3LX CO Mo dule in an LEC D3LX CO and RM T Mod ules August 30, 20 02 13 Verification of D3LX CO Optical P ower 1 Connect an attenuator in s eries: • Connect a patch cord from the meter to the attenu ator. • Connect a meter patch co rd from the attenuator to the module. 2 Using the retainin g latch, press the module ...

  • ADC D3LXC-SCA100 - page 22

    Installing a D3LX RM T Module in a Rem ot e Ca bin et LTPS-UM-801 3-03 14 August 30, 20 02 D3LX CO an d RM T Modules I NSTA LLI NG A D3LX RM T M ODULE IN A R EMOTE C ABINET Use the following procedure to in stall D3LX RMT modules in a Four-Posit ion Remote Terminal Cabinet o r Two-Position QLX Remote BN C Chassis. After installing the D3LX RMT modu ...

  • ADC D3LXC-SCA100 - page 23

    LTPS-UM-80 13-03 Installing a D3LX R MT Mo dule in a Re mote Cabinet D3LX CO and RM T Mod ules August 30, 20 02 15 3 Locate the mounting slots designated for th e D3LX RMT modules in the chassis. I f prot ection swi tching is required, a wor king module ins talls in the fir st slot of a quad group, s uch as 1-1 or 2-1. The protection module install ...

  • ADC D3LXC-SCA100 - page 24

    Installing a D3LX RM T Module in a Rem ot e Ca bin et LTPS-UM-801 3-03 16 August 30, 20 02 D3LX CO an d RM T Modules T WO -P OSITION QLX R EMOTE BNC C HASSIS I NSTALLATION To install first the working mod ule, and then the protect module (if installing D3LX RMT m odules in protection switching applicatio n s): 1 Open the front panel of the remote t ...

  • ADC D3LXC-SCA100 - page 25

    LTPS-UM-80 13-03 Installing a D3LX R MT Mo dule in a Re mote Cabinet D3LX CO and RM T Mod ules August 30, 20 02 17 Verification of Optical Power 1 Connect an attenuator in s eries: • Connect a patch cord from the meter to the attenu ator. • Connect a meter patch co rd from the attenuator to the module. 2 Using the retaining latch, press the mod ...

  • ADC D3LXC-SCA100 - page 26

    Provisionin g LTPS-UM-801 3-03 18 August 30, 20 02 D3LX CO an d RM T Modules 15 Store the remainin g slack fiber on the left side of th e fiber managem ent enclos ure within the remote cabinet, leaving 5 to 6 inches of slack fiber above the upper card guide to provide a service lo op. P ROVISIONING In D3LX systems, provisio n ing occurs automatical ...

  • ADC D3LXC-SCA100 - page 27

    LTPS -UM-801 3-03 Sett ing Up Syst em O pti ons D3LX CO and RM T Mod ules August 30, 20 02 19 O THER P ROVISIONING C ONSIDERATIONS Alarm Setting During Provisioning The D3LX generates alarms on conditions occurring in the D3LX CO modules DS3 facility. The severity of the alarm conditions as Critical, Major, Mino r, or Event is sel ected while provi ...

  • ADC D3LXC-SCA100 - page 28

    Setting Up Sy ste m Options LTPS-UM-801 3-03 20 August 30, 20 02 D3LX CO an d RM T Modules • 9600 bau d • No parity • 8 data bits • 1 stop bit • Hardware flow cont rol to OFF Figure 11. Connecting a Maintenance T erminal t o the SCU 5 At the maintenance terminal, p ress . The Enter User Name field appears. C ONNECTING A M AINTENANCE T ERM ...

  • ADC D3LXC-SCA100 - page 29

    LTPS -UM-801 3-03 Sett ing Up Syst em O pti ons D3LX CO and RM T Mod ules August 30, 20 02 21 5 At the maintenance terminal, press . The Enter User Name field appears. Figur e 12. C onnecting a Maintenance Terminal to the D3RCAM ENTE R Maintenance terminal Serial COM por t Interface cab le Four-position remote terminal chassis Craft port R E S E T ...

  • ADC D3LXC-SCA100 - page 30

    Setting Up Sy ste m Options LTPS-UM-801 3-03 22 August 30, 20 02 D3LX CO an d RM T Modules N AVIGATING T HROUGH C RAFT I NTERFACE M ENUS Many of the operation s that follow re quire the use o f the craft interface. To select a menu from the craft interf ace, do one of th e following: • Press the number of the menu. • Use the arrow keys to selec ...

  • ADC D3LXC-SCA100 - page 31

    LTPS-UM-80 13-03 Local Configurat ion D3LX CO and RM T Mod ules August 30, 20 02 23 L OCAL C ONFIGU RATION A D3LX system can be co nfigu red loca lly by an SCU (version 3.7 or later) with a D3LX CO module in an LEC. It can al so be config ured remotel y by a D3RCAM wit h a D3LX RMT module installed in a r emote chassis. See “Remote Configur at io ...

  • ADC D3LXC-SCA100 - page 32

    Local Conf iguration LTP S-UM-801 3-03 24 August 30, 20 02 D3LX CO an d RM T Modules 4 Configure the fields as detailed in the Tab le 5 and assign the selections by pressing . 5 Repeat Steps 2 throug h 5 for each D3LX system installed in the chassis. Press + for assi stance whe n making se lections. Table 5. D3LX CO Configuration Fields–SCU V3.7 ...

  • ADC D3LXC-SCA100 - page 33

    LTPS-UM-80 13-03 Local Configurat ion D3LX CO and RM T Mod ules August 30, 20 02 25 C ONFIGURING D3LX A LARMS Use this procedur e to set alarm indicators fo r equipment, op tical facilities, and DS3 faciliti es groups for each D3LX C O module. You can select CRITICAL (CR), MAJOR (MJ) , MINOR (MN), EVENT (EV), or NOT RPTD (n ot reported) for each fi ...

  • ADC D3LXC-SCA100 - page 34

    Local Conf iguration LTP S-UM-801 3-03 26 August 30, 20 02 D3LX CO an d RM T Modules Figure 14. D3LX Alar m Setting Men u Table 6. D3LX Alarm Level Defaults Conditio n Alarm Lev e l Def ault Equip ment A larms BOARD FAIL Major COMM FAIL Major CONFI G MISM ATCH Min or HSKP1, H SKP2 Minor PROT ECT COM M FAIL Min or OPTICA L COMM F AIL Minor VERSI ON ...

  • ADC D3LXC-SCA100 - page 35

    LTPS-UM-80 13-03 Local Configurat ion D3LX CO and RM T Mod ules August 30, 20 02 27 D ISPLAYING D3LX S TATU S Use this procedure to di sp lay the st atus of both working and pr otect modules in local and remote sites . 1 From the Main menu , select 2. Display Status . 2 From the Alarms menu, select 5. Display D3LX Status ( as sh own i n Figu re 16 ...

  • ADC D3LXC-SCA100 - page 36

    Local Conf iguration LTP S-UM-801 3-03 28 August 30, 20 02 D3LX CO an d RM T Modules V IEWI NG L OOPBACK S TATUS AND P ERFORMING L OOPBACK C OMMANDS Use this procedur e to view loopbacks and send lo opback commands for a specific D3LX system. 1 From the Main menu , select 6. System Maintenance . 2 From the System Maintenance men u , select 4. Loopb ...

  • ADC D3LXC-SCA100 - page 37

    LTPS-UM-80 13-03 Local Configurat ion D3LX CO and RM T Mod ules August 30, 20 02 29 P ERFORMANCE M ONIT OR ING Use this procedur e to monitor the performance o f modules on both the near and f ar end of D3LX systems. 1 From the Main menu , select 7. Performance Monitoring . 2 From the Performan ce Monitoring menu, s elect DS3/E3 PM Co nfiguration ( ...

  • ADC D3LXC-SCA100 - page 38

    Local Conf iguration LTP S-UM-801 3-03 30 August 30, 20 02 D3LX CO an d RM T Modules P ERFORMING S YSTEM M AINTENANCE Use this procedur e to perform the system maintenance commands listed. 1 From the Main menu , select 6. System Maintenance . 2 From the System Main tenance menu, select • 1. Force/APS Commands , and then select 1. Commands for Opt ...

  • ADC D3LXC-SCA100 - page 39

    LTPS-UM-80 13-03 Local Configurat ion D3LX CO and RM T Mod ules August 30, 20 02 31 Figur e 18. System Ma intenance–Trouble Isolation Screen S h own L OGGING O FF To log off fr om an ywhe r e on t h e sys tem du ring a Tel net se ssion , pre s s + . CTRL D ...

  • ADC D3LXC-SCA100 - page 40

    Local Conf iguration LTP S-UM-801 3-03 32 August 30, 20 02 D3LX CO an d RM T Modules R EMOVING D3LX M ODULES Figure 19. Removing a D 3LX Module–D 3LX CO Shown 1 For SC-type connectors: p ull down on the retaining latch and withdraw the unit half way ou t of the chassis while preventing the fiber-optic cord from binding. Release the fiber-optic pa ...

  • ADC D3LXC-SCA100 - page 41

    LTPS-UM-80 13-03 Remote Config uration D3LX CO and RM T Mod ules August 30, 20 02 33 R EMOTE C ONFIGU RATI ON Use the D3RCAM craft interface system menu to view or edit the configu ration for each D3 LX RMT mo dule in the chassis. This menu can also be used to equip, prov ision, assig n thresholds, and assign service state. The D3RCAM C onfigur ati ...

  • ADC D3LXC-SCA100 - page 42

    Remote Configurat ion LTP S-UM-801 3-03 34 August 30, 20 02 D3LX CO an d RM T Modules D3RCAM M ENU The D3 RCAM M ain M enu ( a s show n in Figure 21 ) displays following confi gu r atio n options: Figure 21. D3RCAM Menu Tree U NIT C ONFIGURATION Use this procedur e to configure each D3 LX RMT module installed in the remote chassis. Refer to your wo ...

  • ADC D3LXC-SCA100 - page 43

    LTPS-UM-80 13-03 Remote Config uration D3LX CO and RM T Mod ules August 30, 20 02 35 1 From the Main menu , select 3. Unit Conf igurat ion . 2 Withi n th e Un it Con fig urati on sc reen ( s e e Fig ure 22 on page 34 ), select the Group number that correspond s to the D3LX circuit you want to configure, based on the module’s posit ion in the remo ...

  • ADC D3LXC-SCA100 - page 44

    Troubleshooti ng LTPS-UM-801 3-03 36 August 30, 20 02 D3LX CO an d RM T Modules T ROUBLESHOOTING Before the system tes ts ar e started , the fiber-optic netw ork and DS3 lines at both ends must be connected . The STATUS and DS3 ONLINE LEDs should be illuminated green. Table 8 is intended as an aid in localizing trouble. If trouble is encountered wi ...

  • ADC D3LXC-SCA100 - page 45

    LTPS-UM -80 13-03 Appendi x A - Specific at io ns D3LX CO and RM T Mod ules August 30, 20 02 37 A PPENDIX A - S PECIFICAT IONS Table 9. D3LX Module Specifica tions Paramet er Specifica tions Remarks DS3 Inpu t Freque ncy Inpu t Level Interface Standard Output Signa l Line Bui ldout - Softwar e selectable Input/ Ou tput Impedan ce 44.736 Mbps +5.7 d ...

  • ADC D3LXC-SCA100 - page 46

    Appendi x A - Speci fications LTP S-UM-801 3-03 38 August 30, 20 02 D3LX CO an d RM T Modules D3LX C ARD -E DGE C ONNECTOR Figur e 23 shows the pin assign ments of the card-edge connect or on the D3LX card. Active pins are highlighted in black. Figure 23. D3LX Card-Edge Con nector -48 VDC A 19 18 17 16 15 13 12 10 9 8 7 6 5 4 3 2 32 31 30 29 28 27 ...

  • ADC D3LXC-SCA100 - page 47

    LTPS-UM-80 13-03 Appendix B - Cleani ng and Ma ting F ib er-Optic Sy stem s D3LX CO and RM T Mod ules August 30, 20 02 39 A PPENDIX B - C LEANING AND M ATING F IBER -O PTIC S YST EMS The perform ance of a fiber-optic sy stem is mainly depe nden t on the fiber-op tic connector cleaning p rocedures performed before installatio n. Clean all con nector ...

  • ADC D3LXC-SCA100 - page 48

    Appendi x B - Cle an ing and Mati ng F ib er-Op tic System s LTP S-U M -8013-0 3 40 August 30, 20 02 D3LX CO an d RM T Modules M ATING Mate the SC and FC connector s by insertin g the connector into the adapter and aligni ng the connector k ey with the adapter key slot as follows: • FC connectors —Align the housing key with the slot in the adap ...

  • ADC D3LXC-SCA100 - page 49

    LTPS-UM-80 13-03 Appen dix C - Pro duct Support D3LX CO and RM T Mod ules August 30, 20 02 41 A PPENDIX C - P RODUCT S UPPORT ADC Customer Service Gro up provides exp ert pre-sales an d post-sales support and training for all its pro ducts. Technical support is available 24 hours a day, 7 days a week by contacting the ADC Technical Assistance Cente ...

  • ADC D3LXC-SCA100 - page 50

    Appendi x D - Ab breviat ion s LTPS-UM -801 3-03 42 August 30, 20 02 D3LX CO an d RM T Modules A PPENDIX D - A BBREVIATI ONS A APS: Automati c Protecti on Switchi ng APU: Alarm Proc essing Unit ATM: Asynchronous Tran sport Mod e B BER: Bit Error Rate BNC: Ba yonet- Locking Conne ctor C CO: Central Offic e CPE : Custom er Premis es Equipm ent D DCE: ...

  • ADC D3LXC-SCA100 - page 51

    C ERTI FICA TION AND W AR RANTY FCC C LASS A C O MPLIANCE This equi pment has be en tested and fou nd to comply w ith the limits for a Class A digital device, pursuant to Part 15 of th e FCC Rules. Th ese limits are designed to provi de reas ona bl e protec tion agai nst h ar mf ul interfe re nc e when th e e quipmen t is operat ed i n a com me rc ...

  • ADC D3LXC-SCA100 - page 52

    ADC DSL Systems , Inc. 14402 Fr anklin Avenue Tustin, CA 9278 0-70 13 Tel: 714.8 32.99 22 Fax: 714. 832. 9924 Technical As sis t ance Tel: 800.3 66.38 91 x73 223 Fax: 952. 917. 3244 DNV C ertific ation, Inc. REGISTERED FIRM IS O 9001/TL 9000 D OCUMENT : LTPS-UM -8013-0 3 ´,HS¶8N¨ 1240518 ...

Fabricant ADC Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilADC D3LXC-SCA100 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques ADC
- manuels d’utilisations D3LXC-SCA100
- fiches produit ADC
- dépliants
- ou étiquettes-énergie ADC D3LXC-SCA100
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation ADC D3LXC-SCA100.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation ADC D3LXC-SCA100, manuels d’entretien, brefs manuels ou manuels de l’utilisateur ADC D3LXC-SCA100. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit ADC D3LXC-SCA100.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil ADC D3LXC-SCA100, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser ADC D3LXC-SCA100 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs ADC D3LXC-SCA100.

Le manuel d’utilisation complet ADC, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel ADC D3LXC-SCA100 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières ADC D3LXC-SCA100, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lADC D3LXC-SCA100 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil ADC D3LXC-SCA100 - qui devraient nous aider dans les premières étapes lors de l'utilisation ADC D3LXC-SCA100
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de ADC D3LXC-SCA100
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service ADC D3LXC-SCA100 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de ADC D3LXC-SCA100?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec ADC D3LXC-SCA100, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec ADC D3LXC-SCA100 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)