Manuel d’utilisation Fujitsu Siemens Computers P17-2

11 pages 0.25 mb
Télécharger

Aller à la page of 11

Summary
  • Fujitsu Siemens Computers P17-2 - page 1

    Monitor Operating Manual English SCENICVIEW P17-2 / P19-2 / P20-2 ...

  • Fujitsu Siemens Computers P17-2 - page 2

    SCENICVIEW P17-2 / P19-2 / P20-2 2 i Operation of the monitor The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation. Adjusting height, rake and rotation The monitor height can be adjusted within a range of approx. 2.5 inch/70 mm. ► Grasp the monitor with both ha ...

  • Fujitsu Siemens Computers P17-2 - page 3

    SCENICVIEW P17-2 / P19-2 / P20-2 3 Adjusting portrait format The monitor can be turned from the "wide format" (landscape mode) into the "high format" position (portrait mode). Ê Grasp the monitor with both hands on the right and left edge of the casing, move it into the highest position and turn it clockwise until it is in the ...

  • Fujitsu Siemens Computers P17-2 - page 4

    SCENICVIEW P17-2 / P19-2 / P20-2 4 Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Choosing basic monitor settings using the supplied softw are If one of the operating systems Windows 95 ...

  • Fujitsu Siemens Computers P17-2 - page 5

    SCENICVIEW P17-2 / P19-2 / P20-2 5 Locking the OSD menu The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. ► Press and hold the SELECT/MENU button for a few seconds while you sw itch on the monitor with the ON/OFF switch. A message is displayed that the action has been performed. Please proceed in th ...

  • Fujitsu Siemens Computers P17-2 - page 6

    SCENICVIEW P17-2 / P19-2 / P20-2 6 The corresponding setting window (here: Image Adjust ) is display ed (on the right-hand side). The first function ( H-Position ) is highlighted. ► If necessary, press the 6 or 5 button to mark another function. ► Press the SELECT/MENU button to select the highlighted function. ► Press the 6 or 5 button to ad ...

  • Fujitsu Siemens Computers P17-2 - page 7

    SCENICVIEW P17-2 / P19-2 / P20-2 7 Adjusting size and position Calling the Image adjust setting window H-Position Adjusting the horizontal position With this function you move the picture to the left or to the right. V-Position Adjusting the vertical position With this function you move the picture up or down. Clock Setting synchronisation With thi ...

  • Fujitsu Siemens Computers P17-2 - page 8

    SCENICVIEW P17-2 / P19-2 / P20-2 8 Setting display of the OSD menu Calling the OSD Setup setting window Language Setting language for the OSD menu With this function you choose between E nglish (default setting), French, German, Italian and Spanish as the language for the OSD menu. OSD H-Position Setting the horizontal position of the OSD menu With ...

  • Fujitsu Siemens Computers P17-2 - page 9

    SCENICVIEW P17-2 / P19-2 / P20-2 9 Displaying information Calling the Information setting window With this function the model designation, serial number, resolution, H/V frequency, input signal and polarity of the sync hronisation signal are displayed. Notes on ergonomic colour adjustment If you select colours for the display in y our app lication ...

  • Fujitsu Siemens Computers P17-2 - page 10

    SCENICVIEW P17-2 / P19-2 / P20-2 10 Troubleshooting Should an error occur, first check the following point s. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the following points: No screen disp ...

  • Fujitsu Siemens Computers P17-2 - page 11

    SCENICVIEW P17-2 / P19-2 / P20-2 11 Having this problem? Check the following points: Picture is wrongly adjusted ► Press the SELECT/MENU button to activate the function Factory Recall . The Auto Processing message is displayed. Picture disturbances (vertical lines) ► Press the EXIT/AUTO button to perform the auto- adjustment of the screen. Pict ...

Fabricant Fujitsu Siemens Computers Catégorie Computer Monitor

Les documents que nous recevons du fabricant de l'appareilFujitsu Siemens Computers P17-2 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Fujitsu Siemens Computers
- manuels d’utilisations P17-2
- fiches produit Fujitsu Siemens Computers
- dépliants
- ou étiquettes-énergie Fujitsu Siemens Computers P17-2
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Fujitsu Siemens Computers P17-2.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Fujitsu Siemens Computers P17-2, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Fujitsu Siemens Computers P17-2. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Fujitsu Siemens Computers P17-2.

Manuel d’utilisation complet de l’appareil Fujitsu Siemens Computers P17-2, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Fujitsu Siemens Computers P17-2 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Fujitsu Siemens Computers P17-2.

Le manuel d’utilisation complet Fujitsu Siemens Computers, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Fujitsu Siemens Computers P17-2 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Fujitsu Siemens Computers P17-2, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lFujitsu Siemens Computers P17-2 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Fujitsu Siemens Computers P17-2 - qui devraient nous aider dans les premières étapes lors de l'utilisation Fujitsu Siemens Computers P17-2
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Fujitsu Siemens Computers P17-2
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Fujitsu Siemens Computers P17-2 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Fujitsu Siemens Computers P17-2?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Fujitsu Siemens Computers P17-2, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Fujitsu Siemens Computers P17-2 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)