Français dropdown-ico

Manuel d’utilisation Elmo PTC-200C

33 pages 0.42 mb
Télécharger

Aller à la page of 33

Summary
  • Elmo PTC-200C - page 1

    Please read this instruction manual carefully before using this PTC-200C and keep it for future reference. P AN • TIL T • ZOOM COLOR CAMERA PTC - 200C INSTRUCTION MANUAL ...

  • Elmo PTC-200C - page 2

    1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus outdoors. 6. Do not use this apparatus near water. 7. Clean only with dry cloth. 8. Do not install near heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce h ...

  • Elmo PTC-200C - page 3

    - 2 - CAUTION • Do not use any power supply other than specified. W ARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. * The CAUTION label is attached on the base of product. INFORMA TION This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to P ...

  • Elmo PTC-200C - page 4

    Be sure to use the provided AC adapter. Do not leave the Camera under direct sunlight or by heater, or the Camera may be discolored, or damaged. Do not place the Camera in any humid, dusty, windy or vibrating location. Use the Camera in the following environmental condition: Temperature: 0 °C ~ 40 °C (32 ° ~ 104 °F) Humidity: 30% ~ 85% (No cond ...

  • Elmo PTC-200C - page 5

    - 4 - CONTENTS IMPORTANT SAFETY INSTRUCTIONS .........................................1 HANDLING PRECAUTIONS ............................................................3 1. PART NAMES AND FUNCTIONS ....................................................5 2. WIRELESS REMOTE CONTROLLER ............................................. 7 3. SETTING UP ..... ...

  • Elmo PTC-200C - page 6

    Overall View - 5 - 1. P AR T NAMES AND FUNCTIONS CAMERA HEAD INFRARED SENSOR LED BASE LENS TERMINAL BLOCK COMPOSITE-VIDEO OUT (RCA pin jack) DC IN DIP Switch (10) DIP Switch (4) RS-485 IN TERMINAL ALARM IN TERMINAL RS-485 OUT TERMINAL ALARM OUT TERMINA L INFRARED SENSOR This camera is designed to mount on ceiling panels only. ...

  • Elmo PTC-200C - page 7

    Wireless Remote Controller - 6 - POWER 1 OPEN 2 CLOSE 3 AUTO 4 NEAR 5 FAR 6 AUTO 7 TELE 8 WIDE 9 MENU 12 CURSOR/PAN-TILT 13 Directions 10 HOME 11 ID 17 RESET 15 BACK LIGHT 14 PRESET 16 NUMBER (1 6) 18 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Function To turn ON/OFF the Camera power. To open the iris manually. To close the iris manually. To iris ...

  • Elmo PTC-200C - page 8

    Point the infrared emitting window of the wireless remote controller at the infrared sensor of the Camera, located at the front, and the rear panel, and select the desired function. Receivable range - 7 - 2. WIRELESS REMOTE CONTROLLER Note: The infrared sensors may receive the infrared rays only within a narrower receivable range or may not receive ...

  • Elmo PTC-200C - page 9

    - 8 - Preparation Remove the battery case cover by pressing downward on the [ ] mark part in the direction as indicated by the arrow. Install 2 pcs. of batteries (type R03,AAA) into the case in the direction as indicated there. Note: Install the batteries with the proper to and to polarity. Note: For dry cells, be sure to use the size AAA. Note: Ch ...

  • Elmo PTC-200C - page 10

    - 9 - 3. SETTING UP Note: When carrying the Camera, be sure to hold the base. Note: Do not turn the Camera head in the PAN-TILT direction by hand, or the Camera head may be broken. HEXAGON HEAD BOLT M5x40, 4 PCS MAIN UNIT FIXING PLATE SCREW M3x5 (attached) , 4 PCS • Put 4 Hexagon Head Bolts M5x40 (supplied) through the Fixing Plate, and screw the ...

  • Elmo PTC-200C - page 11

    - 10 - • Make 4 holes of 8mm (5/16 in.) to the Ceiling Tile as shown. 70mm (2-3/4 in.) 102mm (4 in.) 54mm (2-1/8 in.) FRONT BACK CEILING TILE (t 1/2 in. 1 in.) t = thickness MOUNTING HOLE 8mm (5/16 in.), 4 LOCATIONS (2) Making mounting holes to the Ceiling Tile ...

  • Elmo PTC-200C - page 12

    - 11 - HEXAGON HEAD BOLT M5x40 (supplied), 4 PCS MAIN UNIT CEILING PLATE WING NUT M5 (supplied), 4 PCS MOUNTING HOLE: 5/16 in., 4 LOCATIONS CEILING TILE (t 1/2inch-1inch) t = thickness • Put the Ceiling Tile between the Main Unit and the Ceiling Plate, and fix the Main Unit by fastening 4 Wing Nuts. (3) Fixing the Main Unit ...

  • Elmo PTC-200C - page 13

    - 12 - CEILING PLATE CEILING TILE SAFETY WIRE LOOPING HOLE SAFETY WIRE (not supplied) • Loop up one end of the Safety Wires through the respective safety wire looping holes made on the Ceiling Plate, and then loop up the other end of the same around the beams or anything that is used to mount ceiling tile channel for structure safety. (4) Mountin ...

  • Elmo PTC-200C - page 14

    - 13 - Connection examples for the Camera ...

  • Elmo PTC-200C - page 15

    - 14 - [1] Power supply to the Camera The Camera has no POWER switch. Power is supplied to the Camera when the AC adapter is connected to the wall socket and the Camera. When power is supplied to the Camera, the Camera turns to the right and then to the center automatically (viewed from the front), returning the Camera position to the detault home ...

  • Elmo PTC-200C - page 16

    - 15 - [3] Operating P AN/TIL T • While watching the screen, press any of (UP, DOWN, LEFT, RIGHT) direction buttons for the direction in which you want to watch the image. • To change the direction minutely, jog the direction button. To change the direction largely, hold down the direction button. • Two operation modes are available according ...

  • Elmo PTC-200C - page 17

    - 16 - [4] Lens operation (1) Zoom operation • The object is zoomed in (appears larger in the screen) when TELE button of ZOOM is pressed, or zoomed out (appears smaller in the screen) when WIDE button of ZOOM is pressed. • When TELE button or WIDE button is held down for over one second, the zoom speed increases. (2) Focus operation • When A ...

  • Elmo PTC-200C - page 18

    - 17 - [5] BLC (Back Light Control) In case the back lighting is too bright to shoot the main object clearly, press BACK LIGHT button. To cancel this mode, press the button. 14 [6] Preset operation The Camera head direction, the zoom position, the focus status and the brightness level can be registered for as many as six settings. The registration ...

  • Elmo PTC-200C - page 19

    - 18 - 5. THE ID NUMBER SETTING When multiple Cameras are laid out adjacently and operated via the wireless remote controller, the Cameras receiving the infrared rays operate in unison in the same way. When each Camera is allocated with a different ID No., the Camera can be controlled independently when its ID No. is specified via the wireless remo ...

  • Elmo PTC-200C - page 20

    - 19 - 6. OSD (On-Screen Display) OSD Display menu 1 13 11 14 12 10 <<MAIN MENU>> (1) MAIN CONTROL (2) CAMERA SETUP SELECT ENTER (Return to MENU ) (3) TITLE SET (4) PAN TILT MOTOR 12 (1) MAIN CONTROL SELECT ADJUST (Return to MENU ) 12 <1> TITLE <2> SELECT <3> SET INDICATE <4> REMOTE ID <5> OFF TIMER ON/OFF: ...

  • Elmo PTC-200C - page 21

    - 20 - (2) CAMERA SETUP SELECT ADJUST (Return to MENU ) 12 <1> BLC <2> AGC <3> AP GAIN <4> FL <5> NEXT PAGE <6> MEMORY <7> CLEAR <8> WB To change the White Balance mode. <9> R SHIFT *1 <10> B SHIFT *2 <11> COLOR To adjust the color. <12> PREVIOUS PAGE ON/OFF: To balance the dif ...

  • Elmo PTC-200C - page 22

    - 21 - (3) TITLE SET SELECT ADJUST (Return to MENU ) 12 <1> MOTOR SPEED <2> SPEED <3> L/R DIRECTION • To set the title for each preset position and Camera. Make the title to be set blink, and press direction button to go to the set character. Then, set the character one by one by using direction buttons. The types of characters ...

  • Elmo PTC-200C - page 23

    - 22 - 7. ALARM IN/OUT TERMINALS By short-circuiting the ALARM 1 IN or ALARM 2 IN Terminal Block to the GND terminal on the Terminal Block, the Camera moves to the allocated preset position. • When short-circuiting the ALARM 1 IN terminal to the GND terminal, the Camera moves to the preset position 1. • When short-circuiting the ALARM 2 IN term ...

  • Elmo PTC-200C - page 24

    - 23 - DIP Switch (4) ALL CLEAR SWITCH 1 OFF 234 BASE OF MAIN UNIT DIP Switch (4) 8. ALL CLEAR SWITCH The PAN-TILT settings, the LENS settings, the preset settings, the ID settings and the Camera settings by means of the OSD can be reset to the factory-settings by turning ON the switch No. 2 of the DIP Switch (4) on the bottom of the Camera before ...

  • Elmo PTC-200C - page 25

    - 24 - This system can be controlled from the PC by connecting the RS-485 terminal on the 9-pin Terminal Block to the PC via an RS-485 converter. Make the connection as shown below. Each camera can be set for the ID address via a 10-pin DIP Switch located on the bottom so that a selected camera can be controlled. Up to 223 Cameras can be controlled ...

  • Elmo PTC-200C - page 26

    - 25 - 10. TERMINA TING RESIST ANCE AND ID ADDRESS SETTINGS The ID address of the RS-485 and the terminating resistance can be set by using the switches Nos. 1 through 9 of the DIP Switch (10) located on the bottom of the Main Unit. Switch No. 1 – 8 9 10 Function Sets the ID address. Turns ON/OFF the terminating resistance None [1] Setting the te ...

  • Elmo PTC-200C - page 27

    - 26 - Setting the ID address Camera Switch No. of DIP Switch (10) ID address 12345678 Disabled 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON ...

  • Elmo PTC-200C - page 28

    - 27 - Camera Switch No. of DIP Switch (10) ID address 12345678 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON ...

  • Elmo PTC-200C - page 29

    - 28 - 1 1. TROUBLESHOOTING HINTS If the problem still remains after checking the above, consult your nearest dealer or authorized ELMO service center. Symptom No images on TV monitor Out of focus No operation via the wireless remote control The preset position is blurry Possible cause/remedy • Cable is not properly connected to the video-in term ...

  • Elmo PTC-200C - page 30

    - 29 - 12. SPECIFICA TIONS General Camera Item Specifications Power source 12V DC Current consumption MAX.1A Outside dimensions 124mm(W) X 153mm(D) X 136mm(H) (4.9 X 6.0 X 5.4 in.) Weight /Mass mainbody only: 800g (1.8 lb), with plates: 1,100g (2.4 lb) Television system NTSC compatible Output terminal Composite-video output RCA pinjack/75 ohm unbal ...

  • Elmo PTC-200C - page 31

    - 30 - 13. SUPPLIED ACCESSORIES Pan/T ilt Other Item Specifications Pan range Left 150 ° Right 150 ° Tilt range Up 30 ° Down 90 ° Pan Tilt Speed Auto/manual (8 speed) Item Specifications Title setting Provided (Camera/preset selection) Daisy chain connection Max 223 (PTC-200C) cameras Item Quantity AC adapter Model NO: D12-10-1000 (5Z0494) 1 (r ...

  • Elmo PTC-200C - page 32

    W ARNING: Unauthorized recording of copyrighted, materials, photographs, etc. may infringe on the rights of copyright owners and be contrary to copyright laws. ELMO CO., L TD. 6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan OVERSEAS SUBSIDIARY COMP ANIES U.S.A Elmo Mfg. Corp. 1478 Old Country Road, Plainview, NY 11803-5034 Tel:(516)501-1400 Fa ...

  • Elmo PTC-200C - page 33

    Receivable range - 32 - ...

Fabricant Elmo Catégorie Camcorder

Les documents que nous recevons du fabricant de l'appareilElmo PTC-200C peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Elmo
- manuels d’utilisations PTC-200C
- fiches produit Elmo
- dépliants
- ou étiquettes-énergie Elmo PTC-200C
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Elmo PTC-200C.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Elmo PTC-200C, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Elmo PTC-200C. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Elmo PTC-200C.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Elmo PTC-200C, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Elmo PTC-200C par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Elmo PTC-200C.

Le manuel d’utilisation complet Elmo, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Elmo PTC-200C - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Elmo PTC-200C, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lElmo PTC-200C qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Elmo PTC-200C - qui devraient nous aider dans les premières étapes lors de l'utilisation Elmo PTC-200C
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Elmo PTC-200C
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Elmo PTC-200C dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Elmo PTC-200C?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Elmo PTC-200C, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Elmo PTC-200C il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)