-
Siemens SF 25T053 - page 1
...
-
Siemens SF 25T053 - page 2
...
-
Siemens SF 25T053 - page 3
en Index Safety instructions 4 . . . . . . . . . . . . . Getting to know your appliance 6 . . W ater softener 6 . . . . . . . . . . . . . . . . Filling the special salt container 7 . . Filling the rinse-aid container 8 . . . . Unsuitable dishes 9 . . . . . . . . . . . . . Arranging crockery , glasses, etc. in the dishwasher 10 . . . . . . . . . . D ...
-
Siemens SF 25T053 - page 4
en 4 Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Do not use a damaged appliance, but consult your supplier . Please dispose of packaging material properly . The corrugated cardboard consists mainly of waste paper . The polystyrene moulded parts have been foamed wi ...
-
Siemens SF 25T053 - page 5
en 5 In daily use W arning Knives and other utensils with sharp points must be placed in the baskets either flat or with the points downwards. Use the dishwasher only in the household and only for its designed purpose, i.e. for washing domestic dishes. Do not lean or sit on the open door . The appliance could tip. The water in the appliance is not ...
-
Siemens SF 25T053 - page 6
en 6 Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front. Individual positions are referred to in the text. Control panel 1 Main switch 2 Door opener 3 Time delay 4 Digital display/ Programme progress indicator 5 Salt refill indicator 6 Rinse-aid refill indicator 7 ...
-
Siemens SF 25T053 - page 7
en 7 Filling the special salt container How the salt works While washing is taking place, salt is automatically rinsed out of the salt container into the water softener where it dissolves the lime in the water . The dissolved lime is pumped out of the dishwasher . The water softening system is then ready for the next load. This process of regenerat ...
-
Siemens SF 25T053 - page 8
en 8 Filling the rinse-aid container The purpose of a rinse-aid is to prevent the formation of water marks on tableware and utensils, and to ensure that glasses are clean and sparkling. The rinse-aid is consumed during the washing process. Fold back the lid on the rinse-aid container 29 . T o open the lid, press the mark on the rinse-aid lid and si ...
-
Siemens SF 25T053 - page 9
en 9 Switching the rinse-aid indicator on or off Y ou can switch the rinse-aid indicator on or of f. This function can be changed as follows: Hold down the programme button 3 and switch on the main switch 1 , then release both buttons. The digital display 3 flashes; in the digital display 4 is indicated (rinse-aid indicator on). By pressing the pro ...
-
Siemens SF 25T053 - page 10
en 10 Damage to glassware and other dishes Possible causes: type of glass or manufacturing process chemical composition of detergent water temperature and duration of dishwasher programme. Suggested remedy: Use glassware or porcelain dishes that have been marked ’dishwasher–proof’ by the manufacturer . Use a mild detergent that is described a ...
-
Siemens SF 25T053 - page 11
en 11 Pots and pans Lower basket 27 Cutlery Cutlery should be placed in the dishwasher always unsorted and with the eating surface pointing downwards. The spray jet is then better able to reach the individual parts. T o prevent injuries, place long, pointed accessories and knives on the étagère (some models) or on the knife shelf (available as an ...
-
Siemens SF 25T053 - page 12
en 12 Shelf * * not on all models Lean tall glasses and those with long stems against the shelf – not against other items to be washed. Place glasses, cups and small bowls on the additional cup rack. The additional cup rack can be swivelled in or out as required. Small accessories holder* * some models Light-weight plastic accessories, e.g. cups, ...
-
Siemens SF 25T053 - page 13
en 13 T op basket with side levers (Rackmatic) Pull out the top basket. T o lower the basket, press in succession the two levers on the left and right sides of the basket. Always take hold of the side of the basket on the upper edge, otherwise the basket will not drop smoothly (and may damage the utensils). T o raise the basket, take hold of the ba ...
-
Siemens SF 25T053 - page 14
en 14 Detergents Information about detergents Y ou can use any brand of liquid or powder detergent, as well as tablets, that have been specifically designed for use in domestic dishwashers. (Do not use normal washing-up liquid!) Nowadays there are three types of dishwasher detergent available: 1. those containing phosphates and chlorine, 2. those c ...
-
Siemens SF 25T053 - page 15
en 15 Reduce costs! If your dishes are only moderately dirty , you may be able to use less detergent than recommended. Close the lid on the detergent compartment. Press down the lid (1) until it clicks shut (2). If you are using detergent in tablet form, read the manufacturer’s recommendations on the packaging in order to determine where the tabl ...
-
Siemens SF 25T053 - page 16
en 16 Note Optimum rinsing and drying results can be obtained by using standard detergents in conjunction with separate application of salt and rinse aid. Observance of the operating instructions or information on the packaging of the combined detergents determines their ef fectiveness. Note Even if the rinse aid and/or salt refill indicator is lit ...
-
Siemens SF 25T053 - page 17
en 17 Programme overview This overview lists the max. possible number of programmes. The programmes supplied with your appliance are indicated on the fascia. T ype of crockery e.g. china, pots/pans, cutlery , glasses, etc. T ype of food remains Amount of food remains Condition of food remains Wash programme Programme sequence Nondelicate Soups, cas ...
-
Siemens SF 25T053 - page 18
en 18 W ashing dishes Reduce costs! If only a small number of dishes have been loaded into the dishwasher , selecting a programme that operates at the next lowest temperature will usually suffice. Programme data The stated programme data are based on standard operating conditions. The values can vary considerably according to: dif ferent amounts of ...
-
Siemens SF 25T053 - page 19
en 19 ended: Open the door when the programme has ended. Set main switch 1 to OFF . Turn the water tap of f. (Does not apply when Aqua-Stop unit has been fitted) Remove dishes, etc. when they have cooled down. Interrupting the programme Open the door . Caution! There is a risk of water squirting out from inside the appliance. Do not open the door f ...
-
Siemens SF 25T053 - page 20
en 20 Changing the programme It is possible to change the programme within 2 minutes after you have switched the dishwasher on. Should it be necessary to change the programme after this period, the programme cycle that has already been begun (e.g. washing) will be completed first of all. The new remaining time displayed is the sum of the remaining ...
-
Siemens SF 25T053 - page 21
en 21 Filters The filters 25 prevent large particles of food in the water from reaching the pump. These particles may occasionally block the filters. When the appliance has finished washing, check the filters for particles of food and, if required, clean. After undoing the coarse micro-filter , the filter unit can be removed. Remove any particles o ...
-
Siemens SF 25T053 - page 22
en 22 Fault finding Resolving minor problems yourself Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having to call out a service engineer . Not only does this save costs, but it also means that the appliance is available for use again that much sooner . The following list of common oc ...
-
Siemens SF 25T053 - page 23
en 23 W ater remains inside appliance after programme has ended Blockage or kink in drainage hose. Pump is jammed. Filters are blocked. The programme is still running. W ait for the programme to end (numerical display will indicate 0). Perform “Reset” function. ... during washing Unusual amount of foam is created Normal washing up liquid has be ...
-
Siemens SF 25T053 - page 24
en 24 Dishes, cutlery , etc. have not been dried Selected programme did not include drying function. Amount of rinse-aid was set too low . Items were removed from dishwasher too soon. Glasses have a dull appearance Amount of rinse-aid was set too low . T ea stains or traces of lipstick have not been completely removed Detergent does not have a suff ...
-
Siemens SF 25T053 - page 25
en 25 Information Disposal Old appliances are not worthless rubbish. V aluable raw materials can be reclaimed by recycling old appliances. Pull out the mains plug of the redundant appliance. Cut off the power cord and discard with mains plug. T o prevent children from locking themselves in the appliance and suffocating, destroy the door lock and ch ...
-
Siemens SF 25T053 - page 26
en 26 Installation The dishwasher must be connected by a qualified technician to ensure correct operation. The specifications for supply , drainage and connected load must fulfil the required criteria as stated in the following paragraphs or in the installation instructions. Install the appliance in the following sequence: – Check the delivery ? ...
-
Siemens SF 25T053 - page 27
en 27 T ransporting the dishwasher Drain water from the dishwasher . Secure all loose parts. The appliance should only be transported in an upright position. If the appliance is not kept upright during transport, any water left inside may seep into the control module and cause subsequent errors with programme functions. The appliance must be draine ...
-
Siemens SF 25T053 - page 28
en 28 en Subjekt to modification ...
-
Siemens SF 25T053 - page 29
...
-
Siemens SF 25T053 - page 30
? ...
Avez-vous une question à propos de Siemens SF 25T053?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Siemens SF 25T053, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Siemens SF 25T053 il est probable qu’il a envie de partager la façon de le résoudre.