Français dropdown-ico

Manuel d’utilisation NEC MultiSync X461UN

39 pages 2.53 mb
Télécharger

Aller à la page of 39

Summary
  • NEC MultiSync X461UN - page 1

    User ’ s Manual MultiSync X461UN ...

  • NEC MultiSync X461UN - page 2

    Index Declaration of conformity ...................................................................................................... ....................... English-1 Important Information .......................................................................................................... ......................... English-2 W ARNING, CAUTIO ...

  • NEC MultiSync X461UN - page 3

    English-1 English For USA FCC Information 1. Use the attached specified cables with the MultiSync X461UN (L468TP) color display so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance. (2) Please use a good quality shielded video signal cable. Use of other cables and ...

  • NEC MultiSync X461UN - page 4

    English-2 Important Information TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSIDE. REFER SERVICING TO ...

  • NEC MultiSync X461UN - page 5

    English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not s ...

  • NEC MultiSync X461UN - page 6

    English-4 Contents Power Cord* 1 Setup Manual Remote control cable Clamp x 3 Y our new MultiSync monitor box* should contain the following: • LCD monitor • Power cord* 1 •V ideo Signal Cable • Remote control cable • Setup Manual • Cable cover • Clamp x 3 • Screw (black) for cable cover (M4 x 8) x 6 • Screw (silver) for clamp (M4 x ...

  • NEC MultiSync X461UN - page 7

    English-5 English This device cannot be used or installed without the T abletop Stand or other mounting accessor y f or suppor t. For proper installation it is strongly recommended to use a trained, NEC authorized service person. F ailure to follow NEC standard mounting procedures could result in damage to the equipment or injury to the user or ins ...

  • NEC MultiSync X461UN - page 8

    English-6 Attaching Mounting Accessories The display is designed for use with the VESA mounting system. 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attaching accessories. Mounting accessories can be attached with the monitor in the face down position. T o avoid damaging the screen face, place the protective sheet on the ...

  • NEC MultiSync X461UN - page 9

    English-7 English DOWN button Activates the OSD menu when the OSD menu is turned-off. Acts as button to move the highlighted area down to select adjustment items within OSD menu. EXIT button Activates the OSD menu when the OSD menu is turned-off. Acts as EXIT button within the OSD to move to previous menu. Remote control sensor and Power Indicator ...

  • NEC MultiSync X461UN - page 10

    English-8 T erminal Panel VIDEO IN connector (BNC and RCA) To input a composite video signal. BNC and RCA connectors are not available at the same time (Use only one input). VIDEO OUT connector (BNC) To output the composite video signal from the VIDEO IN connector . DVD/HD connector (RCA) Connecting equipment such as a DVD player , HDTV device, or ...

  • NEC MultiSync X461UN - page 11

    English-9 English Kensington Lock For security and theft prevention. Remote control sensor Receives the signal from the remote control. AMBIENT LIGHT SENSOR Detects the level of ambient light, allowing the monitor to make adjustments to various settings, resulting in a more comfortable viewing experience. Do not cover this sensor . See page 18. Opt ...

  • NEC MultiSync X461UN - page 12

    English-10 POWER button Switches the power on/standby . INPUT button Selects input signal. DVI: DVI VGA: VGA RGB/HV : RGB/HV OPTION: Depend on your connection HDMI: HDMI DVD/HD: DVD/HD1, DVD/HD2, SCART VIDEO: VIDEO1, VIDEO2 S-VIDEO: S-VIDEO PICTURE MODE button Selects picture mode, [HIGHBRIGHT], [ST ANDARD], [sRGB], [CINEMA], [AMBIENT1], [AMBIENT2] ...

  • NEC MultiSync X461UN - page 13

    English-11 English Operating Range for the Option Remote Control Point the top of the remote control toward the sensor unit’s remote control sensor in optional control kit during button operation. Use the remote control within a distance of about 7 m (23 ft.) from remote control sensor or at a horizontal and vertical angle of within 30° within a ...

  • NEC MultiSync X461UN - page 14

    English-12 1. Determine the installation location CAUTION: Installing your LCD display must be done by a qualified technician. Contact your dealer for more information. CAUTION: MOVING OR INST ALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls. CAUTION: Do not moun ...

  • NEC MultiSync X461UN - page 15

    English-13 English 6. Switch on the power of all the attached external equipment When connected with a computer , switch on the power of the computer first. 7. Operate the attached external equipment Display the signal from the desired input source. 8. Adjust the sound Make volume adjustments when required. 9. Adjust the screen (See pages 20 and 21 ...

  • NEC MultiSync X461UN - page 16

    English-14 Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. W iring Diagram Connecting terminal DVD/HD1 (3RCA) DVI-D HDMI DVD/HD+VIDEO VIDEO1 (BNC&RCA) S-VIDEO VIDEO2 (5BNC) DVD/HD2 (5BNC) VGA DVI-D BNC ...

  • NEC MultiSync X461UN - page 17

    English-15 English Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards and a pixel clock over 162MHz may not display an image correctly . Y our LCD monitor displays proper image by adjusting the factory preset timing signal automatically . <Factor ...

  • NEC MultiSync X461UN - page 18

    English-16 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered of f. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD. Power Button Main Power Switch ...

  • NEC MultiSync X461UN - page 19

    English-17 English NORMAL: Displays the aspect ratio the same as it is sent from the source. FULL: Fills entire screen. WIDE: Expands a 16:9 letter box signal to fill entire screen. ZOOM (DYNAMIC): Expands a 4:3 pictures to fill the entire screen with non-linearity . Some of the outside image area will be cut off due to expansion. ZOOM The image ca ...

  • NEC MultiSync X461UN - page 20

    English-18 BRIGHTNESS level set for the monitor to use when ambient lighting level is low . BRIGHTNESS level set for the monitor to use when ambient lighting level is high. BRIGHTNESS range IN DARK: BRIGHTNESS level set for the monitor to use when ambient lighting level is high. IN BRIGHT : BRIGHTNESS level set for the monitor to use when ambient l ...

  • NEC MultiSync X461UN - page 21

    English-19 English OSD (On-Screen-Display) Controls Press UP or DOWN button to select sub-menu. Press SET . Press UP or DOWN, PLUS or MINUS to select the function or setting to be adjusted. Press MENU or EXIT . Remote Control Press UP or DOWN button to select. Press INPUT button to decide. Press UP or DOWN, PLUS or MINUS button to select. Press EXI ...

  • NEC MultiSync X461UN - page 22

    English-20 Setting Default BRIGHTNESS Adjusts the overall image and background brightness. Press + or - to adjust. 70 Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot changed. CONTRAST Adjusts the image brightness in relationship to the background. Press + or - to adjust. 50 Note: The sRGB picture mode is standard a ...

  • NEC MultiSync X461UN - page 23

    English-21 English H RESOLUTION Adjusts the horizontal size of the image. - DVI, VGA, RGB/HV inputs only V RESOLUTION Adjusts the vertical size of the image. - DVI, VGA, RGB/HV inputs only INPUT RESOLUTION If there is a problem with signal detection, this function forces the monitor to display the AUTO VGA, RGB/HV inputs only signal at the desired ...

  • NEC MultiSync X461UN - page 24

    English-22 SCHEDULE RESET Resets the following settings within the SCHEDULE menu back to factory setting: - OFF TIMER, SCHEDULE SETTINGS. KEEP PIP MODE Allows the monitor to remain in “PIP” and “TEXT TICKER” mode after powering off. OFF When Power is returned, PIP and TEXT TICKER appear without having to enter the OSD. PIP MODE Picture-in-P ...

  • NEC MultiSync X461UN - page 25

    English-23 English OSD TRANSP ARENCY Set the transparency level of the OSD. TYPE2 OFF TYPE1 TYPE2 OSD ROT A TION Determines the OSD display direction between landscape and portrait. LANDSCAPE LANDSCAPE Display the OSD with landscape mode. PORTRAIT Display the OSD with portrait mode. INPUT NAME Y ou can set currently displayed INPUT name as you like ...

  • NEC MultiSync X461UN - page 26

    English-24 POWER SA VE Sets how long the monitor waits to go into power save mode after a lost signal. ON All inputs except for TV* Note: When connecting DVI, video card might not stop sending digital data even if image has disappeared. In this case the monitor does not get to power management mode. ST ANDBY MODE Lowers power consumption. ST ANDBY ...

  • NEC MultiSync X461UN - page 27

    English-25 English GAIN Adjusts gain value. 0 OFFSET Adjusts slice level of synchronized signal. 0 SYNC TERMINA TE Selects the terminate resistance for matching the cable impedance. HIGH RGB/HV inputs only TERMINAL SETTING DVI MODE Selects the kind of DVI-D equipment which is connected DVI. Select “DVI-PC” when PC or DVI-PC other computer equip ...

  • NEC MultiSync X461UN - page 28

    English-26 NOTE 1: CREA TING A SCHEDULE The schedule function allows the display to be set to power on and off at dif ferent times. Up to seven different schedules can be programmed. To program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons. Press the SET or the + button to enter th e Settings me ...

  • NEC MultiSync X461UN - page 29

    English-27 English REMOTE CONTROL ID FUNCTION REMOTE CONTROL ID The optional remote control can be used to control up to 100 individual MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors. For example: if ...

  • NEC MultiSync X461UN - page 30

    English-28 3. Press the “DISPLA Y” button on the remote control while aiming at the “PRIMARY” monitor . The Information OSD will be shown at top left side of the screen. Monitor ID: Displays the ID number of the current monitor within the daisy chain. T arget ID: Displays the ID number of the monitor that to be controlled via daisy chain fr ...

  • NEC MultiSync X461UN - page 31

    English-29 English This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C”. Functions that can be controlled by a personal computer are: • Power ON or OFF • Switching between input signals Connection LCD Monitor + PC NOTE: If your PC ...

  • NEC MultiSync X461UN - page 32

    English-30 Connecting to a Network Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. NOTE: When you use this function, EXTERNAL CONTROL should be “LAN”. To use a LAN connection, you are required to assign an IP address. Example of LAN connection: Controlling the LCD monito ...

  • NEC MultiSync X461UN - page 33

    English-31 English Preparation Before Use Connect the monitor to a commercially available LAN cable before engaging in browser operations. Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor , it is possible that items ...

  • NEC MultiSync X461UN - page 34

    English-32 Alert Mail Setting http://<the Monitor ’s IP address>/lanconfig.html T ype in the hostname of the network connected to the monitor . Up to 60 alphanumeric characters can be used. T ype in the domain name of the network connected to the monitor . Up to 60 alphanumeric characters can be used. Checking [ENABLE] will turn on the Aler ...

  • NEC MultiSync X461UN - page 35

    English-33 English Ultra Narrow Bezel: Provides the optimum solution in a tiling environment. Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to ...

  • NEC MultiSync X461UN - page 36

    English-34 No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. ...

  • NEC MultiSync X461UN - page 37

    English-35 English Specifications Product Specifications LCD Module 46" /1 16.8 cm diagonal Pixel Pitch: 0.746 mm Resolution: 1366 x 768 dots Color: Over 16 million colors (depending on video card used) Brightness: 700 cd/m 2 (Max.), 500 cd/m 2 (T yp.) Contrast Ratio: 3000:1 V iewing Angle: 89° (typ) @ CR>10 Design View Distance: 1300 mm F ...

  • NEC MultiSync X461UN - page 38

    English-36 1) Analog RGB input (MiniDsub15p): VGA Pin No Name 1V ideo Signal Red 2V ideo Signal Green 3V ideo Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 2) S-VIDEO input: VIDEO Pin No Name 1 GND 2 GND 3Y (Luminance) 4C (Chroma) 3) Digital RGB input (DVI-D): DVI 4) RS-232C input/output Pin No Name 1 connected to 7&8 2 RXD 3 TXD ...

  • NEC MultiSync X461UN - page 39

    English-37 English NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent ...

Fabricant NEC Catégorie Flat Panel Television

Les documents que nous recevons du fabricant de l'appareilNEC MultiSync X461UN peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques NEC
- manuels d’utilisations MultiSync X461UN
- fiches produit NEC
- dépliants
- ou étiquettes-énergie NEC MultiSync X461UN
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation NEC MultiSync X461UN.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation NEC MultiSync X461UN, manuels d’entretien, brefs manuels ou manuels de l’utilisateur NEC MultiSync X461UN. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit NEC MultiSync X461UN.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil NEC MultiSync X461UN, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser NEC MultiSync X461UN par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs NEC MultiSync X461UN.

Le manuel d’utilisation complet NEC, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel NEC MultiSync X461UN - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières NEC MultiSync X461UN, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lNEC MultiSync X461UN qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil NEC MultiSync X461UN - qui devraient nous aider dans les premières étapes lors de l'utilisation NEC MultiSync X461UN
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de NEC MultiSync X461UN
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service NEC MultiSync X461UN dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de NEC MultiSync X461UN?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec NEC MultiSync X461UN, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec NEC MultiSync X461UN il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)