-
ATEN Technology KH1508Ai - page 1
www.aten.com Cat 5 High-Density KVM Over the NET™ KH1508Ai / KH1516Ai User Manual ...
-
ATEN Technology KH1508Ai - page 2
KH1508 A i / KH1516 A i User Manual ii FCC, CE Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found t o comply with the limits for a Class A dig ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the ...
-
ATEN Technology KH1508Ai - page 3
KH1508 A i / KH1516 A i User Manual iii User Information Online Registration Be sure to register your product at our online support center: T elephone Suppo rt For telephone support, call this number: User Notice All information, docum entation, and specifications contained in this manual are subject to change without prior no tification by the man ...
-
ATEN Technology KH1508Ai - page 4
KH1508 A i / KH1516 A i User Manual iv Package Content s The KH1508 A i / KH1516 A i package consists of: 1 KH1508 A i or KH1516 A i Cat 5 High-D ensity KVM Over the NET™ Switch 1 Firmware Upgrade Cable 1 Laptop USB Cable 1P o w e r C o r d 1 Mounting Kit 1 Foot P ad Set (4 pcs .) 1 User Instruction s* Check to make sure that all of the co mponen ...
-
ATEN Technology KH1508Ai - page 5
KH1508 A i / KH1516 A i User Manual v Content s FCC, CE Inform ation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii SJ/T 11364-2006. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
ATEN Technology KH1508Ai - page 6
KH1508 A i / KH1516 A i User Manual vi Chapter 3. Basic Operation Port Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 OSD / GUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
ATEN Technology KH1508Ai - page 7
KH1508 A i / KH1516 A i User Manual vii Windows Client AP Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 The Windows Client AP Connection Screen . . . . . . . . . . . . . . . . . . . 53 Connecting – Windows Client AP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Java Client AP Login . . . . . . . . ...
-
ATEN Technology KH1508Ai - page 8
KH1508 A i / KH1516 A i User Manual viii Chapter 8. User Management Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Browser GUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 AP GUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
ATEN Technology KH1508Ai - page 9
KH1508 A i / KH1516 A i User Manual ix Chapter 12. Download Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Chapter 13. Port Operation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Connecting to a Port . . . . . . . . . . ...
-
ATEN Technology KH1508Ai - page 10
KH1508 A i / KH1516 A i User Manual x Additional Mouse Synchronizati on Procedures . . . . . . . . . . . . . . . . 171 IP Address Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 The Local Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 IP Installer . . . . . . . . . . . ...
-
ATEN Technology KH1508Ai - page 11
KH1508 A i / KH1516 A i User Manual xi About This Manual This User Manual is provided to help you get the most from you r KH1508 A i / KH1516 A i system. An overview of the informat ion found in the manual is provided below. Chapter 1, Introduction , introduces you to the KH1508 A i / KH1516 A i system. Its purpose, features and b enefits are prese ...
-
ATEN Technology KH1508Ai - page 12
KH1508 A i / KH1516 A i User Manual xii Chapter 13, Port Operation , provides detailed information on accessing and operating the devices connected to the KH150 8 A i / KH1516 A i’s ports. Chapter 14, The Log Server , explains how to inst all and configure the Log Server. An Appendix, provides specifications and other technical information regard ...
-
ATEN Technology KH1508Ai - page 13
1 Chapter 1 Introduction Overview The KH1508 A i / KH1516 A i KVM Over the NET™ switches are control units that allow access to multiple comput ers from a single KVM (keyboard, monitor, and mouse) consol e. A single KH1508 A i / KH151 6 A i can control up to 8 / 16 computers. As many as 15 additional KVM switches can be dais y chained from the or ...
-
ATEN Technology KH1508Ai - page 14
KH1508 A i / KH1516 A i User Manual 2 For local access, the KH1508 A i / KH1516 A i supports resolutions of 1600x1200@60Hz fo r an extended distance of up to 40 m, as well as 1280x1024@75Hz fo r an extended distance of 50 m. For remote access, the switches support up to 1280x1024@ 75Hz. The switches feature RJ-4 5 connectors and Cat 5e/6 cable to l ...
-
ATEN Technology KH1508Ai - page 15
Chapter 1. Introduction 3 Features Hardware Dedicated USB port directly connect s to a laptop for easy console operation High port density – RJ-45 connectors for up to 16 ports in a 1U housing One bus for remote KVM over IP access Supports PS/2, USB, Sun Legacy (13W3) and serial (RS-232) connectivity Local console provides PS/ ...
-
ATEN Technology KH1508Ai - page 16
KH1508 A i / KH1516 A i User Manual 4 Multibrowser support (IE, Mozilla, Firefox, Safari, Opera, Netscape) Browser-based UI in pure W eb technology allows admini strators to perform administrative tasks without the need for Java to be pre-installed User can launch multiple V irtual Remote Desktops to control multiple connected servers f ...
-
ATEN Technology KH1508Ai - page 17
Chapter 1. Introduction 5 Requirement s General W e recommend computers with at least a P 4 2 GHz processor , with 1G of memory , with their screen resolu tion set to 1024 x 768. Browsers must support 128 bit SSL en cryption. For the Log Server , you must have the Micros oft Jet OLEDB 4. 0 or higher driver installed. Console A VGA, ...
-
ATEN Technology KH1508Ai - page 18
KH1508 A i / KH1516 A i User Manual 6 KVM Adapter Cables Cat 5e/6 cable is required to connect the KH1508 A i / KH1516 A i to one of the KVM adapter ca bles. The following KVM adapter cables are required for use with the KH1508 A i / KH1516 A i: Note: 1. KVM adapter cables are referred to as I/O Modules in some dialog boxes. 2. The followin ...
-
ATEN Technology KH1508Ai - page 19
Chapter 1. Introduction 7 Component s Front View KH1508 A i KH1516 A i 1 & 2 4 3 5 68 7 1 & 2 4 3 5 68 7 ...
-
ATEN Technology KH1508Ai - page 20
KH1508 A i / KH1516 A i User Manual 8 No. Component Description 1P o r t S e l e c t i o n Pushbutto ns Press a pushbut ton to give the KV M focus to the co mputer attached to i ts correspond ing port. Simultaneously pre ssing pushbut tons 1 and 2 for 3 se conds performs a Keyb oard and Mouse Reset . Simulta neously pr essing pus hbutto ...
-
ATEN Technology KH1508Ai - page 21
Chapter 1. Introduction 9 Rear View KH1508 A i KH1516 A i 12 34 5 7 6 8 12 34 5 7 6 8 ...
-
ATEN Technology KH1508Ai - page 22
KH1508 A i / KH1516 A i User Manual 10 No. Component Description 1 Power Socket The AC power cord plugs in here. 2 Power Switch This rocker switch powers the unit on and off. 3 LAN Port The cable that connects the KH1508 A i / KH1516 A i to the Internet plugs in here. The LEDs indicate data transmission speed: ORANGE for 10 Mbps; GREEN for 100 Mbps ...
-
ATEN Technology KH1508Ai - page 23
11 Chapter 2 Hardware Setup Overview For convenience and flexibili ty that allows mixing the PS/ 2, USB, and serial device interfaces, as well as mu ltiple platforms, the KH1508 A i / KH1516 A i's design utilizes KVM A dapter Cables (CPU Modules), that serve as intermediaries between the switch and the connected devices (refer to the installat ...
-
ATEN Technology KH1508Ai - page 24
KH1508 A i / KH1516 A i User Manual 12 St acking and Rack Mounting The KH1508 A i / KH1516 A i can be stacked on the de sktop or rack mounted at the front or rear of the rack. The following sections take you through the procedures for each method. St acking The KH1508 A i / KH1516 A i can be placed on any appropriate level surface that can safely s ...
-
ATEN Technology KH1508Ai - page 25
Chapter 2. Hardware Setup 13 Rack Mounting The KH1508 A i / KH1516 A i can be mounted in a 19" (1U) racks. The m ounting brackets can screw into either the front or the back of the unit so that it can attach to the front or the back of the rack. To rack mount the unit: 1. Remove the screws at the front or t he rear , as shown in the diagram be ...
-
ATEN Technology KH1508Ai - page 26
KH1508 A i / KH1516 A i User Manual 14 Single St ation Inst allation In a single stage installation, there are no additional KVM switches daisy chained down from the KH1508 A i / KH1516 A i. To set up a single stage installation, refer to the i nstallation diagrams st arting on page 15. The numbers in the diagrams correspond with the numbers of the ...
-
ATEN Technology KH1508Ai - page 27
Chapter 2. Hardware Setup 15 Single S t age Inst allation Diagram 7 5 4 1 2 4 b y A TE N PS/ 2 CPU MODUL E M OD E L NO. KA9120 PS/ 2 CPU MODUL E M OD E L NO. KA9120 LIN K 2 6 3 ...
-
ATEN Technology KH1508Ai - page 28
KH1508 A i / KH1516 A i User Manual 16 KVM Adapter Cable Inst allation Diagrams KA7120 KA7520 KA7920 KA9120 KA9520 by A TEN LIN K KA7170 KA7570 KA7970 KA9170 KA9570 b y A TEN LIN K KA9140 SERIAL TERMINAL KA7130 KA9130 b y A TEN LIN K ...
-
ATEN Technology KH1508Ai - page 29
Chapter 2. Hardware Setup 17 KVM Adapter Cable Inst allation Diagrams cont. KA7166 KA7168 KA7169 ...
-
ATEN Technology KH1508Ai - page 30
KH1508 A i / KH1516 A i User Manual 18 Daisy Chaining To control even more co mputers, up to 15 additional KVM switches can be daisy chained from the original KH 1508 A i or KH1516 A i. As many as 256 computers can be controlled from a si ngle console in a complete inst allation. Note: Please see the table, Supported Devices , page 182, for a list ...
-
ATEN Technology KH1508Ai - page 31
Chapter 2. Hardware Setup 19 Daisy Chain Inst allation Diagram ...
-
ATEN Technology KH1508Ai - page 32
KH1508 A i / KH1516 A i User Manual 20 This Page Intentionally Left Blank ...
-
ATEN Technology KH1508Ai - page 33
21 Chapter 3 Basic Operation Port Selection KH1508 A i / KH1516 A i installatio ns provide three methods to obtain inst ant access to any computer in your installation: Manual, OSD, and Hotkey . Manual For manual po rt selection, simp ly press the Port Sw itch that corresponds to th e device you wish to access. OSD / GUI The KH1508 A i / KH1516 A i ...
-
ATEN Technology KH1508Ai - page 34
KH1508 A i / KH1516 A i User Manual 22 Hot Plugging The KH1508 A i / KH1516 A i supports hot pluggin g – components can be removed and added back into the instal lation by unplugging and rep lugging their cables from their port s without the n eed to shut the unit d own. In order for hot plugging to wo rk properly, however, the procedures d escri ...
-
ATEN Technology KH1508Ai - page 35
Chapter 3. Basic Operation 23 The Adapter ID Function Adapter Cable info rmation (the Adapter ID, port name, OS, keyboard language, and access mode), is stor ed on the adapter. The switch’s Adapter ID function takes this information and stor es it along with the adapter cable’s configuration information (access rights, etc.), in its database ? ...
-
ATEN Technology KH1508Ai - page 36
KH1508 A i / KH1516 A i User Manual 24 Powering Off and Rest arting If it becomes necessary to power off the KH1508 A i / KH1516 A i, or if the switch loses power and needs to be restarted , before starting it back up you must follow these procedures: 1. Shut down all the comput ers that are attached to it. Note: Y ou must unplug the power cords of ...
-
ATEN Technology KH1508Ai - page 37
25 Chapter 4 OSD Operation OSD Overview The On Screen Display (OSD) is a menu d riven method to han dle computer control and switchi ng operations. All pr ocedures start from the OSD Main Screen. To display the Main Sc reen, tap the OSD hotkey twice. The default hotkey is [Scrol l Lock]. You can change the hotkey to the Ctrl key or the Alt key if y ...
-
ATEN Technology KH1508Ai - page 38
KH1508 A i / KH1516 A i User Manual 26 When you invoke the OSD, a screen similar to the one below appears: Note: The diagram depicts the Administrator's Main Screen. The User Main Screen does not show the F4 and F6 functions, since these are reserved for the administrator and can't be accessed by ordinary users. ...
-
ATEN Technology KH1508Ai - page 39
Chapter 4. OSD Operation 27 OSD Navigation T o di smiss the menu, and d eactivate the OSD, click the X at the upper right corner of the OSD W indow or press Esc . T o Logo ut click F8 or the Z Z Z symbol at the top of the Main Screen, or press [F8] . The OSD uses a tree view . T o see the por ts for a particular station, click the plus ...
-
ATEN Technology KH1508Ai - page 40
KH1508 A i / KH1516 A i User Manual 28 OSD Functions OSD functions are used to configure an d control the OSD. For example, you can rapidly switch to any port, scan selected ports only , limit the list you wish to view, designate a port as a Quick View Port, create or edit a port name, or make OSD setting adjustments. To access an OSD function: 1. ...
-
ATEN Technology KH1508Ai - page 41
Chapter 4. OSD Operation 29 F2: LIST Many of the switch’s OSD functions only operate on the computers currentl y selected for listing on the Main Screen. Accessin g this function lets you broaden or narrow the scope of ports that get listed. The submenu choices and their meanings are given in the table below: Move the highligh t bar to the choice ...
-
ATEN Technology KH1508Ai - page 42
KH1508 A i / KH1516 A i User Manual 30 F3: SET Accessing this function allows the admini strator and each user to set up an individual working environm ent. A separate profile fo r each operator is stored by the OSD and is activated according to the username provided during login. To change a setting: 1. Double-click it; or move the hi ghlight bar ...
-
ATEN Technology KH1508Ai - page 43
Chapter 4. OSD Operation 31 SCAN/SKIP MODE Selects which computers will be accessed under Skip mode (see F5: SKP , p age 35), and Auto Scan mode (see F7: SCAN , page 37). Choices are: ALL – All the ports which have been set Accessible; QUICK VIEW – Only those ports which have been set Accessible and have been selected as Quick View Ports (see S ...
-
ATEN Technology KH1508Ai - page 44
KH1508 A i / KH1516 A i User Manual 32 SET QUICK VIEW PORTS This function lets the administrator select which ports to include as Quick View ports. T o select/deselect a port as a Qu ick View Port, use the navigation keys to move the highlight bar to it, then press the [S pacebar]. When a port has been selected as a Quick View Port, an arr ...
-
ATEN Technology KH1508Ai - page 45
Chapter 4. OSD Operation 33 F4: ADM F4 is an administrator onl y function. Accessing this function allo ws the administrator to configure and contro l the overall operation of the OSD. To change a setting doubl e click it; or use the up and down arrow key s to move the highlight bar to it, then press [Enter] . After you select an item, a submenu wi ...
-
ATEN Technology KH1508Ai - page 46
KH1508 A i / KH1516 A i User Manual 34 RESET ST A TION IDS If you change the position of one of the stations in the daisy chain, the OSD settings will no longer correspond to the new situation. This function directs the OSD to rescan t he station positions of the entire installation and updates the OSD so that the OSD station information correspond ...
-
ATEN Technology KH1508Ai - page 47
Chapter 4. OSD Operation 35 F5: SKP This function enables you to easily skip backw ard or forward, switching the console focus from the cu rrently active KVM Port to the previous or next available one. The selection of computers to be av ailable for Skip mode switching is made with the Scan/Skip mode setti ng under the F3 SET function (see page ...
-
ATEN Technology KH1508Ai - page 48
KH1508 A i / KH1516 A i User Manual 36 F6: BRC F6 is an administrato r only function. When t his function is in effect, commands sent from the console are broadcas t to all available computers on the installation. This function is particu larly useful for operat ions that need to be performed on multiple comp uters, such as performing a system wide ...
-
ATEN Technology KH1508Ai - page 49
Chapter 4. OSD Operation 37 F7: SCAN This function automatically switches am ong the available computers at regular intervals so that you can monito r their activity witho ut having to take the trouble of switching m anually. The selection of computers to be included for Aut o Scanning is mad e with the Scan/Skip mode setting u nder the F3 SET ...
-
ATEN Technology KH1508Ai - page 50
KH1508 A i / KH1516 A i User Manual 38 F8: LOUT Clicking the F8 field, or pressing [F8] , logs you out of the OSD and blanks the console screen. This is different from simply deactivat ing the OSD when you are at the Main Screen by pressing [Esc]. With this function you must log in all over again to regain access to the OSD, whereas with [Esc], all ...
-
ATEN Technology KH1508Ai - page 51
Chapter 4. OSD Operation 39 Invoking Hotkey Mode All Hotkey operations begin by in voking Hotkey mode. 1 To invoke Hotkey mode you may use two possible k eystroke sequences shown below. On ly one of the two key-sequences below can be operational (see Setting the Hotkey key combination on page 45): Number Lock and Minus Keys 1. Hold down the [Num Lo ...
-
ATEN Technology KH1508Ai - page 52
KH1508 A i / KH1516 A i User Manual 40 Selecting the Active Port Each computer port is assigned a port ID (see Port ID Numbering , page 24). You can directly access any computer with a Hotkey co mbination that specifies the port ID that the computer is connected to. The steps are: 1. Enter th e Hotkey mo de with the: [Num Lock] + [-] or [Ctrl] + [F ...
-
ATEN Technology KH1508Ai - page 53
Chapter 4. OSD Operation 41 Auto Scan Mode Switching Auto Scan automati cally sw itches among all the active computer ports that are accessible to the currently logg ed on user at regular inte rvals. This allows their activity to be monito red automatically (See SCAN/SKIP MODE of the OSD F3 SET functio n, page 31). Setting the Scan Interval The amo ...
-
ATEN Technology KH1508Ai - page 54
KH1508 A i / KH1516 A i User Manual 42 (Continued from previous page.) When you want to keep the fo cus on a particular computer , Pausing is more convenient than exiting Auto Scan mode. When you resume scanning it starts at th e computer where you pa used. If you exited and then restarted Auto Scanning, it star ts, at the beginning, from the first ...
-
ATEN Technology KH1508Ai - page 55
Chapter 4. OSD Operation 43 Skip Mode Switching This feature allows you to switch betw een computers in orde r to monitor them manually. You can focus on a particular port for as long as you lik e – as opposed to auto-scanning, which au tomati cally switches the port focus after a fixed interval. Entering Skip Mode To enter Ski p mode, key in the ...
-
ATEN Technology KH1508Ai - page 56
KH1508 A i / KH1516 A i User Manual 44 Computer Keyboard / Mouse Reset If either the keyboard or mouse stop functi oning on the computer connected to the currently selected port, you can pe rform a keyboard / mouse reset on the computer by executing the follo wing steps: 1. Enter th e Hotkey mo de with the: [Num Lock] + [-] or [Ctrl] + [F12] combin ...
-
ATEN Technology KH1508Ai - page 57
Chapter 4. OSD Operation 45 Setting the Hotkey key co mbination The keys used to enter the Hotkey Mode (see HOTKEY COMMAND MODE , page 31) can be swi tched between: [Num Lock] + [-] , and [Ctrl] + [F12] by the following steps: 1. Enter the Hotkey mo de with the: [Num Lock] + [-] or [Ctrl] + [F12] combination . 2. Press [H] . After you press [H], th ...
-
ATEN Technology KH1508Ai - page 58
KH1508 A i / KH1516 A i User Manual 46 Setting the Port Operating System A port’s operating system configuration can b e matched to that of the computer attached to the port by performing the followin g steps: 1. Enter th e Hotkey mo de with the: [Num Lock] + [-] or [Ctrl] + [F12] combination . 2. Press a [Function ] key , where [Function] refers ...
-
ATEN Technology KH1508Ai - page 59
Chapter 4. OSD Operation 47 Hotkey Summary T able [Num Lock] + [-] or [Ctrl] + [F12] [A] [Enter] Invokes Auto Scan mode. When Auto Scan mode is in effect, [P] or left-click paus es auto-scanning. When auto-scanning is paused, pressing any key or another left-click resumes auto- scanning. [B] T oggles the Beeper On or Off. [Esc] or [S pacebar] Exits ...
-
ATEN Technology KH1508Ai - page 60
KH1508 A i / KH1516 A i User Manual 48 This Page Intentionally Left Blank ...
-
ATEN Technology KH1508Ai - page 61
49 Chapter 5 Logging In Overview The KH1508 A i / KH1516 A i can be accessed via its Graphical User Interface (GUI) locally from a Laptop application (AP) program; and remot ely from an internet browser; a Windows ap plication (AP) program; and a Java application (AP) program. No matter which access method you choose, the KH1508 A i / KH1516 A i sw ...
-
ATEN Technology KH1508Ai - page 62
KH1508 A i / KH1516 A i User Manual 50 Laptop USB Console Login The KH1508 A i / KH1516 A i can be accessed via a laptop USB console application (AP) program at the local site. This AP is built into the KH1508 A i / KH1516 A i’s firmware and does not requir e a download. To access the switch, do the following: 1. Use the Laptop USB Console cable ...
-
ATEN Technology KH1508Ai - page 63
Chapter 5. Logging In 51 Browser Login The KH1508 A i / KH1516 A i can be accessed via an Internet browser running on any platform. To access the switch, do the following: 1. Open the browser and specify the IP address of the switch you want to access in the browser's location bar . Note: 1. For security purposes, a login string may have been ...
-
ATEN Technology KH1508Ai - page 64
KH1508 A i / KH1516 A i User Manual 52 Windows Client AP Login The Windows AP Client allows direct remote access to Windows systems users, without havi ng to go through a browser (altho ugh you initially d ownload the Windows AP Client program from the browser page – see Chapter 12, Download ). To connect to the KH1508 A i / KH1516 A i, go to the ...
-
ATEN Technology KH1508Ai - page 65
Chapter 5. Logging In 53 The Windows Client AP Connection Screen A description of the Connecti on Screen is given in the following table: Item Description Server List Each time the WinClient.exe file is run, it searches the user's local LAN segment for KH1508 A i / KH1516 A i, and lists whichever ones it finds in this box. If you w ant to conn ...
-
ATEN Technology KH1508Ai - page 66
KH1508 A i / KH1516 A i User Manual 54 Connecting – Windows Client AP To connect to a KVM Over the NET™ switch do the following:: 1. From the Server List box, double-click the device that you wish to connect to. – Or – Specify its IP address an d port number in the Serv er IP and Port input boxes. 2. Click Connect . The Login dialog box app ...
-
ATEN Technology KH1508Ai - page 67
Chapter 5. Logging In 55 Java Client AP Login The Java AP Client provides direct remote access to non-Windows systems users (although you initially download the Java AP Client p rogram from the browser page – see Chapter 12, Download ). To connect to the KH1508 A i / KH1516 A i, go to the location on your hard disk th at you downloaded the Java A ...
-
ATEN Technology KH1508Ai - page 68
KH1508 A i / KH1516 A i User Manual 56 The Java Client AP Connection Screen A description of the Connectio n Screen is given in the following table: Item Description Server List Each time the JavaClient.jar file is run, it searches the User's local LAN segment for KH1508 A i / KH1516 A i, and lists whichever ones it finds in this box. If you w ...
-
ATEN Technology KH1508Ai - page 69
Chapter 5. Logging In 57 Connecting – Java Client AP To connect to a KVM Over the NET™ switch do the following : 1. From the Server List box, double-click the device that you wish to connect to. – Or – Specify its IP address and port number in the Server IP and Port input boxes. 2. Click Login The Login dialog box appears: 3. Key in a valid ...
-
ATEN Technology KH1508Ai - page 70
KH1508 A i / KH1516 A i User Manual 58 This Page Intentionally Left Blank ...
-
ATEN Technology KH1508Ai - page 71
59 Chapter 6 The User Interface Overview Once you have successfully logged in, the KH1508 A i / KH1516 A i user interface Main Page appears. The look of the page varies s lightly, depending on which method you used to log in. Each of the int erfaces is described in the sections that follow. The We b Browser Main Page T o ensure multi-platform op er ...
-
ATEN Technology KH1508Ai - page 72
KH1508 A i / KH1516 A i User Manual 60 Page Component s The web page screen components ar e described in the table, below: No. Item Description 1 T ab Bar The tab bar contains the KH1508 A i / KH1516 A i main operation categories. The items that appear in the tab bar are determined by the user’s type, and the authorization options that were selec ...
-
ATEN Technology KH1508Ai - page 73
Chapter 6. The User Interface 61 The T ab Bar The number and ty pe of icons that appear on the Tab Bar at the top of th e page are determined by the user’s type (Admin istrator or User) and the permissions assigned when the user’s account was cr eated. The functions associated with each of the icons are expl ained in the table below: There are ...
-
ATEN Technology KH1508Ai - page 74
KH1508 A i / KH1516 A i User Manual 62 Laptop USB Console Main Page After connecting a laptop to the KH1508 A i / KH1516 A i ’ s Laptop port, loggi ng in, and opening the AP , the Laptop USB Console main page appears: The look of the Laptop USB Console main page is the same as the AP GUI. See The AP GUI Main Page , page 63, for further details, a ...
-
ATEN Technology KH1508Ai - page 75
Chapter 6. The User Interface 63 The AP GUI Main Page With WinClient AP, and Java Client AP access, once users log in (see Logging In , page 49), the GUI Ma in Page comes up: The GUI Main Page is similar to that of the Web Browser. The differences between them are as follows: 1. The AP GUI version doesn’t have a menu bar below the tab bar; it has ...
-
ATEN Technology KH1508Ai - page 76
KH1508 A i / KH1516 A i User Manual 64 The Control Panel WinClient Control Panel Since the WinClient Control Panel contains the most complete fu nctionality, this section describes the WinClien t Control Panel. Although the Java Control Panel does not enable all of the features that this one does, the functions that they do share are the same, and ...
-
ATEN Technology KH1508Ai - page 77
Chapter 6. The User Interface 65 Right clicking in the text row area brings up a menu-style versi on of the toolbar . In addition, it allows you to select options for the Screen Mode , Zoom , Mouse Pointer type, and Mouse Sync Mode . These functions are discussed in the sections that follow. T o move the Control Panel to a diff erent locati ...
-
ATEN Technology KH1508Ai - page 78
KH1508 A i / KH1516 A i User Manual 66 WinClient Control Panel Functions The Control Panel functio ns are described in the table below. Icon Function This is a toggle. Click to make t he Control Panel persistent – i.e., it always displays on top of other sc reen elements. Click again to have it display normally . Click to bring up the Macros di a ...
-
ATEN Technology KH1508Ai - page 79
Chapter 6. The User Interface 67 Click to toggle Automatic or Manual mouse sync. When the selection is Automatic , a green √ appears on the icon. When the selection is Manual , a red X appears on the icon. See Mouse DynaSync Mode , page 86 for a complete explanation of this feature. Click to display a dropdown list of User macros in order ...
-
ATEN Technology KH1508Ai - page 80
KH1508 A i / KH1516 A i User Manual 68 Macros The Macros icon provides access to three functions found in the Macros dialog box: Hotk eys, User Macros, and System Macros. Each of these functio ns is described in the fol lowing sections. Hotkeys Various actions related to manipulating the remote server can be accomplished with hotkeys. The Hotkey Se ...
-
ATEN Technology KH1508Ai - page 81
Chapter 6. The User Interface 69 An explanation of the Hotkey actio ns is giv en in the table below: Actio n Explanation Exit Remote Location Breaks the connection to the KH1508 A i / KH1516 A i a nd returns you to local client computer operation. This is equivalent to clicking the Exit icon on the Control Panel. The default keys are F2, F3, F4. Ad ...
-
ATEN Technology KH1508Ai - page 82
KH1508 A i / KH1516 A i User Manual 70 User Macros User Macros are created to perform speci fic actions on the remote server. To create the macro, do the following: 1. Select User Macros , then click Add . 2. In the dialog box that comes up, re place the “New Macr o” text with a name of your choice for the macro: ...
-
ATEN Technology KH1508Ai - page 83
Chapter 6. The User Interface 71 3. Click Record . The dialog box disappears, and a small panel appears at the top left of the screen: 4. Press the keys for the macro. T o pause macro record ing, click Pause . T o resume, click Pause again. Clicking Show brings up a dialog box that lists each keystroke that you make, together with the am ou ...
-
ATEN Technology KH1508Ai - page 84
KH1508 A i / KH1516 A i User Manual 72 5. If you haven’t brought up the Show dialog, click Done when yo u have finished recording your macro. Y ou return to the Macros dialog box with your macro key presses displayed in the Macro column: 6. If you want to change any of the keystrokes, select the macro and click Edit . This brings up a dialog box ...
-
ATEN Technology KH1508Ai - page 85
Chapter 6. The User Interface 73 After creating your macros, you can ru n them in any of three ways: 1. By using the hotkey (if one was assigned). 2. By opening the Macro List on the Control Panel and clicking the one you want (see page 67) . 3. By opening this (Macros) dialog bo x and clicking Play . If you run the macro from this dialog box, you ...
-
ATEN Technology KH1508Ai - page 86
KH1508 A i / KH1516 A i User Manual 74 Search Search, at the bottom of the dialo g box, le ts you filter the list of macros that appear in the large upper pan el for you to play or edit. Click a radio button to choose whether you want to search by name or by key; key in a string for the search; then click Sear ch . All instances that match you ...
-
ATEN Technology KH1508Ai - page 87
Chapter 6. The User Interface 75 3. Click Record . The dialog box disappears, and a small panel appears at the top left of the screen: 4. Press the keys for the macro. T o pause macro record ing, click Pause . T o resume, click Pause again. Clicking Show brings up a dialog box that lists each keystroke that you make, together with the amoun ...
-
ATEN Technology KH1508Ai - page 88
KH1508 A i / KH1516 A i User Manual 76 7. If you want to change any of the keystrokes, select the macro and click Edit . This brings up a dialog box similar to the one for Show . Y ou can change the content of your keystr okes, change thei r order , etc. 8. Repeat the procedure for any oth er macros you wish to create. Once the system macros have b ...
-
ATEN Technology KH1508Ai - page 89
Chapter 6. The User Interface 77 Video Settings Clicking the Hammer icon on the Control Panel brings up the Video Settings dialog box. The opt ions in this dialog box all ow you to adjust the placement and picture quality of th e remote screen on your monitor: The meanings of the video adju stment options are given in the table below: Options Usage ...
-
ATEN Technology KH1508Ai - page 90
KH1508 A i / KH1516 A i User Manual 78 RGB Drag the slider bars to adjust the RGB (Red, Green, Blue) values. When an RGB value is increased, the RGB component of the image is correspondingly increased. If you enable Set to Grayscale , the remote video display is changed to grayscale. Gamma This section allows you to adjust the video display's ...
-
ATEN Technology KH1508Ai - page 91
Chapter 6. The User Interface 79 Gamma Adjustment If it is necessary to correct the gamma level for the remote video display, use the Gamma function of the Video Adjustm ent dialog box. Under Basic configuration, there are ten pres et and four user -defined levels to choose from. Dr op down the list box and choose the most suitable one. For ...
-
ATEN Technology KH1508Ai - page 92
KH1508 A i / KH1516 A i User Manual 80 The Message Board The KH1508 A i / KH1516 A i supports multiple u ser logins, which m ay cause access conflicts. To alleviat e the problem, a message board has been provided, which a llows users to communicate with each other: Button Bar The buttons on the Button Bar are toggles. Their actions are described in ...
-
ATEN Technology KH1508Ai - page 93
Chapter 6. The User Interface 81 Message Display Panel Messages that users post to the board - as well as system messages - display in this panel. If you disable Ch at, however, messages that get posted to the board won't appear. Compose Panel Key in the messages that you want to post to the board in thi s panel. Click Send , or press [ Enter ...
-
ATEN Technology KH1508Ai - page 94
KH1508 A i / KH1516 A i User Manual 82 Zoom The Zoom icon controls the zoom factor for t he remote view window. Settings are as follows: Setting Description 100% Sizes and displays the remote view window at 100%. 75% Sizes and displays the remote view window at 75%. 50% Sizes and displays the remote view window at 50%. 25% Sizes and displays the re ...
-
ATEN Technology KH1508Ai - page 95
Chapter 6. The User Interface 83 The On-Screen Keyboard The KVM Over the NET™ switch su pports an on-screen keyboard, available in multiple languages, with all the standard keys for each supported language . Click this icon to pop up the on-screen keyboard : One of the major advantages of the on-screen keyboard is that if the keyboard languages o ...
-
ATEN Technology KH1508Ai - page 96
KH1508 A i / KH1516 A i User Manual 84 Exp anded Keyboard To display/hide the expan ded keyboard keys, click the arrow to the right of the language list arrow. ...
-
ATEN Technology KH1508Ai - page 97
Chapter 6. The User Interface 85 Mouse Pointer T ype KVM Over the NET™ switches of fer a number of mouse pointer options when working in the remot e display. Click this icon to select from the ava ilable choices: Note: 1. Before acces sing a port, only Dual and Crosshairs are available for the Windows Viewers. Once the port is accessed, all four ...
-
ATEN Technology KH1508Ai - page 98
KH1508 A i / KH1516 A i User Manual 86 Mouse DynaSync Mode Synchronization of the local and rem ote mouse pointers is accomplished either automatically or manually. Automatic Mouse Synchron ization (DynaSync) Mouse DynaSync provides automatic locked-in synching of the remote and local mouse pointers – eliminating the need to constantly resync the ...
-
ATEN Technology KH1508Ai - page 99
Chapter 6. The User Interface 87 Mac and Linux Considerat ions For Mac OS versi ons 10.4. 1 1 and hi gher , there is a second DynaSync setting to choose from. If the default Mouse DynaSync result is not satisfactory , try the Mac 2 setting. T o select Mac 2, right click in the text area of the Control Panel and select Mouse Sync Mode → Automa ...
-
ATEN Technology KH1508Ai - page 100
KH1508 A i / KH1516 A i User Manual 88 Control Panel Configura tion Clicking the Control Panel icon brings up a dial og box that allows you to configure the items that appear on the Control Panel, as well as its graphical settings: The organization of the di alog box is described in the table, below: Item Description Custom ize Control Panel Allows ...
-
ATEN Technology KH1508Ai - page 101
Chapter 6. The User Interface 89 Screen Options If Full Screen Mode is enabled, the remote display fills th e entire screen. If Full Screen Mode is not enabled, the remote display appe ars as a window on the local desktop. If the remote screen is larg er than what is able to fit in the window, move the mouse pointer to the screen border tha ...
-
ATEN Technology KH1508Ai - page 102
KH1508 A i / KH1516 A i User Manual 90 The Java Control Panel The Java Client AP Co ntrol Panel is simi lar to the one used by the WinClient: The major differences between them are: In the Macros dialog box, Toggle Mouse Display is not available. The Dot mouse pointer type is not available. In the Message Board, there is no Show/Hide bu ...
-
ATEN Technology KH1508Ai - page 103
91 Chapter 7 Port Access Overview When you log in to the switch the Port Access page comes up with the KH1508 A i / KH1516 A i’s KVM Connections page displayed. Browser GUI AP GUI ...
-
ATEN Technology KH1508Ai - page 104
KH1508 A i / KH1516 A i User Manual 92 The Connections page i s organized into several m ain areas. All the devices and ports that a user is permitted to access are listed in the Sidebar at the left of the page. After selecting a device or port in the Sidebar, clicking entries on the menu bar (Browser GUI) or tab bar (AP GUI) opens information and ...
-
ATEN Technology KH1508Ai - page 105
Chapter 7. Port Access 93 The Sidebar All KVM switches are listed in a tree struct ure in the Sidebar at the left of the screen: The Sidebar T ree S tructure Users are only allowed to see the devi ces and ports that they have access permission for . Ports and child devices can be ne sted under their parent devices. Click the + in front of a ...
-
ATEN Technology KH1508Ai - page 106
KH1508 A i / KH1516 A i User Manual 94 View Filter At the bottom of the sidebar are the viewing filter opt ions which allow you to control the number and type of ports that display in the Sidebar: The meanings of the choices are explained in the following table: Choices Explanation ALL Lists all of the ports on the inst allation. QUICK VIEW Lists o ...
-
ATEN Technology KH1508Ai - page 107
Chapter 7. Port Access 95 Connections For the KH1508 A i / KH1516 A i, the Connections page displays port status information at the device level, and port connection configuratio n options at the port level. Device Level When a KH1508 A i / KH1516 A i is selected in the Si debar, the Connections page displays a list of ports for the devi ce that th ...
-
ATEN Technology KH1508Ai - page 108
KH1508 A i / KH1516 A i User Manual 96 Port Level When a port is selected in the Sidebar, the Connections page displays port connection configur ation properties: This page allows yo u to view the p o rt’s current configuration only. See Port Configuration , page 129, for full deta ils about the properties and how to configure then. Click the Con ...
-
ATEN Technology KH1508Ai - page 109
Chapter 7. Port Access 97 User Preferences The User Preferences page allows users to set up their own, individual, working environments. The switch stores a separate configuration record for each user profile, and sets up the wo rking configuratio n according to the Username that was key ed into the Lo gin dialog box: The page settings are explai n ...
-
ATEN Technology KH1508Ai - page 110
KH1508 A i / KH1516 A i User Manual 98 * This item is only available with the B rowser version. ID Duration Determines how long a Port ID displays on the monitor after a port change has taken place. Y ou can choose an amount fr om 1—255 seconds. The default is 3 Seconds . A setting of 0 (zero) means the Port ID is always on. Scan Duration Deter m ...
-
ATEN Technology KH1508Ai - page 111
Chapter 7. Port Access 99 Sessions The Session page lets the administrator and users with User Management permissions see at a glance which us ers are currently logged into the KH1508 A i / KH1516 A i, and provides information about each of their sessions. Note: 1. The Session page isn’t availabl e for ordinary users. 2. Users with User Managemen ...
-
ATEN Technology KH1508Ai - page 112
KH1508 A i / KH1516 A i User Manual 100 Access Right s Administrato rs use the Access Rights page to set user access and configuration rights for ports. Note: The Access page only appears for those users with User Management permissions. It isn’ t av ailable for other users. Browser GUI Interface If a port is chosen in the Sidebar, the Main panel ...
-
ATEN Technology KH1508Ai - page 113
Chapter 7. Port Access 101 AP GUI Interface The AP GUI Access Rights page is sim ilar to the Browser GUI version (see above), except that there is no ch eckmark icon in the Access column. Click the text in the Access column to toggle perm ission between Full Access, V iew Only , and No Access. Saving Changes Click the Save butt on at the lower ...
-
ATEN Technology KH1508Ai - page 114
KH1508 A i / KH1516 A i User Manual 102 This Page Intentionally Left Blank ...
-
ATEN Technology KH1508Ai - page 115
103 Chapter 8 User Management Overview When you select the User Management tab the screen comes up with the Users page displayed: Browser GUI AP GUI Users appear in the panel at the left of the page. The lar ge panel at the right provides more detailed information at-a-glance for each. The buttons below the main panel are used to manage use ...
-
ATEN Technology KH1508Ai - page 116
KH1508 A i / KH1516 A i User Manual 104 Users The KH1508 A i / KH1516 A i supports two types of user, as shown in th e table, below: Adding Users To add user, and assign u ser permissions, do the following: 1. Select Users on the menu bar (Browser GUI) – or – Select Users in the Sidebar (AP GUI ). 2. T o add a user , click Add at the bottom of ...
-
ATEN Technology KH1508Ai - page 117
Chapter 8. User Management 105 3. Enter the required informatio n in th e appropriate fields. A description of each of the fields is given in the table below: Field Description Username Enter a username with a minimum of 6 and maximum of 16 characters. Password Enter a password with a minimum of 6 and maximum of 16 characters. Confirm Password T o ...
-
ATEN Technology KH1508Ai - page 118
KH1508 A i / KH1516 A i User Manual 106 4. When your selections have been made cl ick Save . 5. When the Operation Succeeded message appears, click OK . 6. Click Users in the Sidebar to return to the main screen. The new user appears in the Sidebar list and in the m ain panel, as well. The Sidebar Users list can expand and collapse . If the lis ...
-
ATEN Technology KH1508Ai - page 119
Chapter 8. User Management 107 In the main panel, select the user ’ s name 2. Click Modify . 3. In the User page that com es up, make your changes, then click Save . Note: The User page is discussed on page 104; the Devices page is discussed on page 108. Deleting User Account s To delete a user account do the fo llowing: 1. In the main p anel, se ...
-
ATEN Technology KH1508Ai - page 120
KH1508 A i / KH1516 A i User Manual 108 Device Assignment When a user logs in to the KH1508 A i / KH1516 A i, the interface comes up with the Port Access page displayed. All the ports that the user is permitted to access are listed in the Sidebar at the left of the page. Access permissions for those ports and the devices connected to them are assig ...
-
ATEN Technology KH1508Ai - page 121
Chapter 8. User Management 109 4. Make your permission settings for each port according to the information provided below: 5. When you have finished making you r choices, click Save . 6. In the confirmation pop up that appears, click OK . Note: In any of the columns, you can use Sh ift-Click or Ctrl-Click to select a group of ports to configure. Cl ...
-
ATEN Technology KH1508Ai - page 122
KH1508 A i / KH1516 A i User Manual 110 This Page Intentionally Left Blank ...
-
ATEN Technology KH1508Ai - page 123
111 Chapter 9 Device Management KVM Devices Device Informati on The Device Management page opens with the top level K H1508 A i / KH1516 A i selected in the Sidebar and the Device Configuration item selected on the menu bar: Browser GUI AP GUI ...
-
ATEN Technology KH1508Ai - page 124
KH1508 A i / KH1516 A i User Manual 112 General The General section of the Device Management page d isplays the name of the selected device, its firmware version, and information abo ut its network configuration. Note: The AP GUI vers ion presents the same information as the Brows er version. Scroll through the list to see the addition al entries. ...
-
ATEN Technology KH1508Ai - page 125
Chapter 9. Device Management 113 Network The Network page is used to specify the network environment. Each of the elements on this page is descri bed in th e sections t hat follow. ...
-
ATEN Technology KH1508Ai - page 126
KH1508 A i / KH1516 A i User Manual 114 IP Installer The IP Installer is an external Windows-b ased utility for assign ing IP addresses to the KH1508 A i / KH1516 A i. Click one of the radio buttons to select Enable , View Only , or Disable for the IP Installer utility. See IP Installer , page 173, for IP I nstaller details. Note: 1. If you select ...
-
ATEN Technology KH1508Ai - page 127
Chapter 9. Device Management 115 Network Config uration IPv4 Settings IP Address: IPv4 is the traditional method of specifying IP addresses. The KVM Over the NET™ switch can either have its IP address assigned dynamically (DHCP), or it can be given a fixed IP address. For dynamic IP address assignment, select the Obtain IP address aut ...
-
ATEN Technology KH1508Ai - page 128
KH1508 A i / KH1516 A i User Manual 116 IPv6 Settings IP Address: IPv6 is the new (128-bit) format fo r specifying IP addresses. The KVM Over the NET™ switch can either have its IPv6 address assigned dynamically (DHCP), or it can be given a fixed IP address. For dynamic IP address assignment, select the Obtai n IP address automaticall ...
-
ATEN Technology KH1508Ai - page 129
Chapter 9. Device Management 117 ANMS The ANMS (Advanced Network Management Settings) page is used to set up login authentication and authorization ma nagement from external sources. It is organized as described, bel ow: Event Destination Log Server When Enable Log Server is checked, important tran sactions that occur on the KH1508 A i / KH1 51 ...
-
ATEN Technology KH1508Ai - page 130
KH1508 A i / KH1516 A i User Manual 118 Authentication and Au thorization Disable Local Authentication Selecting this option di sables login authentication on the KH15 08 A i / KH1516 A i. The switch can only be accessed using LDAP , LDAPS, MS Active Directory , RADIUS or CC Man agement authenticati on. RADIUS Settings T o allo w authentica ...
-
ATEN Technology KH1508Ai - page 131
Chapter 9. Device Management 119 (Continued from previous page.) 6. On the RADIUS server , Users can be authenticated with any of the following m ethods: Set the entry for the user as su/xxxx Where xxxx represents the Username gi ven to the user when the account was created on the KH1508 A i / KH1516 A i. Use the same Username on both t ...
-
ATEN Technology KH1508Ai - page 132
KH1508 A i / KH1516 A i User Manual 120 T o allo w authentication and authorizati on for the KH1508 A i / KH1516 A i via LDAP / LDAPS, refer to the information in the t able, below: (Continues on next page.) Item Actio n Enable Put a check in the Enable checkbox to allow LDAP / LDAPS authentication and authorization. T ype Click a radio button to s ...
-
ATEN Technology KH1508Ai - page 133
Chapter 9. Device Management 121 (Continued from previous page.) On the LDAP / LDAPS server, Users can be authenticated with the following method: W ith MS Active Directory schem a. CC Management Settings To allow authorization for the KH 1508 A i / KH1516 A i through a CC (Control Center) server, check Enable and fill in the CC Server’s IP a ...
-
ATEN Technology KH1508Ai - page 134
KH1508 A i / KH1516 A i User Manual 122 Security The Security page is divided into six main panel s, as described in the sections that follow. Login Failures For increased security, the Login Failures section allows adm inistrators to set policies governing what happens when a user fails to log in successfully. To set the Login Failur es policy, ch ...
-
ATEN Technology KH1508Ai - page 135
Chapter 9. Device Management 123 Login String The Login String entry field lets the super administrator specify a login string (in addition to t he IP address) that user s must add to the IP address when they access the KH1508 A i / KH1516 A i with a browser. For example, if 192.1 68.0.126 were the IP address, and abcdefg were the lo gin string, th ...
-
ATEN Technology KH1508Ai - page 136
KH1508 A i / KH1516 A i User Manual 124 Security IP and MAC Filtering IP and MAC Filters control access to the KH1508 A i / KH1516 A i based on the IP and/or MAC addresses of th e client computer s attempting to connect. A maximum of 100 IP filters and 100 MAC fi lters are allowed. If any filters have b een configured, they appear in the IP Fil ...
-
ATEN Technology KH1508Ai - page 137
Chapter 9. Device Management 125 Adding Filters T o add an IP filter, do the following: 1. Click Add . A script prompt dialog box appears. 2. Specify whether you are filtering an IPv4 or IPv 6 address. 3. Key the address you want to filter i n the From: field. T o fi lter a single IP address, click to put a check in the Single IP checkbox. ...
-
ATEN Technology KH1508Ai - page 138
KH1508 A i / KH1516 A i User Manual 126 T o add a MAC fil ter , do the following: 1. Click Ad d . A script prompt dialog box. 2. Spec ify the MAC address in the dialog box, then click OK . 3. Repeat these steps for any additiona l MAC addresses you want to filter . IP Filter / MAC Filter Conflict If there is a conflict between an IP filter and ...
-
ATEN Technology KH1508Ai - page 139
Chapter 9. Device Management 127 Encryption These flexible encryption alternati ves for keyboard/mouse and video let you choose any combination of DES; 3DES; AES; RC4; or a Random cycle of any or all of them. Enabling encryption affects system perf ormance – no encryption offers the best performance; the greater the encrypt ion the greater the ad ...
-
ATEN Technology KH1508Ai - page 140
KH1508 A i / KH1516 A i User Manual 128 Private Ce rtificat e When logging in over a secure (SSL) conn ection, a signed certificate is used to verify that the user is logging in to the intended site. For enhanced security, the Private Certificate section allows you to use your own private encryption key and signed certificate, rather th an the defa ...
-
ATEN Technology KH1508Ai - page 141
Chapter 9. Device Management 129 Port Configuration The Port Configuration page displays status inform ation and allows you to set the properties of a port that has been selected in the Sidebar. An explanation of t he configuration fields i s given in the t able, below: Field Explanation Port OS S pecif ies the operating system t hat the server on ...
-
ATEN Technology KH1508Ai - page 142
KH1508 A i / KH1516 A i User Manual 130 Date/Time The Date/Time d ialog page sets the KH 1508 A i / KH1516 A i time param eters. Set the parameters according to the information below. Time Z one T o establish the time zone that the KH1508 A i / KH15 16 A i is located in, drop down the Ti m e Z o n e li st and choose the ci ty that most closely ...
-
ATEN Technology KH1508Ai - page 143
Chapter 9. Device Management 131 Ti me To manually set the time, enter th e values in the boxes and click Set . Network Time To have the time automatically synchron ized to a network time server, do the following: 1. Check the Enable auto adjustment checkbox. 2. Drop down the time server list to select your preferred time server – or – Check th ...
-
ATEN Technology KH1508Ai - page 144
KH1508 A i / KH1516 A i User Manual 132 Set Quick V iew Port s The Quick View tab in the Device Management page lets the administrator select which po rts to incl ude as quick view ports. T o select/deselect a port as a quick view port, check the Enable Quick Vi e w box for that port. When a port has been selected as quic k view , an icon a ...
-
ATEN Technology KH1508Ai - page 145
133 Chapter 10 Log Overview The KH1508 A i / KH1516 A i logs all the events that take place on it. To view the contents of the log, click the Log tab. The device’s Log Information page, similar to the one below, app ears: Browser GUI AP GUI ...
-
ATEN Technology KH1508Ai - page 146
KH1508 A i / KH1516 A i User Manual 134 Log Information The Log page displays events that take place on the KH1508 A i / KH1516 A i, and provides a breakdown of the time, the user, and a description of each one. You can change the sort order of the display by clicking on the column headings. The log file tracks a maximum of 512 ev ents. When the li ...
-
ATEN Technology KH1508Ai - page 147
135 Chapter 11 Maintenance Overview The Maintenance function is used to upgrade firmware; backup and restore configuration and account informati on; and restore default values. Browser GUI AP GUI ...
-
ATEN Technology KH1508Ai - page 148
KH1508 A i / KH1516 A i User Manual 136 Device Firmware Upg rade As new version s of the firm ware beco me available, they can be downloaded from our website. Check the website regularly to find the latest information and packages. To upgrade the device firmware, do the followi ng: 1. Download the new firmware fi le to your computer . 2. Log in to ...
-
ATEN Technology KH1508Ai - page 149
Chapter 11. Maintenance 137 Adapter Firmware Upgrade The Adapter Firmware page is used to upgrade the firmware of the KVM Adapter Cables. To perform the upgrades, do the fo llowing: 1. Log in to the KH1508 A i / KH15 16 A i; click the Maintenance tab; and select the Adapter Firmware menu item: to bring up a list of the adapter firmware versions tha ...
-
ATEN Technology KH1508Ai - page 150
KH1508 A i / KH1516 A i User Manual 138 4. Click Upgrade Adapters to start the upgrade procedure. If you enabled Check Adapter Firmware Version, the current firmware level(s) are compared with that of the upgrade versions. If the current version is equal to, or higher th an the upgrade version, a message appears in the adapters Progress column ...
-
ATEN Technology KH1508Ai - page 151
Chapter 11. Maintenance 139 Firmware Upgrade Recovery Should the switch’s main firmware upgr ade procedure fail, and the switch becomes unusable, the following firmware upgrade recovery procedure wil l resolve the prob lem: 1. Power off the switch. 2. Press and hold the Reset Switch in (see Reset Sw itch , page 8). 3. While holding the Reset Swit ...
-
ATEN Technology KH1508Ai - page 152
KH1508 A i / KH1516 A i User Manual 140 Backup/Restore Selecting the Backup/Restore m enu item gives you the ability to back up the switch’s configuration and user profile informati on: Backup To backup the device’s settings do the following : 1. In the Password field, key in a password for the file. Note: 1. Setting a password is optional. If ...
-
ATEN Technology KH1508Ai - page 153
Chapter 11. Maintenance 141 System Operation The System Operation page lets you restore certain configuration chang es that were made to the KH1508 A i / KH1516 A i back to their original factory default values. ] The functions perfo rmed on this page are as follows: Clear Port Names: Clicking this button removes nam es that have been assigned to t ...
-
ATEN Technology KH1508Ai - page 154
KH1508 A i / KH1516 A i User Manual 142 This Page Intentionally Left Blank ...
-
ATEN Technology KH1508Ai - page 155
143 Chapter 12 Download Overview Download is used to download stand-al one AP versions of the Windows Client, the Java Client, the Log Server, and the PON AP: Click the program you want to dow nload; save it to a convenient locatio n on your hard disk, an d run it from there. ...
-
ATEN Technology KH1508Ai - page 156
KH1508 A i / KH1516 A i User Manual 144 This Page Intentionally Left Blank ...
-
ATEN Technology KH1508Ai - page 157
145 Chapter 13 Port Operation Overview After you ha ve successfully logged in (see Logging In , page 49), the KH1508 A i / KH1516 A i opens to the Port Access ta b’s Connections page, with the first KH1508 A i / KH1516 A i selected in the sidebar: Note: See Con nections , page 95 for details about the Port Access Connections page. ...
-
ATEN Technology KH1508Ai - page 158
KH1508 A i / KH1516 A i User Manual 146 Connecting to a Port All the devices, ports, and outlets that a us er is permitted to access are listed in the Sidebar at the left of the page. T o connect to a port when a device is selected in the Sidebar , double click its icon in the Sidebar; or double click an ywhere on its line entry in the main cen ...
-
ATEN Technology KH1508Ai - page 159
Chapter 13. Port Operation 147 The Port T oolbar The KH1508 A i / KH151 6 A i interface provides a toolba r to help you with port switching operations from within the captured p ort. To bring up the toolbar, tap the GUI Hotkey (Scroll Lock or Ctrl), twice. The toolbar appears at the upper left corner of the screen: Depending on the setting s that w ...
-
ATEN Technology KH1508Ai - page 160
KH1508 A i / KH1516 A i User Manual 148 The T oolbar Icons The meanings of the toolbar icons are explained in the table below. Icon Purpose Click to switch to the previous station on the installation without having the recall the Port Access page. Click to switch to the next station on the installation without having to recall the Port Access page. ...
-
ATEN Technology KH1508Ai - page 161
Chapter 13. Port Operation 149 T oolbar Hotkey Port Switching When the toolbar disp lays, you can use ho tkeys to provide KVM focus to a port directly from the keyboard. The KH1508 A i / KH1516 A i provi des the following hotkey features: Going directly to a port by keyin g in its port number and clicking Enter . Auto Scanning Skip Mode ...
-
ATEN Technology KH1508Ai - page 162
KH1508 A i / KH1516 A i User Manual 150 Pausing Auto Scan While you are in Auto Scan Mode, you can pause the scanning in order to keep the focus on a particular server by press ing P . During the time that Auto Scanning is paused, the S in front of t he Port ID b links On and Off. Pausing when you want to keep the focu s on a particular server ...
-
ATEN Technology KH1508Ai - page 163
Chapter 13. Port Operation 151 Recalling the Port Ac cess Page To dismiss the toolbar and bring back the Port Access page, do one of the following: T ap the GUI Hotkey once. From the toolbar , click the icon th at recalls the Port Access page (see The Toolbar Icons , page 148). The toolbar closes, and the Port Access Page appears. GUI Hotke ...
-
ATEN Technology KH1508Ai - page 164
KH1508 A i / KH1516 A i User Manual 152 Panel Array Mode Clicking the toolbar's Panel icon invokes Panel Array Mode. Under this mode, the screen divides into a grid of panels: Each panel represents one of the switch’s port s beginning with Port 1 at the upper left, and going from left to right; top to bott om. The number of panels in ...
-
ATEN Technology KH1508Ai - page 165
Chapter 13. Port Operation 153 Panel Array T ool bar The panel array toolbar provides shortcut navi gation and control of the panel array. The toolbar can be dragged anywhere on the screen. Mousing over an icon brings up a “to oltip” that provides a short description of the icon’s function. The icon functions are described in the table below: ...
-
ATEN Technology KH1508Ai - page 166
KH1508 A i / KH1516 A i User Manual 154 Multiuser Operation The KH1508 A i / KH1516 A i supp orts multiuser operation. When multiple u sers simultaneously access the switch from client computers, the rules of precedence that apply are show n in the following table: Operation Rule General The switches utilize a si ngle shared bus implementation – ...
-
ATEN Technology KH1508Ai - page 167
155 Chapter 14 The Log Server The Windows-based Log Server is an admin istrative utility that records all the events that take place on selected KH1508 A i / KH15 16 A i units and writes them to a searchable database. This chapter describes how to install and configure the Log Server. Inst allation 1. Log into the KH1508 A i / KH1516 A i (see page ...
-
ATEN Technology KH1508Ai - page 168
KH1508 A i / KH1516 A i User Manual 156 St arting Up To start the Log Server, eith er double click the program icon, or key in th e full path to the p rogram on the com mand line . The first time you run it, a screen similar to the one below appears: Note: 1. The MAC address of the Log Server computer must be specified in the ANMS settings – see ...
-
ATEN Technology KH1508Ai - page 169
Chapter 14. The Log Server 157 The Menu Bar The Menu bar consists of four it ems: Configure Events Options Help These are discussed in the sec tions that follow. Note: If the Menu Bar appears to be disa bled, click in the List window to enable it. Configure The Configure menu co ntai ns three items: Add; Edit; and De lete. They are ...
-
ATEN Technology KH1508Ai - page 170
KH1508 A i / KH1516 A i User Manual 158 A descriptio n of the fields is gi ven in the table, below: Fill in or modify th e fields, then click OK to finish. Event s The Events Menu h as two items: Search and Maintenance . Search: Search allows you to search for events co ntaining specific words or strings. When you access this function, a screen , s ...
-
ATEN Technology KH1508Ai - page 171
Chapter 14. The Log Server 159 A description of the items is given in the table, below: Maintenance: This function allow s the administrator to p erform manual mai ntenance of the database, such as erasing specified reco rds before their expiration time is up. Item Description New search This is one of three radio buttons tha t define the scope of ...
-
ATEN Technology KH1508Ai - page 172
KH1508 A i / KH1516 A i User Manual 160 Options Network Retry allows you to set the number of seconds that the Log Server should wait before at tempting to connect if its previ ous attemp t to conne ct failed. When you click this item, a dialog bo x, similar to the one below, appears: Key in the number of seconds, then click OK to finish. Help From ...
-
ATEN Technology KH1508Ai - page 173
Chapter 14. The Log Server 161 The Log Server Main Screen Overview The Log Server Main Screen is divided into two main panels. The upper (List) panel lists all of the units that have been selected for the Log Server to track (see Configure , page 157). The lower (Event) panel displays the tick informati on for the currently selected unit. ( ...
-
ATEN Technology KH1508Ai - page 174
KH1508 A i / KH1516 A i User Manual 162 The List Panel The List panel co ntains six fields: The Event Panel The lower panel displays log events for th e currently selected un it. Note that if there are more than one units, even though they aren't currently selected, if their Recording checkbox is checked, the Log Server records their log event ...
-
ATEN Technology KH1508Ai - page 175
163 Appendix Safety Instructions General This product is for indoor use only . Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the dev ice. Do not place the device on any unstable su rf ace (cart, stand, table, etc.). If the device falls, serious damage wi ll result. ...
-
ATEN Technology KH1508Ai - page 176
KH1508 A i / KH1516 A i User Manual 164 If an extension cord is used with this device make sure that the total of the ampere ratings of all products us ed on this cord does not exceed the extension cord ampere rating. Mak e sure that the total of al l products plugged into the wall outlet does not exceed 15 amperes. T o help protect your sy ...
-
ATEN Technology KH1508Ai - page 177
Appendix 165 Rack Mounting Before working on the rack, ma ke sure that the stabilizer s are secured to the rack, extended to the floor , and that the full w eight of the rack rests on the floor . Install front and side stabilizers on a single rack or front stabilizers for joined multiple ra cks before work ing on the rack. Always load the r ...
-
ATEN Technology KH1508Ai - page 178
KH1508 A i / KH1516 A i User Manual 166 T echnical Support International For online technical support – including troubleshooting, docume ntation, and software updates: http://support.aten.com For telephone support, see Telephone Suppo rt , page iii. North America When you contact u s, please have the followin g information ready beforeh ...
-
ATEN Technology KH1508Ai - page 179
Appendix 167 T roubleshooting Administration General Operation Problem Resolution After upgrading firmware, the KH1508 A i / KH1516 A i still appears to be using the old firmware version. Y our Internet browser is displaying cached web pages – not new ones. Clear your browser cache; delete all temporary Internet files and cookies, close the Inter ...
-
ATEN Technology KH1508Ai - page 180
KH1508 A i / KH1516 A i User Manual 168 The Windows Client The Java Client For connection and operation pr oblems, see the table below: Problem Resolution won't connect to the KH1508 A i / KH1516 A i. DirectX 8.0 or higher must be installed on your computer . Remote mouse pointer is out of sync. 1. Use the AutoSync feature (see Video Settings ...
-
ATEN Technology KH1508Ai - page 181
Appendix 169 The Log Server Panel Array Mode Problem Resolution The Log Server program does not run. The Log Server requires the Microsoft Jet OLEDB 4.0 driver in order to access the database. This driver is automatically installed with Windows ME, 2000, and XP . For Windows 98 and NT you w ill have to go to the Microsoft download site: http://www ...
-
ATEN Technology KH1508Ai - page 182
KH1508 A i / KH1516 A i User Manual 170 Sun Systems * These solutions work for most comm on Sun VGA cards. If using them fails to resolve the problem , consult the Sun VGA card's manual. Problem Resolution Video display problems with HDB-15 interface system s (e.g. Sun Blade 1000 servers). The display resolution should be set to 1024 x 768. Un ...
-
ATEN Technology KH1508Ai - page 183
Appendix 171 Additional Mouse Synchronization Procedures If the mouse synchronization procedures mentioned in the ma nual fail to resolve mouse pointer problems for particular compu ters, try the following: Note: 1. These procedures are to be perfor med on the computers attached to the KH1508 A i / KH151 6 A i's ports - not on the compu ter yo ...
-
ATEN Technology KH1508Ai - page 184
KH1508 A i / KH1516 A i User Manual 172 3. W indows ME / W indows 95: Set the mouse speed to the middle position; disable mouse acceleration (click Advanced to get the dialog box fo r this). 4. W indows NT / W i ndows 98: Set the mouse speed to the slowest position. 5. Sun / Linux: Open a terminal session an d issue the following command: Sun: xset ...
-
ATEN Technology KH1508Ai - page 185
Appendix 173 IP Address Determination If you are an administrato r logging in for the first time, you need to access the KH1508 A i / KH1516 A i in order to give it an IP address that users can connect to. There are three methods to choose fr om. In each case, your client computer must be on the sam e network segment as the KH1508 A i / KH1516 A i. ...
-
ATEN Technology KH1508Ai - page 186
KH1508 A i / KH1516 A i User Manual 174 3. Select the KH1508 A i / KH1516 A i in the Device List . Note: 1. If the list is empty, or your device doesn't appear, click Enumerate to refresh the Device List. 2. If there is more than one devi ce in the list, use the MAC address to pick the one you want. The KVM Over the NET™ switch’s MAC addre ...
-
ATEN Technology KH1508Ai - page 187
Appendix 175 Specifications Function KH1508 A i KH1516 A i Computer Connections Direct 8 16 Max. 128 ( via daisy chain) 256 (via daisy chain) Port Selection OSD; Hotkey; Pushbutton Connectors Console Port Keyboard 1 x 6-pin Mini-DIN Female (Purple ) 1 x USB T ype A Female (White) Video 1 x HDB-15 Female (Blue) Mouse 1 x 6-pin Mini-DIN Female (Green ...
-
ATEN Technology KH1508Ai - page 188
KH1508 A i / KH1516 A i User Manual 176 Environment Operating T emp. 0–50° C S torage T emp. -20–60° C Humidity 0–80% RH; Non-condensing Physical Properties Housing Met al Weight 2.70 kg 2.77 kg Dimensions L x W x H 43.70 x 16.10 x 4.40 cm (19"/1U) Function KH1508 A i KH1516 A i ...
-
ATEN Technology KH1508Ai - page 189
Appendix 177 T rusted Certificates Overview When you try to log in to the device from your bro wser, a Security Alert message appears to inform you that the device’s certificate is not trusted, and asks if you want to proceed. The certificate can be trusted, but the al ert is triggered because the certificate’s name is not found on Microsoft li ...
-
ATEN Technology KH1508Ai - page 190
KH1508 A i / KH1516 A i User Manual 178 Inst alling the Certificate To install the certificate, do the following: 1. In the Security Alert dialog box, click V iew Certificate. The Certificate Information dialog box appears: Note: There is a red and white X logo over the certifica te to indicate that it is not trusted. 2. Click Install Certificate . ...
-
ATEN Technology KH1508Ai - page 191
Appendix 179 5. Next, click Fini sh to complete the installatio n; then click OK to close the dialog box. Certificate T rusted The certificate is now trusted: When you click View Certificate , you can see that the red and white X logo is no longer present – further indicatio n that the certificate is trusted: ...
-
ATEN Technology KH1508Ai - page 192
KH1508 A i / KH1516 A i User Manual 180 Self-Signed Private Certificates If you wish to create your own self-sig ned encryption key and certificate, a free utility – op enssl.exe – is availa ble for do wnload over the web at www .openssl.org . To create your private key and certificate d o the following: 1. Go to the direct ory where you downlo ...
-
ATEN Technology KH1508Ai - page 193
Appendix 181 Connection T a bles The following tabl e indicates the relationshi p between the number of KH1508 A i / KH1516 A i units and the number of co mputers that they control KH1508 A i KH1516 A i No. Computers No. Computers 1 1 - 8 9 65 - 72 2 9 - 16 10 73 - 80 3 17 - 24 1 1 81 - 88 4 25 - 32 12 89 - 96 5 33 - 40 13 97 - 104 6 41 - 48 14 105 ...
-
ATEN Technology KH1508Ai - page 194
KH1508 A i / KH1516 A i User Manual 182 Supported Devices The following table represents a list of supporte d devices that can be used on a KH1508 A i / KH1516 A i installation. Note: T o connect the KH1508 A i / KH1516 A i to a Power Over the N ET™ unit, first use Cat 5e cable to connect the KH1508 A i / KH1516 A i’ s PON port to an SN0142 ada ...
-
ATEN Technology KH1508Ai - page 195
Appendix 183 Administrator Login Failure If you are unable to perform an Admini strator login (because the Username and Password information has become corrupted, or you have forgotte n it, for example), there is a procedure you can use to clear the login i nformation. Note: Performing this procedure also retu rns all settings to their defaults. To ...
-
ATEN Technology KH1508Ai - page 196
KH1508 A i / KH1516 A i User Manual 184 Limited W arranty ALTUSEN warrants this product against defects in material or workmanship for a period of one (1) year from the da te of purchase. If this pr oduct proves to be defective, contact ALTUSEN's support department for repair or replacement of your unit. ALTUSEN w ill not issue a refund. Retur ...
-
ATEN Technology KH1508Ai - page 197
185 Index A Access, 100 Access Ports, 114 Adapter cable installation, 16, 17 Adapter cables firmware upgrade recovery, 139 upgrading, 13 7 Adapter ID Function, 2 3 Adding Users, 104 Administrator Login Failure, 183 ANMS, 117 AP GUI, 63 Authentication external, 117 Auto Scanning, 30, 41, 149 Exiting, 150 Invoking, 149 Invoking Auto Scan, 41 Pausing, ...
-
ATEN Technology KH1508Ai - page 198
KH1508 A i / KH1516 A i User Manual 186 MAC, 124 Firmware upgrading, 135 Firmware Upgrade Adapters, 137 Main firmware, 136 Firmware upgrade recovery, 13 9 Forgotten Password, 183 Front View, 7 G General page, 112 GUI AP, 63 H Hardware Setup, 11 Hot Plugging Stations, 22 Hotkey, 25 Selecting the Active Port, 40 Summary Tab le, 47 Hotkey Mode Exiting ...
-
ATEN Technology KH1508Ai - page 199
Index 187 Windows Client AP, 52 Login Invalid login, 49 Login Failures, 122 Login String, 123 M MAC Filtering, 124 Macros Search, 74 Main Firmware Upgrade, 136 Managing Users, 104 Message Board Windows Client, 80 Mode, 127 Modifying user accounts, 106 Mouse DynaSync Mode, 86 Synchronization, 86 Mouse pointer type, 85 Mouse Reset, 44 N Network page, ...
-
ATEN Technology KH1508Ai - page 200
KH1508 A i / KH1516 A i User Manual 188 Restore, 140 RoHS, ii S Safety Instru ctions General, 163 Rack Mounting, 165 Scan Duration, 30 screen, refresh, 78 Search Macros, 74 Security, 122 Login string, 123 Selecting the Active Port, 40 Self-signed certifica tes, 180 Sessions, 99 Setting the Au to Scan Interval, 30, 41 Setting the Scan Interval, 30 S ...
Avez-vous une question à propos de ATEN Technology KH1508Ai?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec ATEN Technology KH1508Ai, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec ATEN Technology KH1508Ai il est probable qu’il a envie de partager la façon de le résoudre.