Français dropdown-ico

Manuel d’utilisation Phoenix Gold pt1800

24 pages 1.45 mb
Télécharger

Aller à la page of 24

Summary
  • Phoenix Gold pt1800 - page 1

    pt1250/pt1800/pt2400 Professional Stereo Power Amplifier ...

  • Phoenix Gold pt1800 - page 2

    CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous v ...

  • Phoenix Gold pt1800 - page 3

    Introduction Congratulations on your purchase of a new Carver Professional Power Amplifier. It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best in quality craftsmanship and reliable performance. The pt1250, pt1800 and, pt2400 are specially designed for pro touring applications. Their rugged construction a ...

  • Phoenix Gold pt1800 - page 4

    • features pt1 250 2 ● 465W per channel into 8 ohms 625W per channel into 4 ohms ● XLR and 1/4” TRS input connectors ● Accepts balanced or unbalanced lines ● Heavy-duty 5-way speaker binding posts ● Independent CH 1 and CH 2 Level Controls with 1 1 detented positions ● Internally configurable for Parallel Mono mode for single channe ...

  • Phoenix Gold pt1800 - page 5

    • features 3 Continuous Average Output Power, both channels driven: 465 watts per channel into 8 ohms from 20Hz to 20kHz, with no more than 0.5% THD; 625 watts per channel into 4 ohms from 20Hz to 20kHz, with no more than 0.5% THD Parallel-mono operation: 100 watts into 4 ohms from 20Hz to 20kHz, with no more than 0.5% THD 70-volt stereo: 600 wat ...

  • Phoenix Gold pt1800 - page 6

    • ...

  • Phoenix Gold pt1800 - page 7

    Power Output: Both channels: driven (20Hz-20kHz) 8 ohm/ch. 600 watts 4 ohm/ch. 900 watts 2 ohm/ch. 1100 watt Power Output: Series mono operation (20Hz-20kHz) 8 ohm 1800 watts 4 ohm 2200 watts Signal to Noise Ratio: >100dB (from rated power @ 4 Ω /A weighted) Frequency Response: 20Hz to 20kHz ±0.5dB Channel Seperation: >55db @ 1kHz Slew Rat ...

  • Phoenix Gold pt1800 - page 8

    • ...

  • Phoenix Gold pt1800 - page 9

    Power Output: Both channels driven (20Hz-20kHz) 8 ohm/ch. 750 watts 4 ohm/ch. 1200 watts 2 ohm/ch. 1500 watts Power Output: Series mono operation (20Hz-20kHz) 8 ohm 2400 watts 4 ohm 3000 watts Signal to Noise Ratio: >100dB (from rated power @ 4 Ω /A weighted) Frequency Response: 20Hz to 20kHz ±0.5dB Channel Seperation: >55db @ 1kHz Slew Ra ...

  • Phoenix Gold pt1800 - page 10

    8 2 1 3 5 4 Controls And Functions 1. CLIPPING ELIMINA TOR Pressing this switch turns on the clipping eliminator circuit. In this mode, the amplifier output remains undistorted even when overdriven by 8dB. 2. LEFT/RIGHT V OLUME CONTROLS 10-step attenuators that adjust the relative output level of the pt1250. The amount of attenuation corresponds to ...

  • Phoenix Gold pt1800 - page 11

    6. POWER CORD Connect to a properly configured outlet providing the line voltage specified for your model. 7. FAN SPEED Push-button switch that sets the idle speed of the cooling fans. For normal usage, use the low-speed position. The fan speed is proportional to the amplifier power output. 8. FUSE AC power line fuse for the pt1250. For the 120-vol ...

  • Phoenix Gold pt1800 - page 12

    10 Controls And Functions 1. POWER SWITCHES Channel 1 and Channel 2 power switches independently power up each channel. The slow start up feature of each power supply allows both switches to be pushed simultaneously . 2. SEQUENCE SWITCHES These switches make it possible to sequentially turn on and off amplifiers in one rack or multiple racks of uni ...

  • Phoenix Gold pt1800 - page 13

    11 8. XLR POLARITY SWITCH The XLR Polarity Switch conveniently configures both XLR connectors for Pin 3 +, (Pin 2-) or Pin 2 +, (Pin 3-). [the clear security cover can be installed after switches are set.] 9. INPUT CONNECTORS The pt2400/pt1800 amplifier comes equipped with XLR and Barrier inputs. The XLR connector is wired in parallel with the barr ...

  • Phoenix Gold pt1800 - page 14

    pt1 250 Inst alla tion Location and General Precautions Observe the following precautions when choosing a location for your amplifier . A. Do not expose the unit to rain or moisture. If a fluid or foreign object should enter the unit, disconnect the power plug and contact an authorized dealer or service center. Do not pull out the plug by pulling o ...

  • Phoenix Gold pt1800 - page 15

    This is infinitely preferable to breaking the ground pin off the power cord. The pt1250’s XLR connector uses the American wiring convention (pin 3 hot). Note that the pin 3 of the XLR connector cor r esponds to the tip connection on the TRS phone jack . All input connectors are connected in parallel; you can parallel the amplifier inputs by patch ...

  • Phoenix Gold pt1800 - page 16

    70V Distribution Systems The pt1250 has sufficient output voltage capability in stereo mode to drive 70-volt distribution systems without using a step-up transformer at the amplifier . The amplifier delivers 300-watts per channel to the 70-volt system. T ransformers are still required at each loudspeaker (as is the case with all 70-volt systems). B ...

  • Phoenix Gold pt1800 - page 17

    15 AC Power Considerations Ensure that the pt1800/pt2400 is plugged into an outlet capable of supplying the correct voltage specified for your model and enough current to allow full-power operation of all the amplifiers plugged into it. The current demand of a power amplifier varies depending on several factors, including the impedance of the load, ...

  • Phoenix Gold pt1800 - page 18

    This will insure that the resistance of the speaker wire is less than 5% of 4 ohms, resulting in a transmission loss of less than 0.5 dB. The multi-way binding posts can accept spade lug, bare wire or banana connections. Be sure that all the fine strands of the wire are twisted together and contained within the connector. If even one strand is loos ...

  • Phoenix Gold pt1800 - page 19

    CAUTION: In bridged mono operation, the output connections are actually a balanced output configuration. This means that both output terminals have voltage present (neither one may be grounded). 70 V olt Distribution Systems The pt2400/pt1800 have the capability of driving a 70 volt distribution system directly without the need for step up transfor ...

  • Phoenix Gold pt1800 - page 20

    Fig. 3 shows a typical set up in a 3 rack with 3 amplifiers. In this case the top amplifier is the master amplifier. Its channel 1 power switch controls the power up and power down sequence for the whole rack and possibly additional racks. Channel 2 may be used as an optional backup for channel 1. All other amplifiers have power switches turned off ...

  • Phoenix Gold pt1800 - page 21

    Oper a ting Tips Using the pt1250/pt1800/pt2400 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • V erify that all switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want. • When you power the system up f ...

  • Phoenix Gold pt1800 - page 22

    Distortion Distortion is usually caused by excessive loss in the input controls (the mixer/equalizer/crossover can’t produce enough output), overdriving resulting in output clipping, or current limiting caused by excessively low load impedances. 1. Check the setting of the Input Level controls. If set too low, the preceding piece of equipment may ...

  • Phoenix Gold pt1800 - page 23

    W arranty Informa tion Professional Power Amplifiers: 5 years WHA T IS COVERED: THIS W ARRANTY COVERS DEFECTS IN MATERIALAND WORKMANSHIP ONL Y. This limited W arranty DOES NOT extend to: 1) Damage caused by shipment, 2) damage caused by accident, misuse, abuse, failure to perform owner maintenance, or operation contrary to the instructions in the C ...

  • Phoenix Gold pt1800 - page 24

    Part #8100.0089 Rev. B 5 Y ear W arranty 1 8 0 DA Y P erformance Guarantee Made In America A Division Of Phoenix Gold International, Inc. 9300 North Decatur ● Portland OR 97203 ● T el: 503.978.3344 ● Fax: 503.978.3302 ...

Fabricant Phoenix Gold Catégorie Stereo Amplifier

Les documents que nous recevons du fabricant de l'appareilPhoenix Gold pt1800 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Phoenix Gold
- manuels d’utilisations pt1800
- fiches produit Phoenix Gold
- dépliants
- ou étiquettes-énergie Phoenix Gold pt1800
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Phoenix Gold pt1800.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Phoenix Gold pt1800, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Phoenix Gold pt1800. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Phoenix Gold pt1800.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Phoenix Gold pt1800, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Phoenix Gold pt1800 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Phoenix Gold pt1800.

Le manuel d’utilisation complet Phoenix Gold, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Phoenix Gold pt1800 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Phoenix Gold pt1800, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPhoenix Gold pt1800 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Phoenix Gold pt1800 - qui devraient nous aider dans les premières étapes lors de l'utilisation Phoenix Gold pt1800
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Phoenix Gold pt1800
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Phoenix Gold pt1800 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Phoenix Gold pt1800?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Phoenix Gold pt1800, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Phoenix Gold pt1800 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)