Manuel d’utilisation Sony CFD-G30

36 pages 0.5 mb
Télécharger

Aller à la page of 36

Summary
  • Sony CFD-G30 - page 1

    3-043-357- 11 (1) ©1999 Sony Corporation CD Radio Cassette-Cor der Operating Instructions CFD-G30 CFD-G50 ...

  • Sony CFD-G30 - page 2

    Introduction 2 Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to a ...

  • Sony CFD-G30 - page 3

    3 Introduction Basic Operations T able of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player 12 Using the display 13 Locating a specific point in a track 14 Playing tracks repeatedly (Repeat Play) 15 Playing tracks in random order (Shuffle Play) 16 Creating your own program (Progr ...

  • Sony CFD-G30 - page 4

    Basic Operations 4 Playing a CD Basic Operations Display Playing time Track number With the label side up 3 1, 2 Connect the supplied AC power cord (see page 23). 1 Press Z PUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment. 2 Close the lid of the CD compartment. 3 Press u . The player turns on (direct power-on) ...

  • Sony CFD-G30 - page 5

    Basic Operations Basic Operations 5 Use these buttons for additional operations To Press adjust the volume VOLUME +, – (VOL +, – on the remote, CFD-G50 only) stop playback x pause playback u ( X on the remote, CFD-G50 only) Press the button again to resume play after pause. go to the next track > go back to the previous track . remove the CD ...

  • Sony CFD-G30 - page 6

    Basic Operations 6 Listening to the radio Connect the supplied AC power cord (see page 23). 1 Press RADIO BAND•AUTO PRESET until the band you want appears in the display (direct power-on). Each time you press the button, the band changes as follows: “FM1” t “FM2” t “AM”. 2 Hold down TUNE + or – until the frequency digits begin to ch ...

  • Sony CFD-G30 - page 7

    Basic Operations Basic Operations 7 Use these buttons for additional operations To Press adjust the volume VOLUME +, – (VOL +, – on the remote, CFD-G50 only) turn on/off the radio POWER To improve broadcast reception Reorient the antenna for FM. Reorient the player itself for AM. for FM for AM Tips • The “FM1” and “FM2” bands have the ...

  • Sony CFD-G30 - page 8

    Basic Operations 8 Playing a tape Connect the supplied AC power cord (see page 23). 1 Press xZ to open the tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. 2 Press N . The player turns on (direct power-on) and starts playing. With the side you want to play facing upward Display 1 2 ...

  • Sony CFD-G30 - page 9

    Basic Operations Basic Operations 9 Use these buttons for additional operations To Press adjust the volume VOLUME +, – (VOL +, – on the remote, CFD-G50 only) stop playback xZ fast-forward or rewind the tape M or m pause playback X Press the button again to resume play after pause. eject the cassette xZ turn on/off the player POWER Tip Next time ...

  • Sony CFD-G30 - page 10

    Basic Operations 10 Recor ding on a tape Connect the supplied AC power cord (see page 23). 1 Press xZ to open the tape compartment and insert a blank tape. Use TYPE I (normal) tape only. 2 Select the program source you want to record. To record from the CD player, insert a CD (see page 4) and press x on the CD section. To record from the radio, tun ...

  • Sony CFD-G30 - page 11

    Basic Operations Basic Operations 11 3 Press z to start recording ( N is depressed automatically). Use these buttons for additional operations Tips • Adjusting the volume or the audio emphasis (see page 21) will not affect the recording level. • For the best results, use the AC power as a power source. • To erase a recording, proceed as follo ...

  • Sony CFD-G30 - page 12

    The CD Player 12 Using the display You can check information about the CD using the display. The CD Player Checking the remaining time Press DISPLAY ENT•MEMORY while playing a CD. To display Press DISPLAY ENT•MEMORY the current track number once and the remaining time on the current track* the number of tracks left twice and remaining time on t ...

  • Sony CFD-G30 - page 13

    The CD Player The CD Player 13 Locating a specific point in a track You can quickly find a specific point in a track while playing a CD. You can also locate any track using the number buttons on the remote (CFD-G50 only). To locate Press a point while listening to > (forward) or . the sound (backward) while playing and hold down until you find t ...

  • Sony CFD-G30 - page 14

    The CD Player 14 Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see pages 15 - 17). 1 Press x . “Cd” appears in the display. 2 Proceed as follows. To repeat Do this a single track 1 Press PLAY MODE• MONO/ST until “REP 1” appears. 2 Press . or > to select the track that y ...

  • Sony CFD-G30 - page 15

    The CD Player The CD Player 15 Playing tracks in random or der (Shuffle Play) You can play tracks in random order. 1 Press x . “Cd” appears in the display. 2 Press PLAY MODE•MONO/ST until “SHUF” appears in the display. 3 Press u to start shuffle play. To cancel Shuffle Play Press PLAY MODE•MONO/ST until “SHUF” disappears from the di ...

  • Sony CFD-G30 - page 16

    The CD Player 16 1 Press x . “Cd” appears in the display. 2 Press PLAY MODE•MONO/ST until “PGM” appears in the display. 3 Press the . or > then press DISPLAY ENT• MEMORY for the tracks you want to program in the order you want. 4 Press u to start program play. Cr eating your own program (Program Play) You can arrange the playing orde ...

  • Sony CFD-G30 - page 17

    The CD Player The CD Player 17 Tips • You can play the same program again, since the program is saved until you open the CD compartment. • You can record your own program. After you’ve created the program, insert a blank tape and press z to start recording. To cancel Program Play Press PLAY MODE•MONO/ST until “PGM” disappears from the d ...

  • Sony CFD-G30 - page 18

    The CD Player 18 Enjoying sound ef fects (LOOP/FLASH) (CFD-G50 only) You can repeat part of a CD (LOOP) and can “flash” the CD sound (FLASH) during playback. 1 Play a CD. 2 Press and hold LOOP or FLASH at the point you want to start the function. To Press and hold repeat a selected part of a CD LOOP “flash” the CD sound FLASH To cancel the ...

  • Sony CFD-G30 - page 19

    The Radio The Radio 19 The Radio Pr esetting radio stations You can store radio stations into the player’s memory. You can preset up to 30 radio stations, 10 for each band (FM1, FM2 and AM) in any order. RADIO BAND AUTO PRESET 1 Press RADIO BAND•AUTO PRESET until the band you want appears in the display. 2 Hold down RADIO BAND•AUTO PRESET for ...

  • Sony CFD-G30 - page 20

    The Radio 20 Playing pr eset radio stations Once you've preset the stations, use PRESET + or – to tune in to your favorite stations. 1 Press RADIO BAND•AUTO PRESET to select the band. 2 Press PRESET + or – to tune in the stored station. RADIO BAND AUTO PRESET PRESET –, + On the remote (CFD-G50 only) 1 Press BAND to select the band. 2 P ...

  • Sony CFD-G30 - page 21

    The Audio Emphasis The Audio Emphasis 21 The Audio Emphasis Selecting the sound characteristic Press SOUND repeatedly to select the audio emphasis you want. Choose To get powerful, clean sounds, emphasizing low and high range audio light, bright sounds emphasizing high and middle range audio percussive sounds, emphasizing bass audio the presence of ...

  • Sony CFD-G30 - page 22

    The Timer 22 Falling asleep to music You can set the player to turn off automatically after 10, 20, 30, 60, 90, and 120 minutes, allowing you to fall asleep while listening to music. Note When you are playing a tape using this function: If the tape length of one side is longer than the set time, the player will not go off until the tape reaches the ...

  • Sony CFD-G30 - page 23

    Setting Up 23 Setting Up Setting Up Choosing the power sour ces You can use the AC power or batteries as a power source. 1 to a wall outlet 1 Connecting the AC power cord Insert one end of the supplied AC power cord to the AC IN socket located at the rear of the player, and the other end to the wall outlet. 2 Using the player on batteries Insert ei ...

  • Sony CFD-G30 - page 24

    Setting Up 24 Choosing the power sources (continued) 3 Inserting batteries into the remote (CFD-G50 only) Insert two size AA (R6) batteries (not supplied) Replacing batteries With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones. ...

  • Sony CFD-G30 - page 25

    Setting Up 25 Setting Up Connecting optional components You can enjoy the sound from a TV or VCR through the speakers of this player. Be sure to turn off the power of each component before making connections. For details, refer to the instructions of the component to be connected. LINE Note Connect the cords firmly to avoid any malfunction. Connect ...

  • Sony CFD-G30 - page 26

    Setting Up 26 Connecting optional components (continued) Recording the sound from the connected components 1 Insert a blank cassette. 2 Press LINE to display “LInE”. 3 Press z . Recording starts. 4 Play the optional component connected to the LINE IN jack of the player. ...

  • Sony CFD-G30 - page 27

    Additional Information 27 Pr ecautions Additional Information On placement • Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. • Do not place the player on an inclined or unstable place. • Do not place anything within 10 mm of the side of the cabinet. The ven ...

  • Sony CFD-G30 - page 28

    Additional Information 28 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. • Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it ...

  • Sony CFD-G30 - page 29

    Additional Information 29 T r oubleshooting Symptom The power is not on. The power is not on, and “bAttErY” and “Error” are displayed alternately. There is no audio. Noise is heard. “no diSC“ lights in the display even when a CD is in place. The CD does not play. The sound drops out. Noise is heard. Remedy • Connect the AC power cord ...

  • Sony CFD-G30 - page 30

    Additional Information 30 Symptom The audio is weak or has poor quality. The picture of your TV becomes unstable. The tape does not move when you press an operation button. The REC z button does not function/The tape does not play. The tape does not erase completely. The tape does not record. The audio is weak/The audio quality is poor. The sound i ...

  • Sony CFD-G30 - page 31

    Additional Information 31 After trying the above remedies, if you still have problems, unplug the AC power cord and remove all the batteries. After all the indications in the display disappear, plug the power cord and insert the batteries again. If the problem persists, please consult your nearest Sony dealer. Symptom The remote does not function. ...

  • Sony CFD-G30 - page 32

    Additional Information 32 Maintenance Demagnetizing the tape heads After 20 to 30 hours of use, enough residual magnetism will have built up on the tape heads to begin to cause loss of high frequency sound and hiss. At this time, you should demagnetize the heads and all metal parts in the tape path with a commercially available tape head demagnetiz ...

  • Sony CFD-G30 - page 33

    Additional Information 33 Specifications General Speaker Full range: 10 cm (4 in.) dia., 3.2 ohms, cone type (2) Woofer: 8 cm (3 1 ⁄ 4 in.) dia., 4 ohms, cone type (1) Inputs LINE IN (stereo minijack): Sensitivity 436 mV Outputs Headphones jack (stereo minijack) For 16 - 68 ohms impedance headphones Power output (excluding for US model) Full rang ...

  • Sony CFD-G30 - page 34

    Additional Information 34 Index A Audio emphasis 21 B Batteries for player 23 for remote (CFD-G50 only) 24 C CD player 12 Choosing power sources 23 Cleaning cabinet 32 tape heads and tape path 32 Connecting AC power cord 23 Creating your own program 16 D, E Demagnetizing the tape heads 32 Display 12 F, G, H Falling asleep to music 22 FLASH 18 I, J, ...

  • Sony CFD-G30 - page 35

    Additional Information 35 ...

  • Sony CFD-G30 - page 36

    Sony Corporation Printed in China ...

Fabricant Sony Catégorie MP3 Player

Les documents que nous recevons du fabricant de l'appareilSony CFD-G30 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Sony
- manuels d’utilisations CFD-G30
- fiches produit Sony
- dépliants
- ou étiquettes-énergie Sony CFD-G30
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Sony CFD-G30.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Sony CFD-G30, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Sony CFD-G30. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Sony CFD-G30.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Sony CFD-G30, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Sony CFD-G30 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Sony CFD-G30.

Le manuel d’utilisation complet Sony, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Sony CFD-G30 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Sony CFD-G30, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSony CFD-G30 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Sony CFD-G30 - qui devraient nous aider dans les premières étapes lors de l'utilisation Sony CFD-G30
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Sony CFD-G30
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Sony CFD-G30 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Sony CFD-G30?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Sony CFD-G30, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Sony CFD-G30 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)